Parallel datapackage processing possible for file datasource in NW2004s

Hi,
We have a huge flatfile which is quite slow in loading due to the fact that it processes all datapackages serially (25.000 records each). Is it possible at all to do this in parallel like it is possible for R/3 datasources via the control parameters option (table roidocprms- ? According to the help, the customizing RSCUSTV6 is the one to be used for flatfiles but this doens't include the number of parallel processes.
If not, would it be better for the performance to use bigger package seizes for flatfiles ?
thanks

Just to clarify :
In this case we load via the old methods (infosources/update rules) so no usage of transformations and DTP's.

Similar Messages

My imac shuts down during the startup process - possible startup file corrupt..??

startup process begins normally...
grey screen - then the apple - then the spinning wheel -
sometimes shuts down during spinning wheel, sometimes it gets to the blue screen then shuts down

Zap the PRAM and Reset the SMC, then try again. If no go, Bboot with the SL install disc, launch Disk Utility, repair the disk, and restart normally. If that doesn't do the trick reinstall SL and then run Software Update if that does.

Would it be possible for time machine to back-up files from 3rd party software such as windows platform using parallel?

I'm wondering if it would be possible for time machine to back-up files from 3rd party software such as Windows XP using parallel software especially if it is isolated from mac? Any advise would be greatly aprreciated.

Short answer - yes Time Machine will backup everything within the Mac OS system.
Longer answer - Parallels creates a pvm disk image "Parallels Virtual Machine" which Time Machine backs up.
Due to the changes to the pvm file Time Machine is unable to read the minor changes and will somtimes do a full backup of it each time Time Machine runs and can chew through Back up drive space quite quickly.

Since the FF8 update, all bookmarks were lost and none of the recommended methods for restoring lost bookmarks work; I always get "Unable to process to backup file" even though the backup .json files still exist

Since a FF8 update, all bookmarks were lost and none of the recommended restore methods work, even though I have been able to find the backup ".json" files; I continually get "Unable to process the backup file" for all methods of importing or restoring the bookmarks from the .json files. As others note, I can also no longer add any new bookmarks to my now empty bookmarks tab. My profile has not changed, so that's not the problem. This is really a pain.

Did you try to delete the file places.sqlite to make Firefox rebuild the places.sqlite database file from a JSON backup?
*http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

Help needed for file processing using FTP

Hi All,
I am new to ODI tool and currently we are implementing one project in ODI. Could you please, any one help me on the following requirement... how to implement it?
Scenario:
i) I need to pick a file from remote host 'outbox' dir using FTP process, and place into local 'temp' dir. (I can do it with odiFTPGet tool)
ii) Change the file as per target business requirement.??? ( this step challenging me)
for ex:
if source file name : <project name>_<source ID>_<transaction name>_<unique id>.txt
target name should be : 1234_<transaction name>_<sysdate in yyyyMMddhhmmss>_<unique id>_2345.txt ( here 1234 and 2345 are hard coded values)
iii) Later move to local 'temp' to local 'outbox' dir. ( I can do it with odiFileMove tool)
iv) After successful process move the file from remote 'outbox' to remote 'archive' dir ??? (again this is challenging me).
For this my questions are:
1) How to get file name into a variable ( In one of the post , it says we need to create data model and data stores, and interface to get the file names into a file. apart from is there any easy way i can implement it in package it self?)
2) How to tokenize a long string ( i.e., need to tokenize the source file to get <unique id> and <transaction name> and map to target file name)
3) How to define implementation for Java in user function?? do we need to use class declarations and import statements?? I need a sample user function in Java.
4) How to move/rename a file in remote server?? ( need to move file from remote 'outbox' server to remote archive' dir)
5) If any step in package fails, How to get the error msg into a variable which i can use for sending mail and raise a ticket in remedy?? ( I will pass that variable to as content to mail and remedy ticket)
6) How to handle list type data (string list) by variables in ODI?? (As we can define single variable not as list.)
I am sorry to ask all my queries I a single post. But I need to solutions for all to implement this in my project.
Thanks in advance. Appreciate early response.
Regards,
Kiran.N

Can any one share your thoughts for my request.
Thanks in advance.
Regards,
Kiran

Is it possible for other people to download my files in iCloud?

is it possible for other people with different Apple ID to download my files in iCloud?

The only way for you to allow others to access iCloud documents at the moment is by trusting your Apple ID log in and password - NOT good for security as they would also have access to your e-mail/notes/calendar/address book and reminders !
With this information others could log in at this web address in just about any browser ,
click on the iWork button, select the app Notes/Pages/Keynote
https://www.icloud.com
Here they can download/upload documents.
Mouce over the document you want to download and a choice of PDF/Word (.doc) or native iWork formats can be made.Just click the download button
To upload simply drag and drop a document from Finder/Windows explorer or the desktop onto the browser window !
The missing function however is there is NO ONLINE editing !
Now if Apple would incorporate an invite and e-mail address system similar to dropbox they that would solve the security issue I think.

Is it possible for a process to participate in two separate clusters

Is it possible for a process to participate in two separate clusters? For example if our application would like to get market data in one cluster that has a separate multicast address, and post order in another.

The easiest way for a client to access multiple clusters is via Coherence*Extend:
     http://wiki.tangosol.com/display/COH33UG/Configuring+and+Using+Coherence*Extend
     The client would not be a member of the cluster, instead it would connect to the cluster via a proxy node that is in the cluster. Using <remote-cache-scheme>, you can configure a cache to point to one proxy (in cluster A) and have another cache point to another proxy (in cluster B.)
     Thanks,
     Patrick Peralta

LSMW :Is it possible to create F4 Help for File path selection

Hi All .,
Please let me know is it possible to create F4 help for file path creation in LSMW .
thanks
Sreenivas

Hi,
I don't get it.
In the step " Specify files" you will have the option to pick your flat file which is on the desktop by pressing F4 .
What is that you exactly want??
Warm regards,
Hari Kiran

Is possible control tape library slot 1 - 10 for file system backup

hi ..
i am new to osb , i just install and setup osb , i have a question as below , hope expert can help me
env: testing
rhel 5.5
tape library with 20 slot
file system backup
1. is possible osb only use slot 1 - 10 for file system backup ? amanda can control slot x - slot y for the configuration .
2. how do i label the tape for slot 1 - slot 10 by obtool ? how to control osb auto load the tape for next backup ? where to check the log say that next tape is tape-02 ?
thanks ..

hi dcooksey
how do i use list for a tape drive...for example, if you want tape drive A to only use slots 1-10 from obtool or webtool ?
becoz i new to backup solution & osb ( i always use ghost or acronis to clone the image ) , my thinking as below , pls correct me if i am wrong
slot 1 - 10 for daily backup
slot 11-16 for full system backup
slot 17 - 20 reserve ( this tape only use for full system backup before perform any application upgrade patches , )
daily backup mon - fri ( 2 week ) ( no backup on saturday and sunday ) , server application offline
full system backup friday ( 1 , 14 on calendar ) every 2 week perform full system backup after daily backup completed
for upgrade application ,
perform full system backup after daily backup , then release the server to application team to perform upgrading .
so how to set my media family for the above setting ? the slot configuration is control by media family ?
hope you can help ...

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

Parallel process define for batch job

Hi,
I would like to run a batch job with a few processes run parallel together. May I know where can i define it ? T-code ?
Regards
Lauran

Hi Lauren,
First of all there is no transaction code as such.
First of all the report that needs to be run in background should enable you to do parrallel processing. For that code has to be written accordingly.
Check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/096e92543b11d1898e0000e8322d00/content.htm
It gives details of function modules needed for this purpose.
After this you need to create a variant for the report and schedule it to run in background using either SE38 (dirrectly) or by creating a job explicitily- SM36.
A standard report that has parallel processing feature available is RBDAPP01.
Also check transactions like BD18. They also make use of parallel processing.
Regards.
Ruchit.

HT2518 I'm in the process of transferring files fm pc to mac, all connections verified and migration asst is working. HW, my outlook contacts nor email are listed as an option for transfer. Any1 else have such a plm? If so, how did you resolve?

I'm in the process of transferring files fm pc to mac, all connections verified and migration asst is working. HW, my outlook contacts nor email are listed as an option for transfer. Any1 else have such a plm? If so, how did you resolve?

I used O2M from http://www.littlemachines.com to move from Outlook to Apple Mail.
Richard

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to download the camera Raw Version 8.3 ?

While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras.

Is it possible that theseproperties are only available for files and not f

Hello All,
I have created few properties like ReqNo (takes Integer) and ReqDate (accepts Date).
I have set the above 2 properties as manadatory. Created a Group and added his goug in 'allgroups' such that I see a tab wherein I can fill in these properties.
My questions is:
<b>Is it possible that these properties are only available for files and not for folders</b>. The reason being that even if I create a new folder, I need to fill some values in the above two mentioned properties.
These properties need to be mandatory and cannot make them optional.
Please help me solve this mystery.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi Ritu,
If you only want the property to be available for files and not folders you only enter data into the "Document Validity Patterns" field in the Property config.
Regards
Paul

Error in bdc (Background processing not possible for material)

Background processing not possible for material with serial number reqmt
Message no. M7419
Diagnosis
You tried to enter the count for a material managed with serial numbers using background processing. This function is not supported.
Procedure
Use the transaction 'Enter inventory count' (MI04) to enter the count for materials managed with serial numbers.

Can You Run this BDC in Foreground Mode
I am doubtfull for that.
please check
Gaurav Sood

Parallel datapackage processing possible for file datasource in NW2004s

Similar Messages

Maybe you are looking for