Parallel extraction of data for BW3.1 and BI 7.0 from one ECC 6.0 source
We have an existing BW3.1 system and we are coming up with BI 7.0 system. Can we extract data to both BW3.1 ( all our standard datasource have enhancement) and BI7.0 from one single ECC6.0 source system. If yes, can anyone provide more info on how this is possible.
Regards,
Mark
Hi,
I assume you are asking whether multiple BI systems can be supplied data from the same source system.......
If so the answer is YES..... 1 Source system can act as a data-source for any number of source systems.
I also assume you are asking whether 2 BI systems which are of different version (3.x and 7) can be supplied data from the saem source system ?
The answer is YES. Your source system version has nothing to do with the BI version. If you have created a datasource in source system, then it can be used to pull data to both BI7 system and BW 3.x system
How it can be done.
Your datasource from the source system will already be present in the BW 3.x system, so you need to do nothin about it. Once your BI7 system is ready please establish a link to the source system in question and replicate datasources. Once you do that it will ask whether you need this datasource in 3.x (ISFS) or 7(RSDS) version. Select 7 and continue.
Then you can proceed further with modeling and data extraction.
Regards,
Pramod
Edited by: Pramod Manjunath on Sep 12, 2008 11:23 AM
Similar Messages
-
GA dates for nw2004s and erp 2005
I have been looking all over the SMP for the proposed GAA dates for NW2004s and ERP2005. Does any one know where to find these?
Hi,
No offical date has been set. The offical SAP response is Q2 2006 with a Target Completion date of May 2006.
you can check for updates on the Ramp-up home page: http://service.sap.com/rampup
Cheers,
Mike. -
Which tables are being used to extract the data for the materi Extractors
Hi
please advise which tables are used to extract the data for the extarctors
0MAT_SALES_ATTR,
0MATERIAL_ATTR,
0MAT_PLANT_ATTR
0PLANT_ATTR
,Many thanks.Hi,
Activate a database trace using ST01. Then perform the MM03 operation and goto the SD Texts tab. Now stop the trace and see if you can locate either a table or program which you can utilize in the log.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f993545a11d1a7020000e829fd11/frameset.htm
Hope this helps..
Rgs,
Ravikanth. -
What are the T-codes that contain the master data for material and vendor?
what are the T-codes that contain the master data for material and vendor?
hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat. -
The table for storing data for infocube and ODS
Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit. -
Change of method consolidation - duable data for investment and equity
Dear All!
There are: investor uniu - company A and investee unit - company B.
Company A has had 50% share in company B to 01/2010. - Equity Method.
Company A has added by 50% share in company B to 03/2010. - Puarches Method.
I use activity of investment in AFD for investment and equity. :
When I perform task consolidation of investment there is duble data for investment and equity.
And when I perform task for Change to Consolidation Group I have message Process is not nessecery.
Mabye you know why is process not nessecery?
Thank you in advance for your help.
Best regards,
anka
Edited by: Anka on Mar 25, 2011 5:07 PMDear Sir,
Thank you for your answer.
Yes, I have task for change in group consolidation with documents in the posting level 02,12,22. I did not data in group currency, when I task change in group consolidation, but only in local currency. My mistake.
I have a new question:
When I purchase new shares, which the activite of investment I must choose in AFD:
- step aqusition or increase in capitalization?
Thank you in advance for your help.
Best regards,
anka -
Problem with "Insufficient data for image" and embedded JPEG 2000 Images
I frequently download pdf from the http://www.glorecords.blm.gov web site. They are reporting a problem with Reader Reader 10.1.4 and the pdf files they have.
"("Insufficient data for image" and embedded JPEG 2000 Images)"
I am experiencing the same "Insufficient data for image" error when opening their downloaded pdf and viewing in ACROBAT X 10.1.4.
Can someone address this please?
Win 7 sp1Read this:
http://blogs.adobe.com/dmcmahon/2012/08/21/acrobat-insufficient-data-for-an-image-error-af ter-updating-to-10-1-4-or-9-5-2/ -
I am posting data for va01 and va02 using BDC session,what happens if
Hi,
I am posting some data for va01 and va02 using BDC session,but what happens if i try to post same data using call transaction.Hi,
That is just another method. You can post the data using Call Transaction as well.
Just give it a try and in case you face some problem revert back with your issue.
We will help you to solve the same.
Hope this helps!!!
Regards,
Lalit -
Attempting to purchase music on ITunes Store which I have done for years, now get message "your request could not be completed, make sure your computer date is correct and computer accepts cookies from ITunes Store." I have changed nothing. Of course the date and time are correct and my browser accepts cookies.
Now the apple support team won't even e-mail me back. Not even saying no. This is rediculus.
-
I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup
Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support -
How do I get an iPad micro sim card for Austria and Italy? We purchased one for Germany, but it doesn't cover in Austria or Italy
Compare the roaming charges from the German carrier with services like those:
http://www.abroadband.com
http://www.maxroam.com/Shop/Product/Detail.aspx?ProductId=787&cur=EUR
Otherwise buy a pre-paid micro-SIM card for the iPad in each country you visit. -
How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?
As long as your license supports both platforms you should only have to download the Mac version and install/activate using your serial number. If you need help finding a link to download the file, please indicate the PSE version you need.
-
I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?
If your budget is unlimited, look at both the retina and non-retina and make a decision based on your preferences. If funds are tight, explore the options in the refurbished section. Unless you are dealing with courses that demand specific performance parameters, any one of these options will suffice.
Ciao. -
Hello. I have an iphone5 and I use it for a hotspot for mylaptop and printer. Does any one know a device that will extend its range? I have tried a Netgear and Belkin range extenders without any luck. The Belkin was closest to working. IT could find my iphone but when it create a new network, both the laptop and printer could not find the new extended network. Thank you!
Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/
-
I hve purchased creative suite for teams and now found out that one of our employees is an apprentice and i can get his license at a reduced fee. how can I redeem what i have already paid?
The price per seat in a Team subscription remains same. It can not be altered.
http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html#Pur chase a Creative Cloud for teams membership
Regards
Rajshree
Maybe you are looking for
-
Communiaction between two applications
Hi, Could you gus please guide me how to call another application in current application. and also i want to pass values from current application to calling application. its very urgent for me. explain me how to all application(webdynpro) Thanks in a
-
Can i buy a 6th gen nano glass screen from apple for an out of warrenty ipod?
My glass screen has broken and I need a replacement, it's a simple job I can do myself but I can't find one for sale, I have the old screen out already
-
Seems like an easy question to answer but after searching the web and this site - I must not be typing in the correct key words to get an answer. I need to know what the underlying PeopleSoft table names/prefixes mean in the EPM. Example PS_*, PS_E*,
-
Hello! there is a sporadic ERROR of ESRQ In my application .I am sure that there are two,and noly two DEVICES are connected with the GPIB board.How can i deal with this problem? thanks a lot.
-
Bootcamp Failure...Help!
When I tried to install windows via bootcamp, I got a black screen with a message 'No bootable device-- insert boot disk and press any key' , even after inserting the windows disc. Anyone know how to resolve this? Also, I cannot restart into Mac O