Parallel Extractor
Hi All,
Does anybody know how to enable parallel process in data extraction?
I need to extract COPA data from SAP ECC 6.0 to SAP BW 7.0 and I want the data to be extracted in parallel. It is my knowledge that in SAP BW 7.0 I cannot set it via menu bar (please see below screen cap).
http://i144.photobucket.com/albums/r171/Spinnnzzzz/RSA1.jpg
So I looked around and found info about RSBATCH TCode. I set the LOAD_NEWDS process type to have 10 parallel processes. This created an entry in RSBATCHPARALLEL table (please see below screen cap). But when I run the infopackage the there's only 1 job created.
Please do share some insight. Thanks
Hi Durgesh,
I looked at SM37 and after setting the parallel process to 10, the difference was not significant.
Job with parallel process has been set (BIREQU_4MHYJI8VANIL23L4IUE1HLTS4) took 2328 seconds.
Job before the parallel process has been set (BIREQU_4MJY82EKOIUTYF0IP0VHA77D0) took 2425 seconds.
Please refer to below screen cap.
[SM37-After-Before|http://i144.photobucket.com/albums/r171/Spinnnzzzz/SM37_TWO_JOBS.jpg]
I also looked at the job log and it seemed like the data package extraction was still in sequential mode. Please refer to below screen cap.
[Job Log|http://i144.photobucket.com/albums/r171/Spinnnzzzz/JOB_LOG.jpg]
I checked ROIDOCPRMS table and the entry was already correct there (parallel process set to 10).
[ROIDOCPRMS table|http://i144.photobucket.com/albums/r171/Spinnnzzzz/ROIDOCPRMS.jpg]
Perhaps there's something that I miss (i.e. have to activate or do something for this setting)?
Regards,
Similar Messages
-
Accessing index directly from backing map
Hi Guys,
I have an interesting problem and would greatly appreciate some input.
I am trying to find the minimum or maximum values of a specific field from data held
in the backing map for a cache.
I have seen examples of PofValue being used to extract individual entries - or being used in
Iterators, working through the entries in the backing map.
However, I was wondering if there is a faster way to do this, given that the field I'm interested in
has an ordered index created against it.
My thoughts were along the lines of trying to extract the Mapindex entries for the field, and just then
taking the first value (which, I'm assuming, would be the smallest since the index is ordered).
Does this make sense, or do I need to abandon the idea of using the pre-existing index and just iterate through
the PofValues? Is it even possible to access the index entries for values directly from the backing map?
Many Thanks,
Adrian.Hi Adrian,
you should be able to write an index-aware filter which makes this really fast, provided that you have a sorted index on the particular attribute which sorts according to the same order (or reverse) according to which you want the least or highest value. The following Filter implementation filters for the entries with the least extracted value:
import java.util.Map;
import java.util.Set;
import java.util.SortedMap;
import com.tangosol.util.Filter;
import com.tangosol.util.MapIndex;
import com.tangosol.util.filter.ExtractorFilter;
import com.tangosol.util.filter.IndexAwareFilter;
public class LeastExtractedValueFilter extends ExtractorFilter implements IndexAwareFilter {
public LeastExtractedValueFilter(ValueExtractor extractor) {
super(extractor);
public LeastExtractedValueFilter() {
@Override
protected boolean evaluateExtracted(Object extractedValue) {
throw new UnsupportedOperationException("This filter is only usable with a sorted index");
@Override
public Filter applyIndex(Map mapIndexes, Set candidateKeys) {
MapIndex mapIndex = (MapIndex) mapIndexes.get(m_extractor);
if (mapIndex != null && mapIndex.isOrdered()) {
SortedMap reverseMap = (SortedMap) mapIndex.getIndexContents();
if (reverseMap.isEmpty()) {
candidateKeys.clear();
} else {
candidateKeys.retainAll((Set)reverseMap.values().iterator().next());
return null;
throw new UnsupportedOperationException("This filter is only usable with a sorted index");
@Override
public int calculateEffectiveness(Map mapIndexes, Set candidateKeys) {
MapIndex mapIndex = (MapIndex) mapIndexes.get(m_extractor);
if (mapIndex != null && mapIndex.isOrdered()) {
return 1;
throw new UnsupportedOperationException("This filter is only usable with a sorted index");
}You can then try to extract whatever you want from the candidates in a parallel aggregator, e.g.:
import java.io.IOException;
import java.io.Serializable;
import java.util.Collection;
import java.util.Set;
import com.tangosol.io.pof.PofReader;
import com.tangosol.io.pof.PofWriter;
import com.tangosol.io.pof.PortableObject;
import com.tangosol.util.InvocableMap;
import com.tangosol.util.ValueExtractor;
import com.tangosol.util.InvocableMap.EntryAggregator;
import com.tangosol.util.InvocableMap.ParallelAwareAggregator;
public class FirstEntryExtractorAggregator implements ParallelAwareAggregator {
public static class Parallel extends FirstEntryExtractorAggregator implements PortableObject, Serializable {
public Parallel() {
super(null);
public Parallel(ValueExtractor extractor) {
super(extractor);
@Override
public void readExternal(PofReader in) throws IOException {
extractor = (ValueExtractor) in.readObject(0);
@Override
public void writeExternal(PofWriter out) throws IOException {
out.writeObject(0, extractor);
protected ValueExtractor extractor;
public FirstEntryExtractorAggregator(ValueExtractor extractor) {
super();
this.extractor = extractor;
@Override
public Object aggregate(Set entries) {
if (!entries.isEmpty()) {
InvocableMap.Entry entry = (InvocableMap.Entry)entries.iterator().next();
return entry.extract(extractor);
return null;
@Override
public Object aggregateResults(Collection collResults) {
Comparable least = null;
for (Object object : collResults) {
least = leastOf(least, object);
return least;
private Comparable leastOf(Comparable least, Object other) {
if (other == null) return least;
Comparable compOther = (Comparable) other;
if (least == null) return compOther;
return compOther.compareTo(least) > 0 ? least : compOther;
@Override
public EntryAggregator getParallelAggregator() {
return new Parallel(extractor);
}You would then run this as:
Object leastExtractedValue = cache.aggregate(new LeastExtractedValueFilter(extractor), new FirstEntryExtractorAggregator(extractor));Best regards,
Robert
Edited by: robvarga on Sep 21, 2010 3:00 PM
Edited by: robvarga on Sep 21, 2010 7:44 PM -
To improve the performance of the extractor
Hi Team,
Currently there is one dataload which is taking 48hours to extract data from R/3 System to BI. It is based on infoset query.
The extractor uses the standard LDB : PNP, The database driver for this LDB is SAPDBPNP.
The extractor is based on PA0008 infotype.
1 tricky part of this code is that the values are not stored in the PA0008 table, but these are dynamically calculated during the infoset extract.
Could you please provide some inputs in improving the performance.
Thanks in advance.
Sunil Kumar.Since its dynamically calculated during the infoset extract, obviously it would go longer time. Because it has to calculate those many times as the no.of PERNR (in IT8).
If possible try to move those calculations to Transfer / Update Rules level.
OR
If its a non-delta datasource, try to add more infopackages (with PERNR selections) to this datasource, run them in parallel in process chain. -
How to reduce long extraction time - Generic extractor based on view
Hello. The previous thread about this error was closed without any answer.
I'm in the same configuration.
"Using a generic extractor (Delta enabled on confirmation date) based on view to load data from ECC6 to BI.
Now my issue is that the delta extraction is running for a long time (around 1 hr) even if the data volume is very small
While checking the job overview in source system i saw that the job is hanging at the below step for almost 1 hr."
1 LUWs confirmed and 1 LUWs to be deleted with function module MF RSC2_QOUT_CONFIRM_DATA.
I am not understanding why this is happening.
Here is the log of the job:
30.05.2011 03:58:11 Job started
30.05.2011 03:58:11 Step 001 started (program SBIE0001, variant &0000000166864, user ID ALEREMOTE)
30.05.2011 03:58:11 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
30.05.2011 03:58:11 DATASOURCE = 0CO_OM_WBS_6
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 * Current Values for Selected Profile Parameters *
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 * abap/heap_area_nondia......... 4000000000 *
30.05.2011 03:58:11 * abap/heap_area_total.......... 8000000000 *
30.05.2011 03:58:11 * abap/heaplimit................ 100000000 *
30.05.2011 03:58:11 * zcsa/installed_languages...... DEFS *
30.05.2011 03:58:11 * zcsa/system_language.......... E *
30.05.2011 03:58:11 * ztta/max_memreq_MB............ 2047 *
30.05.2011 03:58:11 * ztta/roll_area................ 6500000 *
30.05.2011 03:58:11 * ztta/roll_extension........... 2000000000 *
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
30.05.2011 05:02:53 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 171 records
30.05.2011 05:02:53 Result of customer enhancement: 171 records
30.05.2011 05:02:53 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 171 records
30.05.2011 05:02:53 Result of customer enhancement: 171 records
30.05.2011 05:02:53 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 2, IDoc No. 4667050, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 03:58:11, End = 30.05.2011 03:58:11
30.05.2011 05:02:53 tRFC: Data Package = 1, TID = AC11082D38B44DE308DD028A, Duration = 00:00:00, ARFCSTATE = RECORDED
30.05.2011 05:02:53 tRFC: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Altogether, 0 records were filtered out through selection conditions
30.05.2011 05:02:53 Asynchronous transmission of info IDoc 3 in task 0003 (0 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 3, IDoc No. 4667051, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Synchronized transmission of info IDoc 4 (0 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 4, IDoc No. 4667052, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Job finished
Thanks for your help.
YannParth Kulkarni,
following the note and the other thread, I've check the index 4 of the table COEP.
Here is what I got:
Index ID COEP - 4
Short text MANDT/TIMESTMP/OBJNR, Index for Delta read method (CO-PA)
Last changed SAP 04.01.2010
Status Active Saved
Does not exist in the database
DB index nme
Not defined as DB index in the ABAP Dictionary
Is the fact that it doesn't exist in the database a problem ?
Is the fact that it is active is good enough ?
By the way thanks for your speedy reply !
Yann
Edited by: Yann GOFFIN on May 30, 2011 1:35 PM -
Specific extractor works in DEV but not in QUAL
Hello Everybody
I have new problem : I created a specific extractor ZCRM_SRV_PROCESS_I based on specific FM based on RSAX_BIW_GET_DATA_SIMPLE.
This extractor have to retrieve specific fields of Service Order Item (linked document type BUS2000116)
In DEV it works fine for loading INIT & DELTA
In QUAL, loading INIT does not work but loading works for some records...
Loading finish with following message :
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Job is cancelled in source system with small text :
19.04.2011 14:51:05 Job started
19.04.2011 14:51:05 Step 001 started (program SBIE0001, variant &0000000022545, user ID ALEREMOTE)
19.04.2011 14:51:05 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
Do you know why it works in DEV but not in QUAL ?
Thank you
Cyril
Edited by: cyril meslin on Apr 20, 2011 9:53 AMThere is no problem of authorization. In RSA3 it's ok for some records but too long for full of records.
In fact, my FM make a first select after to be determined init or delta mode :
IF i_updmode = 'D'.
SELECT i~guid h~object_id h~guid h~process_type
INTO TABLE st_zcrmt_bw_i
FROM crmd_orderadm_h AS h
INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
WHERE h~object_id IN lr_object_id
AND h~changed_at >= lv_timestp
AND i~guid IN lr_item_guid
AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
AND ( h~process_type = 'ZSOL'
OR h~process_type = 'ZSPE'
OR h~process_type = 'ZSVO'
OR h~process_type = 'ZSVT' ).
ELSE.
SELECT i~guid h~object_id h~guid h~process_type
INTO TABLE st_zcrmt_bw_i "PACKAGE SIZE I_MAXSIZE
FROM crmd_orderadm_h AS h
INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
* UP TO I_MAXSIZE ROWS
WHERE h~object_id IN lr_object_id
AND i~guid IN lr_item_guid
AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
AND ( h~process_type = 'ZSOL'
OR h~process_type = 'ZSPE'
OR h~process_type = 'ZSVO'
OR h~process_type = 'ZSVT' ).
ENDIF.
Then FM CRM_ORDER_READ is running for 500 records to retrieve header data :
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
iv_no_auth_check = abap_true
it_header_guid = it_guids "500 records
it_requested_objects = lt_requested_objects
IMPORTING
et_orderadm_h = lt_orderadm_h
et_service_os = lt_service_os.
Then this FM is running for 10 records for item data (max 10 because FM CRM_ORDER_READ does not work for more records) :
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
iv_only_spec_items = abap_true
it_item_guid = it_guids "10 records
it_requested_objects = lt_requested_objects
IMPORTING
et_orderadm_i = lt_orderadm_i
et_sales = lt_sales
et_appointment = lt_appointment
et_status = lt_status
et_text = lt_text
et_subject = lt_subject
et_doc_flow = lt_doc_flow
et_customer_i = lt_customer_i
Perhaps if I succeeded to improve SELECT & call of CRM_ORDER_READ, it would be better but I don't know how to do... -
Framemaker and Parallels for mac
(moving this over from another thread)
We decided to go with Framemaker and mac, and I'm using Windows Parallels 5 to make that happen on a virtual machine. This works well, for the most part, as it means I dont have to leave my native (mac) environment or my mac applications including (mail etc) notifications.
I am working with Framemaker 9 - creating DITA standard xml files for a help system. So far the only technical glitch is - the edit/undo buttons are now grayed out - unaccountably.
If anyone has similar experiences - any solutions? My current Parallels 5 is up to date with recent updates.
thanks,
Johnneuropod wrote:
Peter,
Thanks so much for your reply. I tried your suggestions, but to no avail. I then spent quite a bit of quality time with Adobe technical support, and they were very helpful, and got me on my way. Just in case anyone else with similar issues should come across this thread I will describe some of the issues.
BTW - John, now that I have FM9 running, I have not experienced the nonfunctioning UNDO command that you described in the original post. Sorry. I will let you know if it occurs in a delayed fashion as yours did.
For anyone who just installed Parallels and then Windows XP, what I found out is that many of the components in XP are very old school. Flash is way out of date, Explorer is, too. This may impair the functioning of the extractor, I am not sure. As a Mac user, some of these issues were foreign to me. I just wanted to run Windows so I could use FrameMaker on my Mac.
First I had to update Flash, and to do this I downloaded the latest version of the FireFox-Mozilla web-browser (or you could update MS Explorer).
Once we had all of these components up-to-date, we were still running into problems with file extraction, and the Tech Support person had me load a program called WinRAR (google it) which seemed to be a more configureable extractor than the default one that comes with the FrameMaker download. Using WinRAR we extracted the files into the Programs folder (once WinRAR was installed, the generic box icon for the extraction program changed to a normal looking icon). This may all be possible using the default extractor, I just don't know.
And a final for-what-its worth: before going the Parallels route, I tried installing SheepShaver to run Classic on my MacBook Pro so I could continue to run my Mac copy of Frame v7. SheepShaver may be OK for getting your old games and simple programs up and running, but it did not seem anywhere near stable enough to get something like FrameMaker running with a long document with graphics and cross references.
Final working configuration: FrameMaker 9 on Win XP SP2 on Snow Leopard 10.6.3 on a 17" MacBook Pro with Intel Core i7 processors (April 2010 model) and Parallels 5, 8 GB RAM. Seems to work so far, I have imported my old FrameMaker 7 Mac files (didn't even have to save them as MIFs!). Now I need to relearn Frame in the "Parallel" universe of Windows.
Time spent monkeying around with SheepShaver, trying InDesign as a substitute for FrameMaker (close, but not close enough), downloading and installing Parallels/Windows XP and trying all kinds of tricks to get iFrameMaker running and then being on-hold/on-line with Adobe tech support: 16+ hours.
Getting FrameMaker running again on my main machine: Priceless!
-Mark Greenberg
Hi, Mark:
I wish everyone keeps a copy of this post, so they could present your positive Adobe tech-support experience when someone posts a polar-opposite bad Adobe tech-support experience.
D'ja ever notice that you find something that you lost in the last place you looked? Because you don't need to look further, right? Glad you got a working combination.
I didn't have any special problems installing Parallels, Windows XP, and FrameMaker on my Mac (hardware and OS described in another post on this thread,) but I've been bi-platform for a long time. Actually, I began with Virtual PC on a much weaker Mac running OS 9 years ago, which I abandoned because of the poor performance, due almost entirely to the underpowered Mac. On my current Mac, I began with VMware's Fusion 2, then 3, but found it quirky enough to try Parallels5, which seemed smoother, and offered an inexpensive side-grade, followed by inexpensive deals to upgrade to Parallels 6.
I'm interested in what shortcomings you found with InDesign for your purposes. If you think not too many folks would be interested, please send private forum email by clicking on my name and looking for send private message.
Regards,
Peter
Peter Gold
KnowHow ProServices -
Hi All,
I need some help to interpret the below job log.
A considerable amount of time i.e. 4 hours is being spent in calling the customer enhancement EXIT_SAPLRSAP_001.
Previously this activity didnot consume such huge time.
We tried checking the TRFCs and short dumps also.
When we checked the process overview in sm50 - the sequential read was working fine.
Not able to interpret where exactly the time is being spent.
Appreciate your help on this.
Date Time Message
03.02.2011 02:20:58 Job started
03.02.2011 02:20:58 Step 001 started (program SBIE0001, variant &0000000010155, user ID BIRFC)
03.02.2011 02:20:58 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
03.02.2011 02:20:58 DATASOURCE = 0PA_ER_2
03.02.2011 02:20:58 RLOGSYS = BICLNT100
03.02.2011 02:20:58 REQUNR = REQU_EMKACN0684E0YS8255NDE5PWP
03.02.2011 02:20:58 UPDMODE = F
03.02.2011 02:20:58 LANGUAGES = *
03.02.2011 02:20:58 *************************************************************************
03.02.2011 02:20:58 * Current Values for Selected Profile Parameters *
03.02.2011 02:20:58 *************************************************************************
03.02.2011 02:20:58 * abap/heap_area_nondia......... 4000000000 *
03.02.2011 02:20:58 * abap/heap_area_total.......... 0 *
03.02.2011 02:20:58 * abap/heaplimit................ 40000000 *
03.02.2011 02:20:58 * zcsa/installed_languages...... DE *
03.02.2011 02:20:58 * zcsa/system_language.......... E *
03.02.2011 02:20:58 * ztta/max_memreq_MB............ 2047 *
03.02.2011 02:20:58 * ztta/roll_area................ 6500000 *
03.02.2011 02:20:58 * ztta/roll_extension........... 4000000000 *
03.02.2011 02:20:58 *************************************************************************
03.02.2011 06:32:26 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 439,405 records
03.02.2011 06:32:26 Result of customer enhancement: 439,405 records
03.02.2011 06:32:29 PSA=0 USING & STARTING SAPI SCHEDULER
03.02.2011 06:32:29 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
03.02.2011 06:32:35 IDOC: Info IDoc 2, IDoc No. 746127, Duration 00:00:00
03.02.2011 06:32:35 IDoc: Start = 03.02.2011 02:20:58, End = 03.02.2011 02:20:58
03.02.2011 06:32:36 Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
03.02.2011 06:32:36 IDOC: Info IDoc 3, IDoc No. 746133, Duration 00:00:00
03.02.2011 06:32:36 IDoc: Start = 03.02.2011 06:32:36, End = 03.02.2011 06:32:36
03.02.2011 06:34:31 tRFC: Data Package = 1, TID = 0AD3E46709EA4D4A4C030CEA, Duration = 00:01:37, ARFCSTATE =
03.02.2011 06:34:31 tRFC: Start = 03.02.2011 06:32:54, End = 03.02.2011 06:34:31
03.02.2011 06:34:31 Synchronized transmission of info IDoc 4 (0 parallel tasks)
03.02.2011 06:34:32 IDOC: Info IDoc 4, IDoc No. 746134, Duration 00:00:01
03.02.2011 06:34:32 IDoc: Start = 03.02.2011 06:34:31, End = 03.02.2011 06:34:32
03.02.2011 06:34:32 Job finished
Regards,
ShravaniActually this is just a job log. You need to provide code of your extractor extension / customer enhancement.
Better to do SQL trace in TA ST05 to see what SQL statement are the most contributing to bottleneck. -
DIRECT MODE에서의 PARALLEL DATA LOADING
제품 : ORACLE SERVER
작성날짜 : 1999-08-10
Direct mode에서의 parallel Data Loading
=======================================
SQL*Loader는 동일 table에 대한 direct mode에서의 parallel data load를
지원하고 있다. 이는 여러 session에서 동시에 데이타를 direct mode로 올림으로써
대용량의 데이타의 로드 속도를 향상시킬 수 있다. 특히, data file을 물리적으로
다른 disk에 위치시킴으로써 더욱 큰 효과를 낼 수 있다.
1. 제약사항
- index가 없는 table에만 로드 가능
- APPEND mode에서만 가능. (replace, truncate, insert mode는 지원 안됨)
- parallel query option이 설치되어 있어야 함.
2. 사용방법
각각의 data file을 load할 control file들을 생성한 후, 차례차례 수행하면 됨.
$sqlldr scott/tiger control=load1.ctl direct=true parallel=true&
$sqlldr scott/tiger control=load2.ctl direct=true parallel=true&
$sqlldr scott/tiger control=load3.ctl direct=true parallel=true
3. constraint
- enable parameter를 사용하면 데이타 로드 작업이 모두 끝난 후, 자동으로
constraint을 enable시켜 준다. 그러나 종종 enable되지 못하는 경우가
있으므로 반드시 status를 확인해야 한다.
- primary key 나 unique key constraint이 걸려 있는 경우, 데이타 로드 후
자동으로 enable할 때, index를 생성하느라 시간이 많이 소모될 수 있다.
따라서 data만 parallel direct 모드로 로드 한 후, index를 따로 parallel로
생성하는 것이 성능 측면에서 바람직하다.
4. storage 할당 방법 및 주의사항
direct로 데이타를 로드하는 경우 다음 절차를 따라 작업한다.
- 대상 table의 storage 절에 기초해 temporary segment를 생성한다.
- 마지막 데이타 로드 작업이 끝난 후, 마지막에 할당되었던 extent의 비어 있는
즉, 사용하지 않은 부분을 trim 한다.
- temporary segment에 해당되어 있는 extent들의 header 정보를
변경하고, HWM 정보를 수정하여, 대상 table에 extent가 소속되도록 한다.
이러한 extent 할당 방법은 다음과 같은 문제를 야기시킨다.
- parallel data load에서는 table 생성 시 할당된 최초 INITIAL extent를
사용하지 않는다.
- 정상적인 extent 할당 rule을 따르지 않고, 각 process는 next extent에
정의된 크기를 할당하여 data load를 시작하고, 새로운 extent가 요구될
때에는 pctincrease 값을 기준으로 할당되게 되는데, 이는 process 간에
독립적으로 계산되어진다.
- fragmentation이 심하게 발생할 수 있다.
fragmentation을 줄이고, storage 할당을 효율적으로 하기 위해서는
- INITIAL을 2-5 block 정도로 작게 하여 table을 생성한다.
- 7.2 이상 버젼에서는 options 절에서 storage parameter를 지정하여
사용한다. 이 때 initial과 next를 동일한 크기로 주는 것이 바람직하다.
OPTIONS (STORAGE=(MINEXTENTS n
MAXEXTENTS n
INITIAL n K
NEXT n K
PCTINCREASE n))
- options 절을 control file에 기술하는 경우 반드시 insert into tables
절 다음에 기술해야 한다.First, thanks for the hints. In the meanwhile I found some other documentation regarding my issue.
As far as I understand, if I want to load parallel, I have to create multiple InfoPackes and split up the records in the selection criteria, e.g.:
- InfoPackage 1, Students 1 - 10.000
- InfoPackage 2, Students 10.001 - 20.000
...and so on.
Following that I need to create a Process Chain that starts loading all packages at the same point in time.
Now...when the extractor is called, there are two parts that it runs through:
- Initialization of the extractor
- Fetching of records
( via flag i_initflag in the extractor ).
In the initialization I want to run the pre-fetch module. I worked everything regarding that already. Only when the pre-fetch is finished, will the actual data loading start.
What I am not sure about is: Is this flag (the i_initflag mentioned above) passed for each InfoPackage that is started?
Jeroen -
Hi,
I am in need of some help. I am currently designing a new extractor for transactional data that needs to be able to handle a high volume (> 1 mil.) of records.
We have a function module that already fetches the records in the desired structure. So...I could use this FM as the extractor.
However. This FM is not the most performant. For this reason we have a prefetch FM that, based on the selection criteria, pre-fetches the data and puts it in a buffer. The first FM I mentioned then reads from the buffer instead of the DB.
So, I would need to call this pre-fetch FM once during the initialization and at the record fetching I would use the other FM...right?
Now...I saw that I can set-up the BW system smart enough so that it will load data in parallel.
Imagine I create an InfoPackage in which I define as selection options that students 1 - 100.000 need to be loaded. I start the data loading. What selection criteria are passed to the extractor. 1 - 100.000 right?
If 3 parallel threads are started, the initialization is done by the only 1 request right?
The problem I am then facing is that the buffering might take X minutes and the buffer is bypassed as the needed records are not in there yet.
I am not sure how to do this properly. Can anyone advise?
Thanks.
JeroenFirst, thanks for the hints. In the meanwhile I found some other documentation regarding my issue.
As far as I understand, if I want to load parallel, I have to create multiple InfoPackes and split up the records in the selection criteria, e.g.:
- InfoPackage 1, Students 1 - 10.000
- InfoPackage 2, Students 10.001 - 20.000
...and so on.
Following that I need to create a Process Chain that starts loading all packages at the same point in time.
Now...when the extractor is called, there are two parts that it runs through:
- Initialization of the extractor
- Fetching of records
( via flag i_initflag in the extractor ).
In the initialization I want to run the pre-fetch module. I worked everything regarding that already. Only when the pre-fetch is finished, will the actual data loading start.
What I am not sure about is: Is this flag (the i_initflag mentioned above) passed for each InfoPackage that is started?
Jeroen -
Extractor parameter "maxsize " and ABAP parameter "s_s_if-maxsize"
Hi folks
Can anyone explain how the ABAP parameter s_s_if-maxsize is populated in the FETCH of an extractor function module?
- Using RSA3 you get what you set, of course : 100 by default,
- but how does an Infopackage populate this field ?
There are many SAPNOTEs about settings MAXSIZE and MAXLINES, example
- System defaults are 10,000 and 100,000 for each
- you can set them in SBIW (ROIDOCPRMS)
- you can set them again in the infopackage (reduce MAXSIZE) per loading type
etc.
BUT :
What puzzles me is that the setting 'MAXSIZE' in ROIDOCPRMS or in the Infopackage is expressed in Kilo octets, but in the ABAP s_s_if_maxsize is a number of records.
So which is whick and how is it set at runtime in the ABAP ?
Also : Is there a way of running an infopackage in debug mode so I can see what value of s_s_if-maxsize is used in the ABAP on the OLTP system ?
Thanks for any help.
JamesThe table ROIDOCPRMS (Control parameters for data transfer from the source system) is for Performance tuning and Implementation Like
Calculation of of packet size which internally dependins on ROIDOCPRMS in the OLTP system and on Data Source specific settings in the scheduler, Number of parallel processes than
provided in SBIW, general settings extractors, MAXSIZE, data volume, OLTP, service API, data package size, package size, performance provided in the default settings (transaction SBIW) to extract the data.
RIODOCPRMS Control parameters for data transfer from the source system
SLOGSYS RSSLOGSYS CHAR 10 0 Source system
MAXSIZE RSIDOCSIZE NUMC 6 0 Maximum size of a data packet in kilo bytes
STATFRQU ROSTATFRQU NUMC 2 0Frequency with which status Idocs are sent
MAXPROCS ROMAXPROCS NUMC 2 0Maximum number of parallel processes for data transfer
BTCSYSTEM BTCTGTSYS CHAR 32 0 Target System to Run Background Job
.APPEND SATRSFPRMS STRU 0 0 BW Data Transfer Enhancement Parameter
MAXLINES ROMAXLINES NUMC 6 0 Maximum Number of Lines in a Data Packet
MAXDPAKS ROMAXDPAKS CHAR 4 0 Maximum Number of Data Packages in a Delta Request
For 3.x DB Connect DataSources, the package size that is set in view maintenance in view RSADMINCV18 applies
Info source specific values can be maintained in Scheduler
TSV_TNEW_PAGE_ALLOC_FAILED if Packet Size is Huge
Reorg ARFCSDATA & ARFCSSTATE tables
Hope this would help ..
with regards,
hari
Message was edited by:
hari k -
Extractor 0FC_BP_ITEMS - Business Partner Items Enhancement
I'm looking at using 0FC_BP_ITEMS extractor to extract Open and cleared items. Has anyone worked on the enhancement of this extractor. If so what are the steps involved in enhancing this extractor? Is it similar to the Full load extractor 0FC_CI_01 and 0FC_OP_01. Any help will be great.
Hi,
Please have alook in help.sap.com- Netweaver- BI Content-FICA.
This is not same as those two datasources which you mentioned. This datasource will give you delta records.
Regards,
Asish -
How to use one dynamic connection managers for multiple parallel data flow tasks
hi there:
I have 6 databases residing on the same server. What I want to do is call a store procedure with identical name on each database dbo schema and transport results to a centralized place. The key is to have those SPs run in parallel instead
of in sequence as each SP may take around 10 mins to finish.
The simplest way is to create 6 OLE DB connection managers and create 6 DFT tasks. However, I do not want to maintain 6 OLE DB connection managers as there is a chance to have more connection managers.
What I did so far is to create a OLD DB connection manager and use expression to set up connectionString properties so that it will get populated by variables at run time. It is fine when running all SPs in a Foreach Loop Container. However, it takes
around 60 mins to finish.
When I try to run it in parallel ( basically created 6 DFTs but use only one Dynamic Connection Manager), the connection string gets confused therefore all DFT tasks failed.
Does anyone here have some experience on this topic?
Thanks
hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Yes, basically, on the connectionString property of ONE OLEDB, you are using an expression to supply value and this expression is pointing to a variable.
In this case , you can update this variable from a table which contains many connection strings. It's good if you want to execute Store procedures in a sequential order. When in parallel mode, this will cause issues as connectionString gets overwritten.
I am thinking about using script task to exec sp.
The whole idea is that I do not want to maintain a large number of Connection Managers.
Hope it helps
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
So you are not able to run parallel executions using same conn mgmr, even with dynamic connectionstring, is that correct? Yes, script task will be a way to go if you wish to execute it in parallel, you may connect to SS and query the proper conn string with
SELECT/WHERE clause in each script > pass it to a script variable > use that script variable and execute the proc. This will require only two things to change in each script, the WHERE condition to get the conn string and the proc name (you may even
get the proc names the same way you get conn string) and everything else will be same. Let us know how that goes.
Hope no two or more procs doing insert/update/delete on the same tables. -
How can I remove Parallels from my Macbook completely?
My MBP has been booting up very slowly, and I checked Console to see what might be causing it. I saw that a lot of the registered entries were related to Parallels, so I decided to unninstall it, since I also read that many people felt that their laptop was booting up faster after removing it.
The problem is that, even after unninstalling it, the boot time is still very long! I checked Console again, and the problem is no longer Parallels components loading, but the failing of them loading. I see stuff like:
4/24/14 18:46:47.204 Parallels[180]: Failed to load kernel extension prl_hypervisor.kext
4/24/14 18:46:47.269 Parallels[183]: /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hypervisor.kext failed to load - (libkern/kext) not found; check the system/kernel logs for errors or try kextutil(8).
and I believe Parallels is slowing down the boot time even after it's been removed. I've already removed all of its components, I don't know what else to do!
I've also deleted other apps that were on Login Items.
Could you guys please give me tips on how I can improve the boot time?
I'm posting below what I got from Console:
4/24/14 18:45:42.000 bootlog[0]: BOOT_TIME 1398375942 0
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 syslogd[21]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
4/24/14 18:46:14.000 kernel[0]: Longterm timer threshold: 1000 ms
4/24/14 18:46:14.000 kernel[0]: PMAP: PCID enabled
4/24/14 18:46:14.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
4/24/14 18:46:14.000 kernel[0]: vm_page_bootstrap: 972582 free pages and 67802 wired pages
4/24/14 18:46:14.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
4/24/14 18:46:14.000 kernel[0]: zone leak detection enabled
4/24/14 18:46:14.000 kernel[0]: "vm_compressor_mode" is 4
4/24/14 18:46:14.000 kernel[0]: standard timeslicing quantum is 10000 us
4/24/14 18:46:14.000 kernel[0]: standard background quantum is 2500 us
4/24/14 18:46:14.000 kernel[0]: mig_table_max_displ = 74
4/24/14 18:46:14.000 kernel[0]: TSC Deadline Timer supported and enabled
4/24/14 18:46:14.000 kernel[0]: "name" not a kext
4/24/14 18:46:14.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
4/24/14 18:46:14.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
4/24/14 18:46:14.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
4/24/14 18:46:14.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
4/24/14 18:46:14.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
4/24/14 18:46:14.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
4/24/14 18:46:14.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
4/24/14 18:46:14.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
4/24/14 18:46:14.000 kernel[0]: calling mpo_policy_init for Sandbox
4/24/14 18:46:14.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
4/24/14 18:46:14.000 kernel[0]: calling mpo_policy_init for Quarantine
4/24/14 18:46:14.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
4/24/14 18:46:14.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
4/24/14 18:46:14.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
4/24/14 18:46:14.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
4/24/14 18:46:14.000 kernel[0]: The Regents of the University of California. All rights reserved.
4/24/14 18:46:14.000 kernel[0]: MAC Framework successfully initialized
4/24/14 18:46:14.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
4/24/14 18:46:14.000 kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
4/24/14 18:46:14.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
4/24/14 18:46:14.000 kernel[0]: ACPI: sleep states S3 S4 S5
4/24/14 18:46:14.000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
4/24/14 18:46:14.000 kernel[0]: [ PCI configuration begin ]
4/24/14 18:46:14.000 kernel[0]: console relocated to 0xf80000000
4/24/14 18:46:14.000 kernel[0]: [ PCI configuration end, bridges 12, devices 16 ]
4/24/14 18:46:14.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
4/24/14 18:46:14.000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
4/24/14 18:46:14.000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
4/24/14 18:46:14.000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
4/24/14 18:46:14.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
4/24/14 18:46:14.000 kernel[0]: BTCOEXIST off
4/24/14 18:46:14.000 kernel[0]: BRCM tunables:
4/24/14 18:46:14.000 kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
4/24/14 18:46:14.000 kernel[0]: rooting via boot-uuid from /chosen: F2B1CE87-7935-307F-B2ED-E6DF49C1DE99
4/24/14 18:46:14.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
4/24/14 18:46:14.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
4/24/14 18:46:14.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
4/24/14 18:46:14.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
4/24/14 18:46:14.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
4/24/14 18:46:14.000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffeeac312; max speed s800.
4/24/14 18:46:14.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
4/24/14 18:46:14.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500325ASG Media/IOGUIDPartitionScheme/Customer@2
4/24/14 18:46:14.000 kernel[0]: BSD root: disk0s2, major 1, minor 2
4/24/14 18:46:14.000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
4/24/14 18:46:14.000 kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
4/24/14 18:46:14.000 kernel[0]: hfs: mounted Macintosh HD on device root_device
4/24/14 18:46:14.000 kernel[0]: Waiting for DSMOS...
4/24/14 18:46:14.000 kernel[0]: VM Swap Subsystem is ON
4/24/14 18:45:46.118 com.apple.launchd[1]: *** launchd[1] has started up. ***
4/24/14 18:45:46.118 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
4/24/14 18:45:59.937 com.apple.launchd[1]: (com.parallels.desktop.launchdaemon) Unknown key for boolean: HopefullyExitsFirst
4/24/14 18:46:11.165 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
4/24/14 18:46:11.167 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
4/24/14 18:46:13.516 kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
4/24/14 18:46:13.542 Parallels[80]: Unloading kernel extension prl_netbridge.kext
4/24/14 18:46:14.210 com.apple.launchd[1]: (com.apple.Kerberos.kdc[42]) Exited with code: 1
4/24/14 18:46:14.210 com.apple.launchd[1]: (com.apple.Kerberos.kdc) Throttling respawn: Will start in 1 seconds
4/24/14 18:46:14.423 com.apple.SecurityServer[15]: Session 100000 created
4/24/14 18:46:14.426 com.apple.usbmuxd[19]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
4/24/14 18:46:14.467 configd[56]: network changed.
4/24/14 18:46:14.490 configd[56]: setting hostname to "MacBook-Pro-de-Luis-4.local"
4/24/14 18:46:14.501 Parallels[95]: Unloading kernel extension prl_vnic.kext
4/24/14 18:46:14.583 Parallels[105]: Unloading kernel extension prl_usb_connect.kext
4/24/14 18:46:14.722 Parallels[114]: Unloading kernel extension prl_hid_hook.kext
4/24/14 18:46:14.820 Parallels[123]: Unloading kernel extension prl_hypervisor.kext
4/24/14 18:46:14.887 Parallels[132]: Loading kernel extension prl_usb_connect.kext
4/24/14 18:46:15.219 kdc[137]: label: default
4/24/14 18:46:15.219 kdc[137]: dbname: od:/Local/Default
4/24/14 18:46:15.219 kdc[137]: mkey_file: /var/db/krb5kdc/m-key
4/24/14 18:46:15.219 kdc[137]: acl_file: /var/db/krb5kdc/kadmind.acl
4/24/14 18:46:15.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
4/24/14 18:46:15.000 kernel[0]: IO80211Interface::efiNVRAMPublished():
4/24/14 18:46:17.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
4/24/14 18:46:23.506 stackshot[23]: Timed out waiting for IOKit to finish matching.
4/24/14 18:46:27.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
4/24/14 18:46:28.630 com.apple.SecurityServer[15]: Entering service
4/24/14 18:46:28.750 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
4/24/14 18:46:28.757 digest-service[72]: label: default
4/24/14 18:46:28.757 digest-service[72]: dbname: od:/Local/Default
4/24/14 18:46:28.757 digest-service[72]: mkey_file: /var/db/krb5kdc/m-key
4/24/14 18:46:28.757 digest-service[72]: acl_file: /var/db/krb5kdc/kadmind.acl
4/24/14 18:46:28.760 digest-service[72]: digest-request: uid=0
4/24/14 18:46:28.762 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
4/24/14 18:46:28.771 awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
4/24/14 18:46:28.779 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
4/24/14 18:46:28.812 digest-service[72]: digest-request: netr probe 0
4/24/14 18:46:28.813 digest-service[72]: digest-request: init request
4/24/14 18:46:28.823 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
4/24/14 18:46:28.826 digest-service[72]: digest-request: init return domain: BUILTIN server: MACBOOK-PRO-DE-LUIS-4 indomain was: <NULL>
4/24/14 18:46:29.017 airportd[63]: airportdProcessDLILEvent: en1 attached (up)
4/24/14 18:46:29.000 kernel[0]: createVirtIf(): ifRole = 1
4/24/14 18:46:29.000 kernel[0]: in func createVirtualInterface ifRole = 1
4/24/14 18:46:29.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
4/24/14 18:46:29.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
4/24/14 18:46:29.000 kernel[0]: Created virtif 0xffffff801050d000 p2p0
4/24/14 18:46:29.104 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
4/24/14 18:46:29.218 locationd[40]: Location icon should now be in state 'Inactive'
4/24/14 18:46:29.864 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
4/24/14 18:46:30.011 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:46:31.012 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:46:31.344 kdc[137]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
4/24/14 18:46:31.348 systemkeychain[142]: done file: /var/run/systemkeychaincheck.done
4/24/14 18:46:31.354 configd[56]: network changed: DNS*
4/24/14 18:46:31.360 configd[56]: network changed: DNS*
4/24/14 18:46:31.361 mDNSResponder[35]: D2D_IPC: Loaded
4/24/14 18:46:31.361 mDNSResponder[35]: D2DInitialize succeeded
4/24/14 18:46:31.366 mDNSResponder[35]: 4: Listening for incoming Unix Domain Socket client requests
4/24/14 18:46:31.367 mDNSResponder[35]: Adding registration domain 291933891.members.btmm.icloud.com.
4/24/14 18:46:31.416 networkd[165]: networkd.165 built Aug 24 2013 22:08:46
4/24/14 18:46:31.436 awacsd[59]: Configuring lazy AWACS client: 291933891.p04.members.btmm.icloud.com.
4/24/14 18:46:31.450 awacsd[59]: KV HTTP 0
4/24/14 18:46:31.475 kdc[137]: KDC started
4/24/14 18:46:31.963 com.apple.InternetSharing[43]: *** no interface for service
4/24/14 18:46:36.482 awacsd[59]: KV HTTP 0
4/24/14 18:46:39.917 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
4/24/14 18:46:40.000 kernel[0]: SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
4/24/14 18:46:40.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
4/24/14 18:46:40.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
4/24/14 18:46:40.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
4/24/14 18:46:40.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
4/24/14 18:46:40.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
4/24/14 18:46:40.000 kernel[0]: Previous Shutdown Cause: 5
4/24/14 18:46:40.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
4/24/14 18:46:42.933 com.apple.InternetSharing[43]: *** no interface for service
4/24/14 18:46:44.644 com.apple.InternetSharing[43]: *** no interface for service
4/24/14 18:46:45.000 kernel[0]: IOBluetoothUSBDFU::probe
4/24/14 18:46:45.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
4/24/14 18:46:45.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x4800 ****
4/24/14 18:46:45.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x4800 ****
4/24/14 18:46:46.549 awacsd[59]: KV HTTP 0
4/24/14 18:46:46.850 com.apple.kextd[12]: kext com.protech.NoSleep 103019000 is in exception list, allowing to load
4/24/14 18:46:46.874 com.apple.kextd[12]: kext com.Cycling74.driver.WondershareAudioDevice 105029000 is in exception list, allowing to load
4/24/14 18:46:46.000 kernel[0]: init
4/24/14 18:46:46.000 kernel[0]: probe
4/24/14 18:46:46.000 kernel[0]: start
4/24/14 18:46:46.000 kernel[0]: DSMOS has arrived
4/24/14 18:46:46.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x4800
4/24/14 18:46:46.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
4/24/14 18:46:46.000 kernel[0]: com_protech_nosleepextension: setting state: 1, for mode: 0 (ac-mode)
4/24/14 18:46:46.000 kernel[0]: com_protech_nosleepextension: successfully started
4/24/14 18:46:46.926 loginwindow[38]: Login Window Application Started
4/24/14 18:46:46.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
4/24/14 18:46:46.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x6c80 -- 0x0000 -- 0x4800 ****
4/24/14 18:46:47.004 WindowServer[168]: Server is starting up
4/24/14 18:46:47.015 mds[34]: (Normal) FMW: FMW 0 0
4/24/14 18:46:47.040 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_usb_connect.kext.
4/24/14 18:46:47.041 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_usb_connect.kext.
4/24/14 18:46:47.041 com.apple.kextd[12]: Error: Kext /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_usb_connect.kext - not found/unable to create.
4/24/14 18:46:47.046 Parallels[169]: Failed to load kernel extension prl_usb_connect.kext
4/24/14 18:46:47.074 Parallels[171]: /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_usb_connect.kext failed to load - (libkern/kext) not found; check the system/kernel logs for errors or try kextutil(8).
4/24/14 18:46:47.000 kernel[0]: mTail has not been written to hardware: mTail = 0x00000000, hardare tail register = 0x00000040
4/24/14 18:46:47.171 Parallels[176]: Loading kernel extension prl_hypervisor.kext
4/24/14 18:46:47.000 kernel[0]: en4: promiscuous mode enable succeeded
4/24/14 18:46:47.194 WindowServer[168]: Session 256 retained (2 references)
4/24/14 18:46:47.194 WindowServer[168]: Session 256 released (1 references)
4/24/14 18:46:47.196 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hypervisor.kext.
4/24/14 18:46:47.197 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hypervisor.kext.
4/24/14 18:46:47.197 com.apple.InternetSharing[43]: *** no interface for service
4/24/14 18:46:47.197 com.apple.kextd[12]: Error: Kext /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hypervisor.kext - not found/unable to create.
4/24/14 18:46:47.204 Parallels[180]: Failed to load kernel extension prl_hypervisor.kext
4/24/14 18:46:47.213 WindowServer[168]: Session 256 retained (2 references)
4/24/14 18:46:47.216 WindowServer[168]: init_page_flip: page flip mode is on
4/24/14 18:46:47.254 UserEventAgent[11]: assertion failed: 13C64: com.apple.telemetry + 17682 [FDCB4ECA-3C5D-394A-BAEF-F6555BEB4239]: 0xffffffffe0000001
4/24/14 18:46:47.269 Parallels[183]: /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hypervisor.kext failed to load - (libkern/kext) not found; check the system/kernel logs for errors or try kextutil(8).
4/24/14 18:46:47.272 WindowServer[168]: Found 13 modes for display 0x00000000 [8, 5]
4/24/14 18:46:47.277 WindowServer[168]: Found 1 modes for display 0x00000000 [1, 0]
4/24/14 18:46:47.280 WindowServer[168]: Found 1 modes for display 0x00000000 [1, 0]
4/24/14 18:46:47.283 WindowServer[168]: Found 1 modes for display 0x00000000 [1, 0]
4/24/14 18:46:47.285 WindowServer[168]: mux_initialize: kAGCGetMuxState (kMuxControl, kMuxControl_switchingMode) failed (0xe0000001)
4/24/14 18:46:47.285 WindowServer[168]: mux_initialize: Mode is safe
4/24/14 18:46:47.287 WindowServer[168]: Found 13 modes for display 0x00000000 [8, 5]
4/24/14 18:46:47.288 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9004004D60 MacBook-Pro-de-Luis-4.local. (Addr) that's already in the list
4/24/14 18:46:47.289 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F90040051F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
4/24/14 18:46:47.289 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9004006960 MacBook-Pro-de-Luis-4.local. (AAAA) that's already in the list
4/24/14 18:46:47.289 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9004006DF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
4/24/14 18:46:47.291 WindowServer[168]: Found 1 modes for display 0x00000000 [1, 0]
4/24/14 18:46:47.291 WindowServer[168]: Found 1 modes for display 0x00000000 [1, 0]
4/24/14 18:46:47.292 WindowServer[168]: Found 1 modes for display 0x00000000 [1, 0]
4/24/14 18:46:47.319 WindowServer[168]: WSMachineUsesNewStyleMirroring: false
4/24/14 18:46:47.320 WindowServer[168]: Display 0x042731c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 13 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc7, S/N 0, Unit 0, Rotation 0
UUID 0xcb5a19e16c20c98ebb2d70fc3bb550b4
4/24/14 18:46:47.320 WindowServer[168]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[3840 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/24/14 18:46:47.320 WindowServer[168]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/24/14 18:46:47.320 WindowServer[168]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/24/14 18:46:47.320 WindowServer[168]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/24/14 18:46:47.321 WindowServer[168]: WSSetWindowTransform: Singular matrix
4/24/14 18:46:47.321 WindowServer[168]: WSSetWindowTransform: Singular matrix
4/24/14 18:46:47.321 WindowServer[168]: WSSetWindowTransform: Singular matrix
4/24/14 18:46:47.324 WindowServer[168]: Display 0x042731c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 13 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc7, S/N 0, Unit 0, Rotation 0
UUID 0xcb5a19e16c20c98ebb2d70fc3bb550b4
4/24/14 18:46:47.324 WindowServer[168]: Display 0x003f0040: GL mask 0x10; bounds (2304, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/24/14 18:46:47.324 WindowServer[168]: Display 0x003f003f: GL mask 0x8; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/24/14 18:46:47.324 WindowServer[168]: Display 0x003f003e: GL mask 0x4; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/24/14 18:46:47.324 WindowServer[168]: Display 0x003f003d: GL mask 0x2; bounds (2307, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/24/14 18:46:47.325 WindowServer[168]: CGXPerformInitialDisplayConfiguration
4/24/14 18:46:47.325 WindowServer[168]: Display 0x042731c0: Unit 0; Vendor 0x610 Model 0x9cc7 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
4/24/14 18:46:47.325 WindowServer[168]: Display 0x003f0040: Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
4/24/14 18:46:47.325 WindowServer[168]: Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2305,0)[1 x 1], Rotation 0, Resolution 1
4/24/14 18:46:47.325 WindowServer[168]: Display 0x003f003e: Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2306,0)[1 x 1], Rotation 0, Resolution 1
4/24/14 18:46:47.325 WindowServer[168]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2307,0)[1 x 1], Rotation 0, Resolution 1
4/24/14 18:46:47.325 WindowServer[168]: CGXMuxBoot: Unexpected boot switch return value (0xe00002c7)
4/24/14 18:46:47.409 WindowServer[168]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000001f, accelerator 0x000048b3, unit 0, caps QEX|MIPMAP, vram 451 MB
4/24/14 18:46:47.409 WindowServer[168]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000001f, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
4/24/14 18:46:47.410 WindowServer[168]: GLCompositor enabled for tile size [256 x 256]
4/24/14 18:46:47.410 WindowServer[168]: CGXGLInitMipMap: mip map mode is on
4/24/14 18:46:47.430 loginwindow[38]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
4/24/14 18:46:47.437 sudo[199]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
4/24/14 18:46:47.441 Parallels[210]: Loading kernel extension prl_hid_hook.kext
4/24/14 18:46:47.465 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hid_hook.kext.
4/24/14 18:46:47.466 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hid_hook.kext.
4/24/14 18:46:47.466 com.apple.kextd[12]: Error: Kext /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hid_hook.kext - not found/unable to create.
4/24/14 18:46:47.469 Parallels[216]: Failed to load kernel extension prl_hid_hook.kext
4/24/14 18:46:47.652 Parallels[218]: /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_hid_hook.kext failed to load - (libkern/kext) not found; check the system/kernel logs for errors or try kextutil(8).
4/24/14 18:46:47.880 Parallels[222]: Loading kernel extension prl_netbridge.kext
4/24/14 18:46:47.910 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_netbridge.kext.
4/24/14 18:46:47.910 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_netbridge.kext.
4/24/14 18:46:47.910 com.apple.kextd[12]: Error: Kext /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_netbridge.kext - not found/unable to create.
4/24/14 18:46:47.913 Parallels[226]: Failed to load kernel extension prl_netbridge.kext
4/24/14 18:46:48.049 Parallels[228]: /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_netbridge.kext failed to load - (libkern/kext) not found; check the system/kernel logs for errors or try kextutil(8).
4/24/14 18:46:48.120 Parallels[232]: Loading kernel extension prl_vnic.kext
4/24/14 18:46:48.282 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_vnic.kext.
4/24/14 18:46:48.283 com.apple.kextd[12]: Can't open CFBundle for /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_vnic.kext.
4/24/14 18:46:48.283 com.apple.kextd[12]: Error: Kext /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_vnic.kext - not found/unable to create.
4/24/14 18:46:48.286 Parallels[236]: Failed to load kernel extension prl_vnic.kext
4/24/14 18:46:48.595 Parallels[238]: /Library/Parallels/Parallels Service.app/Contents/Kexts/prl_vnic.kext failed to load - (libkern/kext) not found; check the system/kernel logs for errors or try kextutil(8).
4/24/14 18:46:48.782 Parallels[241]: Trying to load kernel extensions, exit status: 5
4/24/14 18:46:49.017 Parallels[244]: Starting Parallels networking...
4/24/14 18:46:49.063 WindowServer[168]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
4/24/14 18:46:49.104 launchctl[246]: com.apple.findmymacmessenger: Already loaded
4/24/14 18:46:49.145 com.apple.SecurityServer[15]: Session 100004 created
4/24/14 18:46:49.200 loginwindow[38]: Setting the initial value of the magsave brightness level 1
4/24/14 18:46:49.244 loginwindow[38]: Login Window Started Security Agent
4/24/14 18:46:49.262 UserEventAgent[249]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
4/24/14 18:46:49.322 WindowServer[168]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
4/24/14 18:46:49.367 WindowServer[168]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
4/24/14 18:46:49.370 SecurityAgent[255]: This is the first run
4/24/14 18:46:49.371 SecurityAgent[255]: MacBuddy was run = 0
4/24/14 18:46:49.385 WindowServer[168]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
4/24/14 18:46:49.406 WindowServer[168]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fff4be1aec0) - enabling OpenGL
4/24/14 18:46:49.411 SecurityAgent[255]: User info context values set for luisfernandolins
4/24/14 18:46:49.987 loginwindow[38]: Login Window - Returned from Security Agent
4/24/14 18:46:50.015 loginwindow[38]: USER_PROCESS: 38 console
4/24/14 18:46:50.000 kernel[0]: AppleKeyStore:Sending lock change 0
4/24/14 18:46:50.941 com.apple.launchd.peruser.501[261]: Background: Aqua: Registering new GUI session.
4/24/14 18:46:50.945 launchctl[264]: launchctl: Dubious file. Not of type .plist (skipping): /Users/luisfernandolins/Library/LaunchAgents/com.zeobit.MacKeeper.Helper
4/24/14 18:46:50.961 com.apple.launchd.peruser.501[261]: (com.spotify.webhelper) Unknown key: SpotifyPath
4/24/14 18:46:50.962 com.apple.launchd.peruser.501[261]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
4/24/14 18:46:50.963 com.apple.launchd.peruser.501[261]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
4/24/14 18:46:50.966 launchctl[264]: com.apple.pluginkit.pkd: Already loaded
4/24/14 18:46:50.966 launchctl[264]: com.apple.sbd: Already loaded
4/24/14 18:46:50.981 distnoted[266]: # distnote server agent absolute time: 70.704574643 civil time: Thu Apr 24 18:46:50 2014 pid: 266 uid: 501 root: no
4/24/14 18:46:51.641 UserEventAgent[265]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
4/24/14 18:46:51.000 kernel[0]: directed SSID scan fail
4/24/14 18:46:52.153 SystemStarter[190]: StartOuc (198) did not complete successfully
4/24/14 18:46:52.154 SystemStarter[190]: The following StartupItems failed to start properly:
4/24/14 18:46:52.154 SystemStarter[190]: /Library/StartupItems/StartOuc
4/24/14 18:46:52.154 SystemStarter[190]: - execution of Startup script failed
4/24/14 18:46:52.155 WindowServer[168]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
4/24/14 18:46:52.294 WindowServer[168]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
4/24/14 18:46:53.414 prl_net_start[247]: Failed to configure Parallels Adapter 0 for network Shared
4/24/14 18:46:53.420 prl_net_start[247]: Failed to configure Parallels Adapter 1 for network Host-Only
4/24/14 18:46:53.580 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
4/24/14 18:46:53.602 Parallels[309]: Parallels networking sucessfully started
4/24/14 18:46:53.607 sharingd[297]: Starting Up...
4/24/14 18:46:53.624 prl_naptd[307]: Starting Parallels Network Daemon
4/24/14 18:46:53.628 Parallels[311]: Restarting CiscoVPN
4/24/14 18:46:53.717 SystemStarter[315]: Unknown service: CiscoVPN
4/24/14 18:46:53.728 Parallels[318]: Starting Parallels Dispatcher Service
4/24/14 18:46:54.048 Parallels[325]: Parallels Dispatcher Service sucessfully started
4/24/14 18:46:54.074 prl_naptd[307]: BUG in libdispatch client: kevent[EVFILT_WRITE] delete: "No such file or directory" - 0x2
4/24/14 18:46:54.076 prl_naptd[307]: Failed to start: error 718; Parallels Network Daemon will restart in one minute or after receiving of some signal.
4/24/14 18:46:54.134 xpcproxy[328]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
4/24/14 18:46:54.145 com.apple.SecurityServer[15]: Session 100005 created
4/24/14 18:46:54.167 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
4/24/14 18:46:54.167 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
4/24/14 18:46:54.168 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
4/24/14 18:46:54.168 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
4/24/14 18:46:54.168 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
4/24/14 18:46:54.168 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
4/24/14 18:46:54.168 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
4/24/14 18:46:54.168 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
4/24/14 18:46:54.168 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
4/24/14 18:46:54.169 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
4/24/14 18:46:54.169 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
4/24/14 18:46:54.169 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
4/24/14 18:46:54.169 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
4/24/14 18:46:54.169 com.apple.audio.DriverHelper[295]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
4/24/14 18:46:54.207 com.apple.audio.DriverHelper[295]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
4/24/14 18:46:54.208 com.apple.audio.DriverHelper[295]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
4/24/14 18:46:54.208 com.apple.audio.DriverHelper[295]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
4/24/14 18:46:54.313 com.apple.IconServicesAgent[333]: IconServicesAgent launched.
4/24/14 18:46:54.544 WindowServer[168]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
4/24/14 18:46:54.958 xpcproxy[336]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
4/24/14 18:46:55.025 com.apple.SecurityServer[15]: Session 100008 created
4/24/14 18:46:55.390 WindowServer[168]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 1.86 seconds (server forcibly re-enabled them after 1.01 seconds)
4/24/14 18:46:55.758 SystemUIServer[280]: Cannot find executable for CFBundle 0x7fbbda58bf30 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
4/24/14 18:46:55.784 SystemUIServer[280]: Cannot find executable for CFBundle 0x7fbbda585c90 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
4/24/14 18:46:55.785 SystemUIServer[280]: Cannot find executable for CFBundle 0x7fbbda58b4f0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
4/24/14 18:46:56.032 coreaudiod[282]: 2014-04-24 06:46:56.031416 PM [AirPlay] AirPlay: Performing audio format change for 4 (AP Out) to PCM/44100/16/2
4/24/14 18:46:57.095 WindowServer[168]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
4/24/14 18:46:57.895 WindowServer[168]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 1.80 seconds (server forcibly re-enabled them after 1.00 seconds)
4/24/14 18:46:57.939 SystemUIServer[280]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
4/24/14 18:46:57.940 SystemUIServer[280]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
4/24/14 18:46:58.034 accountsd[347]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
4/24/14 18:46:58.146 com.apple.iCloudHelper[328]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
"Accept-Language" = "en-us";
"X-Mme-Client-Info" = "<MacBookPro8,1> <Mac OS X;10.9.2;13C64> <com.apple.AOSKit/176>";
"X-Mme-Country" = BR;
"X-Mme-Nac-Version" = 11A457;
"X-Mme-Timezone" = "GMT-3";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fc252e0e370 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
4/24/14 18:46:58.000 kernel[0]: MacAuthEvent en1 Auth result for: a4:b1:e9:79:78:17 MAC AUTH succeeded
4/24/14 18:46:58.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
4/24/14 18:46:58.000 kernel[0]: AirPort: Link Up on en1
4/24/14 18:46:58.000 kernel[0]: en1: BSSID changed to a4:b1:e9:79:78:17
4/24/14 18:46:58.000 kernel[0]: AirPort: RSN handshake complete on en1
4/24/14 18:46:58.491 com.apple.iCloudHelper[328]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
"Accept-Language" = "en-us";
"X-Mme-Client-Info" = "<MacBookPro8,1> <Mac OS X;10.9.2;13C64> <com.apple.AOSKit/176>";
"X-Mme-Country" = BR;
"X-Mme-Nac-Version" = 11A457;
"X-Mme-Timezone" = "GMT-3";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fc252c1da50 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
4/24/14 18:46:58.492 com.apple.iCloudHelper[328]: AOSKit ERROR: Setup request failed, appleID=1047286319, url=(null), requestHeaders=
(null),
error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7fc252c202a0 {HttpStatusCode=0, DialogInfo={
DialogType = Unknown;
}}, httpStatusCode=0, responseHeaders=
(null),
responseBody=
(null)
4/24/14 18:46:58.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
4/24/14 18:46:58.707 com.apple.SecurityServer[15]: Session 100010 created
4/24/14 18:46:59.734 com.apple.iCloudHelper[328]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
"Accept-Language" = "en-us";
"X-Mme-Client-Info" = "<MacBookPro8,1> <Mac OS X;10.9.2;13C64> <com.apple.AOSKit/176>";
"X-Mme-Country" = BR;
"X-Mme-Nac-Version" = 11A457;
"X-Mme-Timezone" = "GMT-3";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fc252f3d840 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
4/24/14 18:46:59.817 com.apple.iCloudHelper[328]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
"Accept-Language" = "en-us";
"X-Mme-Client-Info" = "<MacBookPro8,1> <Mac OS X;10.9.2;13C64> <com.apple.AOSKit/176>";
"X-Mme-Country" = BR;
"X-Mme-Nac-Version" = 11A457;
"X-Mme-Timezone" = "GMT-3";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fc252f3e850 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
4/24/14 18:46:59.818 com.apple.iCloudHelper[328]: AOSKit ERROR: Setup request failed, appleID=1647185353, url=(null), requestHeaders=
(null),
error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7fc252c1a500 {HttpStatusCode=0, DialogInfo={
DialogType = Unknown;
}}, httpStatusCode=0, responseHeaders=
(null),
responseBody=
(null)
4/24/14 18:46:59.898 com.apple.iCloudHelper[328]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
"Accept-Language" = "en-us";
"X-Mme-Client-Info" = "<MacBookPro8,1> <Mac OS X;10.9.2;13C64> <com.apple.AOSKit/176>";
"X-Mme-Country" = BR;
"X-Mme-Nac-Version" = 11A457;
"X-Mme-Timezone" = "GMT-3";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fc252f3e050 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
4/24/14 18:46:59.964 com.apple.iCloudHelper[328]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
"Accept-Language" = "en-us";
"X-Mme-Client-Info" = "<MacBookPro8,1> <Mac OS X;10.9.2;13C64> <com.apple.AOSKit/176>";
"X-Mme-Country" = BR;
"X-Mme-Nac-Version" = 11A457;
"X-Mme-Timezone" = "GMT-3";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fc252f08480 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
4/24/14 18:46:59.964 com.apple.iCloudHelper[328]: AOSKit ERROR: Setup request failed, appleID=291933891, url=(null), requestHeaders=
(null),
error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7fc252f07ad0 {HttpStatusCode=0, DialogInfo={
DialogType = Unknown;
}}, httpStatusCode=0, responseHeaders=
(null),
responseBody=
(null)
4/24/14 18:47:02.528 com.apple.launchd.peruser.501[261]: (com.parallels.desktop.client.launch[371]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
4/24/14 18:47:02.528 com.apple.launchd.peruser.501[261]: (com.parallels.desktop.client.launch[371]) Job failed to exec(3) for weird reason: 2
4/24/14 18:47:02.667 prl_naptd[370]: Starting Parallels Network Daemon
4/24/14 18:47:02.668 com.apple.launchd.peruser.501[261]: (com.apple.iTunesHelper.30304[383]) Spawned and waiting for the debugger to attach before continuing...
4/24/14 18:47:02.688 SocialPushAgent[359]: ApplePushService: APSConnection being used without a delegate queue
4/24/14 18:47:02.711 WiFiKeychainProxy[358]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
4/24/14 18:47:02.711 WiFiKeychainProxy[358]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
4/24/14 18:47:04.495 com.apple.InternetSharing[43]: *** no interface for service
4/24/14 18:47:04.500 configd[56]: network changed: DNS* Proxy
4/24/14 18:47:04.505 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'LFLINS' making interface primary (protected network)
4/24/14 18:47:04.505 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
4/24/14 18:47:04.511 UserEventAgent[11]: Captive: en1: Probing 'LFLINS'
4/24/14 18:47:04.515 configd[56]: network changed: v4(en1!:192.168.1.72) DNS+ Proxy+ SMB
4/24/14 18:47:05.355 com.apple.time[265]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
4/24/14 18:47:05.390 configd[56]: setting hostname to "mbp-de-luis-4.lan"
4/24/14 18:47:05.414 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
4/24/14 18:47:08.733 com.apple.time[265]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
4/24/14 18:47:08.747 com.apple.launchd.peruser.501[261]: (com.apple.mrt.uiagent[362]) Exited with code: 255
4/24/14 18:47:08.780 ntpd[186]: proto: precision = 1.000 usec
4/24/14 18:47:08.974 secd[342]: __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1020 - Remote error : Network unreachable)
4/24/14 18:47:08.975 secd[342]: __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1020 - Remote error : Network unreachable)
4/24/14 18:47:09.065 airportd[63]: _doAutoJoin: Already associated to “LFLINS”. Bailing on auto-join.
4/24/14 18:47:10.326 com.apple.internetaccounts[336]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
4/24/14 18:47:10.326 com.apple.internetaccounts[336]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
4/24/14 18:47:10.375 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
4/24/14 18:47:10.920 REUpdater[372]: VERSION is 141
4/24/14 18:47:12.143 AirPlayUIAgent[330]: 2014-04-24 06:47:12.143216 PM [AirPlayUIAgent] Changed PIN pairing: no
4/24/14 18:47:12.962 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
4/24/14 18:47:15.033 secd[342]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
4/24/14 18:47:15.033 secd[342]: securityd_xpc_dictionary_handler WiFiKeychainProx[358] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
4/24/14 18:47:15.060 com.apple.time[265]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
4/24/14 18:47:15.275 AirPlayUIAgent[330]: 2014-04-24 06:47:15.275080 PM [AirPlayUIAgent] Changed PIN pairing: no
4/24/14 18:47:17.030 syncdefaultsd[321]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
4/24/14 18:47:17.268 digest-service[72]: digest-request: uid=0
4/24/14 18:47:17.268 digest-service[72]: digest-request: init request
4/24/14 18:47:17.275 digest-service[72]: digest-request: init return domain: MBP-DE-LUIS-4 server: MBP-DE-LUIS-4 indomain was: <NULL>
4/24/14 18:47:17.400 com.apple.NotesMigratorService[398]: Joined Aqua audit session
4/24/14 18:47:17.418 racoon[401]: accepted connection on vpn control socket.
4/24/14 18:47:17.835 com.apple.internetaccounts[336]: An instance 0x7fc03bfd4940 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7fc03bfd5680> (
<NSKeyValueObservance 0x7fc03bfd57f0: Observer: 0x7fc03bfc98d0, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x7fff8e1bd43b, Property: 0x7fc03bfd5650>
4/24/14 18:47:17.844 com.apple.internetaccounts[336]: An instance 0x7fc03bd87e60 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7fc03bd87f80> (
<NSKeyValueObservance 0x7fc03bd87f10: Observer: 0x7fc03bd88c30, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x7fff8e1bd43b, Property: 0x7fc03bfd5650>
4/24/14 18:47:18.226 digest-service[72]: digest-request: uid=0
4/24/14 18:47:18.227 digest-service[72]: digest-request: init request
4/24/14 18:47:18.229 com.apple.internetaccounts[336]: An instance 0x7fc03e00f500 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7fc03e00e210> (
<NSKeyValueObservance 0x7fc03e000190: Observer: 0x7fc03e003a50, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x7fff8e1bd43b, Property: 0x7fc03bfd5650>
4/24/14 18:47:18.234 digest-service[72]: digest-request: init return domain: MBP-DE-LUIS-4 server: MBP-DE-LUIS-4 indomain was: <NULL>
4/24/14 18:47:18.245 com.apple.time[265]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
4/24/14 18:47:18.570 REUpdater[372]: REUpdate : Did not download since you have the version equal or later than that on the server
4/24/14 18:47:20.234 com.apple.dock.extra[396]: iPhotoDockTilePlugin: Unable to get dock badge information: connection timeout: did not receive reply
4/24/14 18:47:21.886 AllMyMusicAgent[369]: SARAgent newAgent
4/24/14 18:47:22.544 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
4/24/14 18:47:23.589 sandboxd[384]: ([367]) assistantd(367) deny file-read-data /Library/Frameworks/TSLicense.framework/Versions/A/TSLicense
4/24/14 18:47:26.529 AddressBookManager[382]: Validate metadata timed out, cancelling
4/24/14 18:47:26.556 com.apple.imfoundation.IMRemoteURLConnectionAgent[391]: ERROR: __CFURLCache:CreateTablesAndIndexes version create - table cfurl_cache_schema_version already exists. ErrCode: 1.
4/24/14 18:47:26.557 com.apple.imfoundation.IMRemoteURLConnectionAgent[391]: __CFURLCache:RecreateEmptyPersistentStoreOnDiskAndOpen: create tables and index failed.
4/24/14 18:47:27.757 PhotoStreamAgent[357]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:28.757 PhotoStreamAgent[357]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:28.909 WindowServer[168]: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
4/24/14 18:47:29.758 PhotoStreamAgent[357]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:30.760 PhotoStreamAgent[357]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:31.761 PhotoStreamAgent[357]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:31.887 SafariDAVClient[381]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:32.762 PhotoStreamAgent[357]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:32.918 SafariDAVClient[381]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:33.975 SafariDAVClient[381]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:34.980 SafariDAVClient[381]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:36.041 SafariDAVClient[381]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:37.113 SafariDAVClient[381]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:38.169 SafariDAVClient[381]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
4/24/14 18:47:39.238 secd[342]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
4/24/14 18:47:39.238 secd[342]: securityd_xpc_dictionary_handler AddressBookSourc[380] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
4/24/14 18:47:39.946 AddressBookSourceSync[380]: [CardDAVPlugin-ERROR] -getPrincipalInfo:[_controller supportsRequestCompressionAtURL:https://luisfernandolins%[email protected]/1047286319/principal///luisfernandolins%[email protected]/1047286319/principal/] Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x7fa5eb81cb60 {NSUnderlyingError=0x7fa5e9651cb0 "The request timed out.", NSErrorFailingURLStringKey=https://luisfernandolins%[email protected]/1047286319/principal/[email protected]/1047286319/principal/, NSErrorFailingURLKey=https://luisfernandolins%[email protected]/1047286319/principal///luisfernandolins%[email protected]/1047286319/principal/, NSLocalizedDescription=The request timed out.}
4/24/14 18:47:40.011 AddressBookSourceSync[380]: [AOSAccounts] : [IsAccountKeyChainActive] : had error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Remote error : The operation couldn‚Äôt be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call))
4/24/14 18:47:40.013 secd[342]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
4/24/14 18:47:40.013 secd[342]: securityd_xpc_dictionary_handler AddressBookSourc[380] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
4/24/14 18:47:40.017 AddressBookSourceSync[380]: [AOSAccounts] : [IsAccountKeyChainActive] :If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. -
Inconsistent Parallel Loop Performance
My original question was can traditional DAQ devices run in parallel loops? I have some extensive data processing and additional automation that would be a lot easier to do in parallel with an acquisition loop rather than cram it all into the acquisition's while loop. As I was building an example VI, I discovered the answer seems to be "sometimes".
I am working on a calibration rig for hot wire anemometers. It requires pressure values to be read into a PCI-4351 (traditional DAQ) for the duration of the calibration and record wire voltages to a PCI-6110 (DAQmx device) only when the pressure values have settled (i.e. the stream velocity is constant). Inevitably, both devices will be polling data simultaneously at some point.
It seems that the 4351 would transfer its data to a parallel loop, but not when 6110 was running and vice versa - and sometimes the buttons to stop the loops wouldn't work. Will traditional DAQ and DAQmx devices not perform parallel tasks simultaneously?
The attached VI might clear up the parallel structures I'm talking about.
Andrew
Andrew
Attachments:
ParallelLoopsExample.vi 32 KBAltenbach,
You pointed me a good direction - I wasn't familiar with action engines until you mentioned them, but after some reading (namely Ben's AE nugget), you have me convinced (although not entirely sure on how to proceed) so here come the questions!
1. I tried to use Ben's running average example as a template - what should the cases inside my AE be? Right now they're "initialize", "acquire", and "close". However, I have to pass a value from initialize to acquire to close - so as is, the VI won't run.
2. Ben had his AE in a loop to add data to the array and in another loop to perform the running average calculation. Since you end up with two of the same thing in your BD, how is this better than creating a local variable?
3. Best practice? I'm pulling values from several channels - should I isolate each channel an put it into its own SR within the AE or keep the data together and have a single SR for the 2D array?
I don't expect anybody to have the 4351 drivers installed - so the what you're probably seeing as three "?" VIs in the "Initialize" panel are the VIs needed to initialize the device (sampling rate, number of scans, etc.), the single "?" in "Acquire" reads the data and the two in "Close" end the acquisition.
Brad,
Thanks for the tip - I'll keep that in mind when I'm implementing the 6110 acquisition into my code
Andrew
Attachments:
InputAE.vi 20 KB -
Error while executing a Package in Parallel.
Hi All,
We are trying to execute a package in parallel. Our execution stopped while when the package is running for the sixth time. The error for that execution is as follows :
ODI-1241: Oracle Data Integrator tool execution fails.
Caused By: oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 Could not get JDBC Connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:271)
at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:149)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java:266)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java:155)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3185)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:1414)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2785)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1818)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:559)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
.....Some more
Can anyone suggest your pointers on this.?
Regards.It looks like you have exceeded the number of connections available for the datasource. Try checking your connection pool settings.
Maybe you are looking for
-
Trouble installing 12.1.1 version of itunes
I am having a problem when attempting to updating my windows 7 pc with the latest version of iTunes (12.1.1). When I select download from apple website, I get the screen that says "Thank you for downloading iTunes..etc...rather quickly, as though not
-
Spry Tabbed Panels: Issue in Safar 4
I am having an issue with Spry Tabbed Panels that only seems to happen in Safari 4. I am using Spry Tabbed Panels 1.4 through Dreamweaver CS3. The tab panel still works great. Now, though, when you select a tab, it put a blue link border around the t
-
My DSL is still down in June 29, technical support said there is still outage in Vienna area
Hi, My Internet DSL is still down since the June 29 storm. It has been more than 11 days. I spent hours waiting for technical support from India, remote modem so many times and they is still outage my Vienna area with no ETA. Is this correct? Aft
-
A number of my files (Word docs, iTunes files, etc.) are suddenly sporting new "last modified" and "last opened" dates that are far into the future (8/22/18, for example). This seems like it could be a system problem. Any ideas as to what's going on?
-
Problems with iPaq3630-mSync-ActiveSync3.5-Win2k
Hello, please I have a problem and I think you can help me.. I have an iPaq 3630 with Pocket PC 2000 and Oracle 9i Lite Client. In my PC Windows 2000, ActiveSync 3.5 ,Oracle 9i Lite and Oracle 8i Server. I have problems syncronizing.. mSync always re