Parallel processing not all work items are completed

Hi experts,
I have a strange problem with some Wi's wich does not get the status completed when the main WF is completed.
I have a WF with a fork , one branch is waiting for an event and the other branch is looping on a decision task and actions. when the event is received, the WF ends correctly and the main WF is completed. but the last active WI in the other branch is not completed and remain in the inbox of the agents.
I'm a bit confused,do you find this behaviour normal ?
SAP_APPL 500 : level 11
SAP_BASIS 640 : level 15
SAP_ABA 640 : level 15
regards,
Abdellatif

Hi Abdellatif,
normally the workitem should be put to logically deleted, so this is indeed strange behaviour.
The only thing I can think about is, that your workflowdefinition is a bit corrupt, if you check the workflow definition, no warnings occur?
Kind regards, Rob Dielemans

Similar Messages

DPM 2012 R2 catalog failing, not all database items are available for restore

I recently started protecting my SharePoint 2013 site using DPM 2012 R2. I was able to get item level recovery working, but not all of the database items are showing in the recovery section. I go get the warning "DPM failed to gather item
level catalog for 1 database(s) of the SharePoint Farm Some of the recovery points for these databases in the farm would be associated with an earlier successful catalog. (ID 3133)"
I have looked on the SharePoint front end web server in the WssCmdletsWrapperCurr log file and I do not see any exception there.
It it is strange because I do get the option to restore some items, just not all of them. Any help would be greatly appreciated.

Hi,
Resizing the boot partition (usually C:) should not effect DPM in any way. DPM writes directly to it's volumes contained in the storage pool and not through the mount points on the C: drive. So is the DPM UI showing
missing volume next to some data sources ? Try doing a DPM disk rescan and see if that removes the missing volume flag.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

HI
Sidhu
Tanks For Ur Replay
i am doing as for u r note..
AFTER DEBUGGING....
function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
WI_LIST_S
WI_LIST_E
WI_LIST_F
STATUSFILTER
TASK_FILTER
yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
CAN PLEASE HELP ME
HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
TANKS
RAFI SHAIK

Leave Request work items are not showing in SBWP TCODE under OUTBOX .

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

it wont be shown in outbox of SBWP
you need to check via SWIA or rptarqdbview or SWI5 for the user
these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
The outbox shows the last 30 days by default. This default cannot be
changed. This 30 days selection period is always set when you enter
the outbox. However, the user can change the selection period by
clicking the button 'Change selection period' on top of the grid
control but this as you know will be reset once you log out.
This is how the mapping from the
backend workplace folders to the UWL tabs should work:
UWL tab                        Backend folder
Notifications                  Deadline Messages
Tasks-> Completed Tasks        Outbox -> Workitems executed by me
Tracking -> My Requests        Outbox -> Started Workflows
Tracking -> Forwarded          Outbox -> Forwarded workitems
Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

Work items are not visible UWL task are visible in tracking in portal

HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

Work items are not dis appearing in my inbox for parked FI invoices.

Hi,
work items are not dis appearing in my inbox for parked FI invoices.
We are using asynchronus method, and terminating event for this method.
Could you please suggest, what will be the reason for this.
Thanks & Regards
Madhu

Hi Karri,
Thank you for your response.
But the event is triggering, No error message is getting.
Any other idea about the issue.
Thanks & Regards
Madhu

I had to wipe my ipod touch4 this weekend. Now when I sync it, not all the items that were backed up onto icloud are syncing over. How do I make that happen?

I had to wipe my ipod touch4 this weekend. Now when I sync it to restore everything, not all the items (music, videos, photos) that were backedup on icloud are syncing over. Help?

What happens when you try to redownload it by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Not all physical samples are valuated, force inspection completion?

Hi
I have entered results against inspection characteristics but on UD the system gives message "not all physical samples are valuated, do you want force inspection completion?
What is missing or how can I avoid this message?

In QE23, Select the inspection lot and check for the physical sample,
Once you enter both, you will get the screen similiar to QE51 to record result,
You will see a button for physical sample which u need to select and do the valuation.
hope this helps

IPad pixels are not all working so display is multicoloured any ideas

iPad pixels are not all working so display is multicoloured any ideas.

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Not all my songs are showing in itunes even though they are in the Itunes Media file directory

Not all my songs are showing in itunes even though they are in the itunes Media Dir. I have spent hours trying to find out why so I moved the songs out of the Music/itunes/itunes media and uninstalled itunes. I then restarted my pc and re-installed itunes. When I opened itunes the same songs are still there (but cannot be played as cannot find location) even though I have not put anything back in the itunes media dir. To me there seems to be a refreshing problem as itunes is not looking at the directory even through the advanced preferences area is mapped to the correct area.
Help please.
Thanks

Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
tt2

Build Failure Not Creating Work Items

I am configuring nightly builds for our new TFS system (we migrated from VSS; using TFS 2013 Update 4). I left the "Create work item on failure" set to True in the build configuration. However, it seems that no work items are being
created, or else I do not know how to find them.
In the build log I see the line
Create a bug for the build failure
and it is not followed by any errors. However, when I go into the Work area of the project (either through Visual Studio or a web browser) I do not see any work items. I tried creating a new query and removing all filters, but nothing returns
(we are not currently using Work Items for anything else).
How do I find the work items it supposedly created, or if it is not creating them how do I get TFS to create them?

Looks like this is failing with this message:
TF30040: The database is not correctly configured. Contact your Team Foundation Server administrator.
Specifically, it gets an access denied error when trying to call sp_send_dbmail. Based on the Event Viewer on the server, it appears as though it is trying to execute sp_send_dbmail as my user, which does not have permissions to the proc.
At the moment, there are several scenarios:
1. Build fails, work item should be auto-created
2. Work Item is manually created
3. An alert is configured
In scenario #1, the build fails, and no work item is created. Event Logs on the server show that this is because the build service account does not have permissions to execute sp_send_dbmail.
In scenario #2, I cannot create a work item because it is trying to send an email, though my user does not have permissions to execute sp_send_dbmail.
In scenario #3, an email is sent. I set up an alert to receive an email any time something is checked in. I received said email.
Is there a way to have this call made by some other user? Or to disable the alerts altogether?

All numeric items are summing up, also items which cannot be summed up

i use numeric items (e.g. analysis #) at cross table layout at datapoint place.
when i drill up from left axis, all numeric items are summing up, also the items which cannot be summed up - its not correct.
how can i avoid to summary up these number colums.
Desktop-Client 9.0.2.54.01
Discoverer Administrator-Client 9.0.2.54.01

This items already not defined as data points in the admin, however I used these on desktop client as data points.
But there is now an interesting detail: not always all detail lines are summarized on problematic items (e.g. only 2 of 7), but on all other data the detail and sum data are correct.
Now I checked the SQL-statement and found out, there are some results with more than one rows (different date in same row header on the left side) . The problem because i do not found it, is that, the different time is already a part of an selection parameter in the headline (year,month,day).
Possible solution: I give the date to the left side additionally.
Thanks to Russ and Marcos.
Best regards,
Walter

Error during Usage Decision - Not All Physical Samples are valuated

Hi,
I am using Sampling Procedure as follows:
Sampling Type : Fixed Sample
Valuation Mode : Attributive Inspection nonconf. Units
Inspection Points : Sample Management
I have assigned the Inspection Point as 200 and Sample Drawing Procdure in Inspection Plan Header.
I have recorded and closed results for 3 samples. During Usage decision the following message shows:
Not all physical samples are valuated! Do you want to force inspection completion?
This means that Valuation of Inspection points have not updated. I request your help to solve this problem.
Thanks & Regards
V.Devaraj

Hi
Check the inspection plan, check for all the operation, by double clicking on operation you enter the opertioa details screnn, pls scrol down, you should have a field called VALUATION, select the option "automatic valuation option" .
try this
navin

I preordered an album but not all the songs are showing up. They say purchased but wont go into my itunes library or onto my iphone. Please help.

They say purchased but wont go into my itunes library or onto my iphone. Please help.

Hey there aussieboss123,
It sounds like you are wanting to download an album that you pre ordered, not all the songs are downloading. First, use this section of the following article to see if the tracks download:
Download a pre-ordered item
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
If you enabled the option to automatically download prepurchased content in iTunes, then your pre-ordered content may already be in your library. If not, click the download link provided in your email notification, and your pre-ordered content will begin to download. You can also use the Check for Available Downloads feature in iTunes on your computer (choose Store > Check for Available Downloads) to begin downloading your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
If it does not, I would use the following article to report a problem with the purchase to the iTunes Store support directly:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Cheers,
Sterling

After mountain lion all calendar items are duplicated in outlook

After mountain lion all calendar items are duplicated in outlook. Any idea why this might be.

I'd keep them in folders - in your user account section, then just link to the folder with an alias and not keep the actual files and folders out on or in Desktop Finder area.
There is method to madness underneath, most things can be found from top level
Mac OS X Help
Isolating Issues in Mac OShttp://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/https://www.apple.com/support/quickassist/http://www.apple.com/support/mac101/help/http://www.apple.com/support/mac101/tour/
Get Help with your Producthttp://docs.info.apple.com/article.html?artnum=304725
TimeMachine 101https://support.apple.com/kb/HT1427
Mac OS X & Mountain Lion Communityhttps://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns

Parallel processing not all work items are completed

Similar Messages

Maybe you are looking for