Parallel use of Classic and New GL in ECC6.0

SAP Gurus,
We have just done an upgrade from 4.6C to ECC6.0. We currently have 3 company codes  live on the system and will be doing a rollout to a 4th entity. Is it possible to have the new GL with document splitting active for the new entity and use the classic GL for the other 3 company codes? Could we do the migration for these 3 company codes at a later date without affecting the new entity that is using the new GL functionality?
Cheers
Message was edited by:
        Sean Umagiliya

Well to answer some the questions:
1. The 4th entity is a legal entity
2. All the 4 entities are company codes and we do not use consolidation.
3. Ideally we would like to migrate the 3 companies on SAP to the new GL to coincide with the go live of the 4th entity but we may have resource and time constraints.
Most of the answers were very helpful but I still dont have a clear answer.
For example If I activate the new GL at client level and have document splitting only for the new entity and classic for the old entities, how will this affect any intercompany posting and also the month end processes? PCA accounting is very important for all the entities
Many thanks guys.. It's seems these issues are not easily addressed in any of the SAP documentation

Similar Messages

  • I purchased a used ipod classic and I want to reset it to factory ...how do I do this?

    I purchased a used ipod classic and I want to reset it to factory ...how do I do this?

    Click here and follow the instructions.
    (99485)

  • I purchased a used iPod Classic and can't get it to sync

    I purchased a used iPod Classic and can't get it to sync to iTunes.  If I click on Devices it asks if I want to transfer Purchases which I select Cancel - the SYNC option is grayed out.
    Please suggest fixes.

    Hello mkplumlee,
    I would recommend restoring the iPod to factory settings.
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    Cheers,
    Allen

  • Difference between classic and new gl

    what is the difference between the classic and new gl account?
    what is the difference between the golden and sand box?
    what is the segment of the gl account?
    what are the advantages of the new gl account?

    Dear Sunitha,
    these notes may help: 
    756146  SAP ERP new General Ledger: General information
    1070629 FAQs: New General Ledger Migration
    1039752 New G/L migration: Restrictions and important
    Cheers,
    Jon

  • TS3694 how do i restore my iphone3, got error 3014, seems that the update/restore only can be used from iphone3g and new'er

    how do i restore my iphone3, got error 3014, seems that the update/restore only can be used from iphone3g and new'er

    Go to to your Users/Home/Library/Application Support/iWeb folder in the Finder and then enter  Time Machine.  Go back to the last backup that has the domain file, select it and use the Restore button.
    OT

  • Classic and New G/L

    Hi,
    Need some inputs on the scenario below:
    Our client is implementing SAP and they have been acquired by another company which is already on SAP since long time but not on New G/L. The new company wants to bring the client onto their SAP instance where they are using classic G/L. But my client already went live with couple of their plants with New G/L. So we are not sure what the impact and how to bring them onto one instance when they are not on the same kind of G/L.
    Any input is appreciated.
    Thanks
    Raj/

    Hi Phani,
    Chart of accounts decision up to your business decision ,which they want to use either existing or else new. Follow mentioned SAP detailed notes ,can give explanation about our quires.
    Note 826357 - Profit Center Accounting and New General Ledger in SAP ERP
    Regards
    Mani Kumar

  • My name and/or password are not working on start up page. Got given used macbook pro and new to apple so please help!

    My brother gave me his macbook pro and I'm having trouble getting past the start up page that asks for my my name and password. I have an apple id and password but these don't work nor does me typing my actual name and the same password. I've rung apple twice and the first person said I had to reset my uusername account and told me I could do so by visiting the support part of the apple website using the link he gave me. The information tells me how to do this but I have to have the computer up and running to reset/change the account username and password. So no joy. Second time I spoke with a lady who told me the name and password should be the same as the one my brother used when he had the computer but having entered the name and password he gave me it still doesn't work. I've tried all the different name types of my name e.g. full name, no spaces, capitals and no capitals etc but every time I click on the right pointing arrow thing or press the enter button the password does a quiver/shake thing and nothing happens. My bro says he has a relatively new lion operating system. I haven't a clue what to do as I'm new to using apple computers and I've spent ages looking through the support section with no success in finding the solution. Any help/advise would be much appreciated. Ta

    Resetting User Password in Lion and Mountain Lion
    Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • 6220 Classic and New Battery Fun!

    Hi
    I have a 6220 Classic and purchased a new Nokia battery for it (as a spare) but when I insert it the phone after maybe 10 mins says "Insert Sim Card" but when I put the battery that came with the phone back in all is fine.
    Has anyone else had this problem

    Are you sure you have bought an original nokia battery and not one of the many fakes that circulate through places like ebay?
    If it is an original it is very odd and can't explain why it's doing it. I would certainly return it and try another.

  • How to identify the SQLs which are using the tables and new columns

    Hi
    I m using oracle 10G Database in windows. Developers have added some columns in some of the database tables and were asking to check whether there is some impact on performance or not. I have not done this performance tuning before. Kindly help me how to proceed further.
    How to obtain the sqls which are touching the tables and the new columns? It would be really great if you can help me with this.
    Thanks

    You can try to use DBA_DEPENDENCIES to get PL/SQL objects using tables: http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_1041.htm#i1576452.
    However if SQL code is not stored in database in a trigger, a procedure, a function, a package or a view, it is impossible to retrieve all SQL code referencing some table from database dictionary: for this you would have to analyze application source code.

  • Parallel use of fcpx and fcp7 in late macbook pro 2011

    I am happily running fcpx under Lion, however, have a lot of old projects on fcp7.
    I was unable to install fcp7 under lion to the late 2011 macbook pro 17, and this might anyways be a bad idea, as it eats a lot of terabytes on boot volume.
    Just want to share my workaraund, as it took quite an effort to figure out:
    1) MAKE A BOOTABLE CLONE OF LION BOOT DRIVE ON EXTERNAL FIREWIRE DISK USING SUPERDUPER OR CARBON COPY CLONER.
    2) BOOT FROM THE EXTERNAL LION BOOT DRIVE AND PARTITION THE INTERNAL DRIVE ON LION BOOT AND SNOW LEOPARD BOOT
    3) CLONE THE LION BACK TO THE LION PARTITION
    4) BOOT FROM 10.64 SNOW LEOPARD INSTALLER DISK AND INSTALL SNOW LEOPARD 10.6.4 TO THE SNOW LEOPARD PARTITION OF INTERNAL DRIVE
    5) NOW BOOT FROM THE NEW INTERNAL SNOW LEOPARD DISK, AND RUN SNOW LEOPARD 10.6.8 UPDATER
    6) INSTALL QUICKTIME 7.6.6 (THE LINK IS SOMEWHERE ON THE APPLE PAGES) IT SPECIFICLY NEEDS TO BE 7.6.6., NOTHING ELSE.
    7) INSTALL FCP7 FROM THE ORIGINAL INSTALL DISKS
    NOW YOU CAN BOOT FCPX OF LION PARTITION AND FCP7 OF THE SNOW LEOPARD PARTITION, DEPENDING WHAT YOU WANT TO WORK ON.
    NOTE THAT THE LEOPARD PARTITION ONLY NEEDS 24 GB OF USED SPACE, IF YOU DONT INSTALL MOTION AND AUDIO CONTENT PARTS OF FCP7.

    You dont need lion at all, but you might need an external boot disk for the preparation.
    Some resellers have reported cernel panic type problems if trying to install snow leopard directly on a macobook pro IF that macbook pro originally shipped with Lion. They say, there might be a chip preventing non Lion installs.
    So, I would just for safety, prepare everything on an external drive, then boot of that exptrenal drive a couple of times to be sure it works, and then clone it over to your internal boot drive.
    Anyways, if I put the Snow Leopard as startup drive in system preferencies, I would be able to work only on Snow Leopard environment. Personally, I like having both, as I like studying FCPX's possiblities in projects which permit it.

  • Parallel use remote control and touch panel.

    Hi.
    Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and was synchronized with touch panel. Can I use remote control when touch panel is enabled. Now remote control is locked.
    Thank's.    

    Hi
    No. When a codec is paired with a Touch controller it is not possible to use the remote control.
    You question number 677 in link bellow
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.pdf
    br Oleksandr

  • Classic BAdi and New BAdi ...

    Hi all,
    I have a question regarding the new BAdi concept using enhancement spots.
    With the classic BAdi's once we create an implementation it will call up our implementation when the BADI class is been called.
    But with the new concept we have to explicitly call the BAdi we created right ? doesn't this mean modifiying the standard code ( If there's no ehancement section or point )?
    Can someone tell me whether there is another way to call our implementation by using GET BADI and CALL BADI statement without modifying standard code ( by creating an explicit enhancement).
    Cheers,
    D.

    hi,
    Classic and new BAdIs differ in a number of features that are important for migration:
    1. BAdI object
    a. With classic BAdIs, a BAdI object is created by calling a factory method, and referenced via a reference variable of the type of the BAdI interface.
    b. With new BAdIs, a BAdI object is created via the ABAP statement GET BADIas a handle for the calls of BAdI methods, and referenced via a reference variable of the type of the BAdI. A BAdI object is an instance of an internal BAdI class, which otherwise is invisible to the outside.
    2. Passing comparison values for the filter
    a. With the classical BAdIs, the filter values are stored in a structure and passed with the call of the BAdI methods.
    b. With the new BAdIs, the comparison values for the filters used to search for implementations are passed when the BAdI object is created with the GET BADIstatement.
    There is no way of migrating the call of the factory method one-to-one into the ABAP statement, because GET BADI can also return an existing BAdI object, which is not possible with the factory method.
    3. Calling BAdI methods
    Passing comparison values for the filter
    a. A classic BAdI can be called only once and the call positions are registered centrally.
    b. With new BAdIs, multiple calls are possible and the call positions are not registered centrally.
    For the above reasons, an automatic call migration is not possible.
    Have a look at below link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ee/6f3b42ea85b26be10000000a155106/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/4d3e42fc94aa04e10000000a1550b0/content.htm
    I hope it helps.
    Best Regards,
    Reshma

  • Whats is the diff. btw classic badi and new badi

    Hi guy,
    I just found out that there is classic and new badi implementation in SE19, I would like to check out with u guys on what is the diff btw the two?
    thanks.

    <b>Differences Between Classic and New BAdIs</b>
    Classic and new BAdIs differ in a number of features that are important for migration:
    1. BAdI object
    a.      With classic BAdIs, a BAdI object is created by calling a factory method, and referenced via a reference variable of the type of the BAdI interface.
    b.      With new BAdIs, a BAdI object is created via the ABAP statement GET BADIas a handle for the calls of BAdI methods, and referenced via a reference variable of the type of the BAdI. A BAdI object is an instance of an internal BAdI class, which otherwise is invisible to the outside.
    2. Passing comparison values for the filter
    a.      With the classical BAdIs, the filter values are stored in a structure and passed with the call of the BAdI methods.
    b.      With the new BAdIs, the comparison values for the filters used to search for implementations are passed when the BAdI object is created with the GET BADIstatement.
    There is no way of migrating the call of the factory method one-to-one into the ABAP statement, because GET BADI can also return an existing BAdI object, which is not possible with the factory method.
    3. Calling BAdI methods
    Passing comparison values for the filter
    a.      A classic BAdI can be called only once and the call positions are registered centrally.
    b.      With new BAdIs, multiple calls are possible and the call positions are not registered centrally.
    For the above reasons, an automatic call migration is not possible.
    Have a look at below link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ee/6f3b42ea85b26be10000000a155106/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/4d3e42fc94aa04e10000000a1550b0/content.htm
    I hope it helps.
    Best Regards,
    Vibha
    *Please mark all the helpful answers

  • Firefox Downloads (in classic or new download window) does not show progress or downloads

    I noticed that when I download anyhitng that the download window (classic and new) windows do not show progress anymore, do not show files downloaded, nor give me anything to right-click and go to that folder, in which it was saved. I had it fixed for 1 day, until it started to lose the files the next day.
    I only see the arrow turning green, with no result within the downloadswindow.
    I had done the following:
    1. In the Location bar, type about:config and press Enter.
    o The about:config "This might void your warranty!" warning page may appear. Click I'll be careful, I promise!, to continue to the about:config page.
    2. In the Search field, type browser.download.manager.scanWhenDone.
    3. Double-click on the browser.download.manager.scanWhenDone setting to change its value to false.
    You can set the Boolean pref browser.download.useToolkitUI to true on the about:config page to restore the classic Download Manager window.
    Yet this problem still continues.

    '''Try the Firefox SafeMode''' to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
    When in Safe Mode... <br />
    * The status of plug-ins is not affected.
    * Custom preferences are not affected.
    * All extensions are disabled.
    * The default theme is used, without a persona.
    * userChrome.css and userContent.css are ignored.
    * The default toolbar layout is used.
    * The JIT Javascript compiler is disabled.
    * Hardware acceleration is disabled.
    * You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    Or it might be caused by Hardware Acceleration.
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Used ipod classic won't download music?

    I bought a used ipod classic and whenever i try to download a song i bought on my touch to my classic it won't.

    How are you trying to put the song onto the Classic?
    You cannot transfer it directly from the Touch to the Classic
    You cannot download anything from the iTunes Store directly onto the Classic.
    You put songs onto the Classic via the iTunes programme on your computer.

Maybe you are looking for