Paralleling or making using of extra CPU's

Hi,
Is it possible to improve the performance of the queries by setting certain parameters at database level by making
use of maximum cpu available and by not changing exisiting queries.Our servers have basically 8cpus.
Regards
Vijay Salian

sybrand_b wrote:
cpu_count is determined by Oracle and can not be set.That's wrong. See the docs.

Similar Messages

Load LiDAR data into Spatial 11g making use of Point Cloud Type?

Dear all,
from an aerial LiDAR scan I have approximately 226 million points, spread over 9 files. I would like to load them into Oracle Spatial 11g, making use of the new point cloud data type. I have the book "Pro Oracle Spatial for Oracle Database 11g" here and Appendix E explains how you have these two tables that together manage your point cloud. I find the example given in the book rather simplified though as they have only x, y and z and a row id colum. In addition to this I also have r, g, b and i (intensity) values.
I was wondering if anyone could give me a hint on how to store all the information in one table and making use of the sdo_pc data type at the same time.
Also, the example has the points already in a table, but I'd like to load it all directly from my files into the point cloud table (I know how to use sqlldr, but how do I get it into this point cloud table structure). What's the cleverest way to go about this?
All ideas are greatly appreciated!!
Regards,
Bia.

Hi,-
Our LAS converter supports LAS 1.1 format.
LAS version 1.0 has fewer entries for the data than LAS version 1.1 so you might just ignore those extra fields that donot exist in LAS 1.0.
Therefore, i am expecting your data to be fine with our LAS to SDO_PC converter.
Thanks

Dock uses lots of CPU time

I find Dock uses ~140% CPU time sometimes, I can't see a cause for it to do so. It usually stops of its own accord after a random amount of time. Killing it doesn't help, launchd restarts it and it goes back to using lots of CPU.
I have parallels install and I have the version which has the fix (6.0.12106) and I have also tried the work around (no luck obviously).

Never mind, I figured it out by myself. On this particular machine I had a 3rd party plug-in installed (SRS iWow 1.1.8). Removing that brought the CPU usage down to 0.1%. Usually I don't install 3rd party add-ons. This would seem to be a good policy.
Steve

IMovie using 200-300% CPU when editing video. Why?

Hello everyone,
As the title says, I am experiencing iMovie using 200-300% of my Macbook Air's CPU. This occurs when I am editing the video, taking parts out and making sure everything look and sounds good.
Does anyone know of a way to stop iMovie from using this much CPU?
Any help will be appreciated,
Thank you.

having the same problem. tried deleting the preferences and now i can't even insert cutaways - all options disappeared from the pop-up menu, only leaving the option to replace or insert

Which CPU Cooler did you use for your CPU?

Hi guys, just wondering, what CPU Cooler did you use in your mega 865?
Did you use the Intel or the MSI CPU cooler?
Which do you think is better?
I used the MSI CPU Cooler, Which I think is better cause it has a copper base which can transfer heat faster. Also the heatsink must have been designed for the case too.

^
The Mega 865 came with an additional "extra page" on how to install the Intel CPU Heat Sink into the 865, so it could be that msi thought that intel's solution was better? The manual of course had how to install the msi heat sink, so rather than printing the manual again, they provided an extra information sheet.

Apple mobile device service uses too much cpu time

Apple mobile device service uses too much cpu time, from 88% to 99% of the CPU time.

The best way to fix this is to completely remove all aspects of iTunes then reinstall. Step by step directions are on this article. Good luck
http://support.apple.com/kb/HT1925?viewlocale=en_US

TS4009 storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?

storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?

Welcome to the Apple Community.
Purchasing additional iCloud storage will not give you additional storage on your device.

Why can't I use the extra -$20/5GB- storage that I purchased?!!

I bought the EXTRA $20/5GB of storage, BUT when I tried to update my iPad Mini, it says that I need 1+GB to be able to download the update?! The new extra storage does show up in the place where the total storage is shown. In fact, it says that I still have 8.2GB of storage space remaining... ?! Could anyone please help me?!?

You can use the extra storage space. It will allow you to have larger backups (meaning more pictures in your camera roll, etc).
The space required to install the update is needed on your iPad. Not iCloud. There is no way to add storage ON the iPad.
You can get around the issue by installing the update using a computer with iTunes installed on it. The space won't be needed on the iPad to download, extract, and install the software update.
You can also contact AppleCare to ask for a refund, as the extra storage you purchased did not achieve the result you were looking for.
AppleCare US phone number: (800)-694-7466
Contact Apple for support and service
http://support.apple.com/kb/HE57

Why can't I make Lightroom use all the CPU-Power (all cores) available for generating Previews?

Dear Lightroom Team,
I've been a Lightroom user since the very first Beta, and I am truly happy with the work you deliver. It changed my way of editing forever, and you guys keep improving it.
Yet there is that one question that bothers me, and that i'm looking for an answer for.
My Workflow has the generate Previews checkbox checked by standard. I usually import between 150 and 2000 photos at once, on occaions it can be up to 5000 photos. Generating Previews always takes a significant amount of time, and Lightroom is only using 25% of my CPU Power while doing so. (using a MacBook Pro 8,2)
I understand the concept, that only using 25% CPU enables me to use the computer while waiting for the Previews. But most of the time I just grab myself a cup of coffee, do the dishes or other stuff, while waiting for the Previews. Usually I rund out of things to do, because it takes ages to Process all the photos. So I would really love to make Lightroom use ALL the cpu power possible.
I'm sure you guys have spent a lot of thoughts while coding this and have a very good answer handy. Looking forward reading it!
all the best,
Wolfgang

Wolfgang Lienbacher wrote:
I was actually hoping to get an official reply from adobe ...
This is prmarily a user-to-user forum. The Adobe staff monitored site is here:
http://feedback.photoshop.com/photoshop_family
On my four-year old Windows 7 i7-860 system LR4.4.1 takes ~0.5 sec. per Canon 5D MKII 21Mp raw image to render 'Standard-Sized' previews with LR Catalog Settings 'Standard Preview Size' set to '2048' pixels. I consider that pretty fast!
I usually build 1:1 full-size previews on import, which takes ~5.0 sec. per image. Processor utilization varies between 15-50% for Standard-Sized previews and 15-65% for 1:1 previews. I consider this pretty slow, but it doesn't stop me from working on the images inside LR's Library and Develop modules.
I wait until 'Copy and import photos' has completed and can see Preview Building has started. LR doesn't slow-down much even with the 1:1 preview building going on in the background. Have you tried working in LR during the preview building (i.e. sorting, rating, keywording, and Develop adjustments)?

Error in parallel exp-imp using ftp method

Hi,
We are doing migration of ERP system running on redhat linux 6 and sybase 15.7 .
Trying to do parallel export import using ftp method.
Here when we start the export monitor, it gives the below error.
Required system resources are missing or not available:
Structure of subdirectories in local export directory '/export/TRS_Mock_Export/ABAP' and FTP export directory '/usr/sap/TRQ/DVEBMGS00/TRS_Mock_Export/ABAP' on '<ip>' server is different.
But the structure is entirely same.
Even we have moved the export directory which got created after sapinst was run (before starting migmon) to the target server.
Below is a content of export monitor file .
export_monitor_cmd.properties
ftpCopy
dbType=SYB
exportDirs=/export/TRS_Mock_Export/ABAP
installDir=/media/sapinst_logs/Mock_Exp_Imp/sapinst_instdir/BS2010/ERP605/LM/COPY/SYB/EXP/CENTRAL/AS-ABAP/EXP/log_17_Apr_2015_05_03_53
ddlFile=/export/TRS_Mock_Export/ABAP/DB/DDLSYB_LRG.TPL
r3loadExe=/usr/sap/TRS/DVEBMGS00/exe/R3load
tskFiles=yes
dataCodepage=4103
jobNum=8
monitorTimeout=30
loadArgs=-stop_on_error
ftpHost=ip
ftpUser=user
ftpPassword=pw
ftpExportDirs=/usr/sap/TRQ/DVEBMGS00/TRS_Mock_Export/ABAP
ftpExchangeDir=/media/sbx_exchange_dir
ftpJobNum=3
trace=all
Please suggest.
Regards,
Amit Jana.

Thanks for the steps Siddhesh.
ftp is working.
in the properties file for ftp user earlier gave a different user.
Now gave sidadm and this error is resolved.
Now facing a different issue.
In the properties file we gave 'server' in the beginning . This is only starting R3load processes but ftp transfer does not start.
Then gave 'ftp' below 'server' but got the below error.
Check below the file contents and error :
export_monitor_cmd.properties
server
ftp
dbType=SYB
exportDirs=/export/TRS_Mock_Export/ABAP
installDir=/media/sapinst_logs/Mock_Exp_Imp/sapinst_instdir/BS2010/ERP605/LM/COPY/SYB/EXP/CENTRAL/AS-ABAP/EXP/log_17_Apr_2015_05_03_53
ddlFile=/export/TRS_Mock_Export/ABAP/DB/DDLSYB_LRG.TPL
r3loadExe=/usr/sap/TRS/DVEBMGS00/exe/R3load
tskFiles=yes
dataCodepage=4103
jobNum=8
monitorTimeout=30
loadArgs=-stop_on_error
ftpHost=ip
ftpUser=user
ftpPassword=pw
ftpExportDirs=/usr/sap/TRQ/DVEBMGS00/TRS_Mock_Export/ABAP
ftpExchangeDir=/media/sbx_exchange_dir
ftpJobNum=3
trace=all
=======================================
TRACE: 2015-04-20 06:14:57 sun.net.ftp.impl.FtpClient readServerResponse
Server [/192.168.51.12:21] --> 230 Login successful.
ERROR: 2015-04-20 06:14:57 com.sap.inst.migmon.exp.ExportStandardTask run
Fatal exception during execution of the Export Monitor.
java.io.IOException: illegal filename for a PUT
        at sun.net.www.protocol.ftp.FtpURLConnection.getOutputStream(FtpURLConnection.java:528)
        at com.sap.inst.lib.ftp.FtpService.put(FtpService.java:160)
        at com.sap.inst.migmon.exp.ExportExchangeTask.removeExportStatistics(ExportExchangeTask.java:277)
        at com.sap.inst.migmon.exp.ExportStandardTask.doRun(ExportStandardTask.java:92)
        at com.sap.inst.migmon.MigrationTask.run(MigrationTask.java:431)
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
        at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:351)
        at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:178)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:178)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:791)
INFO: 2015-04-20 06:14:57
Export Monitor is stopped.

I just downloaded Autocad to my downloads file, how do I take it from there to my Parallels Desktop without using "Windows Explorer"?

I just downloaded Autocad to my downloads file, how do I take it from there to my Parallels Desktop without using "Windows Explorer"?

Did you download it from Adobe or a pop up? If it was a pop up do not open it. Make sure you only get it directly from Adobe here:
http://get.adobe.com/flashplayer/
There is some malware that poses as Flash, in pop ups.
Then do as macbig explained double click on the file,
After you open and install the .dmg reboot your computer to complete the installation

Color using only one CPU?

When rendering with Color it seams that it using only one CPU, according to "top".
Is it possible to make use of all CPUs?

Color's work is done on the GPU not the CPU, so unfortunately, the answer to your question is, no.

I cannot watch Flash vids because Firefox uses too much CPU.

Firefox has become untenable because it uses too much CPU and disrupts Flash videos.
I've tried disabling or changing the values of plugins. Installing older versions. Nothing helps. It just sucks. It makes me want to pull someone's lungs out.

Everyone has this problem, since Firefox rigged one of its Plug-ins (something to do with crash reports) about 06 months ago, to max out CPU, thereby sabotaging computer performance (including Flash videos).
Why or how they haven't fixed it before now strains belief. I have seen the same complaint everywhere. It is a major fuck-up. People want to abandon Firefox in droves, except that none of the other browsers have decent add-ons like pop-up blocker.
Sort it out, Firefox.

Logic 8 using only one CPU while bouncing

Whenever I bounce a project, Logic 8 uses only one CPU. It also spikes this CPU completely, with the CPU meter going into the red area, which is why I am rather keen on persuading Logic to distribute the load.
Any ideas?
(I've given the support document with tips on how to balance multi-core performance a good read, but it doesn't seem to say anything on this particular subject, and following the advice in the document does nothing to change my CPU load.)

Bouncing is a single core process. Just like rendering is in Final Cut Pro. This won't change until Leopard and Apple's ProApps get better at handling multiple cores.
It's redlining because the processor core is working as fast as it can. Computer processors don't just randomly run slower, they use their resources for the tasks at hand. If it only used 50% of a core, the bounce would take twice as long to process.

(Can't Be Solved) Flash uses too much CPU

Hello all,
In the process of setting up my first Arch system, I currently experiment with OpenBox, and have tried using Flash (flashplugin) under Chromium, both latest version from the repos.
I tried watching a 720P video on youtube (Big Buck Bunny), but it was a complete failure.
After some searching, I disabled hardware decoding using
/etc/adobe/mms.cfg
Next, I completely disabled the Laptop Mode Tools daemon to make sure no powersaving was in play (and rebooted of course).
I also set the CPU governor to "performance" (though using cpupower, the CPU does scale to maximum under "ondemand").
All of the above did not help - CPU usage still reach ~80% when playing the 720P video unmaximized (and no dropped frames), and I get lots of dropped frames when going full screen.
Is it really what I can expect from flashplugin under Arch or have I missed something (hopefully)?
My CPU is Core 2 Duo P8600 which is more than capable of handling such videos (for reference only, software decoding of the same video under Windows 7 hover around 30% CPU usage (also Chromium and Flash, different Chromium version)).
Thanks, Adam.
Last edited by adam777 (2012-06-04 12:55:54)

OK, back from Ubuntu.
Did a fresh Ubuntu 12.04 LTS installation, and just installed Chromium and Flash from the software center.
Chromium version is 18.0.1025.151 (Arch has 19.0.1084.52).
Flash version is 11.2 r202 (Arch has 11.2.202.235, which I suppose is the same).
Also tried built-in Firefox and using proprietary drivers (still pure software decoding and rendering).
Under all scenarios, behavior was the same as in Arch - ridiculously high CPU usage comparing to Windows.
I guess Flash under Linux really is THAT bad, perhaps this new "chrome-only" flash will behave better (and will most definitely kept up-to-date in the AUR or so).
(I've already tried the currently available pepper flash from the AUR, with no better results).
Can't see much more that can be done in regards to direct flash rendering, really annoying.
Might try some sort of flash-video-automatic-replacement-with-vlc-or-something-like-that.
Adam.
PS.
My 20 minutes with Ubuntu were enough - Arch is definitely the way to go, even for a pretty green Linux user such as myself (have some background, though).
Last edited by adam777 (2012-06-04 12:57:06)

Paralleling or making using of extra CPU's

Similar Messages

Maybe you are looking for