Parallels 7 and yosemite

Does Parallels 7 work on yosemite to allow me to run windows 8.1 on my macbook pro R (late 2013) running yosemite 10.10.1? I have tried Vmware but my windows software application did not run properly so I need to try Parallels. Parallels.com says it does not but I have seen posts saying that others are using the old parallels successfully.

No. You need Parallels 10.x.x.

Similar Messages

Why does iTunes make me log in every time I open it since upgrading to v.12.0.1.26 and Yosemite?

Since upgrading to itunes v. 12.0.1.26 and Yosemite (same day), iTunes has been making me log in every single time I open it.
Not only that, but it makes me log in several times, for iCloud, for iTunes match, for whatever else we do on iTunes. It gives me like five different reasons to log in, and I have to type my password in five times.
Can anyone tell me what is going on here and how to fix it? Thanks!

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to create one movie that includes these short movies that I can then either burn to a DVD or show in iMovie's Theater. How can I do it?

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to combine those short movies into one movie that I can loop and burn on a DVD or show in iMovie Theater. How can I do it? The movies are now shared to iTunes.

Another easy way to fix this.
What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
Otherwise, if it's too late, you can either do the above or this...
Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business.

I have a MacBook Air. With latest version of Pages and Yosemite my full-screen function no longer operates.

My full screen function no longer works in Pages after latest software updates for Pages and Yosemite.
Has anyone else experienced this phenomena? It flashes to full screen then immediately reverts to the normal display.

Yes it does.
Open your Pages document in Pages v5.5.1.
To enter full-screen:
Pages > View > Enter Full Screen (or control+command+F)
Hover over the green traffic light in your Title bar. It will show diagonal full-screen arrows. Click.
To exit full-screen:
Hover over the Document Title bar, then Pages > View > Enter Full Screen (or control+command+F)
Move your pointer over the Document Title bar, and press the green traffic light again

How can I install Creative Cloud Desktop on a MacBook Pro running Parallels Desktop and Windows 8.1?

Does anyone have any help for installing Creative Cloud on a MacBook Pro running Parallels Desktop and Windows 8.1? I downloaded the app, double-clicked it, said yes to allowing it to change my system, and received a notice of installation failure with Error code 1000. Any help much appreciated.

RogueResearcher please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to install the Creative Cloud Desktop application. If you continue to experience Error Code 1000 can you please post a screen shot of the error? Please see FAQ: How do I capture and post a screen shot or video? for information on how to post an image.

What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
I'd frankly get a good external enclosure and buy a bare drive. But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
Grant

"Error Disk too Slow" Macbook Pro 2011 - Maverick and Yosemite - The Great Grand Mystery Unfolds!!!

Hey everybody,
Logic Pro X user here, have a late 2011 Macbook Pro, upgraded to 16gb of ram, 2.8ghz intel core i7, running latest version of Mavericks and more recently on a separate partition I tried Yosemite with a clean install of only Logic Pro X.
I use Apogee Quartet as my audio interface, I have a OWC Mercury Elite Firewire 800 external drive that I record to, all LPX files are on my internal drive.
Before Mavericks I had 0 issues with this setup, no with just one sole drummer track, or one single audio or software track, I get the various disk too slow errors after a few seconds.
I have tried reinstalling LPX, I tried a clean partition with nothing but Logic Pro on it (both Mavericks and Yosemite).
I have reset my PRAM and used Apple Hardware diagnostics as well as memtest (i think it was called) and even reverted back to my old original RAM that came with the computer. All hardware tests passed, I have verified and repaired disks from disk utility as well as from the recovery partition.
I have worked with Apple a bit over the phone doing these things, I have also read just about every thread on this pervasive issue. And its ruining my experience as a user. I absolutely loved Logic on Mountain Lion, no issues whatsoever! I'm considering reverting back to it actually.
On a side note I also have a HDMI Tv connected through the thunderbolt display, and a self powered USB hub that I connect my wireless mouse, iPhone cable and WD MY passport drive (which I only use for Time Machine).
I'm basically at my wits end and open to anybodies suggestions, I even tried resting the SMC and several other things advised in these forums.
I'm Stil under Apple Care and wondering if going into them is my only hope left.
I find that garageband acts the same, but I have no other system issues! its so bizarre, performance on all other programs is totally fine, its only when I want to record that I get issues.
For the record I do have some 3rd party VTS (Arturia V collection, EZ drummer 2 and AMplitube) but when I did the clean partition they weren't there and I still had the disk to slow error, so I'm not convinced its because of those.
Also Since the partition I obviously have played with my storage but I still have 75 gas of space on the mavericks partition (out of 500gb ) and on Yosemite partition I have 125 gbs available and on my Firewire external drive I have about 150gb left on a 500gb drive, so I'm not convinced its a space issue either (especially since before Mavericks Mountain Lion seemed to work just fine.)
HELP! Please help...I'm so exhausted trying to fix this on my own, and admittedly I've run to the end of my own capacity and don't know where to go from here.
Thank you for any suggestions, sorry for the long post, and if I have left anything out please let me know, this is my first post.

And yes I did upgrade my apogee drivers to the recent ones they just released.

How can I make Final cut pro 7 and Yosemite work?

Hi dear Apple.
I have this huge problem with Final cut pro 7 and Yosemite.
I have tried to install it on a Mac book pro that has Yosemite but it doesn't work.
I have an I mac with finalcut pro 7 working on Lion but I need to upgrade it to Yosemite to be able to use CC Adobe.
I have a feature film worth 6,7 million SEK with Final cut pro 7 and I can't translate it to XML files to premiere cause it is in its last editing process. I get an error everytime I try. Also the last version of Fcp (X) ***** for a professional editor. So.. My only option is to finish this film in Fcp7.
How can I use Yosemite and still be able to keep Fcp7?
Please help me or do something about this issue soon. I bought fcp7 for 11000 SEK at the time that was quite expensive.

Hi Meg the dog! Thanx for answering!
I know it was left to die 4 years ago. I just think its ****** up.. I work with documentaries and it takes quite a while to finish. I have done one for 6 years now. If I had known that Fcp7 was left to die I would never had started to edit 6 years ago...
I did try this recommended on the forum by another user:
Go to the app location in finder, CTRL click on the app and choose [Show Package Contents]. A folder [Contents] appears, click on it and choose [MacOS]. You'll see a Unix executable. Double click, you'll start Terminal. At the same time fcp will launch. After fcp is launched, close terminal and confirm when asked. Now fcp is up and running. Close fcp and the next time, just open fcp the normal way. DONE!
But it doesn't work for me. I can't launch fcp7.
I have Fcp7 Installed on my I mac and I wonder if that will effect fcp7 if I upgrade to Yosemte?
I tryed to export XML to work on premiere and this is what happends:
Any recommendations? I am going crazy here..

What is causing, and how do you fix, a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1

What is causing and how do you fix a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1.
It stops then after several seconds (like 25 secs) then it starts again ... and then several seconds later it stops again!
I have the latest software so I don't know what to do?
    David V.

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
Any help would be appreciated as this is so frustrating!!

Update to 3.6.16 has fixed this problem.

HT2434 How do I get my custom linux software to display at 1280x1024 on my iMac under Parallels? and stay that way when I reboot?

How do I get my custom linux software to display at 1280x1024 on my iMac under Parallels? and stay that way when I reboot?

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

Difference Between Phased Migration and Parallel-cutover and which is better considering Roll-back if something unexpected occurs

Difference Between Phased Migration and Parallel-cutover and whcih is better considering Roll-back if something unexpected occurs
Regards
Sumit

For what application and going from which version to which?
Chris

SMS messages not syncing in iOS 8 and Yosemite

I'm using iOS 8 and Yosemite. I was able to receive calls and sms messages from my phone on my computer. That has all of a sudden stopped. SMS contacts are now listed in red in Messages and are not delivered. iCloud accounts are the same on both devices. Any ideas?

Hey srobs,
Thanks for the question, I can definitely understand how frustrating it may be when messaging does not work on your iPhone. The following resource provides some great troubleshooting steps that you can attempt:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
To resolve issues with sending and receiving iMessages, follow these steps
1. Check iMessage system status for current service issues.
2. Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
3. Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
4. iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
5. Restart your device.
6. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Make sure that the contact you're trying to send a message to is registered with iMessage.
3. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
4. If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
5. Back up and restore your device as new.
Thanks,
Matt M.

Parallel ledgers and currencies in Fixed Assets

Hi all,
I have a difficult scenario in Fixed asset related to parallel ledgers and parallel currencies. This is the one.
We have
Area 01-1- Loc Cur-L1
Area 06-0- Grp Cur (takes values from 01)
Area 30-3-Loc Cur-L2
Area 31-0-Grp Cur (takes values from 30)
Area 33-6- L1 This area is derived from 30-01
The issue here is that when I post for example a retirement. First with ABAVN values from area 01 are posted to every ledger. If I check the posted document and I have the values of area 01 in local currency column and the values in area 06 and in group currency column. But, when I run ASKBN to post area 33 which is the difference between 30 and 01, the local currency value is correct (30-01) but the group currency amount is not correct. This value in group currency is not 31-06, is the local value multiplied by the Exch Rate at the retirement date.
How to do to have the group currency in a derived area as the difference of the group áreas which are related to the original one (31-06 in my case)?
I hope my question is clear!!
Thanks a lot, Iu2019m complete lost.
Adela.

Dear Adela.
1 - Define Currencied for Leading Ledger Like: Group/Index what ever you want.
SPRO >> Financial Accounting (New) >> Financial Accounting Global Settings (New) >>> Ledger >> Define Currencies of Leading Ledger
2 - Maintain Group Currency in Non Leading Ledgers
SPRO >> SPRO >> Financial Accounting (New) >> Financial Accounting Global Settings (New) >>> Ledger Define and Activate Non-Leading Ledgers
3 - Assign Non Leading Ledger to your Dep Area
SPRO >> Asset Accounting >> Asset Accounting (Lean Implementation) >> Organizational Structures >> Depreciation Areas >> Define How Depreciation Areas Post to General Ledger
Regards,
TML

Parallel currency and Parallel ledger activation

Dear all,
In one of our client places, they have done the parallel currency and parallel ledger activation in the middle that is after 1 month of go live. Because of this they are not able to clear the already posted documents. When they try to clear, all the documents are going to dump. Please suggest what has to be done.
Thanks & Regards,

Paralle ledger activation in the middle of the year is very dangerous for the previously posted open items.
At the time of clearing system try to post the entries in the parallel ledgers. But parallel ledger not available in the previous postings.
It will result adverse results in most of the transactions.Please check and take necessary action

Parallels 7 and yosemite

Similar Messages

Maybe you are looking for