Parallels Desktop 7

I recently installed Parallels Desktop 7, and the installation and everything went well.
Right now, I'm able to control the volume in my Mac partition.
However, when I'm using Windows via the program, I am able to control the volume but I still can't hear anything.
I checked Parallels Audio Controller, and everything seems fine too.
So do any of you know what's wrong? Why can't I hear anything?

>What Windows OS should I install for a perfect integration, XP, VISTA or 7?
Certainly not Vista. I am using Win7 at home (because I have the license) and XP at work because we haven't upgraded to Win7 yet. Parallels is happy with both
>Will I have to put in the activation key et register again?
You betcha!
>Will Microsoft permit the installation on another unit?
Microsoft's original activation policy was quite unpleasant and could be confrontational but has become much less so today. I've activated a couple times in one day (nothing illegal, just problems with a computer I was building for a friend) and never had to call Microsoft.
>Will I have to go through all the Windows update since the OS was lunched?
Sigh, yes.

Similar Messages

How to change 'always open with' file settings with parallels desktop 4?

Hi all.
here's my problem; parallels desktop 4 has hijacked file association on some of my file types and wont let me change them back to their mac equivilants
Accidentally clicking on one of these parallels associated apps causes the virtual machine to boot up, slowing my pc down dramatically and causing me grief.
Setting certain files to 'always open with' the equivilant mac app [eg. trying to get text documents to open with textedit as oppose to xp's notepad, hasn'thelped]
any suggestions ? - i am stumped
Thanks!

Delete Windows Applications folder in Virtual Machine folder (it's from Mac Side); disable Shared Applications from Configuration Editor.
---or---
...other permanent solution to try on Mac side
1 select a file in your finder (e.g. .doc)
2 press <cmd>
3 go to 'open with' option...
4 select the correct application (e.g. Microsoft Word)
5 click 'change all' - done...go try
When Microsoft Word is already selected, change that to another app, click 'change all', then set it back to Microsoft Word again and once more click 'change all'.
If still no joy, try strong language....

VMWare Fusion and Parallels Desktop Benchmark Comparison

This is a quickie benchmark of VMWare Fusion and Parallels Desktop using Super PI, PC Mark 05, and Passmark.
VMWare Fusion 36932
Parallels Desktop 3094 Beta 2
Notes:
Both virtual machines were allocated with large 10+ GB virtual disks and 640MB of RAM. The VMWare CPU was configured with two processors. The Parallels CPU was configured with 1 (two is not available). VMWare reported the CPU as 1 physical, 2 logical processors running at 2.66 GHz while Parallels reported 1 physical, 1 logical processor running at 9.6 GHz (the combined speed of all four cores on the Mac Pro). The max observed CPU utilization in activity monitor when running under VMWare was 200% and max under Parallels was 173%.
I chose not to compare 1 VMWare CPU vs. 1 Parallels CPU. While Parallels does not support SMP or multithreaded processes on multiple processors the CPU utilization on the Mac went well above 1 core (173%). For this comparison, I wanted to see results of max processing based on what the two vendors have delivered, as opposed to benchmarking the underlying "virtual or hypervisor cpu" on a 1:1 basis. This explains why VMWare was 2x faster than Parallels on some CPU tests.
Both of these products are beta. VMWare is running in debug mode (can not be turned off in this beta).
Caveat emptor on these stats. This was an unscientific exercise to satisfy my curiosity. Some of the extraordinary differences are highlighted with <--.
Platform:
Mac Pro 2.66 GHz, 2GB RAM, Nvidia 7300GT
Disk 1 - OS X, 73GB Raptor
Disk 2 - dedicated disk where each virtual machine image was created separate from the OS or any OS-related virtual memory files.
VMWare and Parallels guest OS: Windows XP Professional, SP 2
Comparison Benchmrk
VMWare Fusion 36932 and Parallels Desktop 3094 Beta 2
Super PI Parallels VMWare
512K 8s 9s
1M 20s 21s
4M 1m 57s 2m 03s
PC Mark 05 Parallels VMWare
CPU Test Suite N/A N/A
Memory Test Suite N/A N/A
Graphics Test Suite N/A N/A
HDD Test Suite N/A N/A
HDD - XP Startup 5.0 MB/s 19.54 MB/s <--
Physics and 3D Test failed Test failed
Transparent Windows Test failed 69.99 Windows/s
3D - Pixel Shader Test failed Test failed
Web Page Rendering 3.58 Pages/s 2.34 Pages/s
File Decrypt 71.73 MB/s 67.05 MB/s
Graphics Memory - 64 Lines 179.92 FPS 111.73 FPS
HDD - General Usage 4.82 MB/s 42.01 MB/s <--
Multithread Test 1 / Audio Comp N/A N/A
Multithread Test 1 / Video Encoding Test failed Test failed
Multithread Test 2 / Text Edit 152.85 Pages/s 138.48 Pages/s
Multithread Test 2 / Image DeComp 5.91 MPixels/s 35.4 MPixels/s <--
Multithread Test 3 / File Comp 3.22 MB/s 6.03 MB/s
Multithread Test 3 / File Encrypt 19.0 MB/s 33.26 MB/s <--
Multithread Test 3 / HDD - Virus Scan 27.91 MB/s 25.49 MB/s
Multithread Test 3 / Mem Lat - Rnd 16MB 5.34 MAcc/s 6.63 MAcc/s
File Comp N/A N/A
File DeComp N/A N/A
File Encrypt N/A N/A
File Decrypt N/A N/A
Image DeComp N/A N/A
Audio Comp N/A N/A
Multithread Test 1 / File Comp N/A N/A
Multithread Test 1 / File Encrypt N/A N/A
Multithread Test 2 / File DeComp N/A N/A
Multithread Test 2 / File Decrypt N/A N/A
Multithread Test 2 / Audio DeComp N/A N/A
Multithread Test 2 / Image DeComp N/A N/A
Memory Read - 16 MB N/A N/A
Memory Read - 8 MB N/A N/A
Memory Read - 192 kB N/A N/A
Memory Read - 4 kB N/A N/A
Memory Write - 16 MB N/A N/A
Memory Write - 8 MB N/A N/A
Memory Write - 192 kB N/A N/A
Memory Write - 4 kB N/A N/A
Memory Copy - 16 MB N/A N/A
Memory Copy - 8 MB N/A N/A
Memory Copy - 192 kB N/A N/A
Memory Copy - 4 kB N/A N/A
Memory Lat - Rnd 16 MB N/A N/A
Memory Lat - Rnd 8 MB N/A N/A
Memory Lat - Rnd 192 kB N/A N/A
Memory Lat - Rnd 4 kB N/A N/A
Transparent Windows N/A N/A
Graphics Memory - 64 Lines N/A N/A
Graphics Memory - 128 Lines N/A N/A
WMV Video Playback N/A N/A
3D - Fill Rate Multi Texturing N/A N/A
3D - Polygon Throughput Multiple Lights N/A N/A
3D - Pixel Shader N/A N/A
3D - Vertex Shader N/A N/A
HDD - XP Startup N/A N/A
HDD - Application Loading N/A N/A
HDD - General Usage N/A N/A
HDD - Virus Scan N/A N/A
HDD - File Write N/A N/A
Processor Intel Core 2 9653 MHz Processor Unknown 2661 MHz
Physical / Logical CPUs "1 Physical, 1 Logical" "1 Physical, 2 Logical"
MultiCore 1 Processor Core Multicore 2 Processor Cores
HyperThreading N/A N/A
Graphics Card Generic VGA Generic VGA
Graphics Driver Parallels Video Driver VMWare SVGA II
Co-operative adapters No No
DirectX Version 9.0c 9.0c
System Memory 640 MB 640MB
Motherboard Manufacturer N/A Intel Corporation
Motherboard Model N/A 440BX Desktop Reference Platform
Operating System Microsoft Windows XP Microsoft Windows XP
Passmark Parallels VMWare
CPU - Integer Math (MOPS) 112.35 230.31 <--
CPU - Floating Point Math (MOPS) 280.46 588.33 <--
CPU - Find Prime Numbers (OPS) 446.37 676.99 <--
CPU - SSE/3DNow! (MMPS) 2118.56 4737.13 <--
CPU - Comp (KB/s) 2994.16 5952.34 <--
CPU - Encrypt (MB/s) 18.09 36.27 <--
CPU - Image Rotation (IRPS) 598.21 1184.41 <--
CPU - String Sorting (TPS) 2118.81 3672.59 <--
Graphics 2D - Lines (TPS) 220.71 25.15 <--
Graphics 2D - Rectangles (TPS) 189.74 61.8 <--
Graphics 2D - Shapes (TPS) 39.54 13.71 <--
Graphics 2D - Fonts and Text (OPS) 190.39 75.88 <--
Graphics 2D - GUI (OPS) 439.77 63.72 <--
Memory - Allocate Small Block (MB/s) 2533.83 2526.21
Memory - Read Cached (MB/s) 1960.5 1906.27
Memory - Read Uncached (MB/s) 1871.79 1826.08
Memory - Write (MB/s) 1687.81 1545.43
Memory - Large RAM (OPS) 60.99 46.37
Disk - Sequential Read (MB/s) 102.11 76.45 <--
Disk - Sequential Write (MB/s) 58.33 50.9
Disk - Rnd Seek + RW (MB/s) 51.4 40.4
CPU Mark 711.08 1432.72 <--
2D Graphics Mark 743.31 176.5 <--
Memory Mark 599.94 580.38
Disk Mark 766.11 606.7
PassMark Rating 557.27 637.35<br>

Thanks for posting these numbers - it's an interesting comparison.
I would expect the final VMWare fusion performance numbers to be quite a bit better than that of Parallels - they have almost a decade's worth of experience more than the Parallels folks in this arena, and a much larger development team to boot.
Once VMWare Fusion is released to the public, I think that you'll see a clearer distinction between the two products. VMWare will continue to appeal to the professional customer, with a more robust feature set and corporate-friendly features (and a correspondingly higher price tag); Parallels will fall more into the consumer/VirtualPC-replacement market. It will be interesting to see how Parallels will be affected when (and if) VMWare player is ported to OS X.
Interesting about the Parallels performance stats on a native partition - looks like almost enough reason to avoid the bootcamp partition approach altogether. Sharing a native windows installation with a VM in parallels is a pretty scary situation in any case, as the two environments have entirely different hardware configurations. Do-able, but there is some black magic involved (if you want to see an example of what I mean, try to move a windows installation from one machine to another w/different hardware sometime - it ain't pretty); I wouldn't try this in a production scheme unless I had REALLY good backups.

How can I obtain a complete Time Machine backup (about 300 GB), with Windows 7-Parallels Desktop, without the system re-booting automatically?

I have been operating my MacBook Pro 15" (Mac OS 10.7.5), with Windows 7 - Parallels Desktop, for about one and one-half years. However, whenever I execute a Time Machine back-up, and leave the system to complete the process, I return only to find that my system has re-booted, long before the back-up is completed. I do not use the auto-backup feature because I do not see how to change the shedule for backups away from the default schedule of hourly backups (too my stain on performance). Is there something that I am missing in setting up for such a back-up? I am currently operating away from home, using wi-fi for Internet access.
Appreciatively, Arbyem

I have been operating my MacBook Pro 15" (Mac OS 10.7.5), with Windows 7 - Parallels Desktop, for about one and one-half years. However, whenever I execute a Time Machine back-up, and leave the system to complete the process, I return only to find that my system has re-booted, long before the back-up is completed. I do not use the auto-backup feature because I do not see how to change the shedule for backups away from the default schedule of hourly backups (too my stain on performance). Is there something that I am missing in setting up for such a back-up? I am currently operating away from home, using wi-fi for Internet access.
Appreciatively, Arbyem

Windows 8 won't install on my Macbook Pro, have installed Parallel Desktops 9.

Am trying to download Windows 8 onto my Macbook Pro. I've installed Parallel Desktops 9. The Windows download keeps telling me it can't download because the setup file is not supported by OS X. Parallel Desktops is telling me I can install Windows via a PC, DVD or image file. Does this mean I cannot install Windows by downloading it.

Am trying to download Windows 8 onto my Macbook Pro. I've installed Parallel Desktops 9. The Windows download keeps telling me it can't download because the setup file is not supported by OS X. Parallel Desktops is telling me I can install Windows via a PC, DVD or image file. Does this mean I cannot install Windows by downloading it.

Problem with Audio card in windows 7 in parallel desktop

Hi my friends
I was wondering if you help me
I have a macbook pro ( mid 2010 ) MC374
I installed windows 7 with Parallels Desktop but I haven't audio in windows 7
What do I do to repair that ?
thanks a lot

Try installing the Cirrus driver from the BootCamp 4.0.4326 download:
http://support.apple.com/kb/DL1636
BootCamp/Drivers/Cirrus
I read various things saying I should install the RealTek driver, but this didn't do me any good. Two seconds after running the CirrusAudio32.exe, my speakers came to life. Now Windows is dinging, chirping, and all that.
This is on a MacBook Air A1369.
-gjames

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

Windows 7 on Boot Camp stuck at black screen with blinking cursor... starts up fine in Parallels desktop

Hi,
Recently my dad's Windows 7 (Ultimate 64-bit) on his Mac Pro has stopped working. It gets stuck at a black screen with a blinking cursor. I've waited at least five minutes and it doesn't do anything, I have to power it off.
However it starts up perfectly fine and intact in Parallels desktop. If I insert the original installation DVD and boot from the Disc that says 'Windows' it will boot into the partition and work fine, unless I press a key to boot from the DVD.
I find both these things to be strange. The partition is backed up, which is fine, but I'd rather not have to re-install it if possible.
I have booted from the DVD and tried to repair the disk. It said it found a problem with something related to startup and that it needed to restart to repair it. I clicked yes, and then held alt/opt and (I think wrongly) booted back into the disc rather than the Windows partition. However it now says that it can't detect any problems.
In the repair my computer section when booting from the DVD, it detects the OS as Windows Vista Business. I followed these steps I found online:
Fixed! Peroblem was I think using OEM, which Bootcamp advise against using... they advise to use retail only. Fixed like this:
1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.*
Done. Rockin'
FixMbr was successful, as was FixBoot. However RebuildBcd reported that it found no Windows installations.
Does anyone know what could be wrong here? I should note that recently I removed the drive Windows 7 is installed on and put it back in. Also Windows Updates probably have been done by my dad. Not sure if they could be the problem.

Cult, welcome to the forum.
It sounds like you have a failing power supply unit (PSU). This will cause the symptoms that you describe. If the computer isn't getting enough power, it can cause numerous problems. You can try disconnecting any unnecessary components to see if it will boot. Here is a guide to help you troubleshoot the problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Using Apple Magic Mouse With Windows 7 64 bit and Parallels Desktop 8 questions

I will be getting an iMac in the coming months and installing Parallels Desktop 8 and Windows 7 64 bit.
I was wondering if I would have the functions of been able to left click, right click, scroll (preferably vertically but also occasionally horizontally) with the Apple Magic Mouse when I'm running Windows 7 through Parallels Desktop 8?
I just wondered if anyone has installed Parallels Desktop 8 and Windows 7 and have you been able to do what i mentioned above and also have you come across any other issues, problems whilst using the Apple Magic Mouse on the Windows side?
If there is any problems/issues with doing the above, is there anything I will need to do to get the above functionality to work?
Thanks in advance.

stz-42 wrote:
I'm using Parallels 8 Win 7 64 bit, on an iMac.
- leftclick and rightclick is working
- i miss the middle button in my cad-software
The same with the trackpad!
Sometimes scrolling is a bit too fast, becuase Win 7 isn't made to use with the Magicmouse or trackpad.
The only thing i miss / doesn't work ist the middle mouse button!
Thanks very much for the help stz-42 its much appreciated.
Providing I can left click, right click, scroll, then that's OK for me as I will be spending the vast amount of my time on the Mac side.
Are you able to scroll both horizontally and vertically when using Parallels 8 Win 7 64 bit on your iMac?

How do I install Microsoft Office 2013 on my Mac via my Windows 8 Parallels Desktop 8 partition?

I recently bought a copy of Windows 8, Microsoft Office 2013 and Parallels Desktop 8 for Mac.
I wanted to install a Windows partition on my Mac so that I could run MS Office 2013 on a virtual machine.
I set up the VM, and everything was looking fine and worked smoothly.
Then, when I inserted the MS Office 2013 disk into the CD drive, nothing happened!
I tried to install MS Office 2013 but to no avail.
Does anyone know how to overcome this issue?
Thanks.

In the Configure menu item, under Virtual Machine, configure the CD/DVD to be recognized by your SuperDrive:
The only drawback is that you have to quit Parallels for the drive to be recognized by the Mac again.
I just purchased the Office 365 subscription for both Office 2011 on my Mac and Office 2013 on my Windows 7 side - sure makes life simpler, and less expensive.
Clinton

How can I install Creative Cloud Desktop on a MacBook Pro running Parallels Desktop and Windows 8.1?

Does anyone have any help for installing Creative Cloud on a MacBook Pro running Parallels Desktop and Windows 8.1? I downloaded the app, double-clicked it, said yes to allowing it to change my system, and received a notice of installation failure with Error code 1000. Any help much appreciated.

RogueResearcher please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to install the Creative Cloud Desktop application. If you continue to experience Error Code 1000 can you please post a screen shot of the error? Please see FAQ: How do I capture and post a screen shot or video? for information on how to post an image.

Adobe Photoshop Elements 10 activation issue on MAC running Parallels Desktop for Windows 7

I have a MacBook Pro laptop running both OSX and Windows 7 (using Parallels Desktop). I installed the MAC version of Adobe Photoshop Elements 10 when I booted in the MAC OSX mode. I also Installed Adobe Photoshop 10 in the Windows 7 mode (running as a virtual machine using Parallels Desktop). Both programs indicate that they are activated. If I boot the computer in the Windows 7 mode (not using Parallels Desktop) and start the Adobe Photoshop Elements 10 program it indicates that it is NOT activated and that I "already have two copies activated".
Question: Since I only actually have two copies activated how do I get the program activated for the Windows 7 boot operating mode?
Thanks in advance.
waterdoc
[email protected]

I have a MacBook Pro laptop running both OSX and Windows 7 (using Parallels Desktop). I installed the MAC version of Adobe Photoshop Elements 10 when I booted in the MAC OSX mode. I also Installed Adobe Photoshop 10 in the Windows 7 mode (running as a virtual machine using Parallels Desktop). Both programs indicate that they are activated. If I boot the computer in the Windows 7 mode (not using Parallels Desktop) and start the Adobe Photoshop Elements 10 program it indicates that it is NOT activated and that I "already have two copies activated".
Question: Since I only actually have two copies activated how do I get the program activated for the Windows 7 boot operating mode?
Thanks in advance.
waterdoc
[email protected]

How to reinstall owned adobe acrobat 7? I have it on Parallels Desktop, but accidentally unstall on Mac :(

At first got some printing problems, I fixed them, but cannot print or find the pdf icon on printer drives. Stupidly, I accidentally uninstall the Adobe Acrobat 7 Professional thinking i can reinstall back just like the printer drives, but then find out the disk I own show 'Windows'. I have Parallels Desktop and this Acrobat 7 is working fine on Windows side, but I seldom open Windows, and I really really need pdf files on my Mac. I have spend days and hours trying to find out how to reinstall or map the application back on Mac. Please anyone can teach me how? I even contacted Adobe Acrobat, not quite friendly. Thanks a lot.

I only have the Windows version, i never have the Mac version, forgot how I can use it on Mac for the past years. I bought the Parallels years ago along with this Mac and limited to computer knowledge. I see 'Adobe Acrobat 8 Professional' on Mac application, thread ' 'X' Acrobat Uninstaller.app' What does it mean, can it be recovered?

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

I just downloaded Autocad to my downloads file, how do I take it from there to my Parallels Desktop without using "Windows Explorer"?

I just downloaded Autocad to my downloads file, how do I take it from there to my Parallels Desktop without using "Windows Explorer"?

Did you download it from Adobe or a pop up? If it was a pop up do not open it. Make sure you only get it directly from Adobe here:
http://get.adobe.com/flashplayer/
There is some malware that poses as Flash, in pop ups.
Then do as macbig explained double click on the file,
After you open and install the .dmg reboot your computer to complete the installation

Problem with parallels desktop.....

hi. im not sure if this has been said or answered before but i have installed the trial version of parallels desktop for mac. i don't really know how to use it and i just really wanted to see what it does. unfortunately....i dont need it. but, now i have tried uninstalling it by dragging it to the trash and it said i dont have sufficient permissions or something like that. i did disk utility to try to correct permissions or what not.
how can i uninstall this program?? it is a 15 day trial....do i wait the 15 days for it it expire then try to remove it or try reinstalling the program??
thanks for the help in advance! : )
-mark-

If you'd like to skip the manual, just open the disk image that you downloaded (.dmg) and then run the uninstall program. If you deleted the dmg file, just download it again.
You should reboot once you uninstall it to remove the network adapter.
Greg

Parallels Desktop 7

Similar Messages

Maybe you are looking for