Parallels Desktop 9 can't be opened after EFI upgrade 2.9

I just upgraded my EFI firmware for 2.9 edition. But after done this, the Parallels Desktop 9.0 can't be started with an warning of Unable to load the Parallels driver. It seems that the virtualization support is disabled on my Mac.But I have done with upgrade. And another odd thing is the upgrade notice is always on App Store software bar even if I have installed it for several times. Who can help me?

After you have the problem with PB, open the Console app and look for log entries associated with PB at the the time you tried and post the results here.

Similar Messages

Desktop can't see laptop after Leopard upgrade

Hi,
I have a G5 desktop, a MacBook Pro laptop and a PC on our work network. My laptop can connect to the G5, the G5 can connect to the PC, but the G5 can't even see the laptop since I upgraded the laptop to Leopard. Whassup with that? Anyone have ideas?
Thanks.

I have had the same exact problem. After waiting on hold for Apple Support for 45 mins I was instructed to do the following:
1. Restart the computer with the Leopard disk in and holding down the 'c'
2. Proceed thru the installation questions as normal
3. Choose custom install
4. Select 'Archive and Install, not Preserving...
According to tech support, this should work. The other solutions (changing the password at the root) or other things have not.
Apple Tech support made a mistake and told me to install the upgrade again (instead of going the custom route), so I will try these instructions in about 3 hours when this upgrade fails again and post my findings

Online Archive folder can't be opened after migration into Exchang2013

Online Archive folder can't be opened after migration from Exchaneg 2010 to Exchange 2013.
Windows8.1 MS office 2013, Exchange 2013, Online mode
error: Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance.
Is there any solution about this issue?

Select it and open the Info dialog. In the Sharing & Permissions section, you should have read & write access, and everyone (else) should have read access. If that's not the case, click the lock icon, authenticate, and make the necessary changes. Close the window and try again.

My MacBook Pro keeps saying The folder "Desktop" can't be opened because you don't have permission to see its contents.

My MacBook Pro keeps saying The folder “Desktop” can’t be opened because you don’t have permission to see its contents. I just took it in to the apple store a few weeks ago, and since then I can't go into my desktop, I cant download anything to my computer.

Choose Home from the Finder's Go menu, click on the Desktop item, choose Get Info from the File menu, and give yourself read and write access in the Sharing & Permissions section.
(92996)

I have MacBook with snowlepord with parallel desktop can I update to lion with parallel?

I have MacBook with snowlepord with parallel desktop can I update to lion with parallel?

Well, apparently you can using VMWare Fusion...
http://osxdaily.com/2011/03/07/install-run-mac-os-x-10-7-lion-in-a-virtual-machi ne-with-vmware/
And maybe with some hacks or updates to Parallels 6...
http://forums.macrumors.com/showthread.php?t=1104106&page=4
I haven't had time to try it myself.

Why can't I print after I upgrade to MAC OS 10.10 (Yosemite)?

Why can't I print after I upgrade to MAC OS 10.10 (Yosemite)?

You need a printer driver upgrade. Check with your printer's manufacturer to see if they have a new driver available. If not, then ask their tech support for additional help.
Meanwhile, open Print & Scan preferences, select the installed driver and click on the Delete [-] button. Then CTRL- or RIGHT-click in the list space and select Reset Print System from the context menu. Now, click on the Add [+] button to re-Add your printer. See it this helps. Be sure your printer is connected and turned on.

IMessages won't open after Mavericks upgrade

iMessages won't open after I upgraded to Mavericks. I keep getting prompted to "enter the keychain password," but I never created a keychain. I never used it before the upgrade, and I skipped the step during the upgrade because I did not want to use keychain and it was an option to skip it during set up.

HI,
The OS X Mac have been using Keychains for a long time.
In the Applications/Utilities folder open Keychain Access.
This should show you at least two keychains.
The Login one for your Mac User account and the System one.
Generally speaking the Keychain keeps the passwords used by various apps and it needs to be Open.
In most cases the Login password for the Mac Account user is also the password that opens the Keychian when the computer is started up.
As each Mac User Account owns it's own Keychain there can be issues when you drag an account from one computer to another rather than using Migration Assistant.
i.e. you might Own it on one computer but not on another.
In the Finder > Go Menu hold down the ALT key and select the Library that appears.
In the library navigate to Keychains.
Click to highlight the Login one.
Now use the CMD and i keys together (Get Info)
At the Bottom unlock the padlock
Highlight the name that has (me) next to it (it should be your Shortname).
Once you have highlighted this use the cogwheel item at the bottom.
This should be greyed out but saying "Make you (Me) the Owner."
You should also have Read and Write permissions like in the Pic.
8:48 pm Sunday; December 29, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. heeeeelp!

I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. what to do?

joycesalvador wrote:
... But I can't activate it after the upgrade. what to do?
See this discussion.
https://discussions.apple.com/message/21189708

Safari Crashes on Opening after Lion upgrade!

I just upgraded to Lion, and I try to open Safari, but it crashes before it loads my homepage!
I had recently set my default browser to Chrome in Snow Leopard the other day pre-upgrade, could that have something to do with it?

I'm using SL and found the perfect solution. 1) Follow oh_okay 's instructions, 2) download and reinstall Lastpass, 3) Restart Safari 5.1 and all should work fine. With this lastest update to Safari Lastpass functions a bit differently, having it's own tool bar with the option to hide. You have to click on the grey star, which stays grey, when logged in. There may be a tweek for that, which I haven't gotten to yet.
oh_okay
Level 1 (0 points)
Re: Safari Crashes on Opening after Lion upgrade!
Jul 20, 2011 10:31 PM (in response to Amgreen)
I've actually just found a solution.
As it turns out, LastPass was causing my crashes, too.
I had to find my SIMBL folder (~Library/Application Support/SIMBL/Plugins/LastPass.bundle) and remove the LastPass plugin.
After that, all was well. Not sure if I need to reinstall LastPass now or just pay for (what I've heard is the far superior) 1Password.

Email links won't open after ipad upgrade to 7.0.4, any help?

Web links in my emails won't open after ipad upgrade to ios 7.0.4, Any help with this issue would be appreciated.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

Finder.app Can't be Opened after upgrade

I just upgraded to Yosemite and my desktop will load for a few seconds before disappearing and Finder.app Can't Be Opened
2014 MacBook Air

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

IMovie will not open after ram upgrade. How can I fix this?

I updated the ram on my computer by myself from 2gb to 4gb. Everything seemed to work fine, yet when I go to open imovie, it will not open after endlessly bouncing on my dock. I have verified disk permissions. Repaired disk Permissions. Tried replacing iMovie with the iMovie backup from my time machine. Cleared the system cache. Tried reinstalling it using the ilife 11 disk. Tried installing the previous ilife 09 version. Reinstalled snow leopard and did a time machine back up. Placed the old ram back in the computer. All this things done with no success.
DOES SOMEBODY HAVE ANY IDEA ON WHAT I COULD DO?
regards
Lloyd

Hi
My first two thoughts
• Faulty RAM - There are programs that can test this as Tech-tools (buy or in Apple Care pac)
• Wrongly inserted RAM - Can be tricky and sometime not obvious - everything's looks OK but in certain situations it just randomly don't work.
Take out the new RAM and try Your Mac without it to see that it's still OK to start with and then very carefully re-install RAM and now be very careful to see that it snaps in exactly as it's intended to.
Yours Bengt W

Parallels Desktop 3.0 wont open.

have a brand new iMac (1 week old) when i first installed Parallels it would not open. I got
"parallels desktop quite unexpectedly"
I called mac and they had me reload leopard (took 1 hour) and i lost everything i had set up on the mac. but i reinstalled p 3.0 and it worked fine but now for no reason its dead again!!! shut it down last night all was fine and this morning i now get the same error message!
now that my computer has 8 days of stuff on it and all my old files i cant reload leopard AGAIN!! and lose everything i had set up. just for this to happen every week!
i use parallels for quickbooks (with custom stuff so i cant run QB for mac)
ANY HELP WILL DO...PLEASE
Brad

Since Parallels is not an Apple product, you may be better off posting your quesiton on Parallels own discussion forums as they would be geared more toward the issue than an Apple forum:
http://forums.parallels.com

App store can't be opened after upgrading to Mavericks

After I upgraded to Mavericks, the app store was still working but the next day, it can no longer be launched. Tried rebooting but it still does not work

I Reinstalled mavereicks and worked great for one day... now i am back to how it was... If only my time capsule worked.
Do we know if this a nown apple issue or is there some software conflicting with this?
I can´t reinstall every week...

Adobe PhotoShop CS6 can't be opened after installation

I have a problem, when the installation is complete, the program works well!
but a few days later, suddenly, the application can not be opened.
with notification: The application was Unable to Start Correctly (0xc0000022). Click OK to close the application
what is the problem and what's the solution?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Parallels Desktop 9 can't be opened after EFI upgrade 2.9

Similar Messages

Maybe you are looking for