Parallels (Win XP), Airport, and wireless printer

Hello, I am a very novice Parallels user with an issue. I need to be able to print using Word 2007 with Parallels on my macbook and mac pro. The problem is, I have my printer hooked up via USB to my airport extreme to print wirelessly, and I can't figure out how to get the whole setup to print wirelessly in Parallels. I'm clueless. Can you help? Thanks!

I was able to get my HP DeskJet printer running using Windows XP in Parallels, by doing the following:
Select 'Add a new printer' in Windows
Select 'Local Printer' in the dialog box (auto detect and install should be off), click next.
Choose 'Create a new port' and "Standard TCP/IP Port'. Click next.
For the printer IP address, enter the address of the base station ie. 10.0.1.1. The port name will be filled automatically. Click next.
For the device type, choose 'Hewlet Packard Jet Direct', then click Finish.
Choose your printer from the list and follow the rest of the prompts to install and configure the driver.

Similar Messages

Airport and Wireless Printing?

I have an older airport. The domed one that looks like a UFO. I'd like to be able to print wirelessly from my Dell and Mac laptops. Does anybody have instructions on how to do so? My printer is a Lexmark X2650. I have a Powerbook G4 and a Dell Latitude D620. Right now, my configuration is as follows: Ethernet cable comes into the Airport router. Ancient Dell desktop is physically connected to the router and the two laptops connect wirelessly. Any printing has to be done from the Dell desktop (the printer is connected to it). Any help would be greatly appreciated.

mikec42 wrote:
I have an older airport. The domed one that looks like a UFO. I'd like to be able to print wirelessly from my Dell and Mac laptops. Does anybody have instructions on how to do so? My printer is a Lexmark X2650.
If your AirPort unit has a USB port (not all domed models do), you may be able to print through it to your printer. Here is a Lexmark Web page that discusses that:
http://support.lexmark.com/index?page=content&id=RE110&actp=search&viewlocale=enUS&userlocale=EN_US&segment=SUPPORT&productCode=LEXMARKX2650&searchid=1268927310637

Apple airport express wireless printing not working on Windows

I have installed the Airport Utility v 5.5.3 and Bonjour Printer Wizard on my Windows XP (SP3) machine. I have successfully set up the router, but am unable to print wirelessly. In the utility, I see my printer and have selected the checkbox Share printers over WAN. I have the driver printers installed on a Windows laptop, but am unsuccessful printing from the laptop.
I read somewhere that I need to set the Internet > Connection Sharing to Off (Bridge Mode). I did that and then got the following error and then can't connect to the internet via the router at all:
An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. Error -6753.
I have tried setting up Bridge Mode several times and ensured my virus protection and firewall were disabled, but always the same results, so I reset my router and am back to using the Internet > Connection Sharing option of Share a public IP address.
The whole reason I bought this router is because it is supposed to be easy for wireless printing, but this has been far from easy to set up. So frustrating. Any suggestions?

Thank you for your quick response. Yes, I have Bonjour Print Services installed. I thought I had to select Share printers over WAN for some reason. Just now I deselected this setting, updated the utility and wireless printing still does not work .

Network Magic Pro 5.5 keeps dropping my router and wireless printer ...

...multiple times per day.
WIN 7 Pro 64-bit, SP1
Network Magic 5.5.9195.0-Pure0
Motorola Surfboard model SB6120 Cable modem
Windows Firewall configured by Norton Security Suite 6.2.1.5
Linksys WRT54G2 router ver.1
My problem is as stated in the header. My router needs to have the power cycled multiple times a day because it is dropping my internet access. This problem did not occur until I purchased in installed Network Magic. Also, the wireless printer needs to have the cycle powered almost as often. I've had both the router and wireless printer for more than 2 years and never experienced this problem before installing Network Magic
I manually changed my MTU setting to 1472 from Automatic. This has not helped.
Any other suggestions?
Thanks!

From what I know, the network magic software won't affect your internet connection since it is just a software to use to manage your network. You may want to isolate the problem first. You can try uninstalling the network magic software from your computers and try to observe your connection again.

I use MACBOOK , APPLE AIRPORT AND EPSON PRINTER. I AAM GETTING MESSAGE "PRINTER OFFLINE". PRINTER WORKS WELL AND INTERNET WORKS WELL. How can I get printer to respond

I use a macbook, apple airport and epson printer. After several printer jobs, I get a message "printer offline". I have tried restarting computer. restarting printer and still cannot connect, I can print directly with a USB cable. How can I connect to my printer via the airport?

Delete the printer in System Preferences and re-add it. You may also want to restart the Airport.

HT1677 Safari says I am not connected but wireless shows 3 bars and I can use wireless lap top and wireless printer. Happened after downloaded ios7

Cannot use safari even though I have 4 bars. It works fine on lap top and wireless printer. Happened after downloading IOS7

Go to Settings > General > Reset > Reset Network Settings
After that Reset let the iPad reconnect to your Wi-Fi.

Airport and Wireless network issues

I have read all the issues about airport and wireless network. I don't see the issues that I have. My issue is that my wireless network used to automatically connect as soon as I power up my powerbook; then one day I power up and I was connected to default and I did not see my wireless address listed. I when into airport setup to try and setup again and it would not let me saying my password was not right. I logged off and then on again this time my network address was listed, but it still would not connect automatically to the network, now everytime I go to the web I must pick my own network and put in a passwork that sometimes works and sometimes not.
I have not done any updates or put any new software on the powerbook, so this is not the reason for my problem.
Please Help!!!
Thank's
La Vern
G4 Power PC 15in Alum Mac OS X (10.3.9)

Had this issue with our imac after upgrading to 10.4
The answer was to go into Network and select airport tab.
Listed there (for me) were three settings. Delete all of them ,they will probably include the actual network you want! Click to apply. Re-start the Mac.
Go back to network and airport and you should now see only the network you wish to join. It will ask for passwords again!!
Click apply and restart. It worked for me.

Airport Extreme and Wireless Printing

Okay so i know that you can make wireless printing by simply connecting your printer to the airport extreme. However I have a wireless printer and i read somewhere that the extreme does not allow the wireless printer to be discovered when used with the extreme. I want to know if this is true. I currently use a linksys router and whenever i print something, the first time takes forever for it to detect the printer. I am hoping that a newer router will help but i want to know if the extreme does support wireless printers.

Same issue here. I recently upgraded to an Airport Extreme and can no longer print wirelessly. Before this router I used a different brand of wireless router and had no issues. When I go to the printer itself, an HP OfficeJet 7410, and look for networks on the little display it can see mine and the neighbors. However, when I tell it to join the network it gives me an error message along the lines of "Cannot join this network." New network password has been entered.

Airport extreme and wired and wireless printing

I have connected an Airport Extreme base station (AEBS) to my cable modem and my Canon S820 printer to the USB port on the AEBS. My wired connection (via ethernet port) is my tower G4 and the wireless is connected to my macbook. As I understand it, the printer can be accessed via the ethernet port (which feeds the G4 its internet connection) on the wired computer. The problem is; on the macbook, it recognizes the the printer and can print with no problem. On the G4 wired, it cannot find the printer. I have tried the trouble shooting suggestions of turning off the printer and airport and reconnecting power to re-establish a connection, but it does not recognize the printer on the wired computer. Am I missing something here? I have been completely unsuccessful trying to resolve this issue. Any help would be appreciated. Thanks!

Pathmaker wrote:
Try the solution presented by Talanton on the thread below. After spending hours trying dozens of combinations, this one worked for me.
http://discussions.apple.com/thread.jspa?threadID=1690334&tstart=0&messageID=803 6007#8036007
Thanks for the link, but the post did not resolve the issue. I am closer to a solution, but not able to print yet. Reloaded driver, restarted printer and airport and am able to get the correct path to the airport, but for some reason, I get a message that the printer has a communication error and to check that it is plugged in (yes), powered on (yes), and properly connected to computer (well, according to bonjour it is). So, the quest continues to resolve printing.

Notebook using Vista and wireless print server and HP5500 printer problem

Installed std vista local driver for hp5550 printer with usb cable direct to printer. Works ok
Then, disconnected usb copper line to HP labtop and connected it into print server in router (D-link router to HP5500 printer).
Installed wireless network driver in labtop (vista os)(no updated hp driver available for Vista on HP site).
Print jobs just stack up in the que.
Used 192.168.0.1 address (which works fine for my other old win 98 computer).
Driver using the "raw" setting not "LPT"
Print Sharing is enabled.
Any suggestions?
p.s. The wirless system works fine on an old windows 98SE computer using the original 5550 installation disk.

Went back and installed the "Windows 2000 Print Server Software (from D-link Router 824vpn). I assume that this included the USP Shareport program that was recommend in a thread. I can now access router wirelessly. However, wireless print jobs go into que for hp5550, que emptys, but printer does not start up. Copper usb from printer to computer works fine (as separate printer)sta. Using HPdeskjet 5550 (HPA ) printer, port 192.168.0.1, printer name/ip 192.168.0.1, protocal 9100, raw setting, port 9100, LPR and SNMP are both blank. Any suggestions (OS is Vista). No drivers from Dlink or HP for this application. Thanks

Multiple duplicate prints via apple airport and bonjour printer driver on HP Color Laserjet 1600

Please advise if this request will incur any costs as I have exhausted all self-help resources and articles in your knowledge base. Nothing applies to my issue. I used to be able to use this printer via USB or wireless network using apple airport base station and bonjour printer driver. When my company ugraded to Windows 7, USB seems to work ok and wireless under same setup works too, but each page prints out many duplicates >40 duplicates when in wireless state. I am also trying to print from my IPAD and this does not seem to work at all. If you tell me this printer will not perform, please just be honest and let me know. I don't mind buying another printer if needed but don't want to incur more high level cartridge costs (bought many due to duplicate issue) and could afford the new printer instead. Deciding between brother or hp depending on usable feedback here. Using Lenovo T410 for all that matters...Thank you, Marc

Unfortunately, without knowing the model of the printer I wont be able to let you know too much information on the issue or how to resolve it. Also, when you upgrade your OS you often have to update the programs you are using, I would recommend uninstalling the printer and using the software available on http://goo.gl/7R6HT.
Let me know Marc!

Airport Express Wireless Printing from Windows 8

I'm in the process of configuring a new laptop that came with Windows 8. I want to be able to print wirelessly to an HP PSC 1315 printer connected to an Airport Express, which I had been doing successflly from an XP Pro machine that just died. I am able to: (1) print wirelessly to the printer from a new MacBook Air (so wireless printing does work); (2) connect the Win8 machine to the internet via the Airport Express network (so the wireless network connection is OK); and (3) print from the Win8 machine to the printer when it's directly connected to a USB port (so the printer drivers are OK). I have installed Bonjour 2.0.2 on the Win8 machine, but it's not seeing any printers. I've also installed the Airport Utility (both 5.5.3.2 and 5.6.1.2) on the Win8 machine, but it's not finding any Airport wireless devices either.
I'd appreciate any help.
Steve
P.S. Incidentally, I can't install a viable Airport Utilty (AU) on the Air since the versions that will work with my older AEs (5.5.3 and 5.6.1.2) won't install on the Air. The Air will only install 6.1, which won't talk to my older AEs. Apple suggested I install 5.x on another Mac and then port it to the Air via a stick. But I don't have another Mac. Grrr.

Unfortunately, connecting your printer to the AirPort Express does not make it AirPrint compatible. You need to have a specific AirPrint compatible printer to be able to print directly to the printer using your iPad.
Check this Apple support document for more details on AirPrint.
http://support.apple.com/kb/HT4356
If you have a Mac, you might be able to use a workaround using an app like Printopia. There is a free trial, so you will know in a matter of minutes whether this will work for you or not. Just remember that your Mac must be running in order for this to work.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

Problem with Time Capsule and Wireless Printing (Mac+PC Mixed)

I have a time capsule that is the wireless router for the house and my iMac and laptops use the wireless network beautifully. I installed a Dell 1320C color laser printer by connecting it to the usb port on the time capsule. The airport express utility did NOT recognize any USB printer connected to the time capsule. I was however able to wireless print from my iMac by asking the printer utility to find all available printers which it did and then installing the printer drivers (thanks google). So, while i cannot find my printer as being connected to the time capsule through the airport utility, i can find it through the print utility as a connection through bonjour and i can print just fine to it.
Now i installed bonjour on my laptops and found and selected the 1320c just fine. When i try to print through the laptops (pc), nothing happens and the file stays in the print queue.
I am willing to live with the first quirk as I can print wirelessly from the iMac. I however need help to print from the laptops.
Any suggestions?
thank you so much in advance
Mukund

Mukund SRINIVASAN wrote:
Once I connect the printer via ethernet to the time capsule, how do I
1) see the printer on my iMAC - what utility do I run etc?
It is connected to your network. Check your printer setup manual on how to set it up. Or go the the Dell website for printer support if you can't find your manual.
2) can i then run bonjour from my windows laptops and see the printer through the network?
Via ethernet, it shouldn't need Bonjour to set up.

Spot On Networks and wireless printing with AE

I moved to a condo that supplies internet access through Spot On Network's built-in wireless connection.
I am used to having a DSL provide internet access which was connected to an Airport Extreme that also acted as a wireless router to my printer.
Now that I connect to Spot On for my internet connection, I no longer have the capability of using my airport extreme as a wireless router to my printer, since I cannot be connected to BOTH Spot On and the AE.
Or can I? Does anyone out there know of any way of using both a Spot On connection and an AE connection for my wireless printing?

I have the same problem. Uninstalled software, installed what I thought was the right software. No go. Reinstalled first software so I'm back to at least printing wired.

Benefits of Airport Express wireless printing VS. built in printer WiFi?

I currently use an Airport Express N to enable my old HP laser jet for wireless printing. The HP just stopped working and I need to buy a new one. I'm seeing built in WiFi in some printers today, so I'm wondering if there is a benefit to still using the Airport Express N for my wireless printing vs. the built in WiFi of the printer?
Thanks.

I do not currently use an iPhone, though I plan to. Any idea if you can wirelessly print from an iPhone with a printer with just built in WiFi vs. doing it from an Airport Express?
Thanks.

Parallels (Win XP), Airport, and wireless printer

Similar Messages

Maybe you are looking for