Parallels Win7 - Airport Utility cannot see Time Capsule

Running Win7 as virtual machine on Mac using Parallels 5.0. Mac can see fully functioning time capsule but when I switch to Win7 virtual machine, airport utility will briefly see time capsule and then it disappears completely. Same happens with using bonjour printer wizard when the HP Laserjet connected via USB to the time capusle will first appear and then disappear after 5-8 seconds. Searched help forums and have not found a solution, and welcome any help please. Internet access via time capsule on Win7 virtual machine not a problem at all.

Same issue, I found this http://forum.parallels.com/showthread.php?t=21064
Time Capsule is not a complete product.

Similar Messages

Airport Utility cannot find Time Capsule and has a blinking amber light

I have a wireless router for my Wifi set up through AT&T (2WIRE). I am trying to add my TC to my existing network rather than establishing a new Wifi network with it. When I try to plug in my TC to set it up, Airport Utility cannot even find it. My TC has a blinking amber light also. I have tried reseting my TC, resetting my router, unplugging my router, unplugging my TC... I have the latest version of Air Port utility (6.2 (620.33)).

Connect the TC LAN port to the computer by ethernet.
If necessary do a reset of the TC so it shows up.
Put the TC into bridge mode.
Go to the wireless page, and set wireless to off.
Update the TC.. disconnect from the PC and plug WAN port to LAN port of the 2wire with ethernet.
The TC will now exist as a client in your network without creating a second wireless network.
You should also be able to access the TC via the airport utility.
I do think you should use the TC wireless since the 2wire does not provide a signal at 5ghz which is much faster than 2.4ghz.
So I do suggest you in fact do use the wireless but it is up to you.
It makes no difference having two wireless networks if they both connect back to the same router.
Do not use the "Join a wireless network" method.. ie no cable between the TC and 2wire.. that is poorest possible setup.

Airport Utility cannot find time capsule after new network

I created a new wireless network from my wireless router and then my time capsule started blinking yellow and airport utility can no longer find it. What can I do to fix this?

patr18 wrote:
I created a new wireless network from my wireless router and then my time capsule started blinking yellow and airport utility can no longer find it. What can I do to fix this?
If you can connect temporarily to your Time Capsule with an Ethernet cable, AirPort Utility can probably see it and explain the problem.

Wifi works but Airport Utility cannot find Time Capsule Device

I just upgraded my home network to a MacBook Air, with Lion OS, plus a 2TB Time Capsule running the wireless.   I have my DSL modem connected directly to my Time Capsule.    I also have a USB printer attached to the time capsule.   When first configuring everything all systems were a go. Using the Airport utility in my Mac I was easily able to find and configure my Time Capsule.   I was also able to print wirelessly from my Mac to the USB printer.    All working as advertised.
However, after letting my computer go into sleep mode or sit for an extended period (more than an hour) the whole system blows up.    I am still able to access the interent through the wifi, however the Airport utility in my Mac no longer can see the Time Capsule, and my wireless printer says it is no longer connected.    The only way I have found to rectify the situation is to reboot the entire system (Mac, Time Capsule and Printer).   This is effective in returning the system back to normal, however this is not what I had in mind for my new Mac based wireless system.

I just upgraded my home network to a MacBook Air, with Lion OS, plus a 2TB Time Capsule running the wireless.   I have my DSL modem connected directly to my Time Capsule.    I also have a USB printer attached to the time capsule.   When first configuring everything all systems were a go. Using the Airport utility in my Mac I was easily able to find and configure my Time Capsule.   I was also able to print wirelessly from my Mac to the USB printer.    All working as advertised.
However, after letting my computer go into sleep mode or sit for an extended period (more than an hour) the whole system blows up.    I am still able to access the interent through the wifi, however the Airport utility in my Mac no longer can see the Time Capsule, and my wireless printer says it is no longer connected.    The only way I have found to rectify the situation is to reboot the entire system (Mac, Time Capsule and Printer).   This is effective in returning the system back to normal, however this is not what I had in mind for my new Mac based wireless system.

Airport utility cannot find time capsule

Hi
I had set up time capsule to work with airport facility ...it was working and then I tried to set it up for a printer ...now it it wont find timecapsule.... The airport facility will not let me in to try to make changes....
I am running on Lion and have done all the latest updates
Thanks

Do the setup in isolation..
Plug the TC directly into the Mac..
Turn off any airport connection so you only have the TC plugged in ethernet to LAN port <->
If the airport utility still cannot find the TC.. reset it to factory.
Then set the TC into bridge and do the wireless setup..
update the TC then plug it back into the router..
All setups should be done by ethernet all the time.

Airport utility cannot find time capsule unless I reboot each time I need to back up. Use snow leopard

Why do I have to reboot the time capsule every time that time machine calls for a back-up?

Constant amber LED is nothing to do with network.. it actually is showing the TC is actually got a bad power supply or the disk is dead.
Power it off.. and do a full factory reset.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Then you can see if it boots beyond the solid amber.. if not let it cool right down for several hours and try again.
What model exactly is it??

Windows Vista cannot see Time Capsule

I had a network setup via Time Capsule with iMac, Macbook Pro and PC running Vista Business. I have lost internet connectivity on the PC and Airport utility cannot see Time Capsule. The PC is connected to Time Capsule via etherenet. How can I fix this?
Message was edited by: doulos
Message was edited by: doulos

ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable. This means all of us using HOME editions are screwed.
Home Edition users would have to perform a Registry edit as follows:
1. Open registry editor (ref: Start > Search > Enter: regedit)
2. Browse to HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3. Create a new DWORD value with the following properties: NAME = LmCompatibilityLevel & VALUE = 1
4. Restart your PC and try the connection again...

Cannot see Time Capsule for backup but internet perfect A

I've seen other posts about time capsule problems and most talk about wireless dropout and loss of internet connectivity. My situation is almost the reverse:
Full airport strength in menu bar. Full access to internet sites on at least one computer. Cannot see Time Capsule via Airport Utility or in Finder on any computer. Time Machine backups fail (marked as Delayed in menu bar item).
If I reboot (via unplugging) the Time Capsule, it shows up again in Airport Utility and backups are successful. This has happened three times now. I think the first time was prior to upgrading the firmware. The second two times were after the Time Capsule firmware upgrade. In the second two instances, it looks like the backups run for about 12-13 hours, every hour. No problems. Then, they drop out. Yesterday, it ran from 8:30 AM until 9 PM.
I've got two Macs (a Powerbook G4 and a MacBook Pro), each running latest software updates (security, 10.5.2, etc.).
Unplugging (rebooting) my Time Capsule each day is not an option. That's partly why I moved from an ancient LinkSys router that always needed to be rebooted since we lost local and internet access. Any help is much appreciated!
Cheers,
Drew

Have you set up the TC with user accounts??
Most people just use the TC password..
I have done very little with user accounts on the TC.. it seems fundamentally wrong headed to me.. If you have a domain controller with everyone using accounts to login that is fine.. and the TC would then exist in connection to the domain controller.. but it is a home device and there is no function to all that.
What will happen if you change over to standard security or even turn on the guest account I am too scared to suggest as you may not easily get connection back again.. The TC certainly displays a warning going to accounts.. I am not sure of warnings going away from accounts.
If you didn't setup the TC, do you have admin access to it??
Perhaps I am assuming too much before you tell me everything. But I may suggest things you don't want to try.. unfortunately I cannot say this will work.. the issue is widespread across the Mountain Lion TC combo and I have yet to see Apple suggest a solution or even fess up there is a problem. Daily reboots are just simply now a part of the scene for all windows and Mac users.
Is the TC the main router for the network.. 1 hour is not default lease in the TC and very few people even know how to change it.. standard is 1day. I would consider 1hr adequately short for all arp tables to be kept up to date.. the computer should be seeking new lease at 30min.. ie half lease time.
If the TC is bridged an not controlling the network.. that can contribute to the issue.
Setting a static IP on the TC if it is bridged my help.

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

Airport Utility cannot see Airport Extreme Device even though connected to wireless network

I'm trying to set up a Macbook Air for my wife. I have a home network of four Airport Extremes that were configured in bridge mode with an authenticated SSID and one that is open for guests. On my PC my airport Utility sees all of the base stations and can configure them fine. On the Macbook air the utility cannot see any of the base stations no matter how many times I scan. The strange thing is that it can see both wireless networks. A fact that may be related to the problem is that the Macbook Air cannot authenticate into the secured SSID. The password is correct. Other machines (PC/Mac) all have no problem. Apple TV 2's, iPad's, and iPhone's all have no problem. I'm stumped.
Any help is appreciated! Thanks.

As usual in recent years, Apple creates and ships a problem (latest MacBook Air + Airport Extreme N + Airport Utility 6.1), and when multiple users encounter the problem, and post about it, nary an Apple supoort person to take ownership, so threads just die, like this one did. I'm having the same problem, and as a committed Apple customer, I just want to find any oither company to do business with.
(I'm sure connecting by wired Ethernet would work, but THE AIR DOESN'T HAVE AN ETHERNET JACK!!)
Love this community. Have had it with Apple.
Sincerely,
Marc

Help - G4 cannot see Time Capsule on Powerup

Hi,
I have one computer - an old G4, an iPhone and a PS3 connected to my Time Capsule (bought in May).
-G4 is connected by Ethernet
-PS3 and iPhone wirelessly
I usually put my G4 to sleep, and wake it, and everything's fine.
Twice now, the power has gone out, and when it comes back, the Time Capsule is green, and the PS3 and iPhone can see it. I boot the G4, and it cannot see it. The G4 also shows a date in 1969 (does that indicate other issues?).
I have tried the following both times -
Resetting the Time Capsule with the pin - does not work
Unplugging and resetting the time capsule with pin - does not work
Rebooting the computer and clearing out the PRAM - does not work
Changing the date to after 2001 on the clock, - no help
Of course, now that I've reset the time capsule, I can't configure it again and have lost the wireless connection.
Last time I eventually got it to work - but it seemed random as to how. I'm frustrated, and I would like any advice possible. I hope it's the computer and not the Time Capsule. Any thoughts? Thank you in advance.

Now I'm getting really annoyed.
Went to see the mac genius today at the Apple store. Saw it wirelessly no problem.
Saw it via Ethernet no problem. When I got him to check that there was a file on the hard drive he did it wirelessly though.
Told me Time Capsule was fine (and I believe him). Told me to take it home, create a second ethernet connection, and trash preferences for "System Configuration" if necessary. Did all that, booted, found the Time Capsule no problem.
Thought my problem was solved, but was it?
Turned off the computer, turned it on a few hours later - will not see Time Capsule, Airport will not recognize it AGAIN. Tried trashing preferences and rebooting - it doesn't work.
I'm able to connect the ethernet cable directly to the DSL modem and use PPPOE, it's fine.
I don't get it. What else can I do?

Cannot see time capsule on Airport Utility (Vista Home)

Hi I have a new Time Capsule. Have set up Airport Utility on Windows Vista Home Premium. But I cannot find the time capsule on the airport utility. I tried restarting, rescanning. Help!!!!!!!

Ok.. You don't need to use the airport utility then.. it is irrelevant if the windows computer can see it or not in the utility.
What is AC?
The new TC is AC wireless.
Open Windows Explorer.. type
\\TCIPaddress into the address bar. where you replace that that with the actual IP address.
eg \\10.0.1.1
It should show up.. If it fails, then turn off the vista firewall.. and open a command prompt and ping the TC by name and IP address.
Note names like Fred Blog's Airport Time Capsule.. are useless for windows.
You need SMB compatible names.. eg TCgen5
Wireless also should be TCwifi for example.
Short, no spaces and pure alphanumeric.
Once you do that does the TC disk show in the Vista computer??
It must respond to pings.. make sure windows hasn't changed the computer from home to work or public network.. windows can do that spontaneously because it was full moon.

Pc cannot see time capsule on network

I have a PC running windows 8.1 it connects to the internet just fine through the time capsule, but it does not recognize it in network places. Although the other PCs in my windows homegroup and my Mac do. I ran the networking trouble shooter in Windows and it does not detect a problem. Any suggestions of what I can do next?

Load the airport utility for windows .. 5.6.1 onto the computer.. it can be a bit difficult as it is now getting old. Apple are being lazy or deliberately recalcitrant about windows. Since this utility is not even up to configuring the newest airports.
But it has bonjour for windows and a disk agent that makes things easier.
Make sure the windows computer is set to home as network location.. not work.. not public.
Ping the TC in a command window. If it fails to respond turn off the firewall. Keep changing things. because it will never work whilst ping is unresponsive.
Once ping responds. See if you can access it by directly typing the name into address bar.
\\TCname or \\TCIPaddress
If your TC has one of those long Apple names.. which is not compliant with windows networking.. (albeit the other PC works it will not work 100%, use the IP address).

AirPort Utility allows changing Time Capsule disk password with a device password only

Hello!
I just noticed that changing disk password is allowed for anyone who has a Time Capsule device password. (AirPort Utility WIndows version)
I find that illogical.
Is it a kind of bug or it is intended to be this way?

Well, lets say that you had friends or other family members that use the Time Capsule for wireless connections.
And, you have files on the Time Capsule drive that you only want to share with one other person. If you use a disk password, only the person with the disk password will be able to see the files on the drive.
If you don't set up a disk password, then anyone who is using the Time Capsule wireless will be able to see the files on the drive.
So, if you want everyone to have access to the files on the drive, then use the device password.
If you do not want everyone to have access to the files on the drive, then use a disk password

Reset my airport extreme to factory settings, now getting flashing amber. Airport utility cannot see the unit when it scans. How do I access the unit?

Reset my airport extreme to factory settings, now getting flashing amber light. Airport utility scan does not see the device, so I cannot access any setup.
How do I make contact with the unit?

I found another thread from the June 3rd with the same issue. They seam to have a solution, but I am using windows. Does anyone know how to update older AXs on windows computers?

Parallels Win7 - Airport Utility cannot see Time Capsule

Similar Messages

Maybe you are looking for