Parallels with XP on a mac OSX server

Can I install and run Parallels with XP pro on a macPro running OS X server without issues? Is this a no-no, or is it being done?? Just wanted to ask before condidering the purchase. Any feedback?

There are services out on the internet that offer cross-platform checking of websites.
One that I know of is http://www.browsercam.com
Give them a try.
-Gregg

Similar Messages

Is a mac osx server fits to a office with 10 PCs

I want to set up a server for my company
The purpose of the server is to store files, share files & printer, a calendar, an internal website( for hosting a blog and filemaker files), regular backup
My office will have 10 PCs (window 7) connects to the server, and my company dont have an IT expertise ..
I have considered between Window SBS, Mac osx server and ubuntus server
I think a mac mini server is the best solution for me as:
1: easy installation
2: less expensive than SBS
however, is the mac mini server work well in my case?
Thank you very much!

An Apple Mac Mini server would be a good fit. It includes two 500GB drives and an unlimited-user copy of Mac OS X Server. Not bad for $999.
Mac OS X Server itself is very easy to configure and Apple has a lot of resources on their website to help guide you.
You will want to make sure to configure all of your file sharing share points with SMB for the Windows clients to access. You won't be able to take full advantage of Mac OS X Server's offerings, but for file sharing it will be fine.

How do I re-install my Mac OSX Server from scratch

Hi,
I have purchased two MacMini Servers with 10.6 OSX Server software pre-installed.
I have changed the organization as our company name changed and run into license issues.
I want to re-install the Mac OSX Server software and start from scratch. How do I go about this. I tried yesterday for many hours to do so and the new installs are still running into duplicate license issues and other issues. What is the best approach to do re-install? I am willing to erase the internal Hard Disk and boot (with an external DVD optical drive) if that is the best way to go. What are the steps?
I have the original CDs or DVDs and have extra, external hard disks to do a Time Machine backup, etc.
Thanks,
Don

If you are looking to do a nuke and pave of the system, and you have an external optical drive, then yes, that is likely the most direct method. Connect the optical drive, insert the installation DVD, and reboot the system targeting the optical disk as the boot volume (you can do this by holding down the C key or the Option key during startup).
Now, if you do not have an optical drive, you can put the installation disk into another Mac running 10.6 and use the Remote Install Mac OS X application in your Utilities folder.
Hope this helps

Bridge CS6 Mac cannot browse Mac OSX server 10.8

Hello:
We had a drobo file server which was mounted on the desktop and had no issues browseing the volume in bridge. After we moved to a new Mac OSX server running 10.8 we can no longer browse the mounted server. We get a primission violation. Using the finder we're able to browse files and folders and create new files without this same type of issue.
Is there a preference that allows connection to a network volume via Bridge?
I hope I was clear on the discritpion of the problem.
Thanks,
Rick

Try a reset of preferences for Bridge using option key while restarting Bridge and choose reset prefs.
There is also a plist file for Bridge in the user library preferences folder that can be manual deleted and will be refreshed after restarting Bridge.
And maybe run a check and repair permission with either Apple Disk utility or cocktail.
Unfortunately Bridge is not designed for use over a network nor official supported by Adobe when it comes networks.

Mac OSX Server error message in console

Hi,
I have the following error message having recently bought and configured (for the first time) a MacMini Server with Mac OSX Server 10.6.n.
1/26/11 1:38:11 PM org.dovecot.dovecotd[8582] Fatal: Invalid configuration in /private/etc/dovecot/dovecot.conf
Can someone help me understand how to fix this problem?
I can see the file in terminal, but don't know how to edit the file or change the file configuration to be correct.
Thanks,
Don

Don,
Welcome to the Discussions.
You may find a better audience for you question over in the server-specfic discussions.
http://discussions.apple.com/category.jspa?categoryID=96
Matt

What is xgrid admin in mac osx server?

Hello friends...
What is xgrid admin in mac osx server?

Xgrid is a grid or a compute cluster or distributed batch-processing engine. A grid allows an application programmer or system administrator to manage and coordinate a collection of computers and to distribute portions of a task across multiple computers.
Apple have [an Xgrid introduction|http://www.apple.com/server/macosx/technology/xgrid.html] available, and for details, have a look at the [Xgrid Administration and High Performance Computing|http://images.apple.com/server/macosx/docs/XgridAdmin_and_HPCv10.5.pdf] document that is available among the Mac OS X Server manuals.
Here is the [high-level overview of Mac OS X 10.5 Leopard Server technologies|http://www.apple.com/server/macosx/technology>, which can connect you with answers to many questions.

Installing Mac OSX Server hangs at Network Configuration

Hi there!
I am installing my new Mac OSX Server (SNow Leopard) straight forward the assistant.
Asking for Language: OK
Asking for Country: OK
Keyboard Layout: OK
Entering License: OK
Configuring Network:
Ethernet: Static
Airport: OFF
FireWire: OFF
Clicking on Forward to continue: The assistant keeps telling me "configuring network". Nothing happens. It is doing that for hours now.
I tried to connect with Server Admin tool: OK works.
The network is up and running, but the assistant is not continuing.
Any ideas?
Thanks for any help or suggestion

Smells vaguely of a DNS error or IP routing or a network connectivity problem.
What did you specify for your network settings, and particularly what was entered for the DNS server address? If you're not running DNS on your local network here, then enter no DNS servers as part of the prompting, and let Mac OS X Server establish its own default single-host DNS.
(You're not going to be able to use your ISP DNS here; those ISP DNS servers are not valid when you are establishing a server on a network behind a NAT gateway.)
I'd probably wipe the disk and boot from DVD and reload.

Mac OSX server not supported behind Airport Extreme NAT router?!!

For a customer, I recently installed a new XServe, within a local network with an Airport Extreme (n) with FW 7.4.2. Mac OSX Server manages the router (which has a fixed IP from the ISP). Because the Mac OSX Server runs a DNS server (supporting a local domain), OSX Server reconfigured the Airport Extreme, so that it would forward DNS queries to the server. The server's dns server will forward queries for non-local domains to the ISP's dns servers.
All clients get their IP configuration using DHCP from the router. You can't use the DHCP service of the server, as you can't disable DHCP on the router (in NAT mode).
All clients get the router's IP as the dns server.
HOWEVER:
The Airport Extreme can't connect to the internal DNS server! *It doesn't seem to be able to route dns requests to the internal network* (verified using nslookup). Any dns queries sent to the router will time out.
Come on, Airport Extreme team.. you can't claim the Airport Extreme to be the ideal router in combination with an OSX server, if this simple and very common setup is not supported! How hard can it be to either:
...*Allow us to disable DHCP on the router* (even when in NAT mode), so we can use the OSX server for this (which will dispatch the correct DNS settings)
...*Allow the router to route DNS queries to the local DNS* (OSX) server (which should be working anyway)
Message was edited by: blackbit

blackbit, Welcome to the discussion area!
It doesn't seem to be able to route dns requests to the internal network (verified using nslookup).
That is true.
This is a user to user discussion area so Apple will not see your suggestions here. Instead go to www.apple.com/feedback/airportextreme.html and send them to Apple.

Not installing Mac OSX Server 10.5.4

Hello Friends...
I purchased Mac OSX Server 10.5.4 Leopard DVD.
I would like to install and configure it.
According to the manual , its not working.
It is getting upgrade to my Mac mini 10.5.7.
After installing , it wants to restart. But, its not booting and getting always restarted.
So, any advices and suggestions from your side.
Regards,
Bhanu

I'm going to point you to these two places to see if you can resolve your issues:
http://discussions.apple.com/thread.jspa?threadID=2019706&tstart=300
http://support.apple.com/kb/HT3479
Basically what happens is if you insert the Server install DVD and start the installer package, if the DVD will boot your Mini it will show the 'Restart' button. If it can't, the installer will run and then you should follow the instructions in the second link.
Given the fact that many have tried and failed with the second method, I would attach the Mini, in target disk mode, to another Intel-based machine and run the install from there with the Mini as the target. Then boot the other machine from the Mini's disk and let the Setup Assistant finish -don't configure any services on the server in this mode other than setting it up as standard or advanced, apply any updates and then restart. Then shutdown both machines, detach the Mini, then let it boot on its own and continue configuration from there. I've done this several times with both PPC and Intel-based machines with positive results.

Mac osx server 10.6

Hi everyone , i just clone mac osx server 10.6 from mini to my macbook. its clone successful and boot fine . i did this for just practice . the problem is that when i disconnect eathenet cable from that the server preference not working , i m looking something like Loopback adapter in windows .. so i can open server preference in my macbook .... without plugin eathenet cable at my home ....

well if your trying to connect to the host, without an active network port you could try connecting with localhost or 107.0.0.1. You could also try deleting the ethernet interface and re-adding it. And or hard coding the ethernet interface to static ip.

Configure MacMiniServer 2,53 GHz MAC OSX Server 10.6 via Windows 7 PC

Hi,
i have a problem. I bought the MacMiniServer 2,53 GHz MAC OSX Server 10.6 and I want to configure the MacMiniServer via a Windows 7 PC. But the Mac Mini Mac OS x Server Install DVD can not open with a Windows 7 PC. Is there a possibility to start the install DVD from a windows 7 PC. I have at this time only a Windows PC.
Thanks for your help.

Hi
The MacMini Server having no optical drive has nothing to do with what you want to do. The server OS comes pre-installed.
All you have to do is follow Mr Hoffman's suggestions.
Any USB Keyboard and mouse will do. Your only problem as far as I can see is finding a suitable monitor and/or DVI adapter to connect it to. It may be worth your while purchasing a Mini Display Port to VGA adapter?
Tony

Can a NAS-raid5 be directly attched to a Macmini using Mac OSX server?

Please excuse this post if any of you feel this is the wrong area (it seems to be kind of foggy to where it does belong)....Just looking for a Solution....
I recently setup an Mac OSX server on my old Mac mini (for my home use) I was wondering if I could somehow setup my Buffalo Terastaion NAS to be controlled by (with perhaps the raid admin software). I don't mind id I have to re-format it. I notice in the raid controller software you can add a system....
Anyone done this before?
Thanks in advance,
RET

I was wondering if I could somehow setup my Buffalo Terastaion NAS to be
controlled by
That should be possible via the NAS's Web Frontend (which I think it has) like one does it under Windows.
The RAID Admin software is only meant for the Apple XServe RAID to administer.

Need help setting up Mac OSX Server for remote/off-site access

Hello, I want to be able to access our g5 tower running Mac OSX Server 10.5.8 remotely when not in the office. We have a static IP.
Are there easy step-by-step directions someone could provide or point me to? Thanks a bunch.

Hi
its really easy
You need to have Apple remote desktop
there are bunch of software s like chichen vnc and etc.
01. open your router from your web browser
02. go to nat settings
03. screch the option calld port forwading
04. enter the server ip address to that
05. save and restart the router
** What you did so far
if some one want to connect from your static ip address now it will forwerd to your server. *******
Go to system preferences (on server)
go to sharing
enable remote management
select opetions which you want
your done
2nd part Adding Computer to ARD
Select All Computer ----> click plus button and select add by address
put the Address : ip address
user name : server User name
password : server password
eureka
now you done

Cannot use this version of the application with this version of MAC OSX

When I try to download the new beta, I get a message that says: cannot use this version of the application with this version of MAC OSX
I'm new to Macs, but I installed all the software updates and that still didn't help. I dont have to buy a new operating system do I?

Muse requires Mac OS X 10.6 or later.
http://muse.adobe.com/tech-specs.html

I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8 Can't seem to download the upgraded software. Can anyone help?

Please review the System Requirements for the Time Capsule.
http://www.apple.com/airport-time-capsule/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

Parallels with XP on a mac OSX server

Similar Messages

Maybe you are looking for