Parallels xp unable to send problem report?

Parallels desktop 7
I have old version of XP, parallels does not detect (virtual machine is not available) when I locate, set up.exe is grey
I am unable to send problem report? please check network settings and try again, my network settings are working, I'm sendint this thread?? emails sending and recieving, any help would be really appreciated
Tks
Gary

You ain't gonna believe this but:
In 2006 I tried half heartedly to set up parallels and just took a look at a response I got, it suggested.
There's a bug in the Apple firmware in the Mac Pro that prevents the hardware virtualization support that's built into the processor from being used. Since you will be running a VM (Virtual Machine) to install your guest OS, hardware virtualization support will let your VM run directly on the processor hardware. Without Vt-X support, software emulation is required, which is many times slower.
Sometimes, putting your Mac to sleep and waking it up will allow getting around the Apple bug and allow Vt-X to work, speeding up your VM.
Well I just put mine to sleep and the bloody thing downloaded perfectly, go figure.
Shootist, you were perfectly correct, I was just frustrated and was trying anything.
Actually Tempelton, I put it here and parallels because I think it's a combo problem, but, thanks for your help anyway mate. Also, I do like a little Robert Johnson matter of fact the Blues Bros were real good at sweet home chicago too
Thanks all

Similar Messages

MacPro keeps crashing... Unable to send Problem Reports to Apple.

In the ever-continuing saga of getting my MacPro to work under Leopard, this keeps happening..
Everytime I have to Force-Quit something and it generates a report I get this message.
Safari crashes, System Profiler crashes, almost every application seems to crash. This NEVER happened with Tiger.
Can anyone provide any insight as to why this is happening and why I get this message. Hardware checks out ok. I think somehow it may be USB related because sometimes when I unplug the hub after a "hang" it clears up.
The problem reports are unable to "gather system configuration information" and never get sent to Apple.
Please let me know any usb diagnostics I can run? Here's what's connected to the USB HUB....
Brother MFC-7420
Media Card Reader by Belkin
Backups Battery
Eyetv 250
Canon i900d printer
Zephir blaster (for eyetv)

If you're running Mac OS X 10.5.8 as your profile says, there will almost certainly never be any more software updates, and there's no point in submitting bug reports because the bugs will never be fixed.

Firefox keeps crashing apon startup and unable to send crash report

Last night I was browsing the web and ended up having 300+ tabs opened, FIrefox started to slow tremendously and stopped responding a couple of times. Was given the option to close Firefox from the popup window and choose to close Firefox, unfortunately when I tried to open Firefox again it crashed and gave me the crash reporter and when I tried to submit the report the report it encountered a problem and is unable to send the report. I've run Firefox in safe mode and is working fine but when I try to restart with add-ons disabled its still crashes and unable to send report.

Try to start Firefox with the about:blank page by creating a copy of the current Firefox desktop shortcut and add a space and <b>-url "about:blank"</b> to the target field.
Try to delete the sessionstore.js file in the Firefox profile folder to prevent restoring the crashed session.
*C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
*http://kb.mozillazine.org/Profile_folder_-_Firefox
The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders

I am unable to send error reports to Apple or receive software updates

I am unable to send error reports to Apple or receive software updates. Does anyone know why this might be the case?

If you're running Mac OS X 10.5.8 as your profile says, there will almost certainly never be any more software updates, and there's no point in submitting bug reports because the bugs will never be fixed.

4.0b6pre on linux started crashing on https on 9/12 & unable to send crash reports?

Both on Sunday 9/12/2010 & today Monday 9/13/2010 using Lucid Puppy 5.1 on 2 different pcs the latest-trunk of Minefield 4.0b6pre for 686 linux
crashed horribly trying to load: https://www.chase.com/ . I am using
opendns via copying nameserver 208.67.222.222 & 208.67.220.220 to
/etc/resolv.conf .
I went back to 09/10 latest-trunk to post this. I have not added any extensions or addons. But after the crashes updated flash to the latest version.

4.0b7pre crashes trying to ask about default browser. Unable to send crash report.
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:4.0b7pre
BuildID: 20100914030208
CrashTime: 1284422847
EMCheckCompatibility: true
FramePoisonBase: 00000000f0dea000
FramePoisonSize: 4096
InstallTime: 1284422616
ProductName: Firefox
ReleaseChannel: nightly
SecondsSinceLastCrash: 179
StartupTime: 1284422837
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/projects/firefox/4.0b7pre/whatsnew/
Vendor: Mozilla
Version: 4.0b7pre
This report also contains technical information about the state of the application when it crashed.

I'm unable to send crash reports to Apple. Message says "Submission failed Please try again later" This has been happening for about 3 weeks.

I'm unable to send crash reports to Apple.
Message says "Submission failed Please try again later"
This has been happening for about 3 weeks.
How do I send crash reports?

If you're actually using Mac OS X v10.5.8, as your profile says, you're wasting your time trying to submit crash reports to Apple.

Won't send problem Report

I've been having a problem for about a month now when anything quits unexpectidly it builds the report for apple then when I click send to apple it says report not sent try again later. Any clues on how I might be able to fix this?

Hello Holly,
A common problem, & even if you could send it, Apple doesn't want it & will do nothing but trash the report.
I'd ignore the Send Report or disable the Reporter...
http://hints.macworld.com/article.php?story=20090902164105138
Forget the download in the middle of these steps...
http://www.ehow.com/how_6794343_disable-apple-problem-reporter.html
Then see if we can help with the problem here.

Can't send problem report

Hi all.
Had my first kernal panic today. (I've had OSX 10.4 for a little over a month now and I am not impressed. Lots of little bugs...) I was loading a web page with Firefox 1.5 and got the 'you must restart' message. Thought it was a spoof from the website at first but I couldn't force-quit Firefox or do anything else so I had to go along with it.
Now I have a problem report window up, the info on the panic in there and my explanation all filled out but it won't let me send it. The "send to Apple" button is shaded. I am connected to the internet... I've put some sort of explanation in the requested box. I don't know what I am supposed to do beyond what I've done, so why can't I send it?
I'll close the window and perhaps try to send it via Console log...
OK. It is there as "exited process.crashlog" How do I send it?
Thanks.
John L

Well, one reason it won't send, I have just discovered, is that I was offline just now. Within a few seconds of going back online the button became available. (I had quit my Yahoo IM and the OS told me it had unexpectedly quit. I filled out the form and told Apple it had not unexpectedly quit, I had quit it. We, Apple and I, are working on some of the other problems I'm having and have some good avenues to persue by the way.)
This doesn't explain previous times when I was online but what of that. I think it would also rule out my using Firefox instead of Safari. (I've had some other crash reports that have been sent just fine and haven't used Safari on this machine.)
Cheers,
John L

Cannot Send "Problem Report"

Alright guys, I got a 24" iMac, Processor 3.06 GHz Intel Core 2 Duo, Memory 2 GB 800 MHz DDR2 SDRAM
My main problem is that whenever I restart my iMac, two problem reports emerge, neither of which can be sent to Apple due to an additional message which reads "Submission Failed: Your report could not be submitted. Please try again." Anyway, the report reads as follows:
Process:         LoaderAgent [86]
Path:            /Library/Application Support/AVG/AgentTools/LoaderAgent.app/Contents/MacOS/LoaderAgent
Identifier:      LoaderAgent
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: launchd [81]
Interval Since Last Report:          2674975 sec
Crashes Since Last Report:           274627
Per-App Interval Since Last Report: 196870435 sec
Per-App Crashes Since Last Report:   274621
Date/Time:       2012-05-19 17:54:34.613 -0400
OS Version:      Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 2DE41748-5C86-4B0F-A8D9-26DED887ABFB
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /opt/avg/avg9/lib/libavgapi.dylib
Referenced from: /Library/PrivateFrameworks/AVGLnscServices.framework/Versions/A/AVGLnscServices
Reason: image not found
Now, normally I probably wouldn't have such a problem with this, however, some times when I put my iMac to sleep, I get a grey screen with a folder containing a question mark and a "non" sign over it. I have no idea what this means but I usually cannot turn my iMac back on for a half hour before it works again. If anyone has any idea what the problem is, please help. And understand that I am obviously under-qualified to know what the issue could be.

Apple no longer accepts problem reports for 10.5.8 since it is now unsupported.
You may have a dysfunctional system or system component. Try reinstalling Leopard:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Unable to send a report output

Hi All,
I am facing problem while trying to send a publisher report output to a user.
I have configured my scheduler and mail server thus able to run scheduler services.I have also given all necessary parameters like SMTP server etc through job manager but still find no way to send a output on mail.
The error that I recieved was .........
Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist
Error Code: 942
Call:UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 1 WHERE SEQ_NAME = 'SUBSCRIPTION_ID_SEQ'
Kindly let me know what should I do to resolve this.
Thanks in advance.
-Chandra

Hi,
Hope the code given below helps you.
FORM SEND_FAX
TABLES DOC2FAX STRUCTURE TEST_DOC
USING COUNTRY
NUMBER.
DATA: SID(5) TYPE N.
DATA BEGIN OF POPT.
INCLUDE STRUCTURE ITCPO.
DATA END OF POPT.
DATA BEGIN OF PRES.
INCLUDE STRUCTURE ITCPP.
DATA END OF PRES.
CLEAR POPT.
POPT-TDCOPIES = 1. " one copy
* POPT-TDDEST = " done internaly by script,
* POPT-TDPRINTER = " do not fill !!!
POPT-TDNEWID = 'X'. " do not reuse old spool request
POPT-TDDATASET = 'TEST'(022). " fill as you want
POPT-TDSUFFIX1 = 'FAX'(023). " fill as you want
POPT-TDSUFFIX2 = SY-UNAME. " fill as you want
POPT-TDIMMED = 'X'. " send now
POPT-TDLIFETIME = 8. " keep 8 days in spool
POPT-TDTELENUM = NUMBER. " number without country code
POPT-TDTELELAND = COUNTRY. " country of recipient
POPT-TDCOVER = 'test fax'(024).
POPT-TDCOVTITLE = 'test fax'(024).
* POPT-TDIEXIT = 'X'.
CALL FUNCTION 'PRINT_TEXT'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'TELEFAX' "<<< here we say: fax it !
DIALOG = 'X'
HEADER = HEADER
OPTIONS = POPT
IMPORTING
RESULT = PRES
TABLES
LINES = DOC2FAX
EXCEPTIONS
OTHERS = 01.
* do not bother with exception in sample code
* CANCELED = 01
* DEVICE = 02
* FORM = 03
* OPTIONS = 04
* UNCLOSED = 05
* UNKNOWN = 06
* FORMAT = 07
* TEXTFORMAT = 08
* EXTERNAL = 09.
IF SY-SUBRC = 0.
* arriving here means we could send:
SID = PRES-TDSPOOLID.
IF SID > '00000'.
MESSAGE S433 WITH SID.
ENDIF.
LEAVE .
ELSE.
* do not bother with exception in sample code
MESSAGE A400 WITH 'PRIN_TEXT'.
ENDIF.
ENDFORM. " SEND_FAX
Regards,
Siddarth

Unable to send crash/error problem report

Hi There,
I have recently noticed that when a program I am running either force quits on it's own or I have to manually force quit the program, I am unable to send crash/error problem report to Apple. This has happened for all my programs from Safari and iTunes to recently Microsoft Word. The crashing messed up my internet as I had to give up using Firefox (because it kept crashing and wouldn't send a report) so I downloaded Chrome.
Yesterday, Microsoft Word had to force quit because I manually quit the program but it never closed. It kept running in the background at 192% under my operating processes. When I force quit Word, it gave me the option to report the problem or ignore it. I chose to send a report but once that Problem Report screen loaded, it would not let me send to Apple, stating "Your submission could not be submitted. Please try again later."
I have tried numerous times since all to no avail. As I mentioned, this happens on a lot of programs lately and I don't know what to do to fix it. Below are the specs of my Macbook. I can copy the problem details, but is lengthy.
Any help/feedback is greatly appreciated.

Welcome to Apple Support Communities.
Apple is apparently no longer accepting crash reports for 'Leopard' OS X 10.5.8.
https://discussions.apple.com/message/17544781#17544781
Typical disk-maintenance activities when crashes occur include using Verify, and Repair Permissions on your hard drive (probably labeled Macintosh HD), using Disk Utility.
10% to 15% of hard-drive capacity is generally acknowledged as the minimum amount of free space needed for adequate performance.

HT204053 does the icloud service work in middle east(lebanon) area or just in USA?coz it isn't working on my mac;it logs in,but when clicking any category like calendar,mail or find my iPhone,it tells"service unable to load,send a report..."

does the icloud service work in middle east(lebanon) area or just in USA?coz it isn't working on my mac;it logs in,but when clicking any category like calendar,mail or find my iPhone,it tells"service unable to load,send a report..."..... so, the problem is..????

Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

Itunes wont open, encountered problem and send error report

Everytime i try to open windows, it says that itunes has encoutered a problem and needs to close. it has the send error report message too. please someone help

Meaghan, I already responded to your topic. Plus, it is simply not good to bury your post in other people's topics, and just for the future, if you have a problem without a good answer, don't post what has already been said in a thread. I know, the discussions take a little getting used to, but it is easy to get the hang of it after a couple of visits. You'll get it sooner or later. I know you will.

ITunes "Send Error Report" Message/Quicktime Problem

This is a problem that has only occured after I updated my iTunes to 7.0.2. Some songs in my library, and all of my videos that I have bought through the Music store cause the "Send Error Report" message to come up and iTunes closes down immediately.
I read another thread that a similar problem was occuring to a customer, and one of the admins requested him to un-install Quicktime and delete 2 files out of the registry. Then re-install quicktime through the "Repair" section of the iTunes installer. I followed these steps and the problem seemed to be fixed, but then they were "re-corrupted" I guess after I restarted my computer.
Do you have any idea what would be wrong? I know it is not spyware/viruses because I have several programs to check/delete them.
Thanks for your help
-jcavanagh.

Bump for the 3rd time.
Quicktime will not even open, on a sidenote. It starts to load, then I hear some sort of beep..then it closes. I have tried re-installing multiple times and the problem continues.

Unable to send emails, get error message that access to server is denied...problem began a few days ago

For the past few days, since the Thunderbird update, I have been unable to send any emails from my thunderbird account. I have also tried going into my juno account online, and any emails that I send out come back with the mailer demon response - tha the email did not go through. With help from Juno I have tried to reconfigure my account, turn off my Anti-Virus and Firewall (Norton 360) changed my password many times, but nothing is working.
This is the error message that I receive...An error occurred while sending mail. The mail server responded: Access denied...4664b9656464c9c921b121b9b9c5354d11b420a93520358d357984a56d99d1cd24a07174e57559e0b1f00c7149f025b925ed4d45140c20f5.... Please check the message and try again.
In the past, I have received this message and was told by Juno to change my password. When I did that, I was again able to send out emails. But this time nothing has worked. I even tried a system restore to go back before the Thunderbird update, but that did not help either. I really need to use my email, and just can't imagine what has happened to it. I am not sure if this is a problem for Thunderbird or for Juno my email server. Please advise. thanks.

To diagnose problems with Thunderbird, try the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.
Note that Norton's is notorious for not being "off" when their interface says they are. Safe mode with networking guarantees that.

Parallels xp unable to send problem report?

Similar Messages

Maybe you are looking for