PARAMETER_EXCEPTION: Start date is after end date

WORKLOAD ANALYSIS (PORTAL ACTIVITY REPORTING) : PARAMETER_EXCEPTION: Start date is after end date.
Hello,
We get the above exception when we analyzed the extractor framework logs for EP Workload analysis extractor.
Can someone please advice.
Thanks
Srikanth M

Hi Nacho,
Could you please check if the Solution Manager time format for the user used for the Workload analysis is same as that of the monitored system. This error was caused in our landscape as the format in the monitored system was having a dd.mm.yyyy and that of the user in solman was mm.dd.yyyy. You can check the same in the transaction SU01 --> Change/Display --> Defaults tab --> Date format.
Thanks,
Lijin Xavier

Similar Messages

Fixed start date and variable end date

I'm using Project 2010 Standard. Task A has already started. It can't end until 2 weeks after the completion of task B. The only way I can make Project schedule this task is by doing so manually, allowing Project to calculate the duration. But then if the
end date of task B changes, Project reschedules the entire task based on the duration without regard for the start date. If I add a % complete to task A, then the end date doesn't change if the end date of task B does. Project seems to fix the duration
once it's calculated. I need the duration to be flexible based on the fixed start date and the end date of task B. This project file is stored in SharePoint so I can't make task A a hammock task. I get the error "You cannot create links from a project
file that exists on a Web folder to another file" even though it's the same file. Any suggestions would be greatly appreciated.

WhoKnows,
I'm afraid without a hammock task the only way to do what you want is either with a manual reschedule or a macro to recalculate the duration of Task A when Task B moves.
Update: Okay, after playing around here is a little trick that might work.
1. Break Task A into two parts (e.g. -1 and -2)
2. Set the predecessor of Task A-2 to be finish-to-start with Task A-1 and finish-to-finish + 2w with Task B
Depending on the nature of Task A you may still need to do a little manual adjusting but it will effectively allow the start of Task A to be fixed and the finish to be variable depending on the status of Task B. Does that work for you?
John

61 062 & date comes after end of valid factory calendar. (Please correct)

Hi Experts,
I am Getting the Error in Creating Purchase Order:
Error Message No. 61 062 & date comes after end of valid factory calendar. (Please correct)
Please suggest.
Regards,
Ashok

I got a Solution For this. Actually User has Maintained Wrong Planned Delivery time in PIR for the Same it was Behaving like that.
Thanks

User not disabled after end date (9i)

Hi All,
The Disable after end date schedule task disabled 7 users but did not disable 1 user.
Any know issue around this.
Thanks
Don

Hi Gyanprakash,
i can not try disable manually, its in production. The log for disable user is commented in log.properties. Can not change that .
Just need to analyze, why this user was left out.
Regards
Don

Process Chain running even after end date

Hi,
We are scheduling month end PC to run every 2 hours and also we have given end date for today evening.but process chain runs even after end date for every 2 hours.so we have to manually remove it from scheduling.
Any method how can PC stop on its own after end date .
Any help highly APPRECIATED
Thanks
Nilesh Pathak

There might be multiple release jobs for thie process chain.
So check the same. Right click on process chain --> Display scheduled jobs --> Here all the jobs logs of the chain will be available.. So check the same here...
As you have descheduled it now.. probably you may not be having it as the first release job might be moved to Schedule status as soon as the END date has reached and then second one might have gone when you have removed the chain from Schduling..
Anyway check the same.. and also check in SM37 whether any other user has triggered it manually today or not?

Actual Start Date vs Actual End Date - Activity

In an Activity, I would like to seperately enter the Actual Start Date and Actual End Date.
- If I try this using (partial) confirmation, I receive a pop-up with an error that the two dates must be entered together or no dates can be entered.
The activity in my project can take over a year to complete and the requirement is to confirm start (at start) and to confirm end (at end).
Does anyone know of a solution for this issue?
Thanks in advance!

Hi Patrick,
I think you need to research a bit more on confirmations in PS. Actual dates in partial confirmations are practically interpreted as provisional actual start dates and actual finish dates. The actual start for the activity remains the same however the actual finish date is overwritten once the final confirmation is entered.
For example, take an activity with start date 05.09.2011 and finish date as 14.09.2011. Now when you provide confirmations on a daily basis, you can use the following strategy:
Day 1, 05.09.2011: actual start 05.09.2011, actual finish 05.09.2011, % complete 10%
Day 1, 06.09.2011: actual start 05.09.2011, actual finish 06.09.2011, % complete 20%
Day 1, 07.09.2011: actual start 05.09.2011, actual finish 07.09.2011, % complete 25%
Only when you provide the final confirmation the actual finish date is confirmed. The various confirmation line items may be viewed via CN48N.
Regards,
Ammar

Behaviour of "Disable/Delete User After End Date" Task

Hi Expert,
We ran the given OOTB task "Disable/Delete User After End Date" and the behavior is always delete. How,if possible, to change the behavior to disable?
Thanks in advance.
SK

In order to change the behavior, you have to set the system manager preference called "Period to Delay User Delete" to something bigger than the task will make the user disabled and will automatically delete them at a future date.

Unable to found Bucket start date and bucket end date in OFSAA 6

Hi,
How to find the Bucket start date and bucket end date in OFSAA 6.
I found following tables to mapped to Dim_Result_Bucket but unable to found columns pointing to Bucket Start Date and Bucket End Date.
Tables:
fsi_income_simulation_buckets
fsi_process_run_history
fsi_time_bucket_master
fsi_lr_irr_buckets_aux
fsi_m_alm_process
Kindly let me know the solution.

Hi;
Please check below link which could be helpful for your issue:
https://blogs.oracle.com/ebs/entry/service_contracts_warranty_created_by
Regard
Helios

Segment: 3.314 date comes after end of valid factory calend

Hi all,
One infopackage load failed while extracting data from R/3 to system t oBW .
The failed message show
+*Errors in source system +
+Segment: 3.314 date comes after end of valid factory calend+
Can any one help me how to rectify this error

Plesae share any inputs on below error
puru

Select Records between Begin Date/Time and End Date/Time

Hi, I need to select records from table GLPCA where the CPUDT and CPUTM are between a START DATE/TIME and END DATE/TIME.
I have the below logic from an SAP Solution, but it doesn't seem to be working right in my opinion. It is picking up records earlier than the date ranges. Can anyone tell me how I might be able to accomplish this? I'm hoping this is an easy one for the ABAPPERs...
Thanks,
START DATE 20091022
START TIME 125736
END DATE 20091022
END TIME 135044
CPUDT 20091022
CPUTM 100257
      SELECT * FROM GLPCA
         WHERE ( CPUDT >= STARTDATE AND ( CPUTM >= STARTTIME OR ( CPUDT <= ENDDATE AND CPUTM <= ENDTIME ) ) ).

Thank you all! I ended up using the following:
SELECT * FROM GLPCA
          WHERE RYEAR IN L_R_RYEAR
            AND ( ( CPUDT = STARTDATE AND CPUTM >= STARTTIME ) OR CPUDT > STARTDATE )
            AND ( ( CPUDT = ENDDATE   AND CPUTM <= ENDTIME )   OR CPUDT < ENDDATE ).
This child was born from the following thread that was found:
update date and time of client record

PR date is after PO Date

Hi all ,
System should not allow to add a PR which creation date is after PO creation date.
System gives an error " PR date is after PO Date , addition not allowed "
Thanks in advance

Hi Shiva,
In the as per the given requirement why do you need this.
as in the industry, generally all the PR's are coming from the different Department and if PO has been created and after that another PR is being generated for the same material, why shouldnt the Purchasing person add the new PR in the old PO, as per the requirement the company can strike a better deal with the purchsing as they are procuring more items.
regards,
yawar Khan

After end date of a beta exam

Hi,
This close date of tis beta exam http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_151 is May 19. So after this and until the release date of production exam, WHAT will hapen with this Forms exam? Can it be scheduled after May 19 (as beta), when normally the exam is in POST BETA REVIEW stare, so if i log in on Pearson account, can i still see 1Z1-151? So it can no longer be scheduled ~10 weeks, until the production exam will be released?
Thanks!
Edited by: Roger22 on 03.05.2012 14:49

Access to a beta exam ends on the beta end date. From that date until the exam is in production, some exams are not available for registration at all. However, some exams will open for pre-registration. Which means that if the 151 beta exam ends on May 19, you can register for the production exam on May 20, but the appointment date will be a date in the future. You will be able to register for a future exam date starting May 20, but you will not be able to TAKE any exam between May 19 and the future start date of the production exam.
You will not be able to register for a BETA exam after the beta end date.
Regards,
Brandye Barrington
Certification Forum Moderator

Internet is not working on cellular data after updating 8.0.2 in iphone 5s , wifi connectivity is fine , but no internet connection error message is start blinking even after cellular data is on , please help .

I am using iPhone 5s , internet is not working on cellular data even after it is on , wifi is working properly . Please help apple team.

Hello Mario:
I'm actually surprised that Apple continues to push out 8.02 without addressing these issues. The problem will only anger more users and certainly finger-poking at Airplane Mode isn't the answer. This is an iOS8 code problem and no amount of 'resetting' is providing a reliable fix/solution that sticks.
These issues with loss of cell connectivity, apps that have lost functionality, etc., which are all directly associated to the arrival of iOS8, are so widespread in the user community and pervasive within individual iPads that it's clear there are significant fundamental problems with this release. Given the problems are so blatant, it's fair to ask the question of how they got by the Apple validation team.
What is the status at Apple on rolling out a fully V&V'd version to resolve this? Respectfully, when it comes to some of my more useful apps, my personal iPad has become a paperweight. The user forums are full of these iOS8 complaints for several weeks and there doesn't seem to be a competent answer from Apple. Even a "We're aware and we're working on it" would be well received.
Any hope that you can provide will be appreciated. (I'll be monitoring the thread on my Dell laptop because, well, my iPad is i-Inop!).
Thanks!

So, my upgrade date and contract end dates are the same?

What exactly does this mean? This was my first contract phone and it ends on 9/11/14. My upgrade date is also 9/11/14. Does this mean I HAVE to go pick out new phones and sign a new contract on that exact date? It seems they'd give you a range of dates so you could do it a little early, before your contract really ends. What happens if I don't make it there on 9/11? My service will be turned off?

lreed89
The upgrade date isn't for one specific date, but for that date onward. You're not required to upgrade. If you choose not to, your account will remain active on a month-to-month basis.

Delivery Block at PGI level based on GI date and Month end date

Business need a check on delivery processing based on the Planned GI date, Month end date and transit period. This transit period is a custom field and dependent on customer. Also it is not maintained anywhere in system. Business store it in some excel format.
The logic needed is: For any given month, the delivery order MUST be goods issued in the same month, i.e. once the order is delivered, the Post goods issue should ONLY be allowed if and only if , the PLANNED GI date ( as maintained in delivery ) + transit time ( at customer level ), falls within the month end date. If not, a block should be applied at PGI and only authorized personnel should be able to release that block.
Also, there will be no check at invoicing VF01 level. Once the PGI blocked is removed, there will be no check on invoicing. The month end date may vary month to month and need to in combination of Sales Org / Plant as mentioned
In addition, the business need an exception report where the information of releasing the block should appear for release date, user id of the responsible person, time sales order no etc. and it should be downloadable.
We can have a custom table to maintain the month end day in given combination.
But I need your expert inputs as-
1-     Can we add this transit period in at customer master data as it is dependent on customer and there are huge no of customers for the sales unit? If not, then how to maintain it; may be a z table?
2-     Based on this logic, what should the code/logic to be written for block at PGI.
3-     How to control the authority check for removing the block.
4-     The source fields for exception report.
Pls revert accordingly.
Many thanks in advance.

Hello,
Please refere the answers to your questions:
1- Can we add this transit period in at customer master data as it is dependent on customer and there are huge no of customers for the sales unit? If not, then how to maintain it; may be a z table?
You can either use some un-used Feild in Customer Master or maintain a Z-Table. I believe maintaining a Z-Table would be easy as you have huge number of Customers. You can also write a dmall program to Pick the Customer-wise transit dates from a excel file & store in Z-Table.
2- Based on this logic, what should the code/logic to be written for block at PGI.
You have explained the requirement well in your thread, you need to explain the same to your ABAPer & Basis person & they would do the needful.
3- How to control the authority check for removing the block.
Basis person would create & assign a Z-Authorization object which the ABAPer would use in his program.
4- The source fields for exception report.
Once you do the above development, your ABAPer will easily pick the required feild in Report as he has already used all the feilds somewhere in his development.
Hope this helps,
Thanks,
Jignesh Mehta

PARAMETER_EXCEPTION: Start date is after end date

Similar Messages

Maybe you are looking for