Parameter fields don't show up on the report

Post Author: Roman
CA Forum: Exporting
Hello,
We upgraded our development platform from VS 2003 to VS 2005 and one of the components which uses crystal report. One issue we can not resolve so far is the parameter fields which are inserted into the reports don't show up (empty) when reports are converted into PDF files.
Thanks a lot,
Roman

Post Author: V361
CA Forum: Exporting
I assume they show up on the report preview, you may want to change the font for the param fields. And just out of curiosity, if you try putting the Parameter fields someplace else, do they show up then ?

Similar Messages

When copying songs to my itunes some of the songs don't show up in the library. I can see that they are being downloaded/copied to my itunes, but I cannot locate them in my library.

When copying songs to my itunes some of the songs don't show up in the library. I can see that they are being downloaded/copied to my itunes, but I cannot locate them in my library?

Do you have a Recently Added playlist? Can you see them there?

Most iPhoto '09 albums don't show up in the screen saver preferences

I just realised that most of my iPhoto '09 albums don't show up in the screen saver preferences... How can I make them visible again?

Bruce Etnyre has a more permanent fix over on the Using 10.5 forum:
You might try this. Go to the:
Macintosh HD/Users/yourusername/Library/Preferences/ByHost folder
(where “yourusername” is the short name of your computer, like baumgarten - the folder looks like a house/home)
and move these files to the Trash:
com.apple.screensaver.XXXXX.plist
com.apple.screensaver.slideshow.XXXXX.plist
and this one, if you have it:
com.apple.iphotomosaic.XXXXX.plist
The XXXXX before the .plist is a hexadecimal string.
Regards
TD

IPhoto '09 albums don't show up in the screen saver preferences

I just realised that most of my iPhoto '09 albums don't show up in the screen saver preferences... How can I make them visible again?

Bruce Etnyre has a more permanent fix over on the Using 10.5 forum:
You might try this. Go to the:
Macintosh HD/Users/yourusername/Library/Preferences/ByHost folder
(where “yourusername” is the short name of your computer, like baumgarten - the folder looks like a house/home)
and move these files to the Trash:
com.apple.screensaver.XXXXX.plist
com.apple.screensaver.slideshow.XXXXX.plist
and this one, if you have it:
com.apple.iphotomosaic.XXXXX.plist
The XXXXX before the .plist is a hexadecimal string.
Regards
TD

Templates don't show up in the Assets Templates panel !?

I made some templates but a few don't show up in the Assets > Templates panel.
I opened all the .dwt files in Dreamweaver (within the Templates folder), then closed and restarted Dreamweaver. That should “force” Dreamweaver to recognize the templates so that they show up in the Assets panel, but DW didn't.
I also deleted the DW cache.
What could I do wrong ?

That won't work either !
I made a new page from that tmpl and saved it. Closed DW ... opened it ... but nothing.
Also deleted the cachefile while DW was closed.
Strange !?

Pictures don't show up in the movie

Hi
I'm doing my first project with iMovie. The pictures I added from iPhoto don't show up in the movie. Instead it says that the "original clip is missing".
I added them as it is explained in the guidelines...
Thank you!

Hi jazz44,
Welcome to the Support Communities!
Are you accessing the pictures from the Camera Roll in the Photos app?
The articles below may be able to help you with this issue.
Click on the links below to see more details and screenshots.
iMovie for iOS: Why do I receive a message indicating that iMovie can't access my videos and photos?
http://support.apple.com/kb/TS3391
Follow these steps to access your photos and videos:
Tap Settings on your iOS device.
Tap Location Services. (You may have to tap General and then tap Location Services, depending on your version of iOS).
Set the iMovie switch to On.
Also, check the Privacy settings for the iPad to make sure iMovie has been granted access to your Photos:
See page 119 of the iPad User Guide:
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
Go to Settings > Privacy. You can see which apps have requested and been granted access to the following information:
Contacts
Calendars
Reminders
Photos
Bluetooth Sharing
Twitter
Facebook
You can turn on or off each app’s access to each category of information.
For more information about iMovie for iOS, please refer to the online manual below:
iMovie Help: Get answers fast
http://help.apple.com/imovie/ipad/1.4/index.html
Enjoy!
- Judy

Why is it that some missed calls don't show up in the missed calls list?

Why is it that some missed calls don't show up in the Missed Calls list?

Missed calls can only appear in your missed call list if your phone knows about them. In other words, if the phone rang, but you did not answer.
If a call was missed because your phone was turned off or not in a strong enough service area to receive the call, then it will not show up on your phone.

Notes and other fields don't show up in Contacts on my iPod Classic 160GB

I don't know if this is just a bug or if I missed a new option somewhere to hide/show Notes and other fields in Contacts, but they don't show up at all. This problem is specific to the new 160GB iPod I bought today. Notes show up fine on my 4GB Nano (2G) and old 3G iPod.
I would at least like confirmation from some other people that the Notes field is not showing up in your contacts.
I just ran through a few other contacts and it appears this is a more serious sync problem. There is a field listed in my Address Book as "work" that is showing up as "home" on the 160. The field is identified correctly on my nano. I also noticed that the field for the iChat id is completely missing from all the iPods.
This is a pretty serious bug for anyone that uses their iPods for Contacts. Since someone is bound to ask, yes I did try resetting the iPod. I even went as far as completely restoring it from both Windows and the Mac, but always saw the same problem, so I went back to my default Mac setup.

I did another restore and let iTunes move my whole library over before going back to the summary and syncing contacts, but I got the same result. No notes on any contacts and various contact fields that are named incorrectly compared to the Address Book originals.
I would appreciate confirmation of this bug or people with 80/160 classics identifying that notes due show up in their contacts so that I can post an accurate description to the bug report form.
Thanks!

Why do my App Reviews and Ratings don't show up in the App Store?

Hey everyone..
    I've been having trouble for at least a year now where whatever Review I write does not show up anywhere. I have done a lot of research on this subject prior to opening this Thread here, and have obvioudly not found anything on the subject.
I am aware as I read somewhere that for a review to display, the app needs to have at least 5 reviews, (which I also find obscure). We are talking about apps that have loads of reviews already posted.
It's needless to say HOW annoying it is to spare PRECIOUS time to review an app, (whether for positive, negative, neutral), and find out that it just went to waste. I never had this problem till about 1 year ago, where I noticed that no matter where I wrote a review, (from my macbook, within the store, from my iPad mini, from my ipod touch), it just NEVER showed up even after days or even weeks when I checked back.
Before I start wrting the review it asks for my Apple store password, (so far so good), after I'm done with the rating and Review, I press submit and .....nada....I don't get a confirmation or something that will say it's under Review from the App store. When I try to repeat the process, get out of the app I'm trying to review, and go back to write my Review, what I wrote is just simply sitting there, together with my Rating as if nothing happened.
I am aware that others have written before about this issue to no avail, now can SOMEONE please put an end to this MADNESS and answer one and for ALL the very, lately, disappointed, Apple fans that keep accumulating....? Can Apple give us an OFFICIAL explanation/solution to this very annoying issue? Or does it prefer to conveniently leave it as is for some "obscure" reason...?
Any replies will be more than appreciated...
Cheers

Ok everyone...
So, after going through a hundred steps to manage and contact Apple Support via e mail, I sent them an e mail and got a reply saying that they will get in touch with me within 48hrs. Today, (24hrs), I received a reply telling me that they understand my frustration and has been an "on going issue". He wanted alse to verify what my nickname was for my the Reviews I had given.
   After revisiting for the millionth time my iTunes store Account, to go to settings, and manage Reviews, (which is what I always did to check and see if they show up), to find out if my nickname had changed for some reason, I pressed on some older reviews, (like from 2010, which I remember had shown up), to check out my nickname.
I verified my nickname being the same as I remember. The 2nd app I checked which I knew I had reviewed, but from last year, was not showing. So, it dawned on me to press the “All Versions” options on the reviewing section of the app…and…voila….there it was. So, I took it further and looked at other even more recent reviews I had written and I also found out that they showed under the “All Versions” option.
   Then I checked my last 3-4 that I did within the last few months that I knew did not show up and the apps also had no Upgrades that I knew of. Then, I discovered the sorting options , (on the right side), for showing Reviews. It seems like that it automatically sorts them out by “Most Helpful”, (which is odd), so I chose “Most Recent”…and….voila again, my review was beautifully sitting there with my nickname and everything…I couldn’t believe it.
Now I’m going to try and find if there is a way to have the “Most Recent” always as default…is there…? But it makes me wonder if all of you guys have the same problem and if the solution is indeed the same, (sorting out by most Recent or whatever other option will make your review show up). Give it a try and see how it works out for you. Please take the time to post your findings here. It would be helpful for everyone else as well. I wonder why Apple has not picked up on this?
I have to give it to them for the quick reply though..(mind you my e mail was quite.."angry"..).
Thanks again for reading..

Added fields does not show up in the RSA6

Hello.
Problem 1:
I am enhancing 0bbp_td_sc_1. I added a field to the structure, but it does not show up in the rsa6. ( I double clicked on the extractor name). If I go to the extractor structure (BBP_SC_BW_GET_TD_STRUC), I am able to see the append. The structure is activated. The append structure is also activated (Zabbp_sc_bw_get_td_struc).
What can be wrong? I did not see the added the field in the ROOSFIELD table either.
Problem 2: What is the difference If I populated the field value from RSU5_SAP_BADI to the rsap001 user exit EXIT_SAPLRSAP_001?
I am not able to run debug RSU5_SAP_BADI. STOP does not stop. While I debug, I am able to see the field ( The field I added from problem 1). But the value never populated.
I am able to run the debug for EXIT_SAPLRSAP_001. I see the data populated for the field. But in RSA3 result, I am not able to see it.
Thanks in advance.

Hi
1. this is usualy the case if the append struct is not active or you did not add the new fields in the append struct.
I would suggest to remove the fields save activate and re do the process making sure you either use an existing append struct or create a new one.
2. BADI are different then UE in the way they are implemented. I will recommend using UE.
You will not see the enhanced fields in the out put of RSA3 so I stop on the last line and check the values in the struct.
to debug I would either go to the UE (in a different session) and put a break point there and run RSA3 or check the debug in RSA3 and then find the SAPEXIT that calls the UE.
I hope this helps.
Reg's
Edan

KOMK Field is not showing up in the field catalog for creating cond. tab

Hi Guys,
I add a new field in KOMK table.
Its showing up in the Field catalog but when I create a condition table, its not showing up in that catalog to choose.
Thank U for Ur time.
Cheers
S Kumar

Hi,
Perhaps you have checked it. Do you check if in SM30 for view VV_T681F_VA you have this field?
Regards,
Eduardo

When people activate connection keys, they don't show up in the Admin users list. Why?

I send people their key by e-mail. In most cases, when they click on it and it loads Contribute and they plug in the password, it will show up in the Admin listing of users. Other times, the same process is followed but they don't show up on any user list. What can I do to get them listed?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

The preview and cover flow don't show thumbnails of the quicktime videos. How to fix?, The preview and cover flow don't show thumbnails of the quicktime videos. How to fix?

When I upgraded to Mavericks the cover flow or the preview pane in finder don't show a thumbnail of an uncompressed quicktime movie. I use this to search for the correct clip so it was very useful in prior versions of OS X but appears to be left off in Mavericks. If anyone knows a work around I would appreciate it since I work with thousands of video clips. To click each one seems very tedious.
Also, when I click on an uncompressed video, quicktime "converts" the video to some different format. Why doesn't it just play the video instead of converting? Is there a way to stop this? I hate have to say - no I don't want to save this file.
Arrgh!

Does anyone in the community have insite into this issue (same with animation compressed QT's). Is this just the way it is moving forward (a terrible thing) or is it a bug that will be fixed in the near future. Apples silince on if this is a "feature" or a "bug" is frustrating.
Thanks.
Lawrence

SQL Query for SSRS has data but fields don't show that data

I am having a strange issue here with my new report;
First off, this report is an availability report for employees. If they are busy then a 0 should be displayed for that Hour and if they are free then a 1 is to be displayed. There are 2 parameters setup for use in this query, one is a Date/Time parameter
and the other is a Text parameter where another Dataset Query is grabbing the data for (Departments)
I have 2 Parameters, 1 is for a Department and the other is to select the date.
                       Hour1     Hour2    Hour3     Hour4    Hour5
Hour6    Hour7
Smith, John     |     1     |     0     |     0     |     0     |
1     |     1     |     1     |
Som, One        |     1    |     1     |     1     |     0
    |    0     |     1     |     1     |
When I run the query in the Query Designer for the Dataset the information is displayed correctly and as I would expect it, however, when I run the Report and choose the same information for the 2 parameters then the report only ever shows all 1's;
Smith, John     |     1     |     1     |     1     |     1     |
1     |     1     |     1     |
Som, One        |     1    |     1     |     1     |     1
|    1     |     1     |     1     |
I've tried searching but didn't know what term to use that describes what is going on.
Like I said, this works if ran in SSMS and works when ran in the Query Builder of SSRS but when it comes to displaying the data on the report the incorrect information is displayed.
Any help would be appreciated.
EDIT
I have also ran the Report Table Wizard with the same query and chosen Names as the row and Hours as the columns and the same thing happens - just all 1's are displayed even thought the query in Query Builder shows correct information.

The difference running the query directly in query designer and when the report runs is that you manually type in values for the parameters when running query designer. It is likely that the parameter values from the report have a different syntax than you
expect. This will happen especially when setting the available values of a parameter from a data cube query. A value from an analysis cube may be displayed in the query designer as "\Project\Iteration Node" while the actual value is "[Work Item].[Iteration
Hierarchy].[Iteration2].&[-7189901615194941888]&[-8272609059741292246]". Very different as you can see. This example is from the TFS analysis server.
The best way to validate that your parameters are passing the values (and syntax) you expect is to add text boxes to your report for each parameter and set them to display Parameters!ParameterName.Value.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Contacts don't show up in the Cloud

I can't save my contacts in the cloud, i have the cloud turned on and when i set up a reminder on my iphone 5 it shows up in the cloud but contacts do not. They only show up if i manually add new ones to the phone. I had a blackberry prior to the iphone, i saved the contacts to my computer as a "windows contact" i don't use outlook or anything else. I then added them to iphone. I wanted to update, edit and delete certain contacts and it would be easier do it from a computer. Oddly enough the contacts I saved on my computer as indivual files are being updated as i change them on the phone fyi.
I'm getting increasing annoyed by not having them in the cloud so I could really use some direction here please.

i believe so
[IMG]http://i113.photobucket.com/albums/n238/mickey01023/photo.png[/IMG]

Parameter fields don't show up on the report

Similar Messages

Maybe you are looking for