Parameter for selection screen

Hi All,
I want a parameter (Input box) in my selection-screen which can hold 250 characters . I don't want to make screen for this, I want to do it using selection-screen only. Is it possible to do this.
Please provide me solution for this.
Thanks.
Shweta

Hi All,
I am very thankful to u all getting involved in providing solution to my thread. I am also trying to get it for select-option but not getting.
As Dande suggested the table name holding 250 character field and the syntax I tried using it but its holding only 45 characters. I am not sure whether it will hold more than 45 characters or not.
Dilleep, As Naveen suggested for parameter it is working fine for me , I am using Ecc 6.0 .
Amit , its a request from my side , I f u have any solution or suggestion related to my query please do provide it, I will appreciate and and I will be v thankful to u , but if u don't have any suggestions please don't give such type of comments "Why don't u try it yourself", As I tried it , and tryining the same (becoz its my problem) ,not getting proper solution so posting in the thread. If u have such type of answer please ignore the thread.
Thanks.
Shweta.

Similar Messages

Parameter on selection screen

Hi Gurus,
What I need to do is to put the default value for parameter on selection screen. It should be the email address of the person who run this program (from user profile).To get this value I called BAPI_USER_GET_DETAIL . How to pass the value to the parameter on selection screen now?
Thank you in advance.
Regards,
Lena

Try this:
REPORT ztest LINE-SIZE 80 MESSAGE-ID 00.
PARAMETERS e_mail TYPE bapiadsmtp-e_mail.
DATA: return TYPE TABLE OF bapiret2,
      email TYPE TABLE OF bapiadsmtp WITH HEADER LINE.
AT SELECTION-SCREEN OUTPUT.
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
    EXPORTING
      username = sy-uname
    TABLES
      return   = return
      addsmtp = email.
LOOP AT email.
    e_mail = email-e_mail.
    EXIT.
ENDLOOP.
Rob

How to set default variant for selection screen

Hi,
I want to make one variant as default for selection screen for one user.
For eg., take COOIS. For the selection screen, i have 3 variants. But i want one variant to be default. Thsi is not for all users. Thsi is for particular user.
I am not seeing any way to do this. please help me..
Thanks
Srini

Hi,
If you are using Z program then you can ask your developer to get Variant name Runtime from Parameter ID.
This means you decide a Parameter ID name : ZVAR in your Z program and ask your developer to load variant each time your Z program loads.
Now, second step will be using SU01 transaction you can set value of ZVAR in Parameters tab for the user. This value will be the variant which you created for this user.
This will solve your problem and you can make n number of variants and assign it to different users.
Regards,
Arpit

How can we place a F4 help in a parameter in selection screen

Hi,
How can we place a F4 help in a parameter in selection screen. Can we do add a Process 0n Value request similar to a module pool prg in stadard report program.
saji

Hello Saji,
Try below attached report.
Regards,
Naimesh.
Reward, if it is useful..!
REPORT ZTEST_NP_1.
DATA: HELPVAL1 LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE .
DATA: VALUE_TAB     LIKE PDTASK-OTEXT OCCURS 2 WITH HEADER LINE.
DATA: VALUE         LIKE FEBMKA-BANKN,
      GIVEN_VALUE   LIKE HELP_INFO-FLDVALUE.
DATA: IT_T005T LIKE T005T OCCURS 0 WITH HEADER LINE,
      IT_T002T LIKE T002T OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK BLK1 WITH FRAME TITLE ABC.
PARAMETERS:       P_SPRAS LIKE T002T-SPRAS,
                  P_LAND1 LIKE T005T-LAND1.
SELECTION-SCREEN: END   OF BLOCK BLK1.
INITIALIZATION.
ABC = 'Selection Criteria:'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LAND1.
PERFORM VALUE_REQUEST_LAND1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_SPRAS.
PERFORM VALUE_REQUEST_SPRAS.
*&      Form VALUE_REQUEST_land1
FORM VALUE_REQUEST_LAND1.
*---- Reading the Screen values.
DATA: LT_DYNPFIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
        LV_DYNAME     LIKE D020S-PROG,
        LV_DYNUMB     LIKE D020S-DNUM.
*-------Append field which you want to read from the screen
LV_DYNAME = SY-REPID.
LV_DYNUMB = SY-DYNNR.
LT_DYNPFIELDS-FIELDNAME = 'P_SPRAS'.
APPEND LT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            DYNAME     = LV_DYNAME
            DYNUMB     = LV_DYNUMB
       TABLES
            DYNPFIELDS = LT_DYNPFIELDS.
SELECT * FROM T005T
         INTO TABLE IT_T005T
         WHERE SPRAS = P_SPRAS.
    REFRESH: HELPVAL1, VALUE_TAB.
    CLEAR:   HELPVAL1, VALUE_TAB, GIVEN_VALUE, VALUE.
*---- Append field name for the columns in the help popup
    HELPVAL1-TABNAME    = 'T005T' .
    HELPVAL1-FIELDNAME = 'LAND1' .
    HELPVAL1-SELECTFLAG = 'X' . " will return the value on the screen
    APPEND HELPVAL1 .
    CLEAR HELPVAL1 .
    HELPVAL1-TABNAME    = 'T005T' .
    HELPVAL1-FIELDNAME = 'LANDX' .
    HELPVAL1-SELECTFLAG = ' ' .
    APPEND HELPVAL1 .
    CLEAR HELPVAL1 .
    LOOP AT IT_T005T.
      VALUE_TAB = IT_T005T-LAND1.
      APPEND VALUE_TAB.
      VALUE_TAB = IT_T005T-LANDX.
      APPEND VALUE_TAB.
    ENDLOOP.
    GIVEN_VALUE    = P_LAND1.
    CALL FUNCTION 'HELP_VALUES_GET_WITH_VALUE'
       EXPORTING
            DISPLAY      = SPACE
            GIVEN_VALUE = GIVEN_VALUE
       IMPORTING
            SELECT_VALUE = VALUE
       TABLES
            FIELDS       = HELPVAL1
            VALUETAB     = VALUE_TAB.
    IF NOT VALUE IS INITIAL.
      P_LAND1 = VALUE. " Assing value to the parameter
    ENDIF.
ENDFORM.                    " VALUE_REQUEST_land1
*&      Form VALUE_REQUEST_SPRAS
FORM VALUE_REQUEST_SPRAS.
REFRESH: HELPVAL1, VALUE_TAB.
CLEAR:   HELPVAL1, VALUE_TAB, GIVEN_VALUE, VALUE.
HELPVAL1-TABNAME    = 'T002T' .
HELPVAL1-FIELDNAME = 'SPRSL' .
HELPVAL1-SELECTFLAG = 'X' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
HELPVAL1-TABNAME    = 'T002T' .
HELPVAL1-FIELDNAME = 'SPTXT' .
HELPVAL1-SELECTFLAG = ' ' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
SELECT * FROM T002T
         INTO   TABLE IT_T002T
         WHERE SPRAS = SY-LANGU.
LOOP AT IT_T002T.
    VALUE_TAB = IT_T002T-SPRSL.
    APPEND VALUE_TAB.
    VALUE_TAB = IT_T002T-SPTXT.
    APPEND VALUE_TAB.
ENDLOOP.
GIVEN_VALUE    = P_SPRAS.
CALL FUNCTION 'HELP_VALUES_GET_WITH_VALUE'
       EXPORTING
          DISPLAY      = SPACE
          GIVEN_VALUE = GIVEN_VALUE
       IMPORTING
          SELECT_VALUE = VALUE
       TABLES
          FIELDS       = HELPVAL1
          VALUETAB     = VALUE_TAB.
IF NOT VALUE IS INITIAL.
    P_SPRAS = VALUE.
ENDIF.
ENDFORM.                    " VALUE_REQUEST_SPRAS

How to create variant for selection screen which is in subscreen

Hi,
How to create variant for selection screen which is in subscreen in a module pool program?
it is very urgent.
Thanks in advance.

Hi,
You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
Regards
Sudheer

Code for selection screen, urgent

Hi Everyone,
I need code for selection screen.
I have four radio buttons, p1, p2,p3,p4(assume)
If I select second radiobutton, remaining three radiobuttons should be in disable mode and also the information under them should be in disable mode. Give the coding details. Thanks in advance. U will be rewarded.
Regards,
Nagaraju

Hi,
REPORT ZTEST222 .
PARAMETERS : p_add RADIOBUTTON GROUP radi
                         USER-COMMAND radio MODIF ID MOD,
p_disp RADIOBUTTON GROUP radi DEFAULT 'X' MODIF ID pod,
p_chng RADIOBUTTON GROUP radi MODIF ID rad,
p_er_log RADIOBUTTON GROUP radi MODIF ID cod.
SELECT-OPTIONS : s_idn    FOR vendor   MODIF ID mod,
                               s_pcode FOR ws_c_pcode MODIF ID pod.
PARAMETERS: p_plant    LIKE zaw_pol_plan-plant   MODIF ID rad,
             p_zzvend   LIKE zaw_pol_plan-zzvendor   MODIF ID cod.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_add EQ 'X'.
      IF screen-group1 EQ 'MOD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_disp EQ 'X'.
      IF screen-group1 EQ 'POD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_chng EQ 'X'.
      IF screen-group1 EQ 'RAD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_er_log EQ 'X'.
      IF screen-group1 EQ 'COD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
Pls. reward if useful
    ENDLOOP.
Pls. reward if useful

How to write HTML code in Web Template for selection screen

Hello All,
Is it possible to write a html code in the web template html tag so that the output of the html is displayed in the selection screen, i.e before the execution of query.
I know that we can write html, which will be displayed once the query has been executed, but can it be done for selection screen.
if so, how.
My exact requirement is : to display a 2-3 lines of text in the selection criteria screen - sort of, various options available to user for entering values in the selection screen. I was thinking of putting this text using HTML code in the selection screen.
Regards,
Nagendra.

Hi Erick,
No, unfortunately nobody replied to this thread. So i assumed it is not possible to modify the selection screen thru html code.
Btw, as my requirement was to provide user with multiple answers on the selection screen. I did the validations on customer exit and popped an errror dialog when applicable.
Regards,
Nagendra.

Change default value (200) of Max No of Hits for selection screen in WAD

How do i change the default value of Maximum Number of Hits from 200 to 1000 for selection screen's find box in Web Application Designer .
Thanks in Advance
Points will be surely Rewarded

Dear Hammad,
Please refer to the wiki created by me,
http://wiki.sdn.sap.com/wiki/display/BI/Information+on+the+user+setting+for+the+selector+dialog
Regards,
Arvind

Dinamic variant for selection screen

Hi,
I got a requirement where i need a Dynamic variant for selection screen .There is a date field in the selection screen i want to create a variant such that when i choose it,it should give the current day date in selection screen.can anyone help me.
Regards,
Ravi

Hi,
Using Customer Exit code you can give it.
Create a Customer Exit Variable and write simple code in CMOD. See the usefull Exit code for reports in the following url.
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
WHEN 'ZV_DAT'.
    IF i_step = 1 .
      CLEAR l_s_range.
      l_s_range-low = sy-datum.
      l_s_range-opt = 'EQ'.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
    ENDIF.
Thanks
Reddy

Transaction Variant for Selection Screen

Hi, experts!
A question regarding transaction variants: Is it possible to create screen variants and transaction variants via SHD0 for selection screens? I' ve created a customer report with one selection screen including parameters and select options and would like to provide the users with a variant transaction for this.
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported. And trying to create a transaction variant via SHD0 fails because values entered in the selection screen parameters and select options help screens are not saved and presented.
Any hints are more than welcome!
Regards,
Thomas

You wrote
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported.
But, give the variant a name beginning with "CUS&" and this variant will be transported. Variant beginning with "CUS&" or "SAP&" are so-called "system variant" and are transported automatically. You can then copy the transaction code and use this new variant in the new transaction.
Regards,
Raymond

Global Variable for selection screen variable

Hi All,
We need to create a report where calendar day has to be included in the selection screen.Later after executing the report we should be able to retrieve the selection screen input for calendar day and modify it and use the modified one for other calculations.Can somebody help me out in finding the global variable in the variable exit where we find all the inputs for selection screen variables....
Regards,
Shravani

shravani,
I_vnam will store the varaible names...if you have varaible in the query...
please use this code for ur help...
DATA: ww_der_date LIKE sy-datum,
        wzdate LIKE sy-datum,
        wzact_gi_dte TYPE /bi0/oiact_gi_dte.
wzact_gi_dte = sy-datum.
IF i_step = 2.
    READ TABLE i_t_var_range INTO wa_i_t_var_range WITH KEY vnam =
    'ZNODAYS'.
    ww_der_date = sy-datum - wa_i_t_var_range-low.
        CLEAR wa_i_t_var_range.
    IF i_vnam = 'ZVAGIDCUSTEXIT'.
      CLEAR l_s_range.
      l_s_range-low    = ww_der_date .
      l_s_range-high   = wzact_gi_dte.
      l_s_range-sign   = 'I'.
      l_s_range-opt    = 'BT'.
      APPEND l_s_range TO e_t_range.
      CLEAR l_s_range.
    ENDIF.
ENDIF.
in this case user will enter no.of days in ZNODAYS and that being is used in calculation and used in the next varaible....

Default value for selection screen field

Hi all,
I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
How can I do it?
Thanks
Rahul

Hi Rahul,
In the INITIALIZATION event we can set the default values for selection screen fields.
INITIALIZATION.
loop at screen.
if screen-name = 'S_MATNR-LOW'.
CLEAR S_MATNR.
s_matnr-low = '1234'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr.
CLEAR S_MATNR.
s_matnr-high = '5678'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr
clear s_matnr.
endif.
endloop.
Hope it helps.
Mark if useful
Regards,
Saumya

How to add f4 help for a parameter in selection screen (Report)

hai friends
       I am hving a pblm regarding the F4 help in selection screen for a parameter field ,currenly this parameter field is for personnel number , now in f4 help all the personnel numbers r listing ,i need to include the name of the corresponding personnel numbers along with it ,how do i do that .please give me a help.
thankyou

Hai
you first extract personal number and name into one internal table say itab.
THEN CALL THE FM.
AT SELECTION-SCREEN ON VALUE REQUEST FOR P_PARAMETER.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD     = P_PARAMETER
       DYNPPROG     = SY-REPID
      DYNPNR       = SY-DYNNR
      VALUE_ORG    = 'S'
      WINDOW_TITLE = 'Open Quantity'
    TABLES
      VALUE_TAB    = ITAB.

Showing dim for parameter in selection screen

hi,
i would like to have 2 parameters become dim (not active) when selection screen showing so that user not allowed to enter anything.
i tried both method but also not working. what i have missed.
thanks
p_1 DEFAULT 'SS' MODIF ID dim,
p_2 DEFAULT 'MARA' MODIF ID dim,
method1
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'dim'.
    SCREEN-INPUT = '0'.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
method2
INITIALIZATION.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'p_1' OR
       SCREEN-NAME = 'p_2'.
       SCREEN-INPUT = 0.
       MODIFY SCREEN.
    ENDIF.
ENDLOOP.

Hi,
write the method 2 in AT SELECTION-SCREEN OUTPUT. e.g.
At Selection-screen output.
LOOP AT SCREEN.
    CASE screen-group1.
      WHEN 'DIM' .
        screen-invisible = 0.
        screen-active = 1.
    ENDCASE.
    CASE screen-name.
      WHEN 'p_1'.
      screen-input = 1.
      WHEN 'p_2'.
     screen-input = 1.
     ENDCASE.
    MODIFY SCREEN.
ENDLOOP.
Regards,
Amit

Help Needed for selection screen

Hi Experts
I'm doing one report of pm module using one standard program called me RIQMEL10
             my query is if u execute this stand.prog u'll get one selection screen ,and having three selction-screen blocks. first sel-scr block name is Notification status this selection screen is calling dynamically by using sap stand.prog SAPDBQMI
                SCR NO : 1000
can any one send me the default code of this selection screen block ( Notification status ) which sap is providing .

INCLUDE DBQMISEL
It will be automatically included into the database program.
If the source code is automatically generated,
please perform the following steps:
1. Replace ? by suitable names (at most 8 characters).
2. Activate SELECT-OPTIONS and PARAMTERS (delete stars).
3. Save source code.
4. Edit database program
Hint: Syntax-Check is not possible within this Include!
It will be checked during syntax-check of database program.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-011.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS dy_ofn LIKE rihea-dy_ofn FOR TABLE diqmel.
SELECTION-SCREEN COMMENT 3(11) text-001
                                      FOR FIELD dy_ofn ID 001.
PARAMETERS dy_rst LIKE rihea-dy_rst FOR TABLE diqmel.
SELECTION-SCREEN COMMENT 16(10) text-002
                                       FOR FIELD dy_rst ID 002.
PARAMETERS dy_iar LIKE rihea-dy_iar FOR TABLE diqmel.
SELECTION-SCREEN COMMENT 29(10) text-003
                                       FOR FIELD dy_iar ID 003.
PARAMETERS dy_mab LIKE rihea-dy_mab FOR TABLE diqmel.
SELECTION-SCREEN COMMENT 42(10) text-004
                                       FOR FIELD dy_mab ID 004.
SELECTION-SCREEN COMMENT 52(10) text-005
                                       FOR FIELD selschem ID 005.
PARAMETERS: selschem LIKE tj48t-selid FOR TABLE diqmel.
SELECTION-SCREEN PUSHBUTTON 73(5) p_addr USER-COMMAND addr
FOR TABLE diqmel ID 006.
PARAMETERS dy_adrfl NO-DISPLAY FOR TABLE diqmel.
SELECTION-SCREEN COMMENT 79(30) ad_icon FOR TABLE diqmel ID ic1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-012.
SELECT-OPTIONS:
qmnum                  FOR diqmel-qmnum MATCHCODE OBJECT qmeg,
qmart                  FOR diqmel-qmart,
tplnr                  FOR diqmel-tplnr NO-DISPLAY,
strno                  FOR diqmel-strno MATCHCODE OBJECT iflm,
equnr                  FOR diqmel-equnr MATCHCODE OBJECT equi,
matnr                  FOR diqmel-matnr MATCHCODE OBJECT mat1,
serialnr               FOR diqmel-serialnr,
deviceid               FOR diqmel-deviceid,
aufnr                  FOR diqmel-aufnr MATCHCODE OBJECT orde.
*--- date from - until
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-009 FOR FIELD datuv.
SELECTION-SCREEN POSITION 33 FOR TABLE diqmel.
PARAMETERS datuv LIKE rihea-termab FOR TABLE diqmel DEFAULT sy-datum.
SELECTION-SCREEN COMMENT 51(6) text-010 FOR FIELD datub.
PARAMETERS datub LIKE rihea-termbi FOR TABLE diqmel DEFAULT sy-datum.
SELECTION-SCREEN END OF LINE.
*--- partner function, partner
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(9) text-006 FOR FIELD dy_parvw.
SELECTION-SCREEN POSITION 10 FOR TABLE diqmel.
PARAMETERS dy_parvw LIKE ihpa-parvw FOR TABLE diqmel
            AS LISTBOX VISIBLE LENGTH 22.
SELECTION-SCREEN POSITION 33 FOR TABLE diqmel.
PARAMETERS dy_parnr LIKE ihpa-parnr FOR TABLE diqmel VALUE-REQUEST.
*--- button classification
SELECTION-SCREEN PUSHBUTTON 73(5) text-013 USER-COMMAND clse
FOR TABLE diqmel.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block2.
*--- freie Abgrenzungen für log.Datenbankselektion -
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE diqmel ID 010.
SELECTION-SCREEN BEGIN OF VERSION 001 text-v01.
SELECTION-SCREEN EXCLUDE PARAMETERS: dy_mab, dy_ofn, dy_rst, dy_iar,
                                     selschem, dy_adrfl.
SELECTION-SCREEN EXCLUDE IDS: 001, 002, 003, 004, 005, 006, 010, ic1.
SELECTION-SCREEN END   OF VERSION 001.
SELECTION-SCREEN BEGIN OF VERSION 002 text-v02.
SELECTION-SCREEN EXCLUDE IDS: 010.
SELECTION-SCREEN END   OF VERSION 002.
*--- Parameter für Selektionssteuerung -> es sollen nicht     -
*--- automatisch alle Segmente der log.DB selektiert werden   -
*--- neu mit P30K047900                                       -
PARAMETERS: ldb_ihpa NO-DISPLAY DEFAULT 'X' FOR TABLE diihpa,
            ldb_iflo NO-DISPLAY DEFAULT 'X' FOR TABLE diiflo,
            ldb_equi NO-DISPLAY DEFAULT 'X' FOR TABLE diequi,
            ldb_qmfe NO-DISPLAY DEFAULT 'X' FOR TABLE diqmfe,
            ldb_qmma NO-DISPLAY DEFAULT 'X' FOR TABLE diqmma,
            ldb_qmmx NO-DISPLAY DEFAULT 'X' FOR TABLE diqmmax,
            ldb_clas NO-DISPLAY DEFAULT 'X' FOR TABLE diclass,
            ldb_clda NO-DISPLAY DEFAULT 'X' FOR TABLE dicldat,
            ldb_qmsm NO-DISPLAY DEFAULT 'X' FOR TABLE diqmsm,
            ldb_qmsx NO-DISPLAY DEFAULT 'X' FOR TABLE diqmsmx,
            ldb_aufk NO-DISPLAY DEFAULT 'X' FOR TABLE diaufk.
regards
vinod

Parameter for selection screen

Similar Messages

Maybe you are looking for