Parameter for user locked when no connection
Where is the parameter for the number of days before automaticaly lock of the users ?
In our system, the users are locked automatically by SAP after 1 month of inactivity !!
Where is the parameter who control yhis ?
Jean,
Where is the parameter who control yhis ?
In RZ10, login/password_max_idle_productive users who are idle for 30days will be automatically locked.
2. Use TU02 -you will get to know parameters active in the SAP system.
http://sap.ittoolbox.com/groups/technical-functional/sap-security/rsparam-settings-password-1185954
Thanks,
Sri
Edited by: sri on Jul 27, 2010 8:41 PM
Similar Messages
-
SIM card locks when I connect to my computer
Hi,
For some reason, my iphone's SIM card regularly locks when I connect to my MacBook Pro.
This means...without me always having time to see it, that my phone is basically out of use when I think it is charging or synching. Quite annoying, is there anything I should do about this?
I called my telephone carrier and they said they'd never heard of this problem thatTwo things you can check that may be causing this: 1. Settings>Phone>Sim Pin do you have a sim pin enabled? 2. Some carriers require a PUK lock on all their sims, in the US you can get instructions on how to unlock the sim by using the PUK code online in your account info. I'm guessing that your sim either has a sim pin enabled or a PUK lock. If the latter, your carrier will need to supply the PUK code. Or, get a new sim.
-
I just got a new iMac and want to use it for iTunes. when i connect my iPhone how do i transfer everything in my iPhone to this new computer?
If you do not have access to your old PC/Laptop and therefore cannot transfer your iTunes library, this document is very useful https://discussions.apple.com/docs/DOC-3141
-
i already downloaded the ios 6.0.1 for my iphone when i connected my another iphone to update its asking again to download the ios 6.0.1 how can i use previously downloaded software
plzz help me as soon as possible
-
Hi, I have the iPhone 4, 32GB, version 4.3.5 (8L1) and for some reason when I connect it to the laptop, it starts synchronising but never goes beyond step 1. It goes on syncing forever, without actually doing anything. I have tried everything, wiped the phone numerous times, deleted all files from the laptop but still no resolution. As a result, the phone does not really synchronise.
This started somewhere in May 2011 when I upgraded what proved to be a problematic s/w version and the phone has not recovered since.
Now I cannot update the iPhone s/w any longer.
Any clue?You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
-
My Itunes locks when I connect my Ipod classic. I have the latest version of Itunes as of 10/31/11. Anyone have any fixes?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I am using apple iPod-suffle model,I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
ITunes not asking for passcode lock when connecting
Just seen this on the Apple site:
"+If you protect your iPhone or iPod touch with a passcode, you will be prompted to enter the passcode when you connect to iTunes. Once you successfully enter the passcode, iTunes will recognize that device as authorized and you will not require your passcode to back up or sync+."
I never get asked to enter a passcode when I connect my iPhone to iTunes. Ever.
I didnt think it was a problem until I read this. Should I be getting prompted?
Message was edited by: nishronsHi nishrons,
Did you ever find a resolution to this issue? I am having the same problem and have posted a question about it at [this Discussions page|http://discussions.apple.com/message.jspa?messageID=10929808#10929808]. -
PC Locks when i connect my generation 3 Nano
When i connect my Nano to pc it locks the pc, i have tried resetting and restoring the Nano, it is like magic un connect it pc comes back to life. Tried it on anotehr pc works ok. Could it be service packs or similar?
Thanks for your help
YorkieHi mz,
Check this post out for potential fixes to your freezing problem:
Troubleshooting an unexpected quit or restart of Windows, iTunes, or QuickTime
Good luck,
maz -
Hi gurus,
I'd like to know how to assign default values for user parameters in CRM web UI.
For instance I want that each time during navigation an editable field for sales organization is found, my default sales organization (maintained as paramenter in TX SU01) should be automatically filled out.
I tryed with CRM_SALES_ORG, HH_SALES_ORG, WAP_SALES_ORG, BBP_ORG but it does not work.
Any suggestions?
Thanks in advance.
Points for useful answers.
FabrizioHello,
I fear this is will be completely up to you.
The only means I can think of are:
1. Client Side: When the BSP is constructed use JS to fill the fields. However I can not imagine how one could possibly identify a sales org field on the UI?
2. Server Side: You could hook yourself into the API that is reading the data from the databases. Whenever a field is empty prefill it. This leads to serious problems as you do not know if the field is readonly on the UI.
Anyway, both ideas are just thoughts and there is absolutely no substance behind them. From my point of view it is simply not possible.
However I would be glad if you came up with a solution, this should be interesting.
cheers Carsten -
G5-Mirror Door Locks when not connected to Ethernet
G5-1.25mz Mirror Door, just got a new hard drive and a complete, start from basic clean install with 10.4.7 disc. When NOT connected to the ethernet (thru the appropriate Cat5 cable), the unit runs fine. BUT WHEN HOOKED UP TO THE ETHERNET, IT LOCKS UP ALMOST IMMEDIATELY.
What has died, where. No other unit in the studio is suffering from ethernet issues. We have tried hooking this unit up to alternate locations, and it still happens.hmm..that is interesting. so, you are saying the unit runs normally until you plug in a cat5 cable to the ethernet port?
well, that is not run of the mill at all.
if you have already tried different locations, different cables, different hubs, etc... then next is to assume it is the computer causing the issue.
you can reset your network settings to a default to see if that fixes it.
quickest way is to remove /library/preference/systemconfiguratin folder and then restart. ( this will reset your network settings completely
i would also try a PMU reset.
http://docs.info.apple.com/article.html?artnum=300341 -
Itunes for mac locks up after connecting device for sync
iTunes (11.2.2) locks up when I connect a device (iphone/ipad). I force quit the app and restarted to no avail. I have reinstalled the same version of iTunes, but the problem continues. Any ideas?
Steve BrownLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
Message 'USER LOCKED' when trying to give more line items in VA03
Hi All,
We have created a 'Z' smartform layout at delivery level and it has a 'Z' Output type.
When i am trying to enter more line items in va03 then it says user is locked .
Kindly give me suggestion whether this has a problem in the Layout OR else is some configurational problem.
Very Urgent.
Regards,
Rajesh Kumar.Rajesh,
its not a layout or print program problem at all.
i think you have implemented some EXIT for va* and it may be creating problem.
you have to see by debug from where this message comes from.
than you will come to know and rectify this.
Amit. -
RFC for User Lock and Unlock for child systems in CUA
Dear All,
Can anyone tell me, how to lock or unlock a user in child systems from CUA using a BAPI or RFC.
As per the requirement I can not use TCode SU01 for this purpose. I can only use RFC/BAPI for the same.
Thanks
Om
Edited by: Om Somesh on Apr 13, 2009 3:57 PMHi OM,
One way could be to use RFC_READ_TABLE in order to look at USR02.
The second method is by using SCUM transaction code
Regards
Krishna -
How do set the system parameter for user defaults?
When we are creating new users they are getting the European default for date format and decimal format. I have found is there is a structure BAPIDEFAUL that contains these values. However, I have not found the configuration for changing these values. Does anyone have the answer to this problem?
Ronald,
with USERS_GEN, users are created with BBP_USER_CREATECP.
This function uses DEFAULTS to pass parameters.
But those parameters are not available in interface or file upload
USERS_GEN will take default values in system parameters:
Set date format and decimal format like in system parameters
data: defaults type bapidefaul.
clear defaults.
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'zcsa/moddatfm'
ID 'VALUE' FIELD DEFAULTS-DATFM.
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'zcsa/moddcpfm'
ID 'VALUE' FIELD DEFAULTS-DCPFM.
So, this is the only way to "customize" it: define system parameters zcsa/moddatfm & zcsa/moddcpfm in RZ10.
Rgds
Christophe
Maybe you are looking for
-
I usually buy apps from my computer but i am unable to send these on icloud. I use a windows 7 64-bit I upgraded my itunes and got the icloud control panel but i am not able to stream my photos or apps to it Can someone help.
-
Cross-DOM API and/or Techniques for simple image manipulation
Am I correct in assuming that Cross-DOM API calls presume the target application is running? That is, these calls are not out to a "shared" library so to speak, but actually communication between two running apps. Assuming that is the case, is there
-
Aperture photo frame vs aperture photo box
Hi, Why I can change an photo box and not a photo frame, is photo frame different in printing from photo box?
-
CC doesn't recognize my updates
No matter how many times I download and install the app updates suggested by CC (Ps & Br), they will be there the next time I open CC. This has been going on for 3 months now. There is other users with the same problem, but their questions doesnt get
-
hi all i have this situation Sales Office will be given monthly sales Targets (The comparison should be made between the Actual sales & Target sales) Step 2: Targets will be given for specific material (Material Number & Quantity) Step3: System shoul