Parameter in Designer - Related to Authorisation

Hi Friends,
Can u please help with my request.
Lets say user has access to only one country Germany according to the roles assigned to him.
When user accessing some BW reports, in entry variable screen the country Germany is automatically filtered by the system and data in the report is filtered to Germany data.
When user accessing some other BW reports, in entry variable screen the country is not automatically filtered and BW system is trying to get data for all countries and Authorisation error is appeared without any data. In the same report if he give enters country in entry mask then he can see data for Germany.
The variable country is not compulsory variable in entry Mask.
<u><b>So, my question is:</b></u>
Where can we set this parameter in Designer or WAD in order to fill variables automatically in the entry mask according to the user role assignment while executing the reports.
Thanks..
Tony

Hi Tony,
We can use variables with the processing type of Authorisation at the time of query designing, which is used as a data source for the report. By doing so, when the user login with his credentials, then the report vl show him only the relevant data for which he was authorised.
Regards,
Rajkandula

Similar Messages

Suggestions- design related printer??

Hello
I was wondering if anyone 'out there' could help me?.. I have some design software like Photoshop and the Macromedia suite. My dilemma is, I have a ******** HP 'all in one' printer. This printer is definitely not made for design related projects. =P It seems every time I print out a .jpg within a document, the photo becomes seriously blurry.
Could anyone suggest a good printer that is compatible with an iMac G4 Flat Screen? Preferably a printer with high dpi output for design related projects, and one that isn't way expensive.. probably somewhere in the ballpark of $100 to $200.
Thank you in advance for any help. =) *april

Thank you for your help, Barbara. You know, I thought the same thing you did,.. that it was an image pixel problem, but I have tried every trick in the book, and the photos still come out blurry.
The pics are high resolution, digitals, and they are crystal clear on my screen. I spent hours in Photoshop trying to correct the photos. Still, I couldn't figure out what was wrong with them. After countless hours of 'correcting', I had to give up. I sent my project just as they were (blurry when printed on my printer) to a professional printer. I was SO worried about how they would turn out.. When I got the project back, I was amazed with how sharp and in focus those same photos were.
Talk about a relief; yet still more confusion. So, just to confirm that my printer was the problem, I printed my project out on a friend's printer. The photos were like 50% sharper than they were on mine. Since my printer is an 'all in one', I think the dpi wasn't priority #1 when they manufactured the unit.
To answer your other question, yes, I have used HP manufacturer paper as well as other high quality, photo grade paper to print this project. While the pics looked better, still, the quality was no where near acceptable.
Whew, that's a lot of words; hope your still awake. =)
Guess that's all I can think of right now; thank you again for your help. If anyone has any suggestions about a good, design related printer that is in my price range, please do respond as well. Thanks! *april

How to set Delete Rule to SET NULL while designing relational model .

Dear All,
Am new to SQL Developer Data Modeler and was doing some relational and logical design using Data modeler and i want to generate DDL script, while doing i was struck up with this issue.
I have two table and tried to give Primary key and Foreign key relationship, in foreign key table i want to set the Delete rule has SET NULL, but it is not found. I have other three options like CASCADE, RESTRICT,NO ACTION. Whereas in logical design i can find SET NULL, NO ACTION and RESTRICT....
But the DDL script is getting generated based on Relational design , i want to set foreign key has SET NULL in delete rule how to accomplish that?
Please help me......
Thanks in Advance
Ramkumar.S

Hi Ramkumar,
If you unset the Mandatory property on the Foreign Key, you should then be able to set the Delete Rule to SET NULL.
David

IPhone 4 reception issues are not design related! Proof inside this topic!

Hello,
I conducted some very strict tests to verify the reception bug some people are reporting.
*Test 1:* Holding the iPhone 4 at a specific and precise position with a plastic protection and the left hand covering the bottom left corner making sure both antenna parts are connected by my hand.
*Test 2:* Holding the iPhone 4 at a specific and precise position WITHOUT any plastic protection and the left hand covering the bottom left corner making sure both antenna parts are connected by my hand, making sure my left hand is perfectly dry.
*Test 3:* Holding the iPhone 4 at a specific and precise position WITHOUT any plastic protection and the left hand covering the bottom left corner making sure both antenna parts are connected by my hand, making sure my left hand is wet (wetting it before the test)
*Tests duration:* 2 full minutes.
Here are the results:
*Test 1:* Full reception (5 bars), EDGE data network working. Calls are working perfectly as well as data operations (Safari).
*Test 2:* Full reception (5 bars), EDGE data network working. Calls are working perfectly as well as data operations (Safari).
*Test 3*: Full reception (5 bars), EDGE data network working. Calls are working perfectly as well as data operations (Safari).
Geographic location: Paris (France), Bastille district, inside my apartment. Note that I don't get 3G on this location, wathever phone I use (Veryfied with HTC Magic, iPhone 3G and iPhone 4, it's all the same on this aspect).
*So same exact result for all three tests!*
*_So what does it mean?_*
It either means that not all iPhone 4 are affected by this issue (as mine is not affected), or that this issue is not simply related to how you hold your phone and does involve also other elements, like the phone baseband firmware not dealing well with some GSM network configurations (different frequencies...etc) when adding noise (which is what your hand do when holding the phone) or something else.
This could give credits to the AppleInsider theory that it's related to how the BaseBand firmware is dealing with some GSM network situations and so that it's software related and that a fix is coming soon (see: http://www.appleinsider.com/articles/10/06/25/deathgrip_hysteria_may_end_monday_with_ios_401.html).
But it can also mean that it's still purely hardware related and that it's a production fault that affects only some units but not all.
But it's clearly not a design fault, otherwise all units would be affected and so I would be able to reproduce it with mine, which is not the case (as demonstrated by the tests I conducted).
_*My advice to those who are affected:*_
1) Wait a week to see if a software fix get released (as apparently, according to AppleInsider, it may come this very monday as part of an iOS 4.0.1 update), or at least for a confirmation that it's not a software issue in some GSM network configurations.
2) If it's confirmed that it's a production issues on some units, then get your phone exchanged.

Well documented post.
After reading through all the reports I found myself intentionally holding the phone in the "Death-grip".
I went out that evening and used the phone perfectly fine all day, holding it with a few things, which is actually the way I hold it anyway when texting / msging etc.
I have a lot of faith that Apple with resolve this with a software update, and hope the fault is related to the BaseBand firmware reported in the appleinsider.
I am angered by everyone accepting the bloggers so-called "OFFICIAL RESPONSE" as Apples 'Official Response'.
There is no way, that Apple (Steve Jobs), would use that response via email, back to a single customer.
Officially... Apple will direct their response to the news directly, or at least something on their website.
People need to stop jumping on the "Steve Jobs told us to just hold it differently" band-wagon, and wait for something thats actually "OFFICIAL"...
As i've said in previous posts, just because the news and this blogger has put the word "Official" next to it, does not make it so...
Rant over...

Need help and advice on designing relations of classes

I tried to use JInternalFrame which contains an extension of JPanel as the UI content (with actionListener for the buttons inside it). The Panel is contained in a JScrollPane.
jIntFrm = new JInternalFrame("-Title-", true, true, true, true);
jIntFrm.setLayout(FlowLayout());
jIntFrm.add(new JScrollPane(new PnlEntry()));
The user clicked the button inside the panel (PnlEntry) to close the JInternalFrame containing this panel or another button to do operations that will need to display another JInternalFrame containing another extension of JPanel.
Please give me advices on how these should be done, so that it makes good OO relations.
Right now, I'mdoing it like this:
public class mainFrame extends JFrame{
JInternalFrame jIntFrm; //AND OTHER INTERNAL FRAME
jIntFrm = new JInternalFrame("-Title-", true, true, true, true);
jIntFrm.setLayout(FlowLayout());
//THE PANEL IS GIVEN THE REF AND MEMORIZE IT UNTIL IT
//INVOKES mainFrame.panelExit(JInternalFrame)
jIntFrm.add(new JScrollPane(new PnlEntry(this, jIntFrm)));
panelExit(JInternalFrame jif){
if(jif == jIntFrm){
jIntFrame.dispose();
jIntFrame = null;
panelContinueProcess(JInternalFrame jif, Object someID){
if(jif == jIntFrm){
jIntFrame.dispose();
jIntFrame = null;
//start displaying another JInternalFrame with the appropriate Panel in it
Is this all is OK?
Please give me your advice
Thx,
David

Maybe read on MVC (Model-View-Controller) pattern? It's practically the standard for Swing applications (even Swing itself follows the pattern).
You don't want to clutter your frame with behavioral code.

Forum for graphic design related questions?

Does anyone know of any good graphic design discussion forums? I'm looking for a place to ask questions about typography, color, layout, etc.
Thanks in advance.

Not as much activity on soem of these, btu here are some good ones
http://typophile.com/
http://www.underconsideration.com/brandnew/
http://www.howdesign.com/forum/

Designing relational database from flat file

hi all,
I have little background in the filed of databases. As my work task I have to design a realtional databse from a flat file with 60 fields. would you please guide me how to or, the documents that i can refer to develop a good and efficient design.? I would appreciate your help and would love to work and read and learn to any level to get it right.have a good day

user501335 wrote:
Thank you very much Gerwin and Edstvens for your replies. I guess I must have elaborated a little more.
Gerwin, I have gone throught the link you have sent me, and it was good to know that I am already aware of till this level.. Thank you for the help, can you please suggest little more so that i can go a little advance. we would be developing it for sql server2008.
edstevens, So kind of you to send me a good suggestion.I will keep in mind while working on it.Would you please like to suggest me something more?
No.
If people would just get Third Normal Form burned into their brains, a lot of other problems would go away.
wish you both a good day

Network Design related

Hi there.
I have a question regarding when would be the appropriate design scenario to move from fixed stackable switches to modular chassis swithes.
Is it technology depended or a specific cut off point (users) that you would move away from fixed config stackable switches?
e.g particular amount of users? Other technologies such as wireless, collaboration to also be included?
Thanks

Hi there.
I have a question regarding when would be the appropriate design scenario to move from fixed stackable switches to modular chassis swithes.
Is it technology depended or a specific cut off point (users) that you would move away from fixed config stackable switches?
e.g particular amount of users? Other technologies such as wireless, collaboration to also be included?
Thanks

Absolute beginner: shirt design related questions

hi all. i thought i'd be as detailed as possible to give you an idea of what my questions are:
i have some hand-drawn art/design for a t-shirt. so i took some pictures, and my daughter opened them up in photoshop elements 6. she was able to easily trace over my pencil lines, BUT the lines were not smooth at all. say i drew a circle. it is not so much that it is not a perfect circle, especially if free-handed, but that the edges of the line of that circle are not smooth.
turns out elements can't do that, after i called adobe. they suggested illustrator, which i am currently demo'ing. when i had my daughter (she's 17, been playing with elements rather well) try to do it illustrator, it wasn't as intuitive as both of us thought. it's gotten her stumped.
for the most part, that's all i want to do. pull up a picture of a hand-drawn sketch, and draw it in illustrator with some smooth lines. i would very much appreciate some guidance on what to do!
stumped!
THANKS IN ADVANCE.
jack

Jack,
When you start from scratch in this kind of program, you just have to read the instructions. Otherwise, you'll be floundering about forever being confused. Vector drawing programs like Illustrator are not immediately intuitive to someone who is accustomed only to working in raster image programs (i.e.; Photoshop, etc.).
Vector graphics is the "other half" of the computer graphics world. In a program like Illustrator, you're not recoloring pixels; you're creating and manipulating objects, most of which are mathematically-defined shapes called paths. You draw paths, give them strokes and/or fills, move them about, stack them, scale them, arrange them so that together they comprise a piece of artwork.
Go to the help files, start at the beginning, read through it like a book, perform the operations described. You'll then get the conceptual principles down and start using the thing with much less frustration. It will take time. This isn't the kind of graphics program you just dive into blind, have someone tell you a few command sequences, and start doing productive work in. You have to read the instructions.
JET

How to disabled the input parameter dialog box in crystal reports 9

Post Author: Murtaza
CA Forum: General
Hi friends,I have got stuck with a weird problem. In my
crystal report, I have set up some input parameters. I am setting
values for these parameters somewhere inside code. But I don't
want to show the default input parameter dialog box. Under any case,
user should not see the ugly parameter dialog box that crystal
presents. Please suggest me how I can achieve
this. I cannot do this through code, because our environment does
not allow that. I have to do this in crystal reports viewer and
by setting some property of the crystal report object. But everything
must be done on UI, not through code. So, the solution should not be the following.
// step before step 1
// **** the line needs to refer to the report and be set before setting
ReportSource in the viewer to myReport
myReport.EnableParameterPrompting = False
Any help would be greatly appreciated. Murtaza

Post Author: sleahcim
CA Forum: General
Hi Murtaza,
Unfortunately, I am not aware of any method to suppress the prompt for the input parameters, but still use them. It is truly a design-related issue for the report. The reason that the prompt appears is because the parameter it is prompting for is used in the report; in particular either the Group or Record Selection, or referenced in another formula.
The only way I can think of to not show the prompt, is to not use the parameter in the report. You did mention that you are setting the value of the parameter inside of the report -- are you doing this through using a formula? Perhaps you can just remove the parameter and only use the formula that you are setting the default values with.
-Michael

Modify default value for static parameter field programmatically

Hi,
I have my Crystal Reports stored in a BO Enterprise system. I have written a java programm that scans the repository, loads the CR reports one by one into a ReportClientDocument, modifies the data source and then stores the updated report back to repository (it overwrites the existing objects).
I was even able to modify the default values for the parameters, which are used for scheduling of each report.
But what I am trying to do know is to overwrite the default value used when invoking the report interactively. This should be the value found under the Default Value field, when the Properties window of the parameter is opened in the CR designer.
This is what I have tried so far:
Option 1: First I tried to set the default values using com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDataDefinition().getParameterFieldController().getField(...).getDefaultValues() . The only thing I have managed to do using this approach is to modify the static LOVs that are associated to static parameters. The actual selected value (shown under Default Value in the Properties window for the given parameter field) remained unchanged, when invoking the report in the InfoView or opening it in the CR designer.
Option 2: I have used com.crystaldecisions.sdk.plugin.desktop.report.IReport.getReportParameters().get(ik).getDefaultValues() to change the default values. I was able to see my changes in the BO repository (using a query on CI_INFOOBJECTS), still the changes did not really have an impact to what is displayed as default value when invoking the report in the InfoView.
Any help will be appreciated.
It would be great to know if someone of you has already implemented successfully such a use-case.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Dec 9, 2009 8:52 AM
Edited by: Efstratios Karaivazoglou on Dec 15, 2009 11:33 PM

Hi,
For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
- Bhushan

Authorisation issue regarding BEX Broadcaster

Hi all
Does anyone know why I maybe getting an authorisation issue attempting to broadcast a pdf report via the Bex broadcast tool?
The recipient user has all the relevant authorisations and roles attached, and when this report is previewed in Bex Report Designer, the report runs fine showing all the data for the report, However when the report is scheduled via the Bex broadcaster, the broadcast fails. RSRD_LOG shows the following message
Java communication error: RFC destination NOT_CONFIGURED does not exist.
Message no. RSBOLAP017
And in T-code sm21, I get the following error
X MESSAGE BRAIN 299: SAPLRSEC_CHECKS
RSEC_GET_AUTH_HIER_FOR_USER:NOHIE
This indicates that there is an authorisation error with my user, however as mentioned earlier all the authorisation objects and roles seem correct as the report runs fine as I can preview in bex report designer with no authorisation problems at all.
I have also executed the report in T-code RSECADMIN this also shows no errors in the error log and the report runs fine here too.
Please can anyone advise?
Thanks
Forhad

Hi Forhad,
I'm not sure if the error is related to the communication between the Java and the BW or if it's a problem with the authorization.
Are you using a customer exit or an authorization variable in your query/bookmark?
Check if by chance your query have an hirarchy assigned to a characteristic, then, check the user's authorization and check whether you have enough authorization for the hierarchy.
I'm unsure, but maybe note 916090 can help you.
I hope it helps.
Regards,
Daniel

Livecycle Designer 7.0 - How do I link a text box in a form to a radio button or checkbox?

Hello,
I am using Livecycle Designer 7.0 to create a form. I have a scenario where I have several options on a question where they choose one radio button. The last option of the radio button has a text box accompanying it and I only want it to be able to be filled out/typed into if that particular radio button is chosen. Not to be able to be typed into if that particular radio button is not chosen as an answer to that question.
How do I do that?
Also how to I do the same for a text box to be entered into and typed into only if the accompanying checkbox is checked?
Help?

This forum is for the Adobe FormsCentral (formscentral.adobe.com) which is a service that allows you to create, collect and analyze data using an online web form. You should ask Designer related form questions in the Designer forums: http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_des igner_es
I'll move your post to that forum so you don't need to retype it. They can help you out...
Randy

Authorisation in Business Objects Explorer Infospaces created on BEx query

Hello,
We have installed Business Objects Explorer, created Universe on BEx query and created a Explorer Infospace on that universe. everything works fine but the authorisations created for the user in BEx query are not taken into consideration when I login using SAP username "leveraging" SSO.
Is Explorer not designed to consider authorisations in BEX query?
Whats happening during Indexing of an Infospace? Will the system save the data in Business Objects repository from the source of the data?
Thanks in advance.
/Suman

Hi Suman,
You are right , Explorer is not designed to leverage Authorisations in SAP BW.
Polestar is indexing data and keeping it out side of BW. Although you can log in with SSO , it doesn't check the authorization according to BW, it shows everything indexed.
You can have a workaround if the case is simple such as;
Suppose you have 3 region , you can create 3 infospaces and give these authorizations to users from CMC.
But if you really want to use all features of authorization in BW , it is impossible for now.
Regards,
Ozan Eroglu

How to set no_value to Optional parameter in XI 3.0 by OpenDoc URL linking

I found in "BusinessObjects XI 3.0 Viewing reports and documents using URLs Howto.doc"
"You can remove an optional parameter from the prompt by setting it to no_value in the OpenDocument query string."
I tested: response.sendRedirect("/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=AaVxpKuKNBxKnHUJCqwuRi0&lsSCountry=""no_value""&token=" + logonToken);
But it will filter no data, because no country call "no_value". I still need to delete the value, and click Apply, to get all data.
I wonder how to achieve optional parameter via opendocument linking, to get a report with "full data set".
Any one can help?
Thanks in advance!
Jennie

Hi Jennie,
I'm wondering if "1203675 - Cannot specify an empty string for an optional string parameter through the refresh prompts page which displays "no value" unlike the parameter panel" is related to this.
Instead of using no value or empty string, how about if you use ALL value for the parameter to bring full data? Check "1218621 - Option "All" in list of values for a dynamic prompt in XI"
Hitomi

Parameter in Designer - Related to Authorisation

Similar Messages

Maybe you are looking for