Parameter in HTTP receiver adapter

Hey
My requirements are:
I am sending an XML to an external system. Documentation says: "XML should be in a parameter in your request called 'xmlInput'".
How do I actually put my XML in this parameter? Does this have anything to do with the URL Parameters in comm channel configuration?
I have configured a client proxy, http receiver adapter and a communication channel in sm59 and they work OK, but it seems as I don't send the XML in this parameter.
Appreciate your help!
regards Ole

Hey!
Thanks for your answers.
Nana, are you sure of this, that java proxy is the only way I can put the XML in a parameter? I only need to confirm this because there is no place in their documentation that this is stated explicitly, I have only been told this via their technical person...:)
I agree that this is a limitation of the receiving system, and I know that this system is not up to date as I can tell from what they are saying and their documentation.
regards Ole

Similar Messages

HTTPS Receiver Adapter POST with FILE TYPE parameter

Hello,
I need to do a POST to a URL service that validates content of a file. It receives user and password as string parameters and a FILE as a mime type parameter.
I'll appreciate any help.
Regards,
Diego.

Hi.
Using Http Receiver Adapter , you can try out this.
This blog may give some idea-
/people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
Otherwise, try out with callinng this service via SOAP Adapter i.e webservice.
Rgds,
moorthy

Manipulate the URL in HTTP receiver adapter possible?

hello together,
i have an HTTP receiver adapter. To the parameters which i can tick in XI as default (sender party, sender service, ....) i want to add some parameters too.
who can i do that? i have read the weblog from william li. i tried to change the parameter link the comments at the end of the blog (see kurt rasmussen) but nothing happend..... the parameters are not available....
can somebody help me?
thanks a lot
alex

hello michal,
yes, i did. i took the information from http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm and tried to put some special information to URL. nothing to see.
is it mandatory to use a mapping to fill the URL parameter fields, isn't it??
i am using a port sniffer to see the URL and the fields (parameters) in it.
thanks a lot.
alex

How to set HTTP header field "cookie" with http receiver adapter?

Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,

I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards,

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

HTTP Receiver Adapter. Pls advice

Hi All,
I have response from System A already present in XI.
I need to send the response from System Aa present in XI to other System B through HTTP Receiver adapter in synchronous manner means that System B should send response back to XI.
Can HTTP Receiver adapter be used for Sync Communication in my scenario.
Please send blogs/link for it
Regards

Hi Henry,
Refer the below links:
http://help.sap.com/saphelp_nw04s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
Re: HTTP Sender - how to read URL Parameter USER id into Mapping
/people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
http://help.sap.com/saphelp_nw04/helpdata/en/82/f4993c03e0cd37e10000000a11405a/frameset.htm
http://sap-ag.com:8088/sap/xi/adapter_plain?service=sender&namespace=urn%3Asap-ag%2Ecom&interface=%2Fsap%2Forders
http://sap-ag.com:8088/sap/xi/adapter_plain?service=sender&namespace=urn%3Asap-ag%2Ecom&interface=%2Fsap%2Forders&qos=EO&msgguid=3C61F6C12F1E2DD1E10000000A1145AB
Thanks,
Satya Kumar
Reward points if it is useful..
Edited by: SATYA KUMAR AKKARABOYANA on Apr 15, 2008 10:26 AM

HTTP receiver adapter: dynamic configuration

I was told that if I have a URL and some parameters, I can use a sync HTTP receiver adapter to call a site.
I know this can be done using some kind of dynamic configuration, but I am not familiar with this adapter.
The most important question here is that I need to know if this can be done throw PI, so my question is:
Is there a parameter limit in the HTTP adapter? If so, what is the quantity of parameters that I can give to the adapter?

for the ASMA parameters you can use for the HTTP receiver adapter check
Configuring the Receiver Plain HTTP Adapter - http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

Paramter setting in URL in the case of HTTP receiver adapter

I have the following requirment: Can you anyone please help me how to define DATATYPE and configure in HTTP adapter:
The web page is developed in JSP page its body contains parameter(for example:<textarea name="xml" cols="70" rows="150" wrap="off">) to pass to the URL.
In this suitation,1) how can define my datatype in XI repository. ,Root element should be start with "xml" tag? 2). what are configuration parameters in HTTP receiver adapter.
3). Using HTTP post application.
Your response is highly appreciated.
Thanks
Venkat

I have the following requirment: Can you anyone please help me how to define DATATYPE and configure in HTTP adapter:
The web page is developed in JSP page its body contains parameter(for example:<textarea name="xml" cols="70" rows="150" wrap="off">) to pass to the URL.
In this suitation,1) how can define my datatype in XI repository. ,Root element should be start with "xml" tag? 2). what are configuration parameters in HTTP receiver adapter.
3). Using HTTP post application.
Your response is highly appreciated.
Thanks
Venkat

HTTPS communication using HTTP receiver adapter URL address as Address Type

Hi All,
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
Note : Address type is a parameter in HTTP adapter setup .
Regards,
Reddy

Hi,
Check this,
Configurations in Integration Directory
The plain HTTP adapter gives the receiver system the following specifications:
 Specifications for addressing using a URL address:
Target host, service number, and path prefix including query string:
http://<hostname:port>/<path>?<query-string>
You can identify the target host (HTTP port) of a SAP Web Application Server using
the
ICM monitor
Host and port of the HTTP proxy (optional if there is a firewall between the plain
HTTP adapter and the receiver system)
Authentication data for the receiver system.
See also: transaction Display and Maintain RFC Destinations (SM59).
 Specifications for addressing using an HTTP destination:
HTTP destination
 Parameters from the communication channel for technical routing
Content type (the entry text/XML is expected as default)
Specifies the format that the message contents (the payload) should have.
Optional header fields for the receiver-specific protocol
Attributes for the query string
1. Sender party
2. Sender service
3. Receiver Interface
4. Message ID
5. Quality of service
6. Queue ID
All attributes are selected except for the queue ID. If you do not want a value to be
transferred to the receiver, deselect it. The queue ID is only required if the quality of
service is EOIO.
Specifications for payload manipulation
XML code (default UFT-8)
Specifies the character set.
URL escaping
Presents the XML in a URL-enabled format. Special characters that could be
interpreted as control characters are replaced with escape characters (masked).
Prolog
Enhances the payload for particular servers (optional, see below).
Epilog
Enhances the payload for particular servers (optional, see below).
Enhancing the Payload
Regards
Seshagiri

Hi,about http receiver adapter.

i use http receiver adapter.
the message was sent from send to receiver via http adatper of integratio engine.
but how should i get payload of message?
i can not get the payload data in receiver application.
i set prolog as "&loaderXML=".
and then the parameter name of payload is "loaderXML"
but i can not get the parameter name "loaderXML" from http reques

Tcode - Sxmb_moni go to , Double click the message - HTTP receiver one, Right side --go to - Request Message Mapping ..go for the pay load content,
HI.
there are not "Request Messge Mapping" entry in right side.

HTTP Receiver Adapter - delete ?xml version="1.0" encoding="UTF-8"?

Hi,
Is it possible to delete the part below when sending an HTTP request through HTTP receiver adapter without any java/abap/xslt mapping?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Thanks
Arman

Hi,
<?xml version="1.0" encoding="UTF-8"?>
Specifies that the given message is xml
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Specifies its a MessageType of the payload, without this that message is not identifies and is not processed. Its manditory to have these. Other wise error will raise.
Regards,
Prasanna

HTTP Receiver Adapter

Hi,
I am working on a scenario, where I am posting xml message on https url, for which I am using HTTP receiver adapter.
I have created RFC destination of type 'G' in sm59 to make an https call, where I have provided following details:
In Technical Settings:
Target Host - <Hostname>
Service No. - 443
Path Prefix - <url path>
Logon Security:
SSL - Active
SSL Client Certificate - Default SSL Client (Standard)
UserName - <Username>
Password - <Password>
I have used this RFC destination in 'HTTP Destination' of HTTP receiver adapter.
When I test this interface, I am getting this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Can you please help me resolve this issue. Please let me know, if I am following the right steps.
Thanks in advance
Regards,
Amit

Hi -
Since you're using the http destination option in the channel, you just specify the user/pwd in the destination.
Regarding the issue, first, for the Logon/Security option in the destination, unless you'll be using a client certificate to authenticate, you should choose option ANONYM SSL Client (Anonymous) - you still provide the user/pwd in the Logon section. Make sure you have imported the root cert of the CA verifying the server's identity into the client certificate list within STRUST (node SSL Client (Anonymous)).
Also, for some hints on the issue, look at the ICM trace - tcode SMICM->Goto->Trace File... you may need to increase the trace level - SMICM->Goto->Trace Level... After resolving the issue, make sure to set the trace level back to default.
Regards,
Jin

HTTP receiver Adapter configuration

Hi All,
I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service)
The receiver has Oracle gateway and it expects message in following format.
HTTP Header
 HttpVersion: HTTP/1.1
 Authorization: Digest username=myusername,
 realm=[email protected],
 nonce=dcd98b7102dd2f0e8b11d0f600bfb0c093,
 uri=/dir/index.html,
 qop=auth,
 nc=00000001,
 cnonce=0a4f113b,
 response=6629fae49393a05397450978507c4ef1,
 opaque=5ccc069c403ebaf9f0171e9517f40e41
 Contentlength: 12345
 Contenttype: text/html
HTTP Body
 TRANSPORT_PROTOCOL=OXTA
 TRANSPORT_PROTOCOL_VERSION=1.0
 REQUEST_TYPE=SEND
 MESSAGE_ID=A1234567890ZZ0987654321
 MESSAGE_TYPE=XML
 MESSAGE_STANDARD=OAG
 TRANSACTION_TYPE=PO
 TRANSACTION_SUBTYPE=PROCESS
 DOCUMENT_NUMBER=12345
 PARTYID=9999
 PARTY_SITE_ID=8888
 PROTOCOL_TYPE=HTTPSOXTA
 PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
 transportAgentServer
 USERNAME=myusername
 PASSWORD=myloginpassword
 ATTRIBUTE1=
 ATTRIBUTE2=
 ATTRIBUTE3=
 ATTRIBUTE4=
 ATTRIBUTE5=
 PAYLOAD=<xml ... ...>
I think this is not a typical HTTP URL type of format, is it?
And I am not sure how I can build the message. Where do I put the parameters like TRANSPORT_PROTOCOL, TRANSPORT_PROTOCOL_VERSION, REQUEST_TYPE etc in the HTTP adapter?
Also is there any place where I can see the final actual XI message that is sent to HTTP service?
Any help will be really appreciated.
Thanks and regards,
Rahul.

Hi Rajeev,
The receiver system should have the details about the content type it expects. I got that from the team who monitors our receiver system.
The HTTP Body of HTTP adapter is made up of PrologPayloadEpilog.
So I added the paramter list that receiver system expects as part of the Prolog. Refer to the HTTP body that I have posted in my earlier message. Out of that till ".....Payload=" is added to Prolog and XI then appends actual payload to it.
To be precise -
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&MESSAGE_TYPE=XML&MESSAGE_STANDARD=UNIVERSAL&TRANSACTION_TYPE=XXXE&TRANSACTION_SUBTYPE=ORDER_I&DOCUMENT_NUMBER=PO12345&PARTY_SITE_ID=ESAP_ORDER_I&USERNAME=***&PASSWORD=**&PAYLOAD=
So in the end it worked out well.
Cheers,
Rahul.

Remove namespace alias for HTTP receiver adapter

hello all,
I have a scenario, IDOC->XML (HTTPS). Standard output of PI has ns0: as prefix for each xml tag (ns0 alias for namespace)
I want to remove the namespace alias while preserving the namespace in the output. So removing namespace reference in external definition is not a option.
Is there any way to use XMLAnonymizerBean for HTTP receiver adapter? What are other alternatives (java mapping)?
Thanks,
sachin

Thanks stefan, prateek.
Prateek: I checked this blog earlier. It talks about inbound processing. My scenario is outbound HTTP and I am not sure how I can use specific adapter service as mentioned in blog in outbound case as other scenarios are using standards adapter_plain service.
Stefan: I will try this approach.
regards,
sachin

Parameter in HTTP receiver adapter

Similar Messages

Maybe you are looking for