Parameter readings entry on day to to day basis in EHS -reg

Hi,
Requirement is to enter the parameter readings which are taken at ETP -effluent treatment plants in to SAP -EHS module
Parameters which affect the environment like TDS, Caco3 %, Mgco3% in the effluent before treatment and after treatment etc.. are measured on day to day basis and to be entered in SAP to track , analyse and for other MIS reports
parameter readings are taken at different locations like effluent treatment plants, solvent  treatment plants , paint shops etc...
is there any provision in SAP-EHS module for this ?
please suggest
regards,
Madhu Kiran

Hello Madhu / Pavan,
This is what I can say
1)Requirement is to enter the parameter readings which are taken at ETP -effluent treatment plants in to SAP -EHS module Using Environmental Compliance Material Management option, you can create Input and Output characteristics
Using Task Management  - You can trigger tasks for ETP Analyst to mannually feed the data into analysis. Day today analysis data can be easily stored. 
2) Parameters which affect the environment like TDS, Caco3 %, Mgco3% in the effluent before treatment and after treatment etc.. are measured on day to day basis and to be entered in SAP to track , analyse and for other MIS reports
Effluent parameters like pH, TDS, VOC, BOD, Alkalinity u2013 before and after treatment is carried out to assess the treatment, check against CPCB / SPCB requirements, identifying deviations if any, and propose tasks to correct the error and prepare regulatory or Exception reports. In EC it is possible to set up.
3) Parameter readings are taken at different locations like effluent treatment plants, solvent treatment plants , paint shops etc.
In Environmental Compliance u2013 we define Facility Structure replicating the facility and its sub structures, processes, activities, control devices etc. It is possible to capture data at each location and store them for assessment or analysis. 
4)The solution Jaya has proposed may hold true for the parameters being captured with "online analyzers" (JayaKumar, Please correct me if I am wrong). With SAP EC solution, you can directly integrate your field's real time sensors with data historians.
No Pavan, Environmental Compliance can also capture manuall entries. 
SAP EH&S Measurement Project u2013 it is basically for Workarea / Risk Assessment. There is difference between Measurement Management and Compliance / Permit Management. If you are capturing the data for Permit or Compliance perspective and to generate Regulatory reporting  against set Permit values (Wastewater  Water Quality / Air Quality Standards), then Environmental Compliance is the best pick.
Thanks
Jayakumar

Similar Messages

  • Could it possible to post Recurring Journal entry every day?

    Hi Experts
    Could it possible to post Recurring Journal entry every day?
    Please provide the configuration steps.
    Note: Defined Document type and number range,
    In FBD1 , when I try post the entry, showing only monthly intervals.
    Thanks in advance
    Srinath

    Hi Srinat,
    Please try with Run Date and Run Schedule, T.code OBC1 and OBC2:
    Run Schedule for Recurring Entries
    Plan which contains the required run dates for recurring entry original  documents. Using the run schedule, accounting documents can be created from recurring entry original documents at any intervals.
    Procedure
    Specify the run schedule by which the recurring entry original document is to be carried out. Alternatively, you can specify the run by specifying an interval in months and a run day.
    If you use a run schedule, you must have defined this previously in the  Financial Accounting configuration. In addition, make sure that the recurring  entry program is carried out as often as appropriate and with the suitable  parameters. For a run schedule with weekly dates, for example, the recurring entry program must also be started weekly.
    Regards
    Javed

  • My ipad calendar shows most entries a day later.

    My ipad calendar shows most entries a day later. I am using mobile me with my macs and iPhone with no problems. However the iPad shows most entries a day later then all the other dates. Anyone know how to solve the problem.

    Not sure if you have tried it, but the stuff in this kb would be a starting point.
    http://support.apple.com/kb/TS1638
    Here is another potentially helpful article
    http://support.apple.com/kb/HT4576

  • Is there a way we can open/close posting periods on a "per day" basis?

    Hi SAP gurus,
    Is there a way we can open/close posting periods on a per day basis?
    It is not possible in OB52 since it only has control per period and not per day.
    Will assign points for suggestions. =) Thanks!

    Hii
    In standard SAP there is not such functionality where u can do these kind of configuration...it is at least for a month that is through OB52.
    If u still wants this functionality it is through the validation.
    u need to create the validation for that company code and thn u can use this functionality....
    hope it helps u
    reward points if helpful
    sejal singh

  • Credit block for Slaes Order on Days Basis

    Hi SAP Gurus,
    As my client requirement want Credit block for sales order with days basis.For  example Customer has  credit 5000 and  30 days.Even credit value not exceed on 31st day, But sales order has  to block .
    Please requesting to all kindly needful for me.

    Hi
    Check payment terms in Customer master data, billing tab page. We can define payment terms. And if you want to block the customer use dynamic credit check.
    Enter 5,000/- in maximum document value in FD32
    For Credit management to be working
    1. In def of SD type we need to speciy Automatic credit control in the field " Check Credit Limit"
    2. In the defination of corresponding item category we have to check the field "Credit Active".
    Award points if it is useful
    Anil

  • Date Calculations on 360 days basis (30 days a month)

    Does any body know how to get
    difference between 2 dates on 360 days basis i.e 30 Days a month

    Please ignore the previous post.
    cal.set(DAY_OF_YEAR,360);
    is used the set the current day of the year to 360, not the total number of days in year. The same goes with
    cal.set(DAY_OF_MONTH,30);
    which sets the current day of the month to 30.

  • Time capsule? Firstly I want to know if you can update your back-ups on a day-to-day basis? And is it possible to update another/different MacBook everyday from that same back-up?

    The situation is my parents have a business and each have a MacBook, they want a system where they share files with each other. BUT they want it to be done automatically on a day to day basis. For example if my dad creates a quotation for a client of his, and my mom wants to come home with the laptop to work on this file. What must happen is that before my dad leaves, he backs up his MacBook to the Time Capsule (only the new files get updated) and then my mom will then click a button and it will update the new files that my dad has backed up to the Time Capsule. BUT it should also work the other way around.
    So in short they want a system where whatever new files they create on their MacBook will be saved on the other MacBook simultaneously.
    They do not want to create a central server where they manually have to go and save and fetch new files, they want it to be automatic. They want to in layman's terms, work on one pc image with two actual computers.
    Is this even possible?? I would really appreciate it if someone could help me in this matter before my dad goes and spends a lot of money on something that might not even be feasible.
    Kind Regards
    Mark

    I understand what you want.. but it is the wrong way to do it.
    You will get into a mess with using TM this way. It is designed for backup of individual machines.. you are trying to use it for a file server.
    They do not want to create a central server where they manually have to go and save and fetch new files, they want it to be automatic.
    The ironic thing is you are trying to use Time Machine as a central server.. only it is not.
    A central server is exactly the right way to do it. But it can be done automatically.. you just use some synchonisation software. (Central server means you all work on the same files and you have centralised backup)
    http://mac-sync-software-review.toptenreviews.com/
    Using some cloud method would be the other suggestion.. but I am not sure exactly how to do it. I have lousy internet so cloud is really too hard to use for storage.. but Apple do lots of stuff to help people with cloud to synchronize fies.

  • Day basis depreciation

    Dear All,
    I am  working with FI-AA module and facing the below problem kindly give me the solutions.......
    My configuration is as follows:-
    1.Fiscal year variant in FI is M3 - which contains 366 day (29 days in Feb) .
    2.Fiscal year variant in Asset accounting is P3 which contains 365 days (28 days in FEB).
    my real problem is system is calculating depreciation for 366 days but my client wants to calculate it for 365 days?
    kindly suggest me to resolve ....
    yours
    ummi.

    Dear Barnhard,
    yes I  do have day basis depreciation...... let me give you more clarity on my issue.
    1. Fiscal year Variant in FI is M3 (366 days 29 days in FEB ). which is created and assigned initially.
    2. Fiscal year Variant in AA P3 (365 days 28 days in FEB ). Which is created for AA Roll out.
    Depreciation calculation as per system.
    According to case :- APC       USEFULL          Depn on MTD for Apirl.
                                      36000     3 (366366366)         =36000/1098  is  983.6065574
    but i want it to  be calculated  as per  case 2. as follows:-
                                      36000                          3(365365365)                                  =36000/1095 is    986.3013699
    kindly suggest me to resolve this ?
    Regards,
    umesha.
    Edited by: ummigowda on Jun 1, 2011 1:12 PM

  • Mac having issue opening certain files on a day to day basis

    My Mac seems to have problems opening files on a day to day basis.  One day it will not open JPEG files saying Mac does not support file format and then the next day it will open JPEG files but then have an issue opening PDF files or MS Word files.  Sometimes I am able to reboot and the issue is resovled other times even with a reboot I still run into an issue with opening a certain file format.  I Verified Permissons with a few errors that got repaied but I'm still having this issue.

    I understand what you want.. but it is the wrong way to do it.
    You will get into a mess with using TM this way. It is designed for backup of individual machines.. you are trying to use it for a file server.
    They do not want to create a central server where they manually have to go and save and fetch new files, they want it to be automatic.
    The ironic thing is you are trying to use Time Machine as a central server.. only it is not.
    A central server is exactly the right way to do it. But it can be done automatically.. you just use some synchonisation software. (Central server means you all work on the same files and you have centralised backup)
    http://mac-sync-software-review.toptenreviews.com/
    Using some cloud method would be the other suggestion.. but I am not sure exactly how to do it. I have lousy internet so cloud is really too hard to use for storage.. but Apple do lots of stuff to help people with cloud to synchronize fies.

  • Calculate shipment cost on day basis

    hi,
    how can i calculate the shipmentment cost on day basis.For this which condition type should be used in my shipment pricing procedure.

    hello, friend.
    to be honest, i have not tried that but i think it is possible.  you can go to IMG > Log Ex > Transportation > Shipment Cost > Pricing > Pricing control.  look into a condition type, go to 'Scales' and you will find 'scale basis' (value 'O' - time period scale in days) and 'unit of measure' (days).
    i guess you also need ABAP enhancement to calculate the number of days between planning and shipment completion to calculate costs in days.
    regards.

  • Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.    I prefer to view in All contacts on a double page spread with details on the right page.  Searching doesn't seem to work correctly i

    Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts. 
    I prefer to view in All contacts on a double page spread with details on the right page.  Searching doesn't seem to work correctly in this view.
    It's always the second search that is problematic.
    I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
    I've tried to use the x to clear the previous entry and then type the next search, same problem.  The only way seems to be to move from "All Contacts" to "Groups".  Then the searched name appears and I can return to All Contacts to see full details.
    Surely three key press' are not the way it's supposed to work?
    FYI
    Processor  2.7 GHz Intel Core i7
    Memory  8 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 512 MB
    Software  Mac OS X Lion 10.7.3 (11D50d)
    Address book Version 6.1 (1083)
    MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7

    AddressBook experts are here:
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

  • E51 Shift Calendar Entries One Day

    Hi,
    I have E51 with latest software- 200.34.36. I found that all the calendar entries was shifted one day.
    Whats the reason behind that? and how to solve it?
    Thanks in advanced.
    Yazeed

    I just deleted the entire Google-account from the Pre calendar and re-added it. It seems that all events show up correctly now

  • Add recurring entries for days of the week

    Hello,
    I'm trying to setup a daily schedule for my dog walking business. I'd like to have each dog's name automaticaly listed under the day of the week which they are to walk on.
    For example: "Scarlett" walks on Tuesdays, Wednesdays, and Fridays.
    If B1 says "Tuesday" can I have one of the cells in that column automatically read "Scarlett" each week?
    I'd like to have it so that all I have to do is put Tuesday up at the top and it automatically creates a list of my Tuesday dogs for me, Lulu, Scarlett, Mark, Dani, Zoe, Sharky, etc.

    Ah, those famous words, "All I have to do..."
    Here's a partial solution. Unfortunately, it doesn't cover the "all I have to do" part. More about that in the description. Click the image for a larger version.
    Table 1 (Data) is the table on which the name of each dog is entered (column A) and the days that dog is to be walked recorded using check box cells.
    Table 2 (Index) creates a set of lookup tables from the information recoded on Data. Each table contains a column for the day listing a serial number to represent each dog scheduled to be walked that day and the column containing the names of the dogs, plus any intervening columns. The list of dogs has bee moved to the right as I was considering using VLOOKUP, which requires the search values to be listed to the left of the result values.
    Tables 3 through 9 are the daily lists. These were created as a single seven-column table, then split into separate single column tables for each day.
    Formulas:
    Data: No formulas on this table.
    Index:
    A2: =IF(Data::B,MAX(A$1:A1)+1,"")
    Fill down to row 10, then select A2:A11 and fill right to column G.
    H2: =Data::A
    H2 (enhanced): =IF(LEN(Data::A)>0,Data::A,"")
    Fill down to H11
    (Enhanced version prevents showing a zero on rows where no dog's name has been entered on Data.)
    Days:
    Make a seven column table with one header row.
    A1: Sunday
    Fill right to G1.
    A2: =IF(ROW()-1>MAX(Index :: A),"",LOOKUP(ROW()-1,Index :: A,Index :: $H))
    Fill down to A11. Select A2:A11, Fill right to column G.
    Separate the table into seven single column tables, one for each day.
    To do this:
    Click on any cell to make the table active and show the column and row reference tabs.
    Click one of the column reference tabs to select that column.
    Click the same tab a second time and drag down until the column separates from the rest of the table. Continue to drag until the column is completely separated from the table, then release the mouse button.
    Repeat for the rest of the columns to be separated.
    Each of these tables may be placed on a separate sheet to make printing a single list easier if desired.
    Regards,
    Barry

  • Multiplying entries, all-day event issues, and freezing

    I've been having quite a few issues with iCal since I upgraded to Snow Leopard (but I don't regret it).
    1. Several of my all day events have been multiplied, so that they are entered in 3, 4, even 5 times.
    2. Many all-day events that were set to last only one day now span two or three.
    3. Whenever I try and access December of 2010, iCal stops responding, and causes almost all programs to freeze until I force quit iCal.
    Please help!

    I've been seeing new problems with iCal since moving to Snow Leopard too. If, when the alarm for a repeating event comes up I tell I call to remind me later, I will get multiple reminders instead. Also, for repeating event sometimes the alarm will not repeat, but instead get changed to only alert for a single day.

  • Week Day Basis comparison

    Hi, Experts...I am having a very strange requirement. In a report i need to give current sales of current date as well as but date comparison is based on week and day not date. Like if current date is 1st Jan 2011sature day 1st week of 2011 and i am executing the reports, it will also display the sales of 1st week sature day of 2010 wich is actually 2nd jan. So i am calculating th e week number and accordingly finding the date of the current year day. Its giving the accurate result. But i run for 31.12.2009 wich is 53rd week its gives me blank as year 2008 has only 52 weeks. Pls suggest me a FM for comparing the days as AS400 is able to give the sales.

    Hi,
    I think we can put the condition like it the curr week is last week of the year then get the last week of the prvs year.
    like if curr date is 30.12.2010 then the week is 53, we can use fm 'BKK_GET_LASTWEEK_OF_YEAR'  to check wether it is last week of the month, then use the same fm to get the last week of the prvs year.
    Then we can get the day of that week ...
    Regards,
    Anmol.

Maybe you are looking for