Parameter rsau/local/file does not exist

I would like to activate the paramater rsau/local/file, but it does not exist. The version i'm using now is ECC 6.0. Is it because the parameter is different in ecc6.0 or anywhere I can set the location for the security audit log?

Hi,
Yes, as per the documentation - automatic deletion is active by default.
http://help.sap.com/saphelp_nw04/helpdata/en/e5/de86f935cd11d3acb00000e83539c3/content.htm
Regards,
Srikishan

Similar Messages

DAC - Custom Workflow Task - Parameter file does not exist

Hi expert,
I have some issues running custom task in DAC with Siebel OLTP to DW. Please see log below. Anyone can help me in this regard?
Note: Siebel Custom Table to Data Warehouse Custom table - Created new workflow in Informatica for custom table
ANOMALY INFO::: Error while executing : INFORMATICA TASK:DU_SDE_SBL_78_Adaptor:SDE_TCDimension:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Request to start workflow : 'SDE_TCDimension' has completed with error code 17
Error Message : Parameter file does not exist.
Connected to Integration Service: [Arcis_Dev_Integration_Service].
ERROR: unable to open local paramfile [XX/obi/Informatica/PowerCenter8.6.1/server/infa_sh ared\SEBL_78.DataWarehouse.DU_SDE_SBL_78_Adaptor.SDE_TCDimension.txt].
Disconnecting from Integration Service
=====================================
          STD OUTPUT
          =====================================
          Informatica(r) PMCMD, version [8.6.1], build [183.1217], Windows 32-bit
          Copyright (c) Informatica Corporation 1994 - 2008
          All Rights Reserved.
          Invoked at Thu Sep 22 13:34:26 2011
          Connected to Integration Service: [AD_Service].
          ERROR: unable to open local paramfile [XX/obi/Informatica/PowerCenter8.6.1/server/infa_shared\SEBL_78.DataWarehouse.DU_SDE_SBL_78_Adaptor.SDE_TCDimension.txt].
          Disconnecting from Integration Service
Edited by: Jing Jang on Sep 22, 2011 11:58 PM

Hi thanks for replying.
I Assembled the subject area, generated parameters and I built the execution plan, everything is success. For other task parameter file is generating.
DAC log shows as you mentioned.
pmcmd startworkflow -sv Arcis_Dev_Integration_Service -d ARCISDEV_crmobidev -u Administrator -p **** -f DU_SDE_SBL_78_Adaptor -lpf /XXX/obi/Informatica/PowerCenter8.6.1/server/infa_shared\SEBL_78.DataWarehouse.DU_SDE_SBL_78_Adaptor.SDE_TCDimension.txt SDE_TCDimension
Error Message:
ANOMALY INFO::: Error while executing : INFORMATICA TASK:DU_SDE_SBL_78_Adaptor:SDE_TCDimension:(Source : FULL Target : FULL)
          MESSAGE:::
          Irrecoverable Error
          Request to start workflow : 'SDE_TCDimension' has completed with error code 17
          Error Message : Parameter file does not exist.
          Command Used: pmcmd startworkflow -sv Arcis_Dev_Integration_Service -d ARCISDEV_crmobidev -u Administrator -p **** -f DU_SDE_SBL_78_Adaptor -lpf /XXX/obi/Informatica/PowerCenter8.6.1/server/infa_shared\SEBL_78.DataWarehouse.DU_SDE_SBL_78_Adaptor.SDE_TCDimension.txt SDE_TCDimension**
          Workflow Message:
Since we gave the InformaticaParameterFileLocation as /XXX/obi/Informatica/PowerCenter8.6.1/server/infa_shared , it is showing exactly. But I don't know why the "\" slash is coming.
DAC server is on AIX and I'm running DAC client from another windows machine, I have Informatica Client installed on my machine.
Right now I'm checking with Unit Testing, do I need to run full execution to get that parameter file generated?
Appreciate your help.

File does not exist: ucm cluster...

Hi all,
I've a 10gR3 UCM cluster with 2 nodes. I've replicated a new web site project.
The request to node 1, works fine, but the node 2 gives an error. I've seen the apache logs at node 2 and get the next error:
[Fri May 18 09:10:04 2012] [error] [client 134.134.20.64] File does not exist: /usr/local/apache2/htdocs/<name of the website project>
It seems that the apache (at node 2) doesn't redirect to ucm and it's looking for the web site at local (apache document root).
This cluster has serveral web sites project working fine...but with this new web site project doesn`t work...
Any advices will be appreciated.
Thanks in advanced

do you see ucm related entries in your httpd.conf? are their any other .conf files being imported? perhaps in the /conf or /conf.d directory?
I'm thinking that you are missing a <Location /siteroot> or the <Location /> element on the broken server. I can't recall the 10g config off-hand, but there are some http server related post-configuration steps for site-studio. I'm thinking that they might not be working on the broken server. perhaps a restart of the http server on the broken server?
it seems that the path is going to the http server's documentroot instead of the ucm module, which it would do if the configs were correct.
I'd double/triple check those configs & do a restart of the http server.
-ryan

File does not exist... Unknown request from my internet network

Mu Web server log is full of this kind of entry :
[Wed Mar 14 22:04:31 2007] [error] [client 192.168.0.2] File does not exist: /Library/WebServer/Documents/wpad.dat
192.168.0.2 is my PC (under Windows XP) on my local network and I tried to understand but I have no browser runing currently but I still get entry for this wpad.dat.
My PC is trying to get this file but there is no wpad.dat on the server.
Can someone tell me what's going on ?
Thanks

Check this link:
http://www.microsoft.com/technet/isa/2004/plan/automaticdiscovery.mspx
-Gregg

File does not exist: /oa_servlets/AppsLogin

Hi.
The Apache error log reads thus: File does not exist: /oa_servlets/AppsLogin.
The login page appears. BUt when selecting the EBS suite link, or OAM link, the HTTP 404 Not Found appears.
I have checked that all services are up on the server. I have cleared the web cache and rebooted Apache.
The only change to this environment is that I took it out of archivelog mode today.
I am not sure where the /oa_servlets/AppsLogin is supposed to be - if I did then I could verify where it is.
Apart from raising an SR, are there any other ideas for this?
Thank you!
DA

Just checked the dbc file - does not contain any information (how could this happen??)
[ cat da_test.dbc
# $Header: template.dbc 115.4 2000/04/20 11:50:57 pkm ship $
# TEMPLATE.dbc
# Template database configuration file.
# Create one copy of this file for each database instance this
# Applications Server will connect to. Each file should have the name
# <database_instance_name>.dbc
# and be located in this directory ($FND_TOP/secure).
# Change each of the parameters below to values appropriate for
# the database instance. Do not change the syntax.
# This file can be gererated using the AdminAppServer tool.
# This is a java utility that can be run from the command line.
# Instructions to use this tool are documented in the Applications
# Sysadmin Manual.
# TWO_TASK
# SQL*Net name of database.
TWO_TASK=database
# FNDNAM
# Oracle User to be used for Oracle Applications connection.
# The FNDNAM Oracle User must have Oracle Applications privilege level
# 'Universal'.
FNDNAM=APPS
# GWYUID
# Oracle User/Password of the public account to be used for initial
# Oracle Applications connection.
# The GWYUID Oracle User must have Oracle Applications privilege level
# 'Public'.
GWYUID=APPLSYSPUB/PUB
# GUEST_USER_PWD
# Applications User/Password of the Guest user.
# The Guest Applications User is a public Applications user
# with no responsibilities assigned. If no such user exists,
# create one in the 'Define User' form. Do not use a user with
# any active responsibilities. Note: This parameter is for
# an applications user NOT an Oracle user. The Guest user
# is seeded with 11i.
GUEST_USER_PWD=GUEST/GUEST
# THE FOLLOWING PARAMETERS ARE RELEVANT ONLY
# IF JDBC IS BEING USED. IF THEY ARE NOT SUPPLIED, DEFAULTS
# WILL BE USED.
# APPS_JDBC_DRIVER_TYPE
# The type of JDBC driver being used. If no value is supplied,
# the thick (OCI) driver will be used. Give a value of THIN
# or THICK depending on the type of JDBC driver to be used.
# For a detailed discussion on the THIN vs the THICK driver,
# refer to the JDBC documentation. For Release 11i , this
# should be set to a value of THIN.
APPS_JDBC_DRIVER_TYPE=THIN
# DB_HOST
# The host machine on which the database resides. This parameter
# is required only if the THIN DRIVER is being used.
DB_HOST=host_name
# DB_PORT
# The port of the host machine on which the database resides.
# This is required only if the THIN driver is being used.
DB_PORT=port_number
# DB_NAME
# Database instance name.
# This is required only if the THIN driver is being used.
# If no value is provided, the TWO_TASK is used.
# DB_NAME=db_name

Lookout 6.6 - Logon Error: Security file does not exist

I'm trying to run Lookout 6.6 evaluation. It loads fine, I get a message saying that it's running evaluation version. I press OK to clear that box and a logon window opens. It's filled in with the default settings, Administator, local doman, no password. I click Log On and it gives me the error which is in the subject line, security file does not exist.
I've read on here that the lookout.sec file doesn't exist in the System32 folder. In this case, I've found it and it's there.
I've trying different user names, I took the .sec file and copied it in various locations: windows folder, and the programs root folder - obviously there was no effect. I tried editing the lookout.ini file to remove the log on information to see if that clears it up (even deleted the file to see if that work), but to no avail. I also tried re-installing the program, but there is no uninstall button - windows program removal tool cannot even remove, modify, or repair the program. I ran the install a couple of times as well.
Does anyone know what I can do?
Here's what I'm running:
(I bought this computer today)
Windows 7 x64-bit Home Premium
4gb ram
500gb hard drive
It's very minimal, since all the computer is meant to do is run this program and replace the computer Lookout 5.0 was running on (mobo got fried).
- Please - let me know if you have any suggestions.
Solved!
Go to Solution.

Hi Mike! Thanks for replying!
I've just tried it in admin mode and it hasn't worked. I've also tried using compatability mode, but to no avail.
I downloaded the lookout 6.2 version to try and it gives me the same error as well.
Another thing to note, I tried uninstalling it (either lookout 6.6 or 6.2 doesn't matter), but all options it gives (modify, repair, and uninstall) are all greyed out.
Any thoughts/ideas?

Util_file.fgetattr 'file does not exist'

Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
The file exists and thesqldr uses this file. Here is my code.
set serveroutput on
DECLARE
v_dir VARCHAR2(200); -- Directory containing the data file
v_filename VARCHAR2(100); -- Data filename
v_file_exists boolean;
v_file_length number;
v_block_size number;
BEGIN
v_dir := '\\nrs2\WEBSITE\INCOMING\STARPUBS\';
v_filename := 'PC.ORDERS';
DBMS_OUTPUT.PUT_LINE(v_filename); --shows filename
DBMS_OUTPUT.PUT_LINE(v_dir); --shows directory
utl_file.fgetattr(v_dir, v_filename, v_file_exists, v_file_length ,v_block_size );
IF v_file_exists THEN
dbms_output.put_line('File Exists');
ELSE
dbms_output.put_line('File Does Not Exist');
END IF;
END;
Output:
SQL> @C:\STARPUBS\STARPUBS\dataformats\sql\fileOrderscheck.sql
PC.ORDERS
\\nrs2\WEBSITE\INCOMING\STARPUBS\
File Does Not Exist
PL/SQL procedure successfully completed.

Create or replace the directory locally works:
create or replace directory USER_DIR as 'D:\wkdir';
grant read on directory USER_DIR to USER;
However when creating a directory to another network file on another server it says file doesn't exist
create or replace directory SYS_DIR as ''\\nrs2\WEBSITE\INCOMING\STARPUBS\';
grant read on directory SYS_DIR to USER;
The nrs2 server is used as a file server and doesn't have oracle client.
So my question is can the CREATE Directory statement manage access to another file system or is it limited to only local files?
If so, is there another way of accessing these files in the nrs2 server using UTL_FILE package?
Thanks
Mike.

Messaging Server 4.1: Received mail is not returned to the sender if the receiving local account does not exist.

I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.

Do the following steps: 

<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>

Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.

For more information, please see the document Messaging Server
Administrator's Guide, Chapter 3, Configuring SMTP Services at 
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371

On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below.

File does not exist: /oa_servlets/AppsLogin-Urgent plz

Hi;
I have r11.5.9 on AIX 5.2 i create one new AIX 5.3 server give same IP and copy all folder from 5.2 to 5.3 wiht exact path.
With same user i can open db+lsnr+apache on new 5.3 server But when i try to login EBS i can see login page also Ebuniess enter link but when i click it it thoruh 404 page can not found
In apache log file i have File does not exist: /oa_servlets/AppsLogin, i can not find pages under $COMMONTOP on 5.2 and my new 5.3 server. But on 5.2 i canlogin system wihtout any issue
All services start wihtout problem also db, i run autoconfig on appstier but when i try to run on dbtier it thotugh error:( I am not sure i need to run autoconfig on dbtier for upper erro)
AutoConfig will consider the custom templates if present.
Using ORACLE_HOME location : /xxx/xxdb/9.2.0
/xxx/xxdb/9.2.0/jdk/bin/jre and /xxx/xxdb/9.2.0/jdk/9.2.0/jdk/bin/java not found Pass option 'java' on command line
and yes there is no such a file like that. How i can solve those problem
thanks

Hussein i cant run autoconfig also preclone on dbtier but apps tier i could run autoconfig and its end wihtout error
http://xx:8001/OA_HTML/jsp/fnd/aoljtest.jsp http://xxx:8001/pls/TEST2/FND_WEB.PING - too
http://xx:8001/aplogon.html
I cant open those too
Fri Sep 17 19:49:00 2010] [error] [ File does not exist: /oa_servlets/AppsLogin
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Fri Sep 17 20:14:39 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:39 2010] [error] [] File does not exist:
[Fri Sep 17 20:14:51 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:51 2010] [error] [] File does not exist:
[Fri Sep 17 20:14:55 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:55 2010] [error] [] File does not exist:
[Fri Sep 17 20:15:06 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:06 2010] [error] [ File does not exist: /servlets/Hello -
[Fri Sep 17 20:15:11 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:11 2010] [error] [ File does not exist: /servlets/Hello
[Fri Sep 17 20:15:14 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:14 2010] [error] [] File does not exist: /servlets/
[Fri Sep 17 20:15:50 2010] [error] [] File does not exist: /xxxx/portal/oracle/_servlets/Hello
[Fri Sep 17 20:15:59 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:59 2010] [error File does not exist: /oa_servlets/Hello
[Fri Sep 17 20:16:15 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:16:15 2010] [error] [] File does not exist:
[Fri Sep 17 20:18:04 2010] [error] script not found or unable to stat: /xx\xxora/8.0.6/tools/web60/cgi/ifcgi60

File does not exist: /www/public_html/null, referer: - error in log file from IE8 and IE9

I just updated an existing slide show that was created several months back. Since loading my new set of files to our web server, we keep getting the following error in our server log files when someone loads our page in IE8 and IE9:
File does not exist: /www/public_html/null, referer:
One of our programmers tracked the error to this line of code, but we're not sure what's causing it:
Muse.Utils.addSelectorFn('#slideshowu70', function(elem) { new WebPro.Widget.ContentSlideShow(elem, {autoPlay:true,displayInterval:6000,slideLinkStopsSlideShow:false,transitionStyle:'horizo ntal',lightboxEnabled_runtime:false,shuffle:false}); });/* #slideshowu70 */
Any suggestions?
Thanks!

The errors aren't showing up on the client side, only in the server access logs. Every time the page is loaded with IE8 or IE9 and the Muse.Utils.addSelectorFn with the #slideshowu70 line is hit, it generates four errors in the server access logs.
Our admin guy pulled the errors from where it was clicked on from the Adobe forum. He said it also appeared that you tested it with www added to the url (if this was when you were testing it)...
[Mon Feb 04 13:58:57 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:00 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:08 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:33 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://www.stingrayboats.com/
[Mon Feb 04 13:59:43 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://www.stingrayboats.com/
The reason we find it strange is because it did not result in errors with the previous version of the slideshow. The only thing that changed this time around is that I removed some slides and added additional ones, but I noticed that there is a lot of difference in the code and even the scripts that are used. And I did copy over all of the scripts, css files, etc., so it's using all of the new source files.
I was hoping it was something that you guys had noticed if you review the access logs when you're testing. While it works perfectly on the client side, the IT guys do go through our access logs, so it would be nice to eliminate the errors.
Thanks for looking at it!

Error in script task "The name 'file' does not exist in the current context"

I am new to the c# scripting and SSIS come from PHP and Foxpro.
I am using SSIS with a script task and I am getting am errror "The name 'file' does not exist in the current context" in the following code in the picture below: (See
Why does the object named "file" go away after the first refrence to it?? How do I make it avaliable for the whole script??
 public void Main()
 String cFileInfo = null;
 DateTime dFTPFileDateTime;
 bool fireAgain = true;
 List<IRemoteFileInfo> fileList = (List<IRemoteFileInfo>)Dts.Variables["SFTPResult"].Value;
 foreach (IRemoteFileInfo file in fileList)
 cFileInfo = file.Name + "|" +file.ModifiedTime +"|"+ file.Size;
 Dts.Events.FireInformation(1, "Name ", cFileInfo, "", 0, ref fireAgain);
 dFTPFileDateTime =
file.ModifiedTime;
<< This is where the error is occuring.
 Dts.TaskResult = (int)ScriptResults.Success;

I think you forgot { and } after the loop... Or is that deliberately?
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

File does not exist :C:/oracle/product/10.2.0/db/apache/apache/htdocs/emd/m

Dear All,
unable to Login on Logging into Apex Login Page,
in Apache Log the Following Error is found
[ecid:1213173391:172.20.233.149:1788:1840:1.0]
File does not exist :C:/oracle/product/10.2.0/db/apache/apache/htdocs/emd/main/
what cud be the Problem restared the Apache Server Still the Same Error Found.,
please Help me out in this
thanks alot
Edited by: khaja on Jan 18, 2009 12:48 PM

Hi,
Probably a mistake in your dads.conf file.
( Also check the APEX_PUBLIC_USER in the dads.conf file )
Kind regards,
Iloon

File does not exist: invalid_object_highlight.gif

Dear all -
The Apache logs on our development system regularly get clogged up with entries like this:
[<date>] [error] [client <ip>] [ecid: <-->] File does not exist: <APEX path>/Apache/Apache/images/ob/i/invalid_object_highlight.gif What's happening is that when you browse Views etc. in the Builder (SQL Workshop), APEX looks for this file and can't find it.
The reason it can't find it is that, not only does the GIF not exist in our setup, the folder being referenced doesn't exist either.
Can anyone point me towards the error in our setup that is leading to this situation?
Many thanks,
John

Hi ,
I am new to APEX .
Working on APEX 3.1.1.00.09 version
Please reply me...
null

File does not exist, SMTP permanent error

Hi All,
I got stuck with this error, please help me on this.
Mine is windows OS, apps 11.5.10.2
I have a cocncurrent program out file (.out) in out directory and also the same file with naming convention 'name_concurrenrequestid_1.EXCEL' extension in the same directoy. I need to send this EXCEL file as attachment to email id in windows environment. Whenver submit the request is giving the error.
File Does Not Exist
Error in Send Mail: ORA-29279: SMTP permanent error: 501 5.5.4 Invalid Address.
I verified the file , it is already existed in the directory. Why did it not recognized the file. I tried the below query in toad,, but got the 'FALSE' for %APPLCSF, and got the TRUE for custom directory which has the same file
declare
v_boolean BOOLEAN;
v_Len NUMBER;
v_Block NUMBER;
BEGIN
utl_file.fgetattr('%APPLCSF%\%APPLOUT', 'name_concurrentreuestid_1.EXCEL', v_boolean, v_Len, v_Block);
if v_boolean then
dbms_output.put_line('v_boolean: TRUE');
dbms_output.put_line('L:' || to_char(v_Len));
dbms_output.put_line('B:' || to_char(v_Block));
else
dbms_output.put_line('EX: FALSE');
end if;
END;
I do have full access on this folder. Once it recognizes the file I can send the mail.
Appreciate any help on this. Plz...........
Thanks,
JP

Thank you for the quick reply Srini.
But my email program is working fine if I change the path from %APPLCSF%APPLOUT to Customtop\out directory to identify the file. It was sent the attachment also to my email id.
But my requirement is I need to send the file from Out directory not from customtop out . Even it is not recognized the .out file using this UTL_File.fgetattr() in out directory.
Appreciate any furthur assistance.
Thanks,
JP

Error: File does not exist (while trying to get Petstore and demos to run)

Hi all,
I have been trying in vain to get the Petstore demo and other servlet demo HelloWorld to run. It seems to install okay cause it creates the directories and extracts the .ear or .war files. My problem is connecting to the application. When I run http://my.host:7778/estore or http://my.host/7778/HelloWorld/HelloWorld I get and error in the Apache error_log that says: File does not exist: c:/oracle/components/apache/apache/htdocs/helloworld/helloworld and File does not exist: c:/oracle/components/apache/apache/htdocs/estore
I have looked and searched everywhere for help but to no avail. Under the WebModule the URL Binding is /HelloWorld and /estore.
Please help me!!! I am going crazy with this.
Thanks,
Grant
PS. I am running 9iAS 9.0.2.0.1 and everything is on 1 Windows 2000 (sp1) machine. Infrastructure and Components in separate dirs with port 7777 and 7778 for each.

I'm having the same problem under a solaris system did anyone ever find the solution to this problem. For some reason the server just wants to use the document root instead of the deployed application directory.

Parameter rsau/local/file does not exist

Similar Messages

Maybe you are looking for