Parameter settings for windows - Note

Hi,
Can anyone help me to know the SAP note number for default Parameter settings for windows .
I want to verify all the parameter values.I tried to find out the number, but no luck
We have severe performance issue in our D01 and Q01
Thanks is advance.
Regards,
Prakash

Hi,
Most of the performance parameters are OS independent. You need to check ST02 and check most of the SWAP comings in which area and there you can click on detail analysis menu which will give you parameters for the buffer settings. You need to adjust these parameters in instance profile in RZ10.
Also, if your database is oracle10g then make sure that SAP note 830576 should be implemented.
Thanks
Sunny

Similar Messages

Regional and Language Settings for Window and BEX Style

Hi All,
When I change the Regional and Language Settings for Windows, Standards and Formats value to English (USA) the standard Style for BEX is active. For instance, input-ready cell is bordered with blue. But when I switch to Turkish this style is not active.
Additionally, I have to change Style for each Workbook one by one. How can we adopt a style to every workbook.
Regards,

Lars,
This is a setting on the 'Defaults' tab in the User Profile. This can be set when a new user is set-up in SU01, or it can be changed by each user according to personal preference in SU3. I'm sure there is a system table where these settings are stored that could probably be edited for all users, if that is desired, but I don't know which table that would be off the top of my head.
Hope this helps...
Bob

Error (-45054) for WINDOWS not for a mac

For the past three days i have been trying to download app updates via the iTunes WINDOWS software program without success due to the error -45054. I have done many a search but can only find answers on how to fix the problem on mac computers. I am running windows 8 (yes i know it ***** you don't have to tell me)
There are a total of two users on the computer in question. However the error only occurs in the account of one of the two users. User #1 has no problems whatsoever and is a administrator. User #2, also listed as a administrator always gets the -45054 error.
Files are all set as shared with everyone with full control.
i have tried to remove iTunes and reinstall but still no help. Any suggestions are appreciated as long as they are for WINDOWS not for mac

I tried submitting this same problem as a feature request and/or bug report.
Unfortunately, and somewhat disconcertingly, the Captivate Bug Report form also doesn't work. No matter how thoroughly I entered my request, I got these error messages:
The following error(s) must be corrected before this form can be completed:
Please enter your name
Please enter your E-mail address
Please select if it is feature request or the bug report.
Please select a product
Please enter the issue description

I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany. When I try to order for Germany, it gives me only an option for Windows, not Mac. How can I order?

I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany. When I try to order for Germany, it gives me only an option for Windows, not Mac. How can I order?

In Germany no telephone number nor web chat is available. Searching on the Adobe site tells me that this forum is the only avialable means to ask consumer questions. I am giving up and ordering from elsewhere.

Memory settings for Windows using newest bits

Hi All,
I the install guide for this newest set of bits, I suggested memory settings of 1.5GB for the Xmx value. This doesn't work for 32bit Windows.
On Windows, if you bump up the -Xmx, then you cannot use the PermSize parameter.
The heap size is calculated as -Xmx + PermMaxSize. If these two add more than 1408MB then WLS will not start.
Here is the recommendation for Windows 32bit:
set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=128m
and
Xmx 1024
and
Managed server configuration
If you are using 32bit Windows, please share your experiences.
Heidi.

So, you do not recommend a single instance install on Windows XP? On our local XP machines we had been running single instance because it seemed simpler and it was recommended in the install instructions. On our shared Windows server the managed server configuration was used.
I have been able to run the latest release of the WLS and BPM Workspace on my local XP machine using these settings configured in my setSOADomainEnv.cmd file. It is very SLOW....30 second response time, but it does run. These same settings are not working for everyone else on my team....they are still playing around to find the right answer for their local XP machines.
set DEFAULT_MEM_ARGS=-Xms640m -Xmx768m
set PORT_MEM_ARGS=-Xms768m -Xmx1536m
set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=128m -XX:MaxPermSize=512m
set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=256m -XX:MaxPermSize=512m
I have noticed, however, that over time (maybe an hour or so) the admin server starts sending out of memory warnings. So, I have to stop WLS and restart it in order to keep working with reasonable response tiems. Often these out of memory warnings start when it is running but idle.

Is it appropriate to apply the hardening settings for Windows 2008 R2 server to Windows 2008 server?

We would like to adopt the hardening recommendation for Windows 2008 R2 from CIS to all our DC servers. However, but then we found some of our DC in remote sites are Windows 2008 server only.
Is the hardening settings from Windows 2008 R2 from CIS also applicable to Windows 2008 DC?
Thanks for your attention.

Yes, this should be fine. Hardening only specific security settings, registry keys etc and there's not much difference if you consider hardening.
Just for reference, here's the difference between 2008 and R2 :
http://technet.microsoft.com/en-us/library/dd391932(WS.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Storage Parameter Settings for Cube

Hi , Thank alot for such a wonderful suggestions, We have 25 millions of records going to cube so for high load performance on cube Can you check and help me Data Base Storage Parameter Settings. can you tell if
Fact Table
<b>1. Data Class for fact tables is DFACT or should i change to any other
2. Size 4 >150 MB or should i change to any other</b>
Dimension Table
<b>1. Data Class DDIM or should i change to any other
2. Size 0 <500 K or should i change to any other</b>
Help me with this.
Thanks
Poonam Roy

Hi,
I don't think that we need to some extra settings at cube , if want to go with Acceletor.
I am not able give good info on it,because I have not yet worked on it. But if you spend some time to go through all the mentioed links,Definately You would not have any doubts on it.
Also refer the help link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/48c0417951d117e10000000a155106/frameset.htm
If you donot have chance to use acceletors, then I suggest you think about Data marts (no of cubes with same structures and with ssame datasource) which holds physically have different range of data.And then use a Multi provider upon it.
And also use Cache methodology for the reports built on these cubes.And use precalculattion to heat up the cache.
Also check the 1025307 note.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Message was edited by:
Anil Kumar Sharma

Found a fix for windows not recognizing vision M, possible for oth

I went through the same frustration as so many people about windows not recognizing my vision M. Here's how I solved it. Go to device manager (right click on My Computer, choose manage then device manager) go to the unrecognized usb device, right click and choose update driver. choose no fior connecting to windiows update, then install software from a specific location, now choose don't search, I will choose the driver to install, find and install the driver for portable devices called MTP device. this should solve the issue. this is only for players not recognized by windows. I'm not sure if some versions of wondows can't figure out where to find the driver or what.

Yes that is one way to get it working
Otherways are suggested <a href='http://www.nomadness.net/modules.php?name=FAQ&myfaq=yes&id_cat=8&categories =Nomad+Jukebox+Zen#228' target=_blank>here[/url].
Glad to hear that you got your issue solved on your own.

Text in iPod section of iTunes for windows not totally showing up???

When my iPod/iPhone is connected and I browse different sections of iPod/iPhone are in iTunes for Windows, there are several lines of text instructions. Some of which don't display the entire sentence. This seems very odd since there is plenty of blank screen real estate available.
For example:
In the Summary Section (with iPod/iPhone connected), I see 2 lines of text under Version and 4 lines of text under Summary. None of the sentences can be seen complete.
In the Music section, under Sync, I see 1st line reading "Include music videos" but on the next line I only see "Include voice m..." and the following line I see "Automatically fill free space with songs". So why did the shorter sentence not display complete?
Very odd.
Dell laptop w/ Windows 7 HP 64.

Mine is a brand new machine. Burning software was installed before iTunes was installed. I am looking at this article which points to a possible problem with the GEAR drivers: http://support.apple.com/kb/TS2308
It also points to the afs.sys and afs2k.sys drivers as a potential problem. I've verified that I don't have these drivers on my machine.
When I go to the GEAR site, it tells you to manually uninstall the GEAR drivers and install the latest ones. First, manual uninstall which involves editing the registry. Really? While I'm quite the expert at registry editing, NO CONSUMER should ever be told to edit the registry to delete anything. Second, if in fact the GEAR drivers are the problem, shouldn't iTunes install the right ones? This is a prime example of poor software engineering at its core.

Remote Data Source Settings for Lotus Notes CWS

I have installed the Crawler Web Service for Lotus Notes on a box seperate from Machine hosting Portal Server. After that I did all the migrations successfully at the portal side as mentioned in installation guide. But while configuring Remote data Source ,in Authentication Page , i am not getting an edit box to specify the User ID file.Its just have edit box to specify password.
Its taking the last user id that was used in the Notes Client on that machine, or more specifically the KeyFilename setting in the Notes.ini file
How can i set the User ID File(to be considered).
Moreover there is an error
An error occurred while validating the remote XUI service. Verify the Web Service settings, including the SOAP Encoding Style.
Can anybody provide pointers on configuring the Remote Data Source for Lotus Notes database
Thanks in Advance

Hi,
I would check this with the Lotus Notes guys. If the mail is OK in SOST, then SAP is delivering the mail correctly. There is something wrong with the Lotus Notes client itself. I have seen this same problem and I have alos witnessed the HTML email to crash the whole Lotus client. (This lead to a situation that it was just easier to send the plain text emails.)
Regards,
Karri

Oracle 10g Release 2 for Windows not working

Hi,
I am trying to download oracle 10g R2 for Windows and also some JDBC drivers. But none of the links on the following page seem to be working!
http://www.oracle.com/technology/software/products/database/oracle10g/index.html

These seem to be fine so you might want to post additional details about your error. We are not aware of any downtime recently.

Kinect v2 for windows not working

I recently perchased the Kinect v2 for windows once I plug it and try to make it work with any software such as 3d builder it doesn't recognize the Kinect and the computer start making the sound as if the usb is being plugged and unplugged several
times
I ran the verifying tool and it says that the Kinect is not connected. the splitter is on and the Kinect is plugged in. the Kinect when plugged doesn't show any sign of life no light on the fan in not turning...
Please can anyone help
I tried to reach Microsoft several time with no help at all
Thank you,

See troubleshooting information as the system is not able to connect the sensor without some failure in the USB3/Device negotiation of bandwidth/resource. That is typically chipset issue which you can use the Kinect Configuration Verifier tool
to determine or you can dig into your device manager for further details.
If you cannot resolve the issue with the steps in this thread, you will need to use a different system:
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
Carmine Sirignano - MSFT

Itunes Proxy settings for windows IE9

I have a proxy server set, but I want to put itunes, in the exception list so i can continue to access the store and the content.

Although the following user tip is for an iTunes for Windows proxy issue, it's also worth a try with a Safari proxy issue too, especially 306 errors. (iTunes and Safari both use the same proxy settings so they can get hit in similar ways by the same sorts of problems.)
http://discussions.apple.com/thread.jspa?threadID=2345214
Any help with your error, David?

Airport software version 5 for Windows not available for download?

Hi, Apple.
You're kidding, right?
I can download the Airport 5 update for Windows, but that update won't run if AirPort 5 isn't already installed.
Where am I supposed to get it in the first place? My laptop is very tiny, it doesn't have a CD-ROM drive.
Don't bother replying to this.. By the time you read this message I will have already popped the CD in my Linux machine and copied the files over via SSH. Then I'll run the update.
In the future, please make things easier for me.
Furthermore, how about you update the Airport (N) itself so that it will add local machine's hostnames to the embedded DNS server? I mean, heck, you already have features that let me reserve IPs based on MAC address or DHCP client ID... Those machines in the least should be easy to resolve.
Cheers,
--Dave Loyall

I suspect that Apple wants us to buy the Airport Extreme, or replace our Airport Expresses with Apple TVs. The AX is a wireless G/B product, and the new draft is N ... which is better for streaming larger media files.
Anyway, you can try this for a Windows system:
1. You will need a program called Less_MSIerables. Google it.
2. Download it to your desktop and unzip that file (it should end up in your unzipped file folder)
3. Now, download Airport Extreme software.
4. Run
5. A window will open that states "This Update requires AirPort Version 5.0 to be Installed".
Don't exit from this window.
6. <Vista> Instead, go Start ->start search and type in %temp%. Enter. <XP: use Run instead of Search and type in %temp%. Enter.>
7. You will see a file folder called something like IXP050.TMP (the number varies)
8. Open it.
9. You should be able to see a file called APsetup.msi.
10. Click your mouse on it, but don't open it.
11. At the top of the window you will see the address of this file. If not, click the yellow file folder in the address bar. Copy that address.
12. Next go to the folder in which you saved the unzipped version of Less_MSIerables
13. In a subfolder you will see a file called Lessmsi.
14. Right-click on this file
<Vista Only>
15. Go to properties.
16. Go to compatability.
17. Run in XP Mode
18. Apply
19. OK
20. Again right-click on icon.
21. Run as administrator.
<Vista and XP>
22. In the window that pops up, paste the address of Apsetup.msi
23. You will see a list of many files, but one of the first will be APUtil.exe.
24. Extract this file to a location that you can easily find.
25. A file folder will appear with a name like cab#APSetup.cab1
26. Open that file folder and you will see a file APUtil.exe
27. Click on that file, and the admin utility will open. You should be able to find your airport device.
I suggest that you move this file to your desktop for easy access.
If you are doing this for an Apple computer, there are posts on how to do it; and I think it is a good deal simpler to do.
Peace out.

Download ADE 2.0 for Windows-Not working?

Hi,
I've downloaded Adobe Digital Editions 2.0 for Windows thrice from the Adobe website link. It is 5.6 MB and downloads in seconds (as in 3-5). Nothing I do makes it run. I'm logged in as Administrator.
An aside, though it should not make any difference, I am doing this over Teamviewer 7.0.14563 on my father's computer.
Any advice?
Thanks

I have the exact same issue.
I'm on Vista 64, I have already 1.7.2.1131.
The exe after being downloaded just cannot be run. I have an Admin account, and even if I right-click and choose Open as Administrator, it does not work..
I don't normally have antivirus issues, but for the record I have AVG free. I have downloaded on 2 separate browsers.
I have tried installing before and after having uinstalled ADE 1.7.2, but that seems to make no difference. I have several Adobe apps (trial editions and regular editions) on my machine, with nothing giving me problems except this one.

Parameter settings for windows - Note

Similar Messages

Maybe you are looking for