Parameter value for the Compensation Review CREVI is invalid

Dear Friends in a trying to access the Compensation Review application in MSS when i preview it applications shows the list of the employees. when i try to view the details of the comp review i am getting the error
"Parameter value for the Compensation Review CREVI is invalid"
What is this CREVI parameter? How do i get rid of this issue?

Activated the HCM_ECM_CI_1 Business Function

Similar Messages

Values for the automatic posting items are invalid

Hi,
I'm doing two kinds of consolidations, both using its own Special Versions. IFRS and Local Accounting system (Portugal)
In IFRS the system it is working fine.
Although when I try to consolidate in Local Accounting, I have errors.
The customizing of the two special versions only differ in the consolidation of investments. In Local Accounting I have a different account in Net Income Prior to First Consolidation(Appropriation of retained earnings) and in Net Income Item of Statistical Net Income (Selected Items).
After doing this customizing, I tried the Consolidation of investments, and after executing the measure I have the following error "Values for the automatic posting items are invalid".
I can see the document that system is trying to post and everything seems fine. I only noticed that the statistical items are apeearing, which is not normal.
Do you what I'm missing or doing wrong?
I'm new to BCS.
Thanks in advance.
João Arvanas

The message is most likely regarding the posting to the Retained Earnings item defined in Selected Items. I've seen this before and do not recall the specific solution but it entailed using a different item for this.
It may be that the COI setting for displaying the statistical items in the log is version-dependent. If so it may be turned off. I think this is in location of values.

Getting QM parameter values for Raw Material on the basis of goods receipt

Hi All,
I have requirement, while generating inspection lot these tables MCXD&MCXA should update.
when we need a QM parameter value for the month, It should be the average of all the inspection lot generated for the month.
Thanks in advance
Regards
Hanamanta

Ok.. I assume your talking about the actual test result value. These do not roll up into the QM LIS structures used in transactions MCXA or MCXD.
You might be able to create your own structures and have them updated but you would have develop that.
You can create run charts for various MIC's and utilize the SPC functionality if you need monthly averages and trends.
If your batch managed you can easily get reports of batch values via the CL30N transaction. You'll want to make sure you have a characteristic for batch production or receipt date so you can sort and select by date. These can then be loaded to Excel for summing and averaging.
Craig

The "SignFile" task was not given a value for the required parameter "CertificateThumbprint"

We have a line of business app which is deployed via clickonce. I can build and publish the application without any problems but when I try to use Continuous Integration (Build each check-in) I get the following error:
2>C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5):
error MSB4044:
The "SignFile" task was not given a value for the required parameter "CertificateThumbprint".
[C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
Done executing task "SignFile" -- FAILED.
We sign the application (to be more specific: the ClickOnce manifest) using a code signing certificate which is registered in the AD as Trusted Publisher.
The Certificate is stored in Certificate store on my local workstation. The Certificate is also in the certificate store of the build server (1. In the Personal Store, 2. in the Personal store of the TFSBuildServiceHost Service Account and 3. in the Personal
store of the tfs/build server itself).
Where are using Visual Studio 2013 Update 4, C#, .Net 4.5 and TFS 2013 Update 4.
I have no clue what causes this error, any help is appreciated.

I installed the
Windows Software Development Kit (SDK) for Windows 8 and now I can build the solution via command line.
"C:\Program Files (x86)\MSBuild\12.0\bin\amd64\MSBuild.exe" C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln
"C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe" C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln
But the TFS Build still fails.
Here is the error output gathered from the tfsbuild logfile:
Task "AL"
C:\Program Files (x86)\Microsoft SDKs\Windows\v8.1A\bin\NETFX 4.5.1 Tools\x64\AL.exe /culture:de /out:obj\Debug\de\Pulse.resources.dll /platform:AnyCPU /template:obj\Debug\Pulse.exe /embed:obj\Debug\Pulse.View.Localization.CreditsView.de.resources /embed:obj\Debug\Pulse.View.Localization.PulseMainWindow.de.resources
Microsoft (R) Assembly Linker version 12.0.20806.33440
Copyright (C) Microsoft Corporation. All rights reserved.
Done executing task "AL".
2>Done building target "GenerateSatelliteAssemblies" in project "Pulse.csproj".
2>Target "CreateSatelliteAssemblies" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "CoreBuild" depends on it):
2>Done building target "CreateSatelliteAssemblies" in project "Pulse.csproj".
Target "SetWin32ManifestProperties" skipped. Previously built successfully.
Target "_DeploymentComputeNativeManifestInfo" skipped, due to false condition; ('$(GenerateClickOnceManifests)'!='true') was evaluated as ('true'!='true').
2>Target "CleanPublishFolder" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_DeploymentComputeClickOnceManifestInfo" depends on it):
Task "RemoveDir" skipped, due to false condition; ('$(PublishDir)'=='$(OutputPath)app.publish\' and Exists('$(PublishDir)')) was evaluated as ('bin\Debug\app.publish\'=='bin\Debug\app.publish\' and Exists('bin\Debug\app.publish\')).
2>Done building target "CleanPublishFolder" in project "Pulse.csproj".
Target "_DeploymentGenerateTrustInfo" skipped, due to false condition; ('$(TargetZone)'!='') was evaluated as (''!='').
2>Target "_DeploymentComputeClickOnceManifestInfo" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "GenerateApplicationManifest" depends on it):
Task "Copy"
Creating directory "bin\Debug\app.publish".
Copying file from "obj\Debug\Pulse.exe" to "bin\Debug\app.publish\Pulse.exe".
Done executing task "Copy".
Using "SignFile" task from assembly "Microsoft.Build.Tasks.v12.0, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a".
Task "SignFile"
2>C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5): error MSB4044: The "SignFile" task was not given a value for the required parameter "CertificateThumbprint". [C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
Done executing task "SignFile" -- FAILED.
2>Done building target "_DeploymentComputeClickOnceManifestInfo" in project "Pulse.csproj" -- FAILED.
2>Target "_CheckForCompileOutputs" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_CleanGetCurrentAndPriorFileWrites" depends on it):
2>Done building target "_CheckForCompileOutputs" in project "Pulse.csproj".
Target "_SGenCheckForOutputs" skipped, due to false condition; ('$(_SGenGenerateSerializationAssembliesConfig)' == 'On' or ('@(WebReferenceUrl)'!='' and '$(_SGenGenerateSerializationAssembliesConfig)' == 'Auto')) was evaluated as ('Off' == 'On' or (''!='' and 'Off' == 'Auto')).
2>Target "_CleanGetCurrentAndPriorFileWrites" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_CleanRecordFileWrites" depends on it):
Task "ReadLinesFromFile"
Done executing task "ReadLinesFromFile".
Task "ConvertToAbsolutePath"
Done executing task "ConvertToAbsolutePath".
Task "FindUnderPath"
Comparison path is "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse".
Done executing task "FindUnderPath".
Task "FindUnderPath"
Comparison path is "C:\Builds\1\Pulse\DefaultBuild\bin\".
Done executing task "FindUnderPath".
Task "FindUnderPath"
Comparison path is "obj\Debug\".
Done executing task "FindUnderPath".
Task "RemoveDuplicates"
Done executing task "RemoveDuplicates".
2>Done building target "_CleanGetCurrentAndPriorFileWrites" in project "Pulse.csproj".
2>Target "_CleanRecordFileWrites" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "CoreBuild" depends on it):
Task "RemoveDuplicates"
Done executing task "RemoveDuplicates".
Task "MakeDir"
Done executing task "MakeDir".
Task "WriteLinesToFile"
Done executing task "WriteLinesToFile".
2>Done building target "_CleanRecordFileWrites" in project "Pulse.csproj".
2>Done Building Project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (default targets) -- FAILED.
1>Done executing task "MSBuild" -- FAILED.
1>Done building target "Build" in project "Pulse.sln" -- FAILED.
1>Done Building Project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln" (default targets) -- FAILED.
Build FAILED.
"C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln" (default target) (1) ->
"C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (default target) (2) ->
(_DeploymentComputeClickOnceManifestInfo target) ->
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5): error MSB4044: The "SignFile" task was not given a value for the required parameter "CertificateThumbprint". [C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
0 Warning(s)
1 Error(s)

Multiple values for the Parameter

1. Had any tried the selecting MULTIPLE values for the parameter in Oracle Discoverer Plus Releae 4.1 Version 4.1.37.00.0. If so can please let me know how to implement it.
2. In a Page-Detail Cross Tab workbook, I have to show the weighted average instead of the avg or sum. Any inputs please.
3. I have to compare two periods (TOP) of datapoints. Any inputs please.

If you wanted to eliminate the need for users to type in the parameter values, you could create a LOV on the desired column. This will produce a distinct list of all valid values where the user would simply select as the wish. Of course you still need to check the "let user enter multiple values" checkbox if you want them to select more than one.
-DG

What is the Parameter values for passing a password to open a pdf

I need help in finding the Parameter values for passing a password to open a pdf(s)? The software is written in Delphi.

The Copy Protection only protects our Disk from being duplicated and also protects our Software from being copied and used locally.
As far as the password encryption, that is why I created the Post. I was hoping that the password can be coded in our Software to open the password protect PDF that we create. This option would of gave us the security for when the customer copies the pdf to there local drive they would be required to input the password which they would not have access to.

Problem getting parameter values at the service end point

I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
�     Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
�     This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
�     I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
Thanks

I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .

How to get the values for the Authorization Object Fields....

Hi Everyone,
I'm pretty new to the SAP Security and have been working on the Basis sides...I created a new role in PFCG and added a few transactions (ME13) and clicked on the Authorizations tab. In there, the authorization tree is in yellow and red. After providing the Org Values, only the yellow lights remain (apart from the green one ofcourse). Now how do we get the values for the different auth obj fields that are in yellow... say for example
Conditions                                                   COND
Maintain Condition: Auth. for Use/Appl./Cond.Type/Table      V_KOND_VEA
Activity                       03                                                                        ACTVT
Application                                                                                KAPPL
Condition table                                                                                KOTABNR
Condition Type                                                                                KSCHL
Usage of the condition table                                                                 KVEWE
Here the values for V_KOND_VEA fields e.g. KAPPL, KOTABNR etc are missing.
My question is how do we get these values in regard to the requirement provided by the client...is it the functional guys who provide these values or else how is a security person supposed to know it...
All the help in this regard is sincerely appreciated along with the awarding of points...

Hey thanks Alex and Catastrophe for the quick response...
I'll be sitting with the functional team and reviewing the roles created.
Thanks for all the help once more
Regards,
Akash.

11g-[nQSError: 42029] Subquery contains too many values for the IN predicat

Hi,
I am having 2 reports one is for subquery which returns inputs to Main report. Actually the report was working fine in 10g. But in 11g we are gettting following error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 42029] Subquery contains too many values for the IN predicate.Please have your System Administrator look at the log for more details on this error. (HY000)
Please have your System Administrator look at the log for more details on this error.
Getting same error after modofying the parameter value MAX_EXPANDED_SUBQUERY_PREDICATES to 12000
Please suggest what could be the other reason it may fail or any other settings we need to check.
Regards,
ckeng

ckeng,
Normally the IN clause has restriction of 10000 values in general sql/plsql we will go with inline queries i think model your rpd to generate inner queries
select * from emp where dept_id in (Select distinct dept_id from dept);
or have a condition/filter on sub report and make one more inner report with sub-filter but definitely it will cause performance issues.
thanks,
Saichand.v

Allow only one set of parameter values for all worksheets

I would like to " Allow only one set of parameter values for all worksheets ", but prompt before executing the worksheet. This function is a great time saver, but the users on occasion would like to change at the least one of the parameters. Is this possible? What setting do I use? I've tried various combinations of the " After opening a workbook: " on the options page. " Run query automatically", " Don't run query (leave sheet empty) ", and " Ask for comformation ". I would have thought that "Ask for comformation " was the trick, but no. I'm considering putting a do nothing parameter that has the setting of " Allow different parameter values for each worksheet. " so that it will keep all the others, default this one, but prompt for a possible change.
Any thoughts...
Thanks,
Jamie

Hi Jamie
Even though you have the same parameter for all worksheets a user can still choose what to use on a worksheet. Its just that if they click to another worksheet then that parameter will be applied.
Which version of Discoverer are you using?
Best wishes
Michael

How to use different default parameter value for different report subscriptions

In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values:
Report name – Testsubscription.rdl
Subscription-1
Input parameter (default values):
start_date = first day of current Month
end_date = till date
Subscription-2
Input parameter (default values):
start_date = first day of current Quarter
end_date = till date
I know an alternative way of doing this would be to copy the rdl file with a different name but I am curious whether this can be done within a single report definition file. I am using SQL Server 2008 R2 Standard Edition.
Thanks!
spp

Hi sppdba,
As per my understanding, there is a report with two parameter: start_date and end_date, you want to configure subscription for the report, and set different default values for start date and end date. And you want to know if it is possible to achieve you
goal by using a single report definition file.
Since you are using SQL Server 2008 R2 Standard Edition, we need to achieve your goal by configuring two subscriptions for the report. For detail information, please refer to the following steps:
1. In design surface, right click start_date and open Parameter Properties dialog box.
2. In General pane, type Name and Prompt, set Data Type to Date/Time.
3. Click Available Values in left pane, select Specify Values.
4. Click Add button, in Label text box, type “First day of Current Month”, click (fx) button in Value section, then type the expression like below:
=DateSerial(Year(Now()), Month(Now()), 1)
5. Click Add button, in Label text box, type “First day of Current Quarter”, click (fx) button in Value section, then type the expression like below, then click OK.
=DateSerial(Year(Now()), (3*DatePart("q",Now()))-2, 1)
6. Right click end_date and open Parameter Properties dialog box.
7. In Available Values pane, select Specify Values.
8. Click Add button, in Label text box, type “Today”, click (fx) button in Value section, then type the expression =Today(), then click OK.
Now that the parameters are created, we need to configure subscription for the report. For detail information, please follow these steps:
1. Open Report Manager, and locate the report for which you want to create a new subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Subscription.
5. Select the delivery extension and data source for the subscription.
6. Select a method of delivery, then choose report delivery options.
7. Specify conditions that cause the subscription to process and delivery to occur.
8. Set start_date to First day of Current Month, end_date to Today, then click OK.
9. Create a new subscription as step4 to 7, set start_date to First day of Current Quarter, end_date to Today, then click OK.
The following screenshots are for your reference:
For detail information about Creating Standard Subscriptions, please refer to the following document:
http://msdn.microsoft.com/en-us/data/ms156307(v=sql.105)
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

Import parameter value for FM RH_OM_ATTRIBUTES_READ

Hello SRM Gurus
What is the import parameters values for the function module RH_OM_ATTRIBUTES_READ to read Org.Structure parameter values in SRM 7.0 system?
Is below parameter value is correct?
PLVAR = u201801u2019
OTYPE =u2019Ou2019
OBJID = userid
SCENARIO = u2018BBPu2019
SELDATE = SY-datum
I am not able to read any data.
Kindly share your experience.
Thanks.
Preethi.

Hi
Under Object Type(OTYPE) you are entering as "O" - means Org Unit
So you need to enter Org Unit under Object ID (OBJID) and not the user Id
Hope this is clear to you now

To pass parameter values to the object reference of action step in sequence file of teststand programatically using C#.

//Initialize the Engine
            EngineClass myEngine = new EngineClass();
            myEngine.LoadTypePaletteFilesEx(TypeConflictHandlerTypes.ConflictHandler_Prompt, 0);
            Step myStep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname,StepTypes.StepType_Action);
            myStep.Name = "object";
            DotNetModule dotnetmodule = myStep.Module as DotNetModule;
            dotnetmodule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File,@"C:sequence.dll");
            dotnetmodule.ClassName = "CN";
            dotnetmodule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
            dotnetmodule.MemberName = "ISI";
mySequence.Locals.NewSubProperty("object", PropertyValueTypes.PropValType_Reference, false, "", 0);
Sequence mySequence = myEngine.NewSequence();
            mySequence.Locals.NewSubProperty(varName, PropertyValueTypes.PropValType_Reference, false, String.Empty, 0);
mySequence.InsertStep(myStep, 0, StepGroups.StepGroup_Main);
            SequenceFile seqFile = myEngine.NewSequenceFile();
            seqFile.InsertSequence(mySequence);
seqFile.Save("C:\\mySeq.seq");
I have done this,dynamically creating a sequence file in teststand programatically through c#.
Problem is
1.I created an action step and object Reference variable for the step, but i am not able to pass parameter values to the objectReference
2.I am not able to load the sequence in to the main Sequence of the sequence file in the teststand. How can I do these two things.

Hi,
have you ever followed on my Links ?!?!?
If not please jump to this one
http://forums.ni.com/ni/board/message?board.id=330&thread.id=26880
and read the the answer from Mannoch
starting with this words:
Anthony -
Currently, functionality for retrieving the Metadata Token for a class constructor or member is not fully provided in the TestStand .NET Adapter API. The DotNetModule.GetConstructorMetadataToken() and DotNetModule.GetMetadataToken() methods only return the correct Metadata Token when the member/constructor prototypes have already been loaded. Thus, in the case of your code, when you call DotNetModule.GetMetadataToken(), the method is returning -1 because the member prototype for the Step you are referring to has not yet been loaded.
That means have to do a workaround for your stuff.
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Parameter Value for SYS_CONTEXT

What are the valid parameter values for SYS_CONTEXT?

http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10759/functions150.htm#sthref1809

Parameter ID for the transaction fb03-document display

Hello,
I am applying this inquiry for one customer. Please check it below:
Could you please let us know what is the parameter ID for the transaction FB03-document display, which can be use for the default Parameter value as shown below for transaction FBL3N and FBL1N.
Parameter ID
FIT_ALV_AP
FIT_ALV_GL
Thank you!

Parameter ID in SAP is defined in user profile to default values while processing transactions ins SAP.
To find out the parameter ID for e.g. goto F-02.
Click on company code field(BUKRS). Press F1, see technical information and note down the parameter ID BUK.
Now goto SAP Easy Access screen. System> User Profile> Own Data> Parameters.
Maintain BUK with value say XXXX.
Next time you goto any transaction where you need to enter comany code XXXX will be dafaulted.
FIT_ALV_AP FI Line Items: Vendors ALV List Variant
FIT_ALV_GL FI Line Items: General Ledger ALV List Variant
Please maintain the variants that you have maintained for these parameter IDs
Rgds
Harmees

Parameter value for the Compensation Review CREVI is invalid

Similar Messages

Maybe you are looking for