Parameter window not getting opened

Hello All,
While submitting any concurrent request, the parameters window is not getting opened and because of which the system is not allowing to proceed as some of the mandatory parameters are not getting entered.
How can I resolve this?
Thanks in advance!

997274 wrote:
Hello All,
While submitting any concurrent request, the parameters window is not getting opened and because of which the system is not allowing to proceed as some of the mandatory parameters are not getting entered.
How can I resolve this?
Thanks in advance!Do you have any invalid objects in the database?
Please generate the form via adadmin or manually and check then.
Thanks,
Hussein

Similar Messages

  • View in edit window not getting updatet properly

    Hello
    I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
    Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
    I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
    Does anyone have similar problems with the view not getting updated properly?
    I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
    Greetings

    Hello again
    I made a movie of this behavior:
    https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
    It shouldn't look like that, right?
    Greetings

  • Any iviews not getting opened from the portal content.

    Hi,
    Recenlty i found that the any of the iviews of the portal content are not getting opened.When i click on any of the iviews a blank page pops up.But the iviews when dispayed in the top level navigation gets opened there.Even the personalize option in the masthead pops with a blank screen.
    Am not able to figure where the problem is exactly.Pls help.
    Regards.
    Adity.

    We are using IE-7 and as per our clients requirements the portal has to be run on IE-7.May be this may be the browser problem but what settings i need to do to make all iviews running fine.This problem was not earlier but i am seeing this since a week.And all iviews pop up with a blank screen.
    Regards
    Adity

  • My i pad is not getting open after  it bang with door no scratch has come because it was in leather cover but its not getting open kindly suggest?

    my ipad is notb getting open after  my baby had bang with the door no scratch has come but it is not switching on can  u please advice.
    i will be thankful if u provide  sufficient information.

    Hi Naveen,
    What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
    What action needs to be taken if the hostname or SID of the database server is changed?
    If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
    Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
    And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
    Eric

  • Custom screen window not getting closed !

    I have designed a screen and calling that using call screen XXXX starting at 15 5. Sreen does load up. Upon clicking close button(X mark) on the top right side, window is not getting closed.
    I have two more buttons OK and CANCEL in screen, which I designed, on clicking them screen does behave properly,
    I searched in SDN but couldnt get much help.
    Any idea what am missing ??
    Thanks & Regards
    Himayat.

    Hi Gautham,
    I already have this code in place,
    CLEAR v_ok_code.
      v_ok_code = sy-ucomm.
      CASE v_ok_code.
        WHEN 'CNCL'.
          REFRESH it_input.
          LEAVE TO SCREEN 0.
          WHEN 'TSAVE'.
          PERFORM update_table.
        WHEN OTHERS.
      ENDCASE.
    The thing is that generally for closing(X mark button on top), we dont do any explicit coding. I see some strange behaviour.

  • HT1688 i update ios 7 but it got sim loked and even i enter pin it is showing unlocking please wait but it is not getting opened

    i update ios 7 but it got sim loked and even i enter pin it is showing unlocking please wait but it is not getting opened

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

  • [OpenBox] Window not getting focus if skip_taskbar is set to 'yes'

    I have bound gmrun to ALT-F2. When I have skip_taskbar set to yes in rc.xml, gmrun does not get focus. This is quite annoying as I have manually click on it to get the focus.
    <application name="gmrun">
    <position>
    <x>center</x>
    <y>center</y>
    </position>
    <focus>yes</focus>
    <layer>above</layer>
    <skip_taskbar>yes</skip_taskbar>
    </application>
    If, however, I remove skip_taskbar as shown below, gmrun get its focus when launched.
    <application name="gmrun">
    <position>
    <x>center</x>
    <y>center</y>
    </position>
    <focus>yes</focus>
    <layer>above</layer>
    </application>
    * Same issue with mplayer/terminal - Doesn't get focus when skip_taskbar is set to 'yes'.
    Last edited by keerthi (2008-10-03 19:45:36)

    I have the same problem, but, and this part is really bad, I also mostly don't have this issue.
    So I can't help except to say I run OB 3.4.7.2 and [sometimes!] have the same issue as you.
    -dav7
    Last edited by dav7 (2008-10-04 03:49:06)

  • How to get Buddy List window NOT to open upon startup of ichat?

    I've got ichat to load automatically whenever I boot up, but I do not want the buddy list window to open when it does load. Is there a way to have ichat startup automatically whenever the system starts up, but NOT have the buddy list window thrown up onto the screen while doing so? Thanks for any help!

    Hi Ryan,
    Start up iChat.
    Close the Buddy list.
    Quit iChat.
    iChat should now remember that the window was closed when the app was shut down.
    Just ensure the Buddy list is closed when shutting down iChat.
    Ralph

  • Redo log file corupted, database not getting open

    I am Oracle Funda-1 student.
    Have install standard Oracle 9I on Windows XP pro service pack 2.
    I made some changes in sample table & given commit. So log buffer will flush to redo log file.
    Then I open current redo log file from OS & selected all junk characters [select all] & deleted same. Save the file. Causing redo file size 0KB.
    Then made more changes to table & issue commit. no errors ! every thing working file.
    Even chked V$log & V$logfile.
    Again I open current redo log file from OS & selected all junk characters [ select all ] & deleted same. Save the file. Causing redo file size 0KB.
    Then issue manual log switch. Alter system switch logfile
    I got disconnected from database & database was close.
    When I reconnected & try to open database in normal mode. Gave error saying redolog_1.log is corrupted & needed for recovery.
    Now not even allowing me clear redo group 1. with alter database clear logfile group 1. as database is not coming to open stage.
    just able to mount the database. with error rdolog_1 corrupted.
    Wasn't oracle suppose to be halted when very 1st time I corrupted redo log file.
    Why it disconnected me & got close.
    When then one use alter database clear logfile group 1.

    I may try this ALTER DATABASE OPEN RESETLOGS;
    As no backup & not multiplex.
    Still looking for explanation why database got close down instead of getting halt.
    I have found one more status in V$log, which is not given in Oracle university book or online document.
    INVALIDATED
    Which come as a result when oracle unable to switch to next on line group due to non availability of next group redo log physical file.
    SQL> select group#,members,status from V$log;
    GROUP# MEMBERS STATUS
    1 1 INVALIDATED
    2 1 INACTIVE
    4 1 UNUSED
    As matter of fact, it's only portion of a big
    document which happen to cover what you are testing
    in detail.
    I would invest time to read the document to
    understand how things work instead of getting dirty
    quick answers.

  • Firefox is not getting open

    I am using FireFox 3.6.3 version on my Windows XP desktop. Firefox was working till yesterday but today when i tried to open the Firefox i am getting the below Error with prompt.
    "firefox.exe entry point not found
    The procedure entry point setConsoleMode could not be located in the dynamic link library KERNEL32.dll"

    The actual error was "There was a problem sending the command to the program". This was the message inside the error box. The error box also shows a message "https://support.mozilla.com/questions/887286#answer-2...". I cant read anymore and can't copy any of the links or message.

  • Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

    Hi,
         Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
    of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
    when I try open Lync monitoring service from web UI, 
    http://localhost/ReportServer_LyncMonitoring/
    Web UI is opening but Reports home page is not Accessible , Getting error Like
    "An error has occurred during report processing. (rsProcessingAborted)
    Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect"
    Please help me to trouble shoot this problem.
    Thanks,
    Rajarajan.D

    Hi Rajarajan.D
    You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • ITunes destabilizes Windows, not getting support from Apple!

    Hi everyone,
    I'm posting here out of frustration, b/c the last two times I contacted ITunes support with previous issues, I received no response from Apple.
    My current issue is that the ITunes program (6.0.2.23) continually destabilizes my computer. I hope everyone will agree that it is not right that running one particular program causes problems for other programs and for the Windows OS in general.
    Please note that I am not experiencing any problems with any other programs other than Apple ITunes for Windows.
    Symptoms (always occur):
    1) After playing ITunes music files for several minutes, the audio becomes garbled and harsh-sounding. Closing the ITunes program doesn't correct the problem. Instead, all sounds and audio in Windows are garbled and harsh-sounding until the computer is rebooted.
    2) If other programs are running when Itunes is running, and the ITunes visualizer is selected from the ITunes menu with "Full Screen" checked, then all other running program windows get "moved" to my 2nd display from the primary display. Even if the other program window is minimized, when I restore it, if it was on the primary display before, it now appears on the secondary display.
    In my opinion, both of these problems should be unacceptable from the point of view of system stability.
    The only thing I can imagine is that ITunes uses a driver which hasn't been tested / verified for Windows systems with 4GB RAM, and there is a memory hole issue. I've seen memory hole issues already with other vendors (e.g. Tyan BIOS), so this wouldn't be a surprise.
    Any constructive comments appreciated!
    Thanks,
    Brad
    Tyan 2885   Windows XP Pro   4GB Ram, Matrox Parhelia, Dual Monitors

    You have not replied in full.
    Check here warranty status https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Check here for Hardware troubleshooting.
    Regarding warranty and out-of-warranty services you already have answer. Verizon will help only if they sold the iPhone.
    Incidentally in UAE
    Technical support for iPhone in this region is provided by the carrier, not Apple.
    So, Contact DU.
    Best

  • Recently my mozilla opened emails show loading problem of pages and emails in inbox are not getting opened and other folders of email also not getting loaded

    recently i have downloaded many video converter softwares. After that whenever i open my emails, I am not able to load the pages. Only it opens to inbox and when i click any mail in inbox, it opens the mail and immediately close that automatically within seconds and not able to view mail. It also displays error message on top for a second (e.g. problem in loading) same error message appears when i try to open any other folder like junk, draft etc. in the email and the folders does not open and only inbox comes back but could not open any emails. Same is the case with any picture files or such things accessed thru google search, it never opens and if opens like email, immediately closes. I tried removing and re-installing mozilla, but still the problem persists.

    You can try these steps in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • LR3 - PS CS5.1, DNGs do not get opened

    On my Macbook Pro w/OS X 10.6.8, I've got LR3.4.1, and PS CS5.1 Extended with the most recent Camera Raw update..
    When I right-click and choose Edit In on a DNG file in LR3, and select either Open as Smart Object, or Edit In Photoshop.., the DNG file is never opened in Photoshop. If Photoshop is not currently running, then LR3 will kick off Photoshop, but the DNG file never makes it into Photoshop.
    Editing PSD files works correctly.
    Things I've tried:
    Uninstalled/reinstalled Photoshop.
    Uninstalled/reinstalled LR3.
    Deleted the Photoshop.plist file.
    Deleted the Lightroom.plist file.
    I can open the DNG directly in Camera Raw and from thence to Photosohp, either via Bridge or Finder.
    I'm at a loss. I've never had this issue on Windows, where I'm coming from. The suggested fixes I found on Google are not working. I'm not sure where, if any, log files exist that might help. Any help would be greatly appreciated.
    Thanks,
    Matt

    Matt - Try the following workaround:
    Open the Preferences for  Lightroom™, manually navigate to and choose the Photoshop™ app as the “custom” image  editor. Then edit your DNGs from Lightroom™ using the new Custom setting instead of the default. LR will give you a brief message that it "knows" you have CS5, but ignore it.  Yes, this means you need to use the Custom  editor as your image editor, but what price success?
    This workaround also solved the pervasive Photoshop Camera Raw Plug-in incompability issue for me as well.
    Macbook Pro 10.5.8, 4gb RAM, CS5.1 v12.1 64bit, LR 3.5(RC) 64bit

  • R12: AP Tax Code window not getting closed

    Hi,
    When ever I open tax code window in AP(Payables>Setup>Tax>Tax Code) I cant able to close the tax code window, window gets hang, I didnt find any other way to close the window except closing the entire application.
    We have recently migrated to 12.0.6 from 11.5.10.2
    Please suggest to resolve this issue
    Regards
    Naga

    Have you applied the latest CPCs ? See MOS Doc 557869.1 (EBS: R12 Oracle Financials Critical Patches) - these patches are mandatory. If you have, pl open an SR so Support can troubleshoot. Did this ever work correctly - if so what changes have been made recently ?
    HTH
    Srini

Maybe you are looking for