Parameterized Data Selection in Scheduler Infopackage in BW

hei...is there any way that i can parameterized the data selection in the scheduler infopackage? When i wanna load the data from the scheduler, the data selection will change based on the source systems. Let say today got data in the source system, then the scheduler can auto select today's date to load the data, if let say next monday 25th of feb got data, then the scheduler will auto select the date 25th of feb and load the data from the source system to BW.
thanks...

Hi,
Not sure I understood this fully.
For each source system there would be 1 infoapckage as it is created on the datasource.
Now for your requirement you can write a routine inside the infoapckage to load the data for the current data.
Bye
Dinesh

Similar Messages

"Error Occurred in the Data Selection" while excuting InfoPackage for DataSource(ORT_PA_TRAN_CONTROL)

Hi,
Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
Thanks,
Taehoon.

Hi,
Why your using conversion routine at info pack level?
Actually conversion routine already defined for info object 0MATERIAL, general tab.
at info pack level, remove conversion routine MATN1 and don't give any selections.
First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
Thanks

Data Selection in Init Infopackage

Hi All
I want to schedule a Delta Upload on a ODS to load data to another ODS
For this i created a init load infopackage. I want to give some Data Selections for load. But in the Data Selection Tab I am unable to see any selection options
The same infopackage if i select Full upload I can see the Selection options how do i get all these selection options in init infopackage aswell.
Regards
Akshay Chonkar

Hi Akshay,
You Cant have a Dataselection option in Initiazation option, however, you if you still want to have a Dataselection option as you wish (Say Document posting date from -to) in delta from ODS 1 to ODS2. You can change the update rule for the By writting a routine or can give the create your rule for selection of your own selection. but i am not sure youcan use ranges
(From- to) in update rule.
Reward points if helpfull
Regards
Hari

Data Selection tab in infopackage

Hi Gurus
Its a very basic question but can anybody tell me what function the "data selection " Tab does in infopackage?
I know the setting required on R3 side for that but not sure why we use the data selection.
Can we use this data selection for master data as well?

Hi Kris,
Data Selection tab allows you to select: date ranges, document numbers and the like.
In order to have filds in there, you should first select in the DataSource in the R/3 side wich field could be selected.
If it is a Generic DataSource, you can do it running RSO2 transaction code.
<text removed by moderator>
Claudio
Message was edited by: Matthew Billingham

How To Add InfoObject in the Data Selection Tab of InfoPackages in 2004s

Hi Y'all!
I would like to ask how to add an infoobject in the Data Selection Tab of the InfoPackage in 2004s. It says its optional, this definintion of selection criteria for the infopackage.
My apologies, I don't understand how this is done. Surely, I would like, however, to understand how to add an infoobject in this data selection Tab of the InfoPackage in 2004s.
Can any kind soul out there (gurus) please lend me your thoughts?
Regards,
Philips

Hello Rajani!
Thank you very mcuh for that! I super appreciate it! Can you prescribe how I can do this step by step please? Where exactly in the DS can I locate this "field for selection" option in the DataSource?
Regards!
Philips

Data selection tab of infopackage

hi all,
how do we select data from infopackage if you do not want a certain value?
I wrote ABAP code to select not as:
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-option = 'NE'.
L_t_RANGE-low = 'Y'.
But I got errors. Sign 'I' with 'NE' is not allowed. Please advise.
Linda

Linda,
<b>Exclude Option won't work in the Infopackage data selection routine.</b>
You can use SIGN equals to I only and option values EQ, CP and BT.
Try append all the required values. use BT as well as eq.
If you want to permenantly exclude those to BW. you have 3 good options along with Infopackge Selection.
1. <b>User Exit in the Source System.</b>
2. Start Routine in the Transfer Structure.
3. Start Routine in the Update Rules.
all the best.
Regards,
Nagesh Ganisetti.
*assign points if it helps.

Mandatory data selection field in infopackage

Hello together,
Do you know how to mark as mandatory one filed from data selection tab in the infopackage? I would like the load not to start if the field is not filed.
Thank you,
Iuliana

You can update the table RSOSFIELDS for the datasource by writing an abap code like this
tables ROOSFIELD.
Update ROOSFIELD set SELECTION = 'M' where
OLTPSOURCE = '<your datasource name>' and
FIELD = '<field on which mandatory selection is needed>'.
Regs
Gopi
Assign points if it helps.

BW : Data selection customizing in InfoPackage

Hi everybody!
In BW, RSA1, I have an infopackage, that I run monthly.
It's not a delta.
I have a field "month" in the data selection tab.
This value should be the same as the loading month.
Is there a way to fill the field with an external routine ?
Thanks a lot for any reply.
François Leyssenne

Thanks a lot!
I never saw that stuff, yet it seems very very usefull!
François

Does the data selection on an infopackage only allow a range

Will the data selection tab on an infopackage allow for multiple single values or just a range? I have a routine that loads speciific plants. I'm not getting an error but when I run the infopackage but it seems to be grappbing data for all plants

It will allow multiple selections..
You need to place the cursor on the required object in the data selection field, and then click on + (Plus) icon at the bottom this bill bring one more entry for the same object.
Like this you can make multiple times to maintain the multiple Selections..
Hope this helps..

Problem in giving data selection while scheduling init

Hi All,
We did repair full data upload from 1 DSO to 4 cubes based on different conditions.
For example:
We have loaded the data in one of the cube ZPCAC_C01 with selection condiition 0ORIG_PCA = 02.
Now we want to run the delta with the same seletion condition; we run the repair full for the particular cube.
For example:
We want to run the delta for the cube ZPCAC_C01 for the selction condition 0ORIG_PCA = 02.
We are trying to run the init with the selection condition but when we choose init with/without data transfer; ALL THE SELECTION CONDITION GET DISABLED.
It is necessary to run the init with condition; if we want to run the delta with the same condition.
Unfortunatly, it is disabling the the data selection tab when we choose init.
Note: We have already deleted the init that has been done before.
Please let us know the way how can we run the selective delta in this case.
-Ravi

Hi Ravi,
First this is not correct forum for your question, please post your question in correct forum to get more and correct answers.
Ok, you are loading data from DSO to 4 cubes. You did full upload from DSO to Cube right? so what ever data in DSO will upload directly into cube by DTP running (if you do this in BI 7).
Is your cube has datasource to extract data or only getting data from DSO?
If it is getting data only from DSO, then you have run Init and delta on DSO and then update data into cube.
If your cube has datasource directly then run run Init withdata transfer and then run delta with selection condition.
Thanks.

Date error while scheduling infopackage

Hello Friends
I am facing a pecular problem.
Some time back we had taken a backup from production to quality system. I have loaded the data with the option "initialization without data transfer". It is successful. After that we are loading deltas and in this time it is showing errors such as
1) selection condition replaced by last init selection conditions.
2) incorrect start date 20.09.2004 start time 02:10:00
what am i suppose to do in this case?
Need ur valuable suggestions.
Regards
rohit

Hi
From which data sources are you loading data..I think it is from some copa related time stamp problem..Please bit eloborate on this issue
Thanks
Teja

Data Selection in Infopackage not picked.

Hi,
I have a generic datasource. I have data selections in the Infopackage. Say, I have Data selection for Plant as "5000". But, data for all Plants are getting pulled for all Plants. Why is this Selection not picked ?
Thanks.

hi, what type of datasource is yours.. is the selection parameter handled in the definition of ur datasource?

Data selection in infopackage to exclude 3 values

Hi,
I want to exclude 3 values for ZCOUNTRY field in the data selection of an infopackage. I don't want to do this using start routine(in transfer structure or update rules). I just need to do the coding in infopackage level. Can anybody plz tell me the ABAP coding for this in detail?
Thanks,
Chandan

Hi,
correct, but once you have defined an ABAP routine in your IPack for the country (select type 6 "ABAP" in the IPack selection of the country) why not to exclude the countries directly?
I've never had this req but the hereunder should work (it should exclude countries US and CA from the selection)
data: wa_range LIKE rssdlrange.
READ TABLE l_t_range with key fieldname = 'COUNTRY'.
MOVE l_t_range-iobjnm TO wa_range-iobjnm.
MOVE l_t_range-fieldname TO wa_range-fieldname .
MOVE 'E' TO wa_range-sign.
MOVE 'EQ' TO wa_range-option.
MOVE 'US' TO wa_range-low.
CLEAR l_t_range-high.
APPEND wa_range TO l_t_range.
MOVE 'CA' TO wa_range-low.
APPEND wa_range TO l_t_range.
p_subrc = 0.
hope this helps...
Olivier.

ABAP Routine in the Infopackage data selection

All,
I have requirement where i need to write a routine on a Date field(Activity Year Month) which has to return values from the first to the last day of the Previous month in the data selection of the infopackage.
I know that on Date there is a STD that can be used but my requirement is on Year Month.
there are 3 vartypes available
5. free temporal selection
6. ABAP routine
7. OLAP variable
when i pick ABAP routine it asks me to create a routine i need some help with the code here
Can someone help.
Thanks

Hi there
If the Data field is 0FISCPER you can use the OLAP variable 0P_PRFP1. If you have developed the field yourself i think you need to write code. The code could look something like this.
DATA: sysdat TYPE d.
sysdat = sy-datum.
sysdat4(2) = sysdat4(2) - 1.
IF sysdat+4(2) = '0'.
sysdat+4(2) = '12'.
sysdat(4) = sysdat(4) - 1.
ENDIF.
CONCATENATE sysdat(4) '0' sysdat+4(2) INTO l_t_range-low.
MODIFY l_t_range INDEX l_idx.
p_subrc = 0.
This code returns the previous months as a single value.
Chris

Abap Routine for Date selection in Infopackage

Hi
I have to write an abap routine for date selections in the infopackage,
There are two date begda and enda.
Do i code for BEGDA and fill in the begin date using routine and use another routine to fill the ENDA.
JPJP

Hi JP,
If you have two info objects BEGDA and ENDA in the Info package for selection
then you will have to write seperate routine for each of them.
If you want to give single value for each date field then update only the field l_t_range- low otherwise if you want to give range then you can update the internal table fields l_t_range-low and l_t_range-high .
Regards,
Prakash

Parameterized Data Selection in Scheduler Infopackage in BW

Similar Messages

Maybe you are looking for