Parameters for ICM and Dispatcher

I understand that icm/min_threads can open minimum threads for active connections during startup.
However, it is possible that one particular user has opened multiple sessions for accessing an application (or if application has directed him to another link that opens new session); in this case, that user will occupy more than one threads.
Is it possible for us to limit the threads created by user to say around 2-3 threads in ICM / Dispatcher ?

Hi Jay,
You will never need 3000 threads for 1000 simultaneous users.
Real life users spend most of their time in front of a web browser screen "sleeping".
Threads are used only when the user clicks on something.
I have currently an HR web dynpro application running on my ECC 6 system. This application must be used this month by all the  company employees  (9000 +). Currently we have more than 1000 users per day.
If I look at my SAP Web dispatcher, I get the following results :
Created Treads:               current 11     peak 20  maximum 120
Connections used:           current 15     peak 51  maximum 8000
Queue entries:                 current 0       peak 6    maximum 10000
On my 6 ECC6 app servers, I have 10 ICM threads on each and the number never increased.
Regards,
Olivier

Similar Messages

  • Parameters for substr and dbms_lob.substr

    The syntax for substr in SQL functions and for the function in dbms_lob package is not matching and hence confusing for programmers. It will be less confusing if parameters for both functions are of the same order.
    In Sql functions the the syntax for substr is substr(string, offset, amount)
    In dbms_lob package the syntax for the substr function is dbms_lob.substr(lob_loc, amount, offset)
    Mohan

    I think he wants to send a suggestion to Oracle via this forum.

  • Time out parameters for ABAP and JAVA instance

    Hello All,
    We are looking for Time out parameters for our ABAP and JAVA instances.
    As users are complaining that they are getting time out error
    while they are trying to access Cprojects from Portal.
    I was able to check/collect the ABAP instance parameters from SMICM Tcode.
    Can anybody tell me which parameters we need to look for JAVA instance.
    Thanks in advance.
    Regards,
    Amber S

    jstart/shutdownTimeout
    (jstartup/shutdown_timeout)
    Specifies the shutdown timeout, i.e. the grace period for the AS Java instance to shut down before the Java process terminates itself.  Unt is in Seconds. Default is 120
    j2ee/ms/connectTimeout
    (jstartup/wait_for_scs)
    Specifies the timeout for the first connection to the message server. The AS Java instance fails to start if this timeout expires.Unt is in Seconds.Default is  60
    j2ee/ms/reconnectTimeout
    (jstartup/wait_for_reconnect)
    Specifies the timeout for the reconnecting to the message server.The AS Java instance shuts down when this timeout expires.Unt is inSeconds.Default is  3600 (one hour)
    Thanks

  • Recommended JVM Parameters for Master and ClientManager (v 6.1.0)

    What are the recommened JVM parameters for a master and client manager running on the same Linux machine?
    Current VM Specs:
    OS: Suse Linux
    Processor Count: 4
    Physical Memory: 8GB
    Using Java: jdk1.6.0_13
    Current Master Params: JVMARGS=-Xms2048m -Xmx2048m
    Current Client Manager Params: JVMARGS=-Xms2048m -Xmx2048m -XX:PermSize=128m -XX:MaxPermSize=128m
    Recommendations would be appreciated.
    Thanks!
    Grant Alexander

    What are the recommened JVM parameters for a master and client manager running on the same Linux machine?
    Current VM Specs:
    OS: Suse Linux
    Processor Count: 4
    Physical Memory: 8GB
    Using Java: jdk1.6.0_13
    Current Master Params: JVMARGS=-Xms2048m -Xmx2048m
    Current Client Manager Params: JVMARGS=-Xms2048m -Xmx2048m -XX:PermSize=128m -XX:MaxPermSize=128m
    Recommendations would be appreciated.
    Thanks!
    Grant Alexander

  • Configuration steps for ICM and ICF for WebDynpro

    Hi Experts :
    I am new to WebDynpro, I have created one application (a very simple one, with assistance from net). But when I am trying to run this one, I can oly see "Can not display this page". I think there might be some ICM and ICF configuration is required for this.
    Can any one, help me regarding this.
    Thanks,
    Kuntal

    >
    Kuntal Nandi wrote:
    > Need to add the IP address in host file.
    You know you really shouldn't need to do that.  Sometimes you see that suggestion if this is a temporary sandbox or trial system installation; but for a real ABAP AS, it would be rediculous to go around to every client machine and add the IP address to the host file.  The real solution is to have your network administrators do their job and setup a proper DNS entry for the server.
    Telling someone that they should add their server IP address to every client's host file is like telling someone with an amputated arm they just need to put a bandaid on it. Just silly!
    So the short answer is that the majority of these steps should be on the server.  There are some suggested settings for your browser to control security and error reporting; but the critical configuration steps on the server are all listed in the help document I linked to earlier.

  • Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

    Hi All,
    1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
    --- Seeburger Workbench
    --- Seeburger Mapping Designer (BIC)
    --- Seeburger Counter and Varaibles
    --- Seeburger AS2 Spoke
    --- Any other Seeburger Component setting required
    I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
    2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
    3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
    Regards

    Hi Rickkk,
    1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
    --- Seeburger Workbench
    --- Seeburger Mapping Designer (BIC)
    --- Seeburger Counter and Varaibles
    --- Seeburger AS2 Spoke
    --- Any other Seeburger Component setting required
    For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
    /people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
    2
    2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
    For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
    3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
      The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
    Thanks,
    Ram.

  • Silent Install Parameters For Reader And Flash Player

    Does anyone know the silent install parameters for Adobe Reader and Flash Player? I actually need the download link for the offline installers and the parameters for those installers. Thanks!

    You probably also need a distribution license, then.
    http://www.adobe.com/products/flashplayer/distribution3.html

  • Different Parameters for Walls and  Logical views

    Hi,
    We have implemented Managment Cockpit  in BI 7.0/SEM 6.0.
    We have one Cockpit, with four walls ane two Loigcal view in each wall.
    At present we have selection parameters (profit center hierarchy node) at the cockpit level.
    Business requirment is to have further parameters at Wall and Logical view level.
    Can you please suggest how this can be done?
    Regards,
    UR

    Closing as no answer for longtime

  • Using wildcard parameters for MDX and RSQL queries

    Hi,
    Passing parameters to MDX and RSQL queries works,but is there a way we can pass wildcard(%) parameters to MDX and RSQL
    Thanks,
    Hari Devarapalli

    Hari -- Try this Instr function -
    http://publib.boulder.ibm.com/infocenter/dzichelp/v2r2/index.jsp?topic=/com.ibm.dwe.cubemdx.doc/mdx_instr.html
    Thanks,
    Venkat

  • Parameters for Yield and Scrap quantities in BAPI MB_CREATE_GOODS_MOVEMENT

    Hi All,
    I am using BAPI MB_CREATE_GOODS_MOVEMENT and MB_POST_GOODS_MOVEMENT to carry out the confirmation and Unplanned Goods Reciept.
    Which parameters in MB_CREATE_GOODS_MOVEMENT i have to use for passing Yield and Scrap quantities.
    And from which table i can fetch the Material for the Order? Can i use AFKO for the material number.
    Please give some inputs on how to use these Function Modules.
    Can i use only MB_CREATE_GOODS_MOVEMENT for the confirmation.
    Thanks,
    Anil.

    Hi,
    I presume you are referring to production order confirmation. Refer these:
    BAPI_PRODORDCONF_CREATE_ACT    Enter activity confirmation
    BAPI_PRODORDCONF_CREATE_HDR    Enter Order Confirmations
    BAPI_PRODORDCONF_CREATE_TE     Enter Time Event Confirmation
    BAPI_PRODORDCONF_CREATE_TT     Enter Time Ticket Confirmation
    Regards

  • FCC parameters for  header and item

    Dear All,
    I am working on a File to RFC scenario. The file has the PO deatils from which Salesorder has to be created in R/3. Am using the BAPI BAPI_SALESORDER_CREATEFROMDAT1 to create salesorders. I have tested the scenario with XML message - it is working file .
    The problem is with FCC.
    The structure of the file is as follows
    PO number,podate,deliv. date,cust. material,quantity,receiving point
    message type:
    -->MT_messagetype
    >input
    >header
                    po number
                    po date
                    deliv date
    >item
    >item
                         cust_material
                         quantity
                         receiving point
    >partner
    >partner
                         dummy field.
    input is the recordset
    i have to get the first 3 fields from the file inlto header and the rest into item.
    i have created a dummy field in partner because I am mapping a constant value to sold to party in partner node .
    what should be the FCC parameters ?

    After looking at your structure which is comma separated and doesn't have any keyfields it will be difficult to content convert it into different nodes like header and item.
    I was looking at using fixed field lenght's along with field separator to split the structure, as the first 4-5 fields of u r row seem to be standard structures which will have fixed length, but then your last field "receiving point" is not a of fixed length.
    so as long as my understanding goes you will have to content convert the input into a flat xml structure like this:
    <input>
              <header>
                  </po number>
                  </po date>
                  </deliv date>
                  </cust_material>
                  </quantity>
                  </receiving point>
            </header>    
    <input>
    Recordset name - input
    Recordset structure --header,*
    FCC
    header.fieldNames -- po_number,1,po_date,1,deliv_date,1,cust_material,1,quantity,1,receivingpoint,1
    header.fieldSeparator -- ','
    header.endSeparator -- 'nl'
    Since in your scenario looks like you are creating  one sales order per row of file, the above structure should do the job for you.
    Cheer's

  • Profile Parameters for Logon and Password (Login Parameters)

    I've upgraded SM3.2 to SM4.0 and now users can create password with 40 characters. I want to return to max 8 letters in password and to big letters in password. I' haven't found appropriate parameter. Does parameter login/password_downwards_compatibility provide me compatybility to old login parameters?

    Hi,
    Also follow the following
    /people/sap.user72/blog/2005/10/19/attention-security-administrators-new-password-rules-are-on-their-way
    After SAP NetWeaver 6.40, the password hash algorithm is changed from MD5 to SHA-1. This means that more secure hash values, which are not backward-compatible, and which make reverse engineering attacks difficult, can be generated. By default, new systems generate two hash values: a backward-compatible value and a new value. However, you can configure the system so that only the new hash value, which is not backward-compatible, is generated. You can set the degree of backward compatibility with the profile parameter login/password_downwards_compatibility.
    The system can determine the type (new or old) of the current user password at any time. During logon, the system calculates the password hash based on the entered data and in accordance with the information from the user master record (see the hash procedure used) and compares the hash values. The system decides itself which part of the entered password is evaluated.
    · If the user master record shows that the user’s password was encrypted with the old password hash algorithm, the system only evaluates the first eight characters and converts these to upper-case
    · If the user master record shows that the user’s password is encrypted with the new password hash algorithm, the system evaluates all characters as they were entered (up to 40 characters, with no conversion to upper-case).
    The new functions do not initially have any consequences after the upgrade; the operation of the system and password queries continue to run as usual. The passwords of the new type gradually replace the passwords of the old type.
    Do reward with points.
    REgards.

  • How to Set NLS parameters in SqlDeveloper for current and future connection

    Hi
    I've downloaded sqldeveloper version 1.5.4(build main-5940)
    when I try to set NLS parameters as following it is thrwoing following error
    TOOLS->PREFERENCES->DATABASE-->NLS parameters
    on right side pane
    I've changed
    SORT----->BINARY_CI
    COMP----->LINGUISTIC
    then it is generating following log file
    SEVERE     43     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:ORA-00600: internal error code, arguments: [qctosop:like transform], [], [], [], [], [], [], []
    SEVERE     44     114     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     45     7     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     46     9     oracle.dbtools.db.DBUtil     
    SEVERE     47     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     48     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     49     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     50     0     oracle.dbtools.db.DBUtil     
    SEVERE     51     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     52     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     53     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     54     0     oracle.dbtools.db.DBUtil     
    SEVERE     55     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     56     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     57     4     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     58     0     oracle.dbtools.db.DBUtil     
    SEVERE     59     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     60     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     61     4     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     62     1     oracle.dbtools.db.DBUtil     
    SEVERE     63     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     64     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     65     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     66     0     oracle.dbtools.db.DBUtil     
    SEVERE     67     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     68     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     69     6     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     70     0     oracle.dbtools.db.DBUtil     
    SEVERE     71     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     72     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    please help me to set NLS parameters for current and future connections.
    thanks,
    harry

    Hi -K-
    actually I want to make SqlDeveloper to make case insensitive search.
    when I google, I've found to make oracle as case insensitive I need to set NLS_SORT to Binary_CI and NLS_COMP to LINGUISTIC
    Default SQLDEVELOPER NLSParmeters values are as NLS_SORT---->Binary and NLS_COMP--->Binary
    Now I want to make these as NLS_SORT---->Binary_CI and NLS_COMP--->LINGUISTICS.
    thanks,
    harry

  • List of all service parameters for Integrated ITS

    Hi,
    I am looking for the complete list of service parameters for Integrated ITS, with explanation about each of them. Ex: ~command, ~sap-user etc. I have tried searching in help.sap.com and in this forum and SDN blogs. I could find only some of them. I am not looking for anything particular right now. If I have the complete list it would help me to refer the list if I need any one in particular.
    I would really appreciate if anybody can help me in this search.
    Thanks & Regards,
    Sudhakar.

    Hello Sudhakar,
    The best location for ITS Parameter documentation is the online SAP Library at http://help.sap.com/saphelp_nw2004s/helpdata/en/54/4d9993c6592941a407313a6763575c/frameset.htm
    Here under "Configuration" you will find a list of parameters for developers and administrators.
    Edgar

  • Wrong parameters for multiple targets mapping started in Control Center

    Dear experts,
    I'm newbie for OWB and I got into the following error when I try to start the loading of one my mapping that consists of 2 Cubes as targets:
    INVN_HIST_MAP
    Error
    ORA-06550: line 1, column 847:
    PLS-00306: wrong number or types of arguments in call to 'MAIN'
    ORA-06550: line 1, column 841:
    PL/SQL: Statement ignored
    When I check the the package Main Procedure, I found the number of parameters for 'TRUNCATE_LOAD' and 'AW_EXECUTE_RESULT' doubled compared to the other mappings I have which consist of one target cube only. That explains why I got the error above. My question is whether there's any way to get the Control Center loading work?
    Many thanks!

    Thanks for the reply David. I'm using OWB 10.2.0.4. Is this a known bug? I don't mind splitting into 2 mappings. My only concern is that ~60% of the data processing are overlapping. I'm using MOLAP. Is there a way to share staged table data on 2 different mappings?

Maybe you are looking for