Parameters n95 for wifi connection?

hi ,please anyone had a kind heart to solve my problem, got a problem with the wifi connection, and i tried to many times, got always no gateway!! if anyone can help me pls!! i want a good suggestion for the parameters thanks in advance

Hi,
settings of WiFi are automatic. Device is searching for WLan and there are to possibilities;
1)wlan without authorisation code - this means, you don't need to know any access code, if signal is strong enough, device will connect with net and you can browsing.
2)wlan which needs authorisation code - connection is possible after giving a security code. If you don't know such a code, you can not go in.
Sometimes even if access is public, signal can too weak or too many ppl are using it in this same time for effective connection.
You should try to find wifi in some shopping center with cafe, restaurant, where are many open wifis, if you couldn't connect there, it would mean, that there is something wrong with your wifi module.  
Good luck
N95 & N96 User

Similar Messages

  • WRT54GS Access Restriction for WiFi Connected Devices

    I have the WRT54GS v4 running with the latest Firmware Version: v1.06.3 -- I am attempting to add Access Restrictions for a few MAC addresses and IP addresses (my kids iPod Touch and laptop).   
    I am simply wanting to deny total internet access from 9pm to 7am.   I have gotten it to work but ONLY for computers that are actually plugged into the router (cat 5 internet cables).  All the computers/devices that connect to the router via wifi do not seem to be restricted at all.   I am thinking this is an issue with the router in that it ONLY seems to apply the Access Restriction rules to those devices that are actually directly connected by hardwire.
    Has any one else noticed this issue for WiFi connected devices?  Access Restrictions do not seem to apply to WiFi connected devices.
    Please help -- I would hate to have to buy another router.

    Are you sure you have enter the correct MAC address or IP address? Wired connections use different MAC and IP addresses then wireless connection...

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • Workplace won't give me the password for wifi connection

    My place of employment refuse to give me the password for wifi connection. Is there anyway around this?

    Nothing legal. They do add password access for a reason.

  • N95 8BG "WiFi Connection problems" and "Web: no ga...

    Like many users, I could not get my new Nokia (N95 8GB) to work with my WiFi. After many attempts, using the various ideas posted, I came up with a solution that works reliably for me.
    First lets deal with "WiFi Connection problems"
    Menu/Tools/Settings/Connection/Wireless LAN
    'Show WLAN availability' = 'Yes'
    'Scan for networks' = 'Every 5 minutes'
    Some users have suggested choosing 'Advanced Settings' from the 'Options' menu, changing 'Automatic configuration' to 'Disabled' and the either setting 'RTS threshold' to '2346', or setting 'Power saving' to 'Disabled'. I tried both of these but they did not make any difference in my case. However they may make a difference for you, hence their inclusion here.
    Menu/Tools/Settings/Connection/Access Points
    Choose 'New access point' from the 'Options' menu
    'Data bearer' = 'Wireless LAN'
    'WLAN network name' = If your network is set to broadcast its SSID, use 'Search for networks' then select your network from the list, otherwise use 'Enter manually' and type in the SSID.
    'Connection name' = anything you like, but I use the SSID
    'Network status' = not sure about this maybe someone can confirm, but I think if the SSID is broadcast then it is 'public', otherwise it is 'private'.
    'WLAN network mode' = match this to your access point configuration. Mine is set to 'Infrastructure', so I do not cover the ad-hoc scenario here.
    'WLAN security mode' = again I am using WEP so have not covered other scenarios.
    'WLAN security settings' = these should match you access point configuration.
    'Homepage' = whatever you like. I use 'http://www.google.co.uk', just so that when I start browsing I get something reliable, useful, and dependable. If Google fails to appear it usually means there is something wrong with your config.
    Now lets handle the dreaded "Web: no gateway reply"
    Menu/Tools/Settings/Connection/Access Points
    Scroll down to highlight the new access point and choose 'Edit' from the 'Options' menu. Now choose 'Advanced settings' from the 'Options' menu.
    Assuming you network used IPv4, which most do in my experience, select 'IPv4 settings'. I don't know about IPv6, and don't use a proxy so these are not covered.
    The values you enter in 'IPv4 settings', depend upon your network/router settings, and whether you have a DHCP server or not.
    Assume your a router IP Address, on the LAN side, is 192.168.0.1, and that it has a DHCP server set to serve addresses in the range 192.168.0.64 to 192.168.0.192, using subnet 255,255,255,0. Since the mobile does not seem able to get an IP Address from the DHCP server we give it a static address 192.168.0.55. Notice this is outside the range sereved by te DHCP server to avoid conflicts.
    We end up with:
    'Phone IP address = '192.168.0.55'
    'Subnet mask' = '255,255,255,0'
    'Default gateway' = '192.168.0.1'
    'DNS address' = 'user defined'
    'Primary DNS address' = '192.168.0.1'
    'Secondary DNS address' = '0.0.0.0'
    I used something similar and was at last able to browse the web via wifi.
    I hope all of the above helps someone out there.

    I have just experienced this problem having been using the WiFi network for months without problems. I tries all the suggestions on these forums including the power settings, turning off WEP, and the fixed IP suggestion and none worked. I even reinstalled the firmware and reconfigured everything. It turned out to be the router. I had rebooted it several times to no effect but the DHCP always gave the N95 the same IP address lease. So I changed the range of IP addresses the DHCP could lease and restarted the N95. It got a new IP and was back working again.
    If at first you don't succeed, try again. Then quit. There's no use being a damn fool about it.
    -- W.C. Fields

  • I just got a new ipod and i dont know how to use it. it keeps asking me for wifi connection or to log on to itunes. i logged on to itunes but its still not working please help

    please help me use my ipod touch. i just got it and im a little confused on how to use it. it keeps asking for a wifi connection even while im logged in on itunes

    iPod touch User Guide (For iOS 5.1 Software)
    Are you connected to wi-fi?
    If not, then connect.

  • TS2756 does it matter if you have att iphone hot spot but verizon ipad for wifi connection

    does it matter if you have att iphone hotspot but verizon ipad for wifi connection

    If you are wanting to use the Verizon iPad as the hotspot you will need a Verizon plan.
    If you are going to connect your Verizon iPad to your iPhone AT&T hotspot via WiFi it makes no difference at all.

  • How can i remove un/pw for wifi when teachers use their own logins for wifi connection.

    I work at a public school district and each of our teachers have ipads. They user their usernames and passwords to connect to our networks wifi. I am needing to remove the username and password of last years teachers so the new teacher can sign in with theirs. I tried the suggestion of: Settings, General, Reset and Reset all Networks but when I go back i to sign into the wifi connection it is still automatically connecting to the previous users.

    Have you talked with your networking it specialist?  Perhaps the router is keying off the MAC address.
    Robert

  • Security for WIfi connection

    How would I lock my Wifi connection to prevent other close outside computers from using it?

    https://customer.xfinity.com/help-and-support/internet/wireless-gateway-username-and-password/

  • Airport Extreme username AND password for wifi connection...

    How can I connect to a wireless network that requires both a password AND username with an Airport Extreme?
    Some wifi areas in the UK such as BT Openzone homehubs require both a username and password to connect to the network, not just picking a network and add a password.
    Can anyone help?
    Thanks!

    Thanks, this solved my problem. Network kept demanding username; I guess it's different from the computer ID I use. Whatever, it wasn't easy to find the network listed, but by trial and error, I found it, highlighted it, and pressed delete key. Now the network only asks for password, which I knew, and I'm on. Great advice. But why computer was configured to do that in the first place is why I prefer PC to my wife's inscrutable macbook pro.

  • Help needed for WiFi connection problem

    Hello
    My wife's iPad2 with current iOS 8.3 sometimes will not connect to Wi-Fi - any ideas on how to correct the problem?
    It's inconsistent! 
    Thanks for any thoughts about this.
    David

    If you want to do this in sql you've to use dynamic sql to select only columns having the data.
    And you can always use end user tools like SSRS to display only columns having values by using expression for visibility property.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
    Visakh16-
                    Can you please help me on how can I achieve this using SSRS. 
    Thanks.
    Hi Mutali,
    Personally, I don't recommend using SSRS.
    If you want to design a SSRS report,you should retireve all columns and specify column visibility for each column with following expression.
    =IIF(Fields!SomeFieldValue.Value > 0, True, False)  (Note:Supposing the data type of the field is INT).
    You can refer to the solution as
    Jingyang Li post above.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • My ipod 4th generation isnt scanning for wifi connections any help?

    yes apple i need some help with my ipod it hasnt been scanning for my wifi router for days and im worried any help?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Is this the problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • I changed my password for wifi connection and now my wifi won't connect.

    I have an Osprey mini. Last night I needed to connect a new device to the wifi but couldn't find the card with the network password, so I got to my account online and changed the password. But when I try to connect, it says the password is incorrect.

    I am not sure that you changed the correct password, online credintials usually are seperate/different from wifi ones. Please check the quidelines on http://ee.co.uk/help/phones-and-device/ee/EE-Osprey-2-mini to see how to solutions. I hope this helps.

  • Change hostname for wifi connection

    Ave forum!
    I need your help to find out how to change device name, so when I look at my WiFi DHCP Server I could recognize my device. I still can do this by MAC, but would like to know how to change system name in Windows Phone.
    I am using LUMIA 800
    Thanks

    Hi,
    Welcome to the forum!
    Connect your Lumia Phone via USB to your computer running the Zune PC software. Once the phone shows as connected in the Zune, do the following:
    Click on the Phone status icon.
    Select View Sync Options > Name Your Phone.
    Enter the required phone name.
    Click OK, and close Zune.
    Disconnect your phone from the PC.
    Hope this helps. 

  • White X for wifi connection

    Recently moved my computer and I cannot get it to connect to wifi ever since.  Possible interference from grandchildren???  Not sure.  What appears is a white x where the wifi symbol should be.  Can you suggest some trouble shooting tips?  Thanks!

    The first place to start is by System Preferences - Network - Assist Me.
    Becasue you did not complete a Profile I don't know the version of OS X installed, if you are running Mavericks then the above suggestion will work. If not you may have to look a little further.

Maybe you are looking for