Parameters to stored procedure from sender JDBC

Hi,
I am using the JDBC sender adapter to call the Oracle stored procedure. Oracle version is 10.2. hence I m using function call using select.
My concern is, how to pass the input parameter to Oracle function from JDBC sender.
Regards,
Kavita

Hi Kavita,
I am using the JDBC sender adapter to call the Oracle stored procedure
Unfortunately, the sender JDBC adapter does not support Oracle's stored procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
Executing an Oracle Stored Procedure from Sender JDBC adapter
[Not sure about latest versions of Oracle]
can I pass the input parameter to this function? 
In my opinion, No
If not, I need to change the approach, and need to use receiver JDBC[as need to pass input parameter]. 
This could be possible but havent tried it
Can JDBC Receiver adapter support stored procedure for Oracle[10.2]
Yes
Regards,
Prateek

Similar Messages

Executing an Oracle Stored Procedure from Sender JDBC adapter

I could really use some help from someone who had done this before.
I've read the help about using the JDBC sender adapter, but it's not helping enough.
I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
That's definately what we want to do, but we can't figure out the syntax.
The procedure in oracle looks like this:
CREATE OR REPLACE PROCEDURE test_ref_cursor
( cur_generic IN OUT result_sets.cur_generic)
as
BEGIN
Open cur_generic for
select
 proposal_number,
 to_char(sequence_number),
 column_name,
 column_value,
 update_timestamp,
 update_user
 from
 coeus.sap_test;
END test_ref_cursor;
And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure? Or is there something wrong with the procedure that is causing the error?
I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.

Hi Vanda,
Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
There are 2 possible ways you can accomplish this:
1. Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
2. Develop a user-module for the adapter, which can be used with a sender adapter.
Thanks
Prasad

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

DB2 Stored Procedure from Java-JDBC

Hi All,
I am using DB2 stored procedure which have been written in COBOL. I have two types of stored procedures. First types of stored procedure takes IN parameter and returns OUT parameter. These stored procedures are working fine. The second type of stored procedure takes IN parameter and returns a CURSOR. According to Database team (who wrote these stored procedure) claims that they can see data in a cursor when they test these stored procedure directly in the database. However, when I run these stored procedures from Java code it returns NULL ResultSet. Here is the code:
public SearchResult getAllBenefitHEDType(SearchParameter searchParam) throws DAOException {
log.debug(" getAllBenefitHEDType method - entering ");
HashMap searchParametersMap = searchParam.getHashMap();
SearchResult searchResult = new SearchResult();
String type = (String) searchParametersMap.get(UDFConstant.LOOKUP_SEARCH_TYPE);
HashMap resultParametersMap = new HashMap();
ArrayList resultSetDTO = new ArrayList();
try {
conn = this.getConnection();
conn.setAutoCommit(false);
System.out.println("getAllBenefitHEDType Step 1");
CallableStatement cs = conn.prepareCall("{call TEST.APS003(?)}"); // Stored Procedure with one IN parameter.
cs.setString(1,type);
boolean retVal = cs.execute(); // this should return true if ResultSet is available.. in my case it is returning false.
// I tried with getting the Object
ResultSet rs = (ResultSet) cs.getObject(1); // this should give me a valid result set ... in my case I am getting null
if (rs!=null) {
System.out.println("getAllBenefitHEDType Step 4A Result Set Not Null");
} else {
System.out.println("getAllBenefitHEDType Step 4A Result Set Is Null");
// I tried getting the resultset
ResultSet rs1 = cs.getResultSet(); // this should give me a valid result set ... in my case I am getting null
if (rs1!=null) {
System.out.println("getAllBenefitHEDType Step 4D Result Set Not Null");
} else {
System.out.println("getAllBenefitHEDType Step 4D Result Set Is Null");
while (rs.next()) {
System.out.println("getAllBenefitHEDType Step 5");
LookupDTO lookupDTO = new LookupDTO();
// the following code populate the Lookup DTOs from ResultSet.

A few comments...
1) Creating tables, particularly tables whose names seem to imply that they are temporary tables, on the fly in a stored procedure is a bad idea. That is not the way to work with Oracle, though it is a common practice in other databases like SQL Server. There is undoubtedly a better way to do this in Oracle if you can explain what you're trying to accomplish from a business standpoint.
2) If you are going to use dynamic SQL, you almost always want to use bind variables, not literals. One of the quickest ways to kill an Oracle database's performance is to not use bind variables.
3) As has already been mentioned, assuming FH_INICIO is a DATE column, you need to put an explicit TO_DATE around your strings in order to convert them to dates. Otherwise, Oracle's implicit cast depends on the session's NLS_DATE_FORMAT, which is likely to be different in different client applications and from different client machines.
Justin

How to use Stored Procedures in Sender JDBC Adapter.

Hi Experts,
 we are having a lot of legacy application which are on .Net. basicaly using MS SQL & stuff. As a Integration scenario we have to triggered some events from JDBC to XI. How can i do this. Secondly there are multiple tables from which i will be selecting a record & sending it to XI for further processing the Receiver Side we are having SAP system.
 How can i use a Stored procedure in XI Sender Adapter ?
 Can anybody tell me step by step how to get the XSD of Stored procudere & used in XI. ?
 I am new to XI. I have not yet configured any sceneario.
 Can anybody guide me step by step how to do this.
 I am only intersted in Sender Side configuration.
Regards,
Umesh

Hey,
check this in the JDBC Sender Adapter Configuration
Query SQL Statement -> Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
JDBC adapter
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

Stored procedure in Sender JDBC Adapter

Hi All,
My Scenrio goes like this ...
Stored Procedure(SQL Server) --- PI -
File
I need to write the results of stored procedure to File.Here I don't need any mapping.So how many DT , MT and MI need to be created?
The interface need to run by 6AM from Monday to Thrusday, how can i achieve this ?
Stored Procedure has only select statement and no Update statement , but it takes Date as Input parameter , so what i need to provide in sender JDBC adapter.
Thanks,
Monish

Hi Monish,
As per your requirement it is JDBC to File. Please be careful with the structure to be created for sender JDBC. I am unable to understand why you donot require a mapping for this. How XI will send the data to a file then.As per my knowledge if it's file to file and just pick and drop then we can neglect IR and go for ID.But here you are working with JDBC and File so you will be in need of it.
IR:
DT: 2
JDBC_Sender_DT
File_Output_DT(Optional)
You can use the JDBC sender data type structure for File output also.
MT as per your DT
MI:2
Outbound MI: JDBC structure
Inbound MI : File structure
MM: 1
IM: 1
ID as similar to other scenarios.All 1 objects for RD,ID,Sender Agreement and Receiver Agreement.
Sender JDBC channel:
Query: Select * from table where date
But I have a query how are you providing date in input paramerter.It will be dynamically entered into the query right.
You can mention the Avalibility planning for your interface to work in RWB.
Go to RWB>Component Monitoring>Adapter Engine->Communication Channel Monitoring>Avaliablity Planning
Please explain.
Regards,
Nutan

Stored Procedure in sender JDBC

Hey all,
I am trying to call a stored procudure in my sender JDBC adapter to send to an Idoc adapter. In the query statement, do I need to give just EXECUTE <stored proc name> or do I need to set up any special setting in the sender adapter?
-Teresa

Teresa,
Which DB are you trying to access?
If it is an oracle DB, then unfortunately, Sender JDBC adapter does not support stored procedures for an Oracle DB.
Reason is that JDBC adapter expects a RESULTSET while Oracle Stored Procedure returns a Cursor.
For any other DB, EXECUTE <STOREDPROCNAME> will suffice.
Regards,
Bhavesh

Calling Stored Procedure from Oracle DataBase using Sender JDBC (JDBC-JMS)

Hi All,
We have requirement to move the data from Database to Queue (Interface Flow: JDBC -> JMS).
Database is Oracle.
*Based on Event, data will be triggered into two tables: XX & YY. This event occurs twice daily.
Take one field: 'aa' in XX and compare it with the field: 'pp' in YY.
If both are equal, then
if the field: 'qq' in YY table equals to "Add" then take the data from the view table: 'Add_View'.
else if the field: 'qq' in YY table equals to "Modify" then take the data from the view table: 'Modify_View'.
Finally, We need to archive the selected data from the respective view table.*
From each table, data will come differently, means with different field names.
I thought of call Stored Procedure from Sender JDBC Adapter for the above requirement.
But I heard that, we cannot call stored procedure in Oracle through Sender JDBC as it returns Cursor instead of ResultSet.
Is there any way other than Stored Procedure?
How to handle Data Types as data is coming from two different tables?
Can we create one data type for two tables?
Is BPM required for this to collect data from two different tables?
Can somebody guide me on how to handle this?
Waiting eagerly for help which will be rewarded.
Thanks and Regards,
Jyothirmayi.

Hi Gopal,
Thank you for your reply.
>Is there any way other than Stored Procedure?
Can you try configuring sender adapter to poll the data in intervals. You can configure Automatic TIme planning (ATP) in the sender jdbc channel.
I need to select the data from different tables based on some conditions. Let me simplify that.
Suppose Table1 contains 'n' no of rows. For each row, I need to test two conditions where only one condition will be satisfied. If 1st condition is satisfied, then data needs to be taken from Table2 else data needs to be taken from Table3.
How can we meet this by configuring sender adapter with ATP?
================================================================================================
>How to handle Data Types as data is coming from two different tables?
If you use join query in the select statement field of the channel then whatever you need select fields will be returned. This might be fields of two tables. your datatype fields are combination of two diff table.
we need to take data only from one table at a time. It is not join of two tables.
================================================================================================
Thanks,
Jyothirmayi.

Using Stored procedure in sender or receiver jdbc adapter

Hi All,
Please let me know simple blogs for Stored procedure used in sender or receiver jdbc adapter to get data from 2-3 tables
Thanks

Hi
To work with Store proceudres (SP) you have to create the SP's in database like Oracle, Mssql or Msaccess.
Ususally the SP creations are done by database experts. For more info about "SP" try Googling!
The below blog is about SP but not the one you expect!
/people/itisha.alok/blog/2009/03/23/jdbc-stored-procedure-returning-multiple-resultsets
Executing an Oracle Stored Procedure from Sender JDBC adapter
Sender Adapter - -
SP will contain the select Query alone or with it will contain insert, delete statement too.
Receiver:
SP will have insert or delete satement.
Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
The below details are required to configure the adapters
Driver details
database name
Procedure name
user name
password,
Regards
Ramg

Invoking Oracle stored procedures from within a JDBC channel for PI 7.1

Hi ,
Can anybody tell me that is it possible to invoke Oracle stored Procedure from within a JDBC sender channel for PI 7.1.
Its working in XI3.0 and XI 7.0 for Oracle DBMS versions >= 10.2.x. But I am not sure,whether it will work for PI 7.1 also.
Thanks & Regards,
Saru

HI,
refer below link,there is no much difference in PI7.1 ,executing stored procedure is same .
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/7b72b2fde93673e10000000a114a6b/content.htm
Regards,
Raj

Running a SQL Stored Procedure from Power Query with Dynamic Parameters

Hi,
I want to execute a stored procedure from Power Query with dynamic parameters.
In normal process, query will look like below in Power Query. Here the value 'Dileep' is passed as a parameter value to SP.
    Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData 'Dileep'"]
Now I want to pass the value dynamically taking from excel sheet. I can get the required excel cell value in a variable but unable to pass it to query.
    Name_Parameter = Excel.CurrentWorkbook(){[Name="Table3"]}[Content],
    Name_Value = Name_Parameter{0}[Value],
I have tried like below but it is not working.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData Name_Value"]
Can anyone please help me with this issue.
Thanks
Dileep

Hi,
I got it. Below is the correct syntax.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData '" & Name_Value & "'"]
Thanks
Dileep

How to send a Varying Array param to a PL/SQL Stored Procedure from Java

* I am VERY new to jdbc, and even somewhat new to Java
* I'm using Java 1.5, Oracle 10g.
* I need to call the following PL/SQL Stored Procedure from Java:
procedure setEventStatus
i_deQueueStatus in deQueueStatus_type
*deQueueStatus_type is the following (an array of deQueueStatus_OBJ):
CREATE OR REPLACE TYPE deQueueStatus_OBJ as object
eventID number (20),
dequeuestatus varchar2(20)
CREATE OR REPLACE TYPE deQueueStatus_TYPE IS VARYING ARRAY(500) of deQueueStatus_obj
*I have created a Java object as follows:
public class EventQueueDeQueueStatus
     long      eventID;
     String      dequeueStatus;
     EventQueueDeQueueStatus(long eventID, String dequeueStatus)
          this.eventID = eventID;
          this.dequeueStatus = dequeueStatus;
I have an ArrayList of these.
I need to pass this list to the Stored Procedure. How do I create a java.sql.Array so I can call CallableStatement.setArray to set the parameter? Or do I use something else? I have tried setObject with both the ArrayList and also with a primitive array, but got "Invalid Column Type" both times.
Any help would be greatly appreciated. I just got this task today, and I have to make it work by Tuesday :-( !
Thanks,
Kathy

Kathy,
Search the archives of this forum and the JDBC forum for the terms STRUCT and ARRAY and you can find some sample code on the JDBC How-To Documents page and the JDBC Samples which can both be accessed from this page:
http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Good Luck,
Avi.

Stored procedure by using jdbc sender adapter.

Hi All
I need to call the stored procedure and make it as sender how do design data type to make stored procedure as sender
Thanks
Jeongbok.

Hi Jeong;
The Data type structure will be like
row
field1
field2
field3
the name of the fields will be same as defined in your stored procedure
Mudit

Error while invoking stored procedure from BPEL process

Hi Folks,
I am facing the below mentioned issue while invoking a stored procedure in BPEL process :
I am trying to invoke a stored procedure from a BPEL process. The process runs fine for the first/second time, but gives the below error after that whenever i try to run the process :
file:/oracle/orasoa/bpel/domains/default/tmp/.bpel_ProvisionOrderASAPReqABCSImpl_1.0_50dd1595129e9bbb00560e31e7c18cef.tmp/DB_CALL_GetPendingSubscriptionProc.wsdl [ DB_CALL_GetPendingSubscriptionProc_ptt::DB_CALL_GetPendingSubscriptionProc(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'DB_CALL_GetPendingSubscriptionProc' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the PROC_GET_PENDING_SUBSCR API. Cause: java.sql.SQLException: Io exception: Connection reset [Caused by: Io exception: Connection reset]
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the PROC_GET_PENDING_SUBSCR API. Cause: java.sql.SQLException: Io exception: Connection reset [Caused by: Io exception: Connection reset]
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
I am not getting how the BPEL is referring to the DB wsdl from the tmp folder. To resolve this issue, we have to stop the SOA server, delete the tmp files, and restart the server.
Any pointers in this regard will be really helpful.

First of all does this scenario occur again.
"Works first/second time. Later gives this error."
After you restart the SOA server are you able to reproduce this scenario?
As already pointed out and from the error message, database connection is reset.
If you find this error again, try this out.
em -> home / oc4j_soa -> Administration -> JDBC Resources
Use the "Test Connection" option for the Connection Pool that you are using for your database JNDI.
It comes back and say "Connection to "XYZCP" established successfully." it is good to use.
Run the BPEL process again and once you find the error, come back and test the connection.
If it comes back with Error, diagnose based on the error message received.
Cheers
Kalidass Mookkaiah
http://oraclebpelindepth.blogspot.com/

Parameters to stored procedure from sender JDBC

Similar Messages

Maybe you are looking for