Parameters with no display

Hi,
I have designed a report  for all contracts..
Now the client wants to schedule this report.
When we schedule this report it should send mail to the person who created the contract when its going to expire.
So i want a field in the screen which should not be displayed on screen but i can pass value to the variant when i create it.
So  can i have a parameter field with no display and in the variant pass a value to this paramater.
And will schedule this report with this variant.

hi swathi,
try this code for selection screen designing and in event at selection-screen output pass the value of user name to which you want to display those parameter and for other user these field will not display......
tables : mara,aufm,somlreci1.      
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_bukrs LIKE aufk-bukrs  OBLIGATORY.
SELECT-OPTIONS: s_matkl FOR mara-matkl.   "Mat Group
SELECT-OPTIONS : s_werks FOR aufm-werks OBLIGATORY NO INTERVALS.    
PARAMETERS: p_werks LIKE aufm-werks MODIF ID ab, 
            p_budat LIKE aufm-budat.
SELECTION-SCREEN: END   OF BLOCK b1.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS : s_email FOR somlreci1-receiver MODIF ID ee.
SELECTION-SCREEN: END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
  IF sy-uname NE '<username>'.
    LOOP AT SCREEN.
      IF screen-group1 = 'EE' OR screen-group1 = 'AB'.          
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
  ENDIF.
Regards
Gagan

Similar Messages

  • Exits with parameters are not displaying in CO Substitution

    Hi there...
    I am having this problem...I´ve created a CO substitution following all the steps involved, works fine when I define the parameter:
      exits-param = c_exit_param_none in form GET_EXIT_TITLES
    The transaction code OKC9 displays the exit with the field:
    parameters = "No change"
    but when I changed the parameters in my exit for use parameters:
    exits-param = c_exit_param_field
    After the activating and generating with RGUGBR00, the exit doesn´t display in exits availables in OKC9 in fact all the exits with using parameters are not displaying in OKC9.
    What am I doing wrong here?
    Thanks in advance!!!
    Alfredo
    Amber

    Calibrate your monitor.

  • Displaying 2 parameters with descriptions in same line of Selection-Screen

    Hi All,
    I want to know how can we display 2 parameters with descriptions in same line of Selection-Screen.
    Means in selection screen first we will give comment as
    <b>Material no</b> then <b>parameter box as MARA-MATNR</b>, In the same line description as <b>Plant</b> then <b>parameter box as T001W-WERKS</b>.
    Material No - BOX - Plant - BOX.
    Can any body tell me how can we do it.
    Thanks in advance.
    Thanks & Regards,
    Rayeez.

    Hi shaik,
    1. define two TEXT-SYMBOLS :
    001     Material
    002     Plant
    and Activate
    2. use this code (just copy paste)
    REPORT abc LINE-SIZE 80.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(10) text-001 FOR FIELD p_matnr.
    PARAMETERS : p_matnr TYPE mara-matnr.
    SELECTION-SCREEN COMMENT 35(10)  text-002 FOR FIELD p_werks.
    PARAMETERS: p_werks TYPE t001w-werks.
    SELECTION-SCREEN END OF LINE.
    regards,
    amit m.

  • How do you have more than one parameterized Query to display "All"?

    hi,
    I am using:
    Jdeveloper 9.0.5.2
    Oracle Database 9.2.0.1
    Toplink
    Struts
    I have been able to create a parameterized query to display an html read only table.
    I populated a dropdown list with values from the database
    and the values I select will be the parameters to my read only table.
    The drop down list is on the same page as the read only table.
    I have all this working but I also need to hard code an option in the Drop down to "All"
    to represent all values of this parameter.
    I was able to trick the jsp page using two read only tables
    and displaying the one with the parameterized query when a parameter other than "All" was chosen
    and then display the other only when "All" was chosen.
    This does not seem the best way to do it.
    What if I had more than one parameter and I wanted to show "All"
    the values of one and a certain values for another.
    I would then need at least 4 read only tables.
    How do I accomplish this in an easier way?
    Thanks in advance.

    I am not exactly sure what you are asking... Are you having trouble with TopLink, or another part of your application?
    Peter Krogh

  • I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?

    I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?

    If your budget is unlimited, look at both the retina and non-retina and make a decision based on your preferences.  If funds are tight, explore the options in the refurbished section.  Unless you are dealing with courses that demand specific performance parameters, any one of these options will suffice.
    Ciao.

  • How to define  parameters with radio button

    HI
      How to define  parameters with radio button, but that radio button should display in front of the variable name not after variable name. and under that radio button variable I hve to define parameters, select-options and some other radiobutton varibles.
            I don't know how to paste figures here, otherwise i will provied u the figure for more details.
    Regards.

    PARAMETERS : r1 RADIOBUTTON GROUP radi.
    Go to --> text elements --> selection text
    R1    <your text>
    You can change the program selection screen lay out in screen painter (se51) .
    screen number for your selection screen is 1000.
    Regards,
    Santosh reddy
    Edited by: Santosh Reddy on Dec 9, 2008 11:21 AM

  • Regarding Parameter with NO-DISPLAY option

    Hi,
    I want to create a check box with NO-DISPLAY option how can i declare it.
    Means i need to create a check box with default value 'X' and it should not be displayed in selection screen.
    How can i do it!
    Thanks in advance.
    Thanks,
    Deep.

    SORRY ,i forgot to see the check box..
    please write following code it wil work - 
    parameters: p_cbox as checkbox MODIF ID ABC USER-COMMAND CH DEFAULT 'X'.
    Check sy-ucomm = 'CH'.
    AT SELECTION-SCREEN OUTPUT.
    loop at screen.
    if p_CBOX = 'X'.
       if screen-group1 = 'ABC'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
       ENDIF.
    ENDIF.
    endloop.
    **award points****
    amit

  • MBP Retina low performance with external displays

    Hi everyone!
    I have a very bad performance with my MBP 15´´ retina display when it comes to ad an external display. I have a FUL HD LG monitor that looks very bad when i connect the HDMI or the thunderbot port with the proper adapter (as bad as you can´t even read). I want to know if this may ba a hardware problem just with my computer or if it is a software problem, any ideas? does anyone have the same issue?
    How can i update my NVIDIA card???
    Thanks a lot!

    Topic seems to come up here often. Apple has a tendency to dismiss the issue.
    Its a pretty well known problem that Mac font smoothing doesn't seem to work well on high resolution third party external displays, making text hard to read. In addition, I think the Mac HDMI resolution support is limited to 1080p, so you must use DP or DVI video interfaces to see full monitor resolution.
    The OS default is no font smoothing on external displays (except perhaps the apple display). There is a terminal command that will enable font smoothing for any external monitor, but it often doesn't work well enough. I found that using the OS zoom feature magnifies text to the point to be easily readable. You can set zoom parameters in the accessibility systems preference panel.
    For some reason, sometimes the Mac OS thinks some monitors are TVs and use YCbCr instead of RGB. You can open the color sync utility and brouse the settings to see what is being used. There are scripts available that can fix that but are more complicated to install than an app.
    It seems that PCs are way ahead of Macs with external display implementation. Most folks having monitor problems with a Mac do not see the same issue with PCs or Unix/Linux OSs.
    Oh as far as updating the video card, can't. The monitor  "drivers" are built into the OS. When a new display is connected, the OS finds the profile for it.

  • NVIDIA OpenGL driver lost connection with the display driver

    Alienware M14x Laptop
    Windows 7-pre 64-bit
    8gb ram
    3gb Video: NVIDIA GeForce GT 555M
    Intel i7 2760QM
    AE CS4
    AE keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or changing opacity of a layer. in 1080p, I have a picture layer, a solid, some color corrections, and that's it. i just got this new computer and i have never had this problem on my old computer.
    this message appears after AE crashes."The NVIDIA OpenGL driver lost connection with the display driver and is unable to continue. The application must close."
    this message appears in the taskbar: "Display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"
    any ideas on how to stop AE from causing my display driver to stop working?
    Thanks, Ramzi Rebeiz

    For anyone picking up this thread (it's probably too late for rrebeiz40 by now!) I have come across a simple but apparently very effective tip that has solved the 'OpenGL driver lost connection' issue for many people using various NVIDIA with various Adobe progs (incidentally a lot of these seem to crop up on Dell machines, especially Notebooks).
    (It fixed my issue with Premiere Pro CS4 - GeForce GT 555M on Win 7 Ultimate 64-bit, Dell XPSL702X).
    It's posted on http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40 (look for the last post, No 50) as follows:
    THIS FIX APPEARS TO WORK...found on an Adobe forum
    "This issue led me to this fix: go to NVIDIA Control Panel --> Manage 3D Settings --> Global Settings, and switch "Power Management Mode" to "Prefer Maximum Performance" (the default "Adaptive" setting seemed to be the culprit). And that's it! The key here is changing the "Global" setting, as my individual programs were already set to "Prefer Maximum Performance." I can cause the error to reoccur by changing back to "Adaptive."
    Otherwise lots more ideas on this site: http://www.instructables.com/id/How-to-Fix...Nvlddmkm-Error/
    My PC has been running for 2 days now. I only put the top fix in for now. Feel happier I have more options if need be though.
    Inserted from <http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40>
    It worked for me

  • Analysis Authorization based on Hier node with multiple display hierarchies

    Hi guys - I've got a problem where s.o. might have an idea of how to switch on the light at the end of the tunnel, I am currently standing in:
    Requirement:
    Cost Center Authorization should be given through RSECADMIN, reporting should be possible for any hierarchy that exists for the authorization relevant info object.
    Preferred solution:
    The Cost Center Analysis Authorization should be given through RSECADMIN - Hierarchy node assignment.
    u2022     A dedicated Authorization Cost Center Hierarchy will be maintained in ECC6 as an alternative cost center hierarchy and extracted into BW.
    u2022     The RSECADMIN Hierarchy node assignment should be based on a particular node (Type 2).
    u2022     The display level will be specified as required (here: Level 7)
    u2022     The Authorization granted should be independent of hierarchy name and version (validity 3).
    Reporting Scenario and technical impact:
    As mentioned above, when designing and running a query the user should be able to freely select other (i.e. than the authorization) display hierarchies for the authorization relevant reporting object 'Cost Center' as well. The technical names of the semantically relevant hierarchy nodes could therefore vary. E.g. cost centers 1, 2 and 3, being assigned under hierarchy node u2018Au2019 of the RSECADMIN relevant authorization hierarchy, could be subsumed by hierarchy node u2018Bu2019 in another display hierarchy, which the user may want to display in accordance to his reporting needs. Ideally, the alternative display hierarchy should therefore display node u2018Bu2019.
    My findings so far (based on prototyping) turn out that this is not possible as long u2018Bu2019 (and its hierarchy) is not authorized in RSECADMIN. Can these findings be confirmed? And if not, would anyone have an idea of how to facilitate the reporting scenario?
    Would there be any other way to grant access, possibly based on RSECADMIN single values, and also enable the user to flexibly display hierarchies with only those hierarchy nodes whose single cost center values the user has been given access to?
    Thanks everyone for your input...
    Claus
    Edited by: Claus64 on Jul 13, 2009 4:10 AM

    HI CLause,
    On Jul 14 2009, you wrote in SDN and said:
    FYI: Found a solution...
    The hierarchy analysis authorization will be based on a navigational attribute of cost center.
    With analysis authorizations it is possible to declare the Auth object (e.g. 0COSTCENTER__RACCAUT0) as authorization relevant and leave the superior object 0COSTCENTER auth irrelevant.
    The auth will be given for 0COSTCENTER__RACCAUT0. This object will be placed as a filter of the query, being restricted by an Authorization variable for hierarchy nodes.
    Due to the concept of Analysis Authorizations, this variable will automatically pick up the nodes granted as part of RSECADMIN Hierarchy based Authorization.
    As mentioned above, 0COSTCENTER as the regular reporting characteristic remains auth irrelevant and can therefore take any hierarchy thatu2019s available. Reporting on single values will be possible, too. Only those nodes show up that hold the authorized cost centers in accordance to the authorization.
    If the auth relevant 0COSTCENTER__RACCAUT0 is not used in the query definition by either not taking it in as a filter or skipping the Auth variable, the query will launch the message that the authorization is missing. No data show up at all.
    Claus
    See this thread:
    Analysis Authorization based on Hier node with multiple display hierarchies
    I am also in the same situation as you and need to understadn your solution. I understand that you created a Nav Attr on 0COSTCENTER and made this auth relevant whilst ensuring that 0COSTCENTER is NOT auth relevant. This is all fine. The issue was you have multiple hierachies for 0COSTCENTER, how did the new Nav Attr help you solve your issue. When loading 0COSTCENTER what values did you load ino the new Nav Attribute and how did that link to the hierachies? Also, in RSECADMIN you created hiearchy nodes based on the Nav Attribute but I am confused as to what values you have in the Nav Attr.
    I appreciate if you can share your solution from the past in more details.
    many thanks

  • User command is not getting triggered in interactive ALV with LIST display

    Hi experts,
    I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
    It gives the following information instead.
    "Choose a valid function".
    (My user command name and its respective form name are same.)
    Here is my code..
    START-OF-SELECTION.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          i_callback_program       = sy-repid
          i_structure_name         = p_table
          i_callback_user_command  = 'TST1'
          i_callback_pf_status_set = 'SET_PF_STATUS'
        TABLES
          t_outtab                 = <dyn_table>
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
      ENDIF.
    FORM tst1 USING r_ucomm LIKE sy-ucomm
                    rs_selfield TYPE slis_selfield.
    * Local data declaration
      DATA: li_tab TYPE REF TO data,
            l_line TYPE REF TO data.
    * Local field-symbols
      FIELD-SYMBOLS:<l_tab> TYPE table,
                    <l_wa>  TYPE ANY.
    * Create table
      CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
      ASSIGN li_tab->* TO <l_tab>.
    * Create workarea
      CREATE DATA l_line LIKE LINE OF <l_tab>.
      ASSIGN l_line->* TO <l_wa>.  CASE r_ucomm.
    *   When a record is selected
        WHEN '&IC1'.
    *     Read the selected record
          READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
          rs_selfield-tabindex.      IF sy-subrc = 0.
    *       Store the record in an internal table
            APPEND <dyn_wa> TO <l_tab>.
    *       Fetch the field catalog info
            CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
              EXPORTING
                i_program_name         = 'Z_DEMO_PDF_JG'
                i_structure_name       = p_table
              CHANGING
                ct_fieldcat            = i_fieldcat
              EXCEPTIONS
                inconsistent_interface = 1
                program_error          = 2
                OTHERS                 = 3.
    Please advice what is the msitake i have done here..

    Read the following code:
    pass the  i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm    LIKE sy-ucomm
                            selfield TYPE slis_selfield.
    as shown below.
    thanx
    Data for ALV display
    DATA  : gt_fieldcat TYPE slis_t_fieldcat_alv,
            gt_events           TYPE slis_t_event,
            g_variant LIKE disvariant,
            g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
            g_status            TYPE slis_formname VALUE 'SET_PF_STATUS',
            gt_list_top_of_page TYPE slis_t_listheader,
            g_repid LIKE sy-repid,
            gf_pos TYPE i
    Data for ALV display
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
               EXPORTING
              i_callback_program      = g_repid
                 i_callback_program      = sy-repid
                 it_fieldcat             = gt_fieldcat[]
           it_events               = gt_events[]
              i_callback_user_command = g_user_command
                 i_save                  = 'A'
                 is_variant              = g_variant
               TABLES
                 t_outtab                = it_print.
    FORM user_command USING ucomm    LIKE sy-ucomm
                            selfield TYPE slis_selfield.
      CASE ucomm.
        WHEN '&IC1'.
          CASE selfield-sel_tab_field.
            WHEN '1-KUNNR'.
              READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
              IF sy-subrc = 0.
                SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
                CALL TRANSACTION 'BP'.
              ENDIF.
            WHEN '1-MATNR'.
              READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
              IF sy-subrc = 0.
                SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
                CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
               GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
               SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
               SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
               CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
              ENDIF.
    Endcase.
    Endform.

  • How do I get the most out of my Macbook pro with retina display?

    Hi,
    I am new to apple had an Iphone and loved it and was drawn in by the advertisment for the new macbook pro with retina display and decided to get myself one. I have pretty much taught myself everything so far and I think I have a basic enough knowledge now of working my way round my mac and was wondering if anyone has any suggestions on how I can look to develop as I feel I have got all the gear but no idea!\
    Any suggestions are greatly appreciated,
    Cheers

    http://www.apple.com/support/mac101/

  • How do I connect an external microphone to a Macbook Pro with Retina display ?

    How do I connect an external microphone to a Macbook Pro with Retina display ?
    Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?

    Plug it into the linein/headphone jack if there's just one.  It'll switch between the two modes automatically depending on what you plug into it.

  • I have Problem with my new macbook with Retina display

    my new macbook with Retina display i have Problems
    (Suddenly Stuck) stop working don't thing move even mouse even caps lock light in keyboard it not work it is totally Stuck till shutdown it from keyboard and restart

    Hmm sounds like a saved application state issue and memory related.. I hate to ask are these graphic intensive apps. ?? games ??
    Try these two things and restart if it still occurs then i recommend contacting AppleCare
    disable the Resume and App Restore feature completely in Mac OS X 10.7.
    Launch System Preferences and click on the “General” icon
    At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps”
    - Click on the Apple on the top left. Choose shutdown "Uncheck" Reopen windows when logging back in
    **use your mac normally just like you were if the issue reoccurs then contact AppleCare..  Enjoy..

  • TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

    Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

    Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

Maybe you are looking for

  • Error installing boot camp on MBA

    I can create the partition fine, but when I click on the button to restart the Mac and get the install of XP started, the installation program will start its "Inspecting computer configuration" step (this is before any kind of installation program lo

  • Does report2.5 works with srw.run_report and Oracle Apps11.0.3

    Hi, I have reports2.5 and using srw,run_report I want to call another report. NOw I have registered this in oracle apps 11.0.3 . Now through oracle apps if I run the main report it has to call the child report (calling via srw.run_report) and the out

  • Have changed Apple-id. System wants some kind of confirmation concerning credit card. Doesn't accept card number etc. What to do?

    Have changed Apple-id. System asks for some kind of confirmation concerning credit card. Doesn't accept actual card data. What to do?

  • Flexible code

    I made a text item and made pl/sql for the text item as; :status_control_block.current_block := :SYSTEM.CURRENT_BLOCK; got the following error message; error 49 at line 1 bad bind variable 'status_control_block.current_block' and I got it from a book

  • Spotlight won't find files in user folder

    i have spoken to apple tech support on this and they continue to try to find a solution but..... i have files that spotlight doesn't find. they are in my user folder. in fact, it won't find the folder (s) one is on my desktop, one in documents. (thes