Paravirtualized Driver problem with Windows XP SP3

Hi,
While trying to install Oracle PV block dirvers to a fresh Windows XP SP3 system in Oracle VM 2.1.5 I get a blue screen of death. Any advice on how to overcome the problem would be greatly appreciated.
Best regards,
V.B.

Hi, rlomba
Thank you for your reply.
Of course I know about .Net and netfront. Moreover, I have successfully installed Win Server 2k3 as PV.
I think the problem is a bit deaper. When I skip block device I can proceed with installation, however on reboot Oracle PCI (SCSI-?), and network drivers fail to start.
A more generic question: did anybody succeed with installing Oracle PV drivers to XP? What SP was it?
Thanks in advance

Similar Messages

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

MOVED: Driver problems with Windows Professional XP 64bit Edition

This topic has been moved to Operating Systems.
Driver problems with Windows Professional XP 64bit Edition

Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

Scanner driver Problem with - Windows 8.1 and HP AIO L7680

Hi folk,
i have a problem with my HP AIO L7680.
I have made an upgrade to Windows 8.1 x64
I install the actual driver version 14.8.0.
The printer runs but the scanner makes trouble.
When i will start a scan process i will get an error message and the scan process will be canceled.
I will get this error message with photoshop, HP Solution Center and any other scanner software.
The HP Print and Scan Doctor says i should contact the support.
Here i am any idea?
By the way i disabled my Antivirus Software during the installation.
Thanks a lot.
greetings
Markus
This question was solved.
View Solution.

Hi Markus,
I understand that you are having an issue with scanning after upgrading to Windows 8.1. I will try my best to help you resolve this issue. I just need a little more information. What operating system are you running on your computer? Are you connecting wireless or with a USB cable? What is the error message that you are getting?
I am including this document for A 'No Scan Options' or 'Scan settings are not set' Message Displays on the All-in-One there are trouble shooting steps for Windows 8 that will work for Windows 8.1.
I hope this helps, let me know.
Thank you,
I worked on behalf of HP.

HP Pavilion dv7-1250en Audio Driver problem for Windows XP SP3 x86

Hi. I have installed Windows XP SP3 in HP Pavilion dv7-1250en and has found all drivers except Audio Driver for Windows XP SP3 32-bit.
Everest found 2 Audio device
1) IDT 92HD71B7 @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
2) nVIDIA HDMI @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
Please help.
Thanks in advance.

Try sp41693
IDT High-Definition Audio CODEC Driver,
sp41693, vista driver, reported work in XP here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Satellite 2770 - Display driver problems with Windows 2000

Hello,
I've a Toshiba Satellite 2770 and installed Windows 2000 on it. If I'm not wrong the S2770 does have a S3 Savage IX/MV graphic card and I downloaded the Windows 2000 driver from the S3 website but it wont be recognized by the hardware detection.
Then I tried the Windows 95SE driver from the Toshiba website, but Windows 2000 wont acept it due it's not suitable for Windows 2000 as it seems.
What to do? Isnt there a Windows 2000 driver out there which works? I dont want to work in 640x480 and 16 colors forever!

Hello
You are absolutely right. Your unit has S3 Savage IX8 graphic card but problem is that your unit is delivered with WinME operating system. That means that there is no support for other operating systems. All drivers are designed for each notebook model and OS separately. The only way to solve this problem is to install the driver given by graphic card producer. If this not works you have a big problem.
Sorry but I really dont know what you can do. Maybe you can try to install the driver designed for Sat 2750. There is the same graphic card but driver is designed for Win98SE.

G510 Dolby Digital Plus Advanced Audio doesnt work driver problem with Windows 8.1

Hi,
my Lenovo G510 has Windows 8.1 64-bit.
In the system menue of Hardware and Sound I can see two entries:
1) Dolby Digital Plus Advanced Audio
2) Dolby Digital Plus Advanced Audio (32-bit)
Clicking on the first entry a control panel appears. Does this mean that Dolby Digital Plus Advanced Audio is always running in the backround? There is no entry in the systray.
Clicking on the second entry this error message appears:
Your current installed version is 7.3.2.2 of the Dolby Digital Plus audio driver. The software needs the driver version 7.5.1.1. Installe a correct combination of driver and software.
What to do with this? I searched for a solution and drivers but couldn´t find anything.
Thanks for your help.
Solved!
Go to Solution.

Hi Zoori,
Welcome to Lenovo Community Forums!
I’m sorry to hear that “Dolby Digital plus Advanced Audio” is not working as expected in your G510 Laptop and displaying an error message to install the upgraded version of the Dolby driver in the computer, below are the troubleshooting steps to check and resolve this issue.
Open Device Manager. (Right-click on the Start button and choose Device Manager).
Expand the Sound, Video and Games Controllers section.Right Click on the Conexant Smart Audio HD item and choose Uninstall.
Still in Device Manager, click on Action>Scan for new Hardware.
The Conexant Smart Audio item will re-appear.Right-Click on it and choose update driver.Navigate to d:\drivers\audio.When that's done, close Device Manager.Open File Manager and navigate to D:\drivers\Audio\DolbyGUI and install Dolby Digital plus Advanced Audio.
That should get rid of the error message and this version of Dolby Digital plus Advanced Audio should be working as expected.
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satego P100-10U - Driver Problems with Windows 7

Hi!
As also recommended by Toshiba I installed Windows 7 64 bit on my Satego P100 10u Laptop. However after doing so I face the following issues:
- there is no sound although the audio device (Conexant High Definition Smart Audio HD2) driver seems to be installed.
- the sd card slot is not recognized
Unfortunatelly I did not find any Windows 7 drivers in the toshiba driver download area for these devices.
Can anybody please help me?
Thanks a lot and kind regards
Gunnar

>The audio device is listed as "Conexant High Definition SmartAudio HD2" but with a yellow exclamation mark, as it does not work properly
Delete this device from the device manager list and reboot the unit.
Usually the OS should automatically delete the new device and should search for drivers.
Fact is that if this device is recognized as Conexant High Definition SmartAudio then the driver is already installed and there could be other issue.
>Any other idea how to get the original driver or another one without re-installing the complete system (please not - would take so much time as everything else is configured now) with a little chance of success?
Well, if the tip mentioned above will not help, then a new installation might be a good idea even if this would take some time

Driver problems with Windows Vista 64

Hello, I recently upgraded to Vista 64bit. I have a Creative Sound Blaster Audigy model# SB0090.
Whenever I try and install the drivers, it says:
"Set is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup. Setup will exit."
I've been reading through the forums, and haven't seen anything useful. I tried downloading the 3rd party software by kX that I saw someone recommend, but it didn't work either. It said it installed the drivers, but that there was a conflict. Still says "No Audio Output Device is installed" in the bottom tray.
Someone help me, I want to have sound on my PC with vista

Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

HP LaserJet 1022 driver problem with Windows 7

I can not load the drivers for LaserJet 1022 on my new acer windows 7 lap top. I got a windows 7 machine a couple years ago and Had no problem loading drivers. Any one have any suggestions.?

Hello Abzozo1. I understand you're getting the "webcam not detected" error.
What is the exact product number of the notebook? This document can show you where it is located.
Has the webcam ever worked since you upgraded the operating system?
To ensure that you have all of the software installed properly I suggest installing the HP Software Framework and HP Support Assistant. You can then run HP Support Assistant and it will automatically install any missing software. If that doesn't resolve the issue I suggest you take a look at my thread located here. This thread covers the common solutions to this error.
Take a look at that thread and let me know if any of the steps help.
Have a great day! I'll keep an eye out for your next reply.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

External hard disk drive problem with windows laptops?

my other hard disk drive cannot be read or write on windows and on my macbook pro 13.

If the HDD cannot be read on either machine, it may have failed. Connect it to your MBP and open Disk Utility. Is it recognized there?
Ciao.

AutoInstall problems in Windows XP SP3 + IE8

I'm trying to autoinstall the JVM from a cab file using an OBJECT tag, but I have problems when I try in Windows XP SP3 + IE8.
My code is the following:
<OBJECT id="appletComprobarSoftware"
     classid="clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA"
     codebase="http://java.sun.com/update/1.6.0/jinstall-6u15-windows-i586.cab">
</OBJECT>
If Java is already installed in the machine, the JVM installs correctly in the browser but, if it is not installed and it is downloaded, when the installation finishes, the browser turns into "no response" state and I must close it.
So if I try to execute an applet, using the code below, and java is downloaded because it is not installed in the machine, the applet will never execute since after java installation the browser must be closed.
<OBJECT id="appletComprobarSoftware"
          classid="clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA"
          codebase="https://java.sun.com/update/1.6.0/jinstall-6u13-windows-i586.cab">
          <PARAM name="code" value="es.spee.arq.pub.firmadigital.DummyApplet.class">
          <PARAM name="archive" value="DummyApplet.jar">
</OBJECT>
I have tried with several java versions and the results are always the same, but the same code in Windows Vista or Windows 7 + IE8 works perfectly.
Do you know what is the problem and how to solve it??
Thank you very much.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

Problem with Windows 8.1 and Corseca Byte BT headset

I recently bought a Corseca Byte bluetooth headset.
The headset works fine with phones.
Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
and restart it works fine unless it lays unused for some time.
Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
How to solve the issue?

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Hard drive problem with HP Pavillion dv7-4180us

Hard drive problem with my HP Pavillion dv7-4180us. Using Windows 7.
Boots up sometimes and very slow.
Appreciate any help.

Have you booted into the BIOS or Diagnostics Tool to run the Hard Drive Test?

Pc with windows xl/sp3 can't connect / acquire ip address from airport extreme; meanwhile, my macbook in connecting fine. We have a wpa2 personal password

My husband's Dell with Windows xl (sp3) can't get an ip address from our new airport extreme. Nor can my daughter's Windows 7 computer. There are no firewalls in place. Both computers worked with my old Airport, though it was sssslllllllowwww. My Macbook works fine and is super fast compared to the old airport. We are using a wpa2 personal password.
Anyone out there have a cure for this problem so we can hook up those sad pcs?
Thanks a lot.
Elizabeth

First, make sure that the new Airport is configured exactly the same as the old one. Hopefully you saved the configuration settings in a file and can look at them to be sure.
If the Windows PC's can't connect with the same password, it's possible that the PC's were using an older wifi protocol like 802.11a or b. The new Airport is backwards compatible but has to be setup that way check to see what versions of 802.11a the windows computers support and make sure that the wireless mode of the airport is setup to accomodate them.
Can the PC's get an IP address if they are connected to the AirPort using an ethernet cable? If they can, that would help naorrow things down to a wireless issue and not some other configuration problem.

Paravirtualized Driver problem with Windows XP SP3

Similar Messages

Maybe you are looking for