Parent segment occurrence in IDOCs

Hello,
I would like to know the significance of the Maximum occurrence of a parent segment of an IDOC.
Eg: E1MARAM segment of MATMAS05.
In this case it is given as 9999.
Can one MATMAS05 IDOC have two E1MARAM segments?
Thanks.

Hi,
Its possible to send multiple materials at the same time.
Thats why its mentioned as 9999.
Regards,
sasi

Similar Messages

Add segments to an idoc already in the database?

Hi All,
I have a requirement to add segments to idocs that are already in the database. I had hoped to use Function Group EDI1 to do so, but the FM EDI_SEGMENTS_ADD_BLOCK only works for creating idocs from scratch. There is a FM EDI_CHANGE_DATA_SEGMENTS, but it appears to only allow changing segments that already exist, not adding new segments.
How would you handle this one? This is the first time I've been tasked with adding segments to an idoc OUTSIDE of a user exit during create, and I'm unsure how to proceed.
Thanks,
Bryan

If it is standard IDoc segment, i am sure you can use this FM
FU EDI_SEGMENTS_ADD_BLOCK
Short Text
EDI interface: Add block of data records
Each call of the function module 'EDI_SEGMENTS_ADD_BLOCK' inserts a block of data records into the IDoc. In each case the EDI interface records the current position in the IDoc and appends the block of records at the end.
The data records are transferred to the function module in an internal table. This table is NOT initialized in the function module, that is, the parent program must carry out an initialization (REFRESH) during a repeated call.
Application data is transferred to the data record. The data record consists of a general administration part and of the field 'SDATA', which contains the application data.
The administration part contains information that describes the data record in the context of the Intermediate Document (for example, the IDoc number).
The fields 'SEGNAM' and 'HLEVEL' must be filled by the parent program.
The fields 'SEGNUM' and 'PSGNUM' can be filled by the function module or can be transfered during the function module call. They are checked for consistency in this case.
With the help of an ABAP/4 Dictionary structure, the field 'SDATA' can be split up and interpreted. The documentation for these structures can be found using the program 'RSEIDOC1'.
The function module can only be called in 'CREATE' mode.
Parameters
IDENTIFIER
IDOC_CONTAINERS
Exceptions
IDENTIFIER_INVALID
IDOC_CONTAINERS_EMPTY
PARAMETER_ERROR
SEGMENT_NUMBER_NOT_SEQUENTIAL
Function Group
EDI1

What is max no, min no asked when attaching a segment with the idoc in we30

hi,
when creating a new idoc i am attaching a segment with the new idoc its asking for Maximum number, minimum number . what is this maximum and minimum number.

hi preetha,
Segm.type       Z1xxxxH
mandaotry segment Y
Minimum number 1
Maximum number 1
Parent segment
Hier.level      1
min and max are 1 for header denoted as XXXXH
this is one segment that is assigned to the idoc.
in defining idoc u need to assign the number of header and child segments..
a child segment will be like this
segment.type       ZXXXXD
minimum number 1
maximum number 6
parent segment ZxxxxH
hier.level      2
zxxxd is the child segment with 6 entry levels
this tells u the maximum number for the child level
means more than 6 are not to be see if u open the idoc in we19.
all in
this idoc has 1 parent segment (one entry)
              1 child segment (6 entries)
hope this helps
regards,
Vijay

Partner segment issue in IDOC IORDER01

Hi All,
We are using IDOC IORDER01 for sending Order and their detail to a system, for that we are using transaction IORD.
Structure of IDOC type is:
ZIORDER01   PM/SM Orders (Crt and Upd) Enhancement for OP2000
    E10RHDR      PM/SM order Header Segment
         Z10ORHDR         Outbound - PM/SM Orders (Create and Update) order hdr
                                   Enhanc
         E10RHDR_LTXT Header Long Text segment
         E10RADR           Order Address Segment
         E10RPMT           Order Permit Requirement segment
         E10RTOB           Technical Object Segment
         E10RPAR           Partner Segment
         E10ROPR           Order Operation Segment
         E1NTHDR           Notification Header Segment
Currently all the data passes through IDOC except E10RPAR (Partner segment) because SAP allows only partners of type SOLD-TO-PARTY etc to pass using this IDOC.
But, Client has requirement of passing all the partners of the Order to the system.
So we need to find out solution on how to pass all the partner data irrespective of partner type.
Any inputs on this would of great help.
Please let me know if any one worked on such a requirement.
Regards,
Lavanya.

Mohana
Are you sure about the segment name E1EDK01 ?? Becoz.. Only one Segment of type E1EDK01 is allowed in one IDOC...
See below for details:
Segm.type       E1EDK01
Minimum number 1
Maximum number 1
Parent segment
Hier.level      1
Thanks
Amol Lohade

Creating Parent Segment

Hi,
I need to send the Parent segment when child segment exists. How to achive
this.
My source is
SSG12
--SSG17
Here when SSG17 exists then I need to send SSG12 to idoc Segment
E1EDP10 (Target). In if condition I am getting the context problem, All SSG12
segment which were having SSG17 not passing.
regads,
Ansar.

HI,
See if you are using exists then it will give either true or false output. On the basis of true and false you will generate ur parent segment.
I think this should work for your case.
Thanks and Regards,
Chirag Gohil.

How to add a custom segment in standard IDoc?

Hi,
I want to add a custom segment in stanard IDoc type (eg. MATMAS). I don't want to go for extended idoc (copying stanard idoc into zidoc and adding custom segment).
Please tell me.

Hello
Transaction BD10 uses fm MASTERIDOC_CREATE_REQ_MATMAS which in turn uses MASTERIDOC_CREATE_MATMAS to create and distribute material master IDocs.
Fm MASTERIDOC_CREATE_MATMAS belongs to function group MV01 in package MGV. Here you will find the user-exit function group XMGV.
Perhaps EXIT_SAPLMV01_002 might be useful for you.
Regards
Uwe

Get the value of a particular field in a segment of an Idoc

Hi All,
I have a requirement where I need to write a report which will fetch the value of a particular field in a segment of an idoc.
I have the idoc number segment and field name as input parameters by which I can fetch Sdata from EDID4 but the confusion is how to find the exact field value from that Sdata. How to Map the SDATA to the segment structure.
Please advice...

Hi,
I have one last doubt that may be you people can help with... The user will be giving the segment name and field name as input. So by following Kesav's code while i can get all the values in the segment structure at runtime please suggest how to display any one field from that structure given that that particular field will come at runtime.
EX: user gives an idoc number 123 (say belonging to Orders basic type)
segment E1EDK01
field BELNR.
So i need to display the value of E1EDK01-BELNR of idoc number 123.
Please suggest how to achieve this....

Error when Adding a segment to an IDOC

Hi I have added one segment to an IDOC through one user exit and it is giving the error with status 26.
Here I am pasting the error details,
The segment E1IDT02 does not occur at the current level of the basic type PEXR2001 (extension ).
This error can have several reasons:
The segment E1IDT02 is assigned to a group whose header segment does not occur.
The segment E1IDT02 does not exist in the syntax description of the basic type PEXR2001 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Can any body help me, and let me know what can I do to avoid this.
Thanks,
Deepak.

Actually in the basic type of IDOC, there is no segment with this name. But I am adding this directly in an user exit. Can you tell me what is the actual procedure to add a new segment to the basic type of IDOC
Thanks
ravi

IDOC-Segment Created a idoc document against Billing document

Dear All,
Thanks in advance.
Already created a idoc document against Billing document and one of the IDOC segment is not in the IDOC document output segments(WE05) actually it missed the segment.
so i want to add the segment which it was missed during generation of IDOC document against billing document.
Example:
a) IDOC document misses one segment let suppose "Seg1".
b) In "Seg1" it have only one field let suppose "Field1".
c) But "Field1" does not have any value while generation of IDOC document so it doesn't create the respective segment in IDOC document.
d) so here, i want to edit the IDOC document to add the "Seg1" in the IDOC document and reprocessing the IDOC document.
Please help on this issue.
Regards,
Sridhar.

Hello,
          If your requirement is to have the Segment even with only 1 Field, you'll have to create an Idoc Extension in WE30.
         In order to populate the Custom Segment, Use the Customer Function '002' in the IDOC_OUTPUT_INVOIC which is EXIT_SAPLVEDF_002 where you can actually insert the Segment as a Child Segment of an Appropriate Segment.
        You can go for Custom segment with the IDoc Extension so that you dont have to manually insert the Segment again and again while reprocessing it.
Thanks and Regards,
Venkat Phani Prasad Konduri

Populating the SEGMENT attribute for IDocs

When mapping to an IDoc, each IDoc data element has a corresponding SEGMENT attribute, which I assume is the sequential segment number of the segment in the IDoc.
Does that value need to be set, or does the IDoc adapter take care of it? If I do need to map it, how can I do it, because I would need to find a way of generating a running number either in the mapper, or externally in an XSL mapping file.

Hi,
OK thanks for explicitly stating thae answer! I was hoping for that.
BR,
Tony.

How to include segments to standard idoc PEXR2002 ..

How to include the below segments to the standard idoc PEXR2002 ..
E2EDK02
E2EDK12
I want to map the check number to E2EDK12-BELNR depending on the document number.
I have a recording in shdb..but my real question is it where to have this logic..
Any suggestion would be highly appreciated.
Thanks,

U will have to create IDoc Extension for this.
Goto WE30 select the Radio button Extension.
Link it with the basic Idoc Type.
Then attach the new segments in the IDoc.

Use of segment E1KONP in IDOC COND_A01

We are today using the VARKEY field in segment E1KOMG in IDOC COND_A01 with all the fields in the spesified condition table for a condition type.
Instead of generating X quantity of IDOC´s we would like to repeat the segment E1KONP with different customers. All the other fields in the condition table have the same values.
The field customer is available in segment E1KONP.
What can we do with the IDOC or other configuration to tell the IDOC using customer from segment E1KONP and not from field VARKEY in segment E1KOMG? We still need to use VARKEY for the other fields in the condition table, since we use som Z fields in our condition table.
I am struggling findig documentation according to our problem.
Best regards,
Terje

Hi Terje Pedersen,
Did you get a solution to your problem?? I too am facing similar kind of problem. Instead of multiple IDOCS for COND_A01, I need to create only one.
Please suggest.
Thanks & Regards,
Abhishek

Problem filling segment E1BPADR1 in idoc Salesorder_createfromdat201

Ladies and Gentlemen,
I have a problem with populating segment E1BPADR1 in idoc SALESORDER_CREATEFROMDAT201. My client is already using the idoc to successfully post Inbound Sales orders. Now, they wish to add additional address data to the Sales Order Partner Address screen. The standard partner segment (E1BPPARNR) permits them to fill some data which they are presently filling (i.e. Name 1, Street 1, Country, etc), but they have a requirement to fill additional fields Street2, Street3, etc.
When I add fill segment E1BPADR1, the data in segment E1BPPARNR is removed from the created Sales Order so that the data from segment E1BPPARNR is deleted, and no new data from E1BPADR1 is updated.
Has anyone experienced similar problems, and any ideas on how to get around it? Points rewarded for useable suggestions.
Regards,
Steve

Done

Idoc segment version in idoc type

hi,
we have just upgraded our R/3 system from 4.6c to SAP ECC 6.0. We then tried to send idocs to SAP XI 3.0 SP 20. However the idocs failed due to wrong segment version of idoc. It did not match the loaded metadata in XI. I know that in WE20 you can control the segment version used to send to XI. In the communication channel in XI you can also set the segment version.
So my question is: Is the correct way to handle sytems requiring diffenrent verions to import the newest metadat in idx2 and then control the versions asper the above paragraph?
Any comments are apreciated.
kr Rasmus

Hi,
for sending IDocs to XI no adapter is necessary. It should be enough to reload the metadata in idx2:
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Regards
Patrick

Error when segment of an IDOC is edited in we31

Hi All,
I want to edit an segment of an idoc in we31, I want to add new fields to a segment. When I try to do this i get an error message "Segment type E1BP****** is flagged as generated". How can i edit the segment in this case now?. Is there any customizing related to it.
When i see this segment type in table EDISEGMENT, it is marked as generated (field generated is set to X)
Edited by: Devendra A M on Feb 5, 2009 7:03 AM

I guess you can do one thing ... you can CANCEL RELEASE the segment and then make necesasry changes and then again RELEASING the segment.
you can also visit this link
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
in that you go to the "Change Segment" sub-topic.
Edited by: Premal Mistry on Feb 5, 2009 11:47 AM

Parent segment occurrence in IDOCs

Similar Messages

Maybe you are looking for