Parent Text Body Frames

Hey,
first of all, nice job on Muse. It gives me the opportunity to serve clients who want a small nice looking website and do it fast.
When I work in indesign and add an alternative lay-out (for ipad), the textframes copy and parent the original textframes. When I change text in the parent textframe, text changes also in the alternative lay-out. Although it could use some extended features in indesign also (like parenting textframes after you added an alternative lay-out), this is a timesaving and safe method for editing and changing text. Since Muse is developed by the same team, i wonder if this could be a feature in Muse.
I know this must be a huge development but it would make the lack of responsive lay-out a bit more bareable.
Maybe the possibility of parenting a word-file. So when the word file changes, the text in the muse-file changes.
Thanks for your time reading my idea

Similar Messages

How to send plain text body in HTTP Post method ?

Hi Exeperts,
I have a scenario http post - ptoxy. Sender sending the data in http post in plain text body (only field values will be in the body).
how should i capture this plain text for receiver to map..
is any udf or xsl code ?
please guide me for achieving this requirement .
find the attachment for http post body value.
Regards
Ravi

Hi Mark,
Thanks for your reply,
Please share you have any udf for this .
can you explain me how should i map to target side.
what are the configuration should i done in communication channel level
Regards
Ravinder.s

How do you verify the size of a large ( 32K) plain text body

Hello All,
I am running GW 8.0.2 Hot Patch 3, using SOAP schema 1.04.
When I attempt to process a message, that contains only a plain text body with a size (in bytes) of 64,382 - the following sizes are reported by objects extracted from GroupWise, via SOAP calls:
Message Size: 71,425 (should be bigger than the plain text body).
Message Part [0] length: 70,854 - no idea where this value comes from
In the getAttachmentResponse object, the part has:
length: 87,772 - Which matches the Base64 encoded length, plus padding, of the plain text.
The actual size of the plain text (on disk): 64,382
I am hoping to use the HTTP GET method for extracting the large plain text object, which means that I will not have access to the getAttachmentResponse object.
So my question is, based on the MessageBody, MessagePart[0] length of 70,854 - is there a formula, or other way to determine the correct expected byte size of the plain text object to enable me to verify that the HTTP GET operation or the SOAP getAttachmentRequest completed correctly?
Regards,
Dave Stiller.

Hey Preston,
Thanks for the prompt response. Not the answer that I was seeking, but none the less an answer. Thanks.
Can I suggest an enhancement for a future release, to add an additional structure to the message object that allows you to detail the available formats and byte sizes of the formats that relate to the message body object. This could even be an extension/completion of the MessagePart object array on the Message Body. (One array component for each available format.) There are no issues when dealing with large body texts as attachments, but an accurate byte count is important to me.
This will enable us to verify that the message body content, downloaded from GroupWise, has not be corrupted during transfer - particularly important when using HTTP requests.
Have a great day,
Dave...
Originally Posted by Preston Stephenson
You will have to be careful in getting message bodies.
The plain text message body can come from different
sources and / or formats.
The message body can be stored in RTF format.
You can extract the plain text from the RTF text.
If there is a text.htm message body attachment, the
GW Client will extract the text plain text from the
text.htm attachment and will ignore the text plain
message body attachment.
There can be corruptions in the message body
attachment. The attachment can report a certain
size, but the actual data may be different.
You have to assume what is stored / returned is
correct. If you are bound and determined to read
the number of bytes recorded, you can cause
problems. There was one case where the attachment
was corrupt. The POA returned all the data that
was available. The application tried to read past
the end of the valid data and caused the POA to
crash.
You get all of the data in one HTTP GET call. In
that case, the "Content-Length" header will have
the number of bytes in the message body attachment.
Preston
>>> On Sunday, August 12, 2012 at 11:36 PM,
stillerd<[email protected]> wrote:
> Hello All,
>
> I am running GW 8.0.2 Hot Patch 3, using SOAP schema 1.04.
>
> When I attempt to process a message, that contains only a plain text
> body with a size (in bytes) of 64,382 ‑ the following sizes are
reported
> by objects extracted from GroupWise, via SOAP calls:
>
> Message Size: 71,425 (should be bigger than the plain text body).
> Message Part [0] length: 70,854 ‑ no idea where this value comes from
>
> In the getAttachmentResponse object, the part has:
> length: 87,772 ‑ Which matches the Base64 encoded length, plus padding,
> of the plain text.
>
> The actual size of the plain text (on disk): 64,382
>
> I am hoping to use the HTTP GET method for extracting the large plain
> text object, which means that I will not have access to the
> getAttachmentResponse object.
>
> So my question is, based on the MessageBody, MessagePart[0] length of
> 70,854 ‑ is there a formula, or other way to determine the correct
> expected byte size of the plain text object to enable me to verify that
> the HTTP GET operation or the SOAP getAttachmentRequest completed
> correctly?
>
> Regards,
> Dave Stiller.

Picture in text body

hi all
How to send a mail with pictures in text body ?

Its not the right place to discuss....any way....
Just open the function module
SO_NEW_DOCUMENT_ATT_SEND_API1 and see the Documentation,.....at the last you can see a sample code how to send amail in .bmp IMAGE file...Hope this helps...next time please post in the relevant forum...
regards
sas

HT3228 I have one of the origin iPads. Suddenly when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

I have one of the original iPads. Suddenly (from yesterday) when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Changing text within frames without adding space at bottom

Anyone know if there's a method for changing text within frames so that the successive text automatically flows into position without creating blank space at bottom of that current or a subsequent frame?

Peter,
You can combine the discussions if you want. I actually deleted a sentence beginning the second discussion explaining that it was related to the first. I thought it might impede the discussion.
Let me describe my problem more completely. I'm adjusting a book that was carefully crafted using frames for each page so that the text extended to the bottom of each page (frame). This often splits text within a paragraph between two pages. This was done so that the customer doesn't feel they are purchasing any blank space and for the aesthetic purpose of filling each page with text. The only exception is the beginning of new chapters or sections.
The problem is that I want to change a word here and there in preexisting paragraphs. When I do, space often one-third the page length is generated at the bottom of a page (frame). To fill that space and extend text to the bottom of the page again requires -given my current understanding of options- selecting the paragraph (beginning on one page and completed on the second) that has become interrupted by the blank space and performing a "keep lines together" option. Unfortunately, this usually generates new blank space on a subsequent page, requiring a new "keep lines together"; in a seemingly unending regress of this procedure.
What I require is a method enabling me to add text within a paragraph that will avoid the generation of the blank space by flowing the subsequent text (composing one or more paragraphs and splitting a paragraph between pages if required) to the end of the page; completely filling the page without requiring any use of "keep options" or whatever.
Richard

Hotmail draft and forwarding - text body disapears using Windows 7

hotmail draft and forwarding - text body disapears using Windows 7
== This happened ==
Every time Firefox opened

See: http://support.mozilla.com/en-US/kb/Blank+messages+in+Hotmail
The following add-on will clear the cache in one click on an icon in your toolbar. Note in the information on the add-on page, that <u>'''you must use "Customize Toolbars" function to add the icon to your toolbar'''</u>.
Clear Cache Button: https://addons.mozilla.org/en-US/firefox/addon/1801/
Also see:
http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
http://kb.mozillazine.org/Toolbar_customization

Hang Heading Text outside Frame: Can it be done?

We use text frames that only take up half the page width.
Occasionally, I have a top level heading that breaks onto a second line. I would prefer to keep this text on a single line and have it break out of the text frame (either to the right or the left, depending on the odd/even-ness of the page).
I know I can cut/paste the heading into a new text frame, and apply space above the next body paragraph, but:
this is messy
this breaks the text flow between frames etc
Is there any way I can set a single paragraph to 'break' the border of the text frame?
thanks

Hit Escape (the entire cell gets selected), hit Escape again (the cell is deselected and the cursor is at the farmost left position), hit Move Left. Now the cursor is in front of the table. Hit Shift+Right twice, or Shift+Down once, to select the table and its hard return.
And then people may ask you to stop hitting your keyboard

How can I include the article text/body in the RSS feed of the wiki updates section?

I recently migrated from Snow Leopard Server to Lion Server. Largely, because some people had trouble accessing via their PC under SLS.
Our primary tool is the wiki.
In Snow Leopard Server, we could generate an RSS feed for specific saved searches or recent changes/updates, adjust article length in the RSS feed, etc. Using a feed burner, like Feed My Inbox, we were able to have a daily digest "emailed" to a mailing list. Whereby, we'd get an email of any wiki articles that had changed, along with text from the body, so we can see the changes to the article in the email.
With Lion Server, the only RSS "feed" we can find appears to be on the Updates page. Which is fine. Are there others?
Second, the we can't seem to change the article "length" at all. All we see on the Updates feed is the title, change date, who made the change. We used to be able to see a few sentences of the article body/text for each article...not just the title, but some of the changes.
Of course, our feed burner, now only sends along the article title in the digest...no text beyond that.
We've used the built in push notification in Lion Server, but again, that sends a nice email saying Wiki Article Title "X" has been modified by User "Y" with the date/time stamp. You can click the link to read more, but no article /body is sent.
Is there a way to generate an RSS feed/link that shows not just the recent updated titles, but the first few lines of text in the article body itself in the index/summary?
I appear to be missing an easy way to generate RSS feeds, based on search criteria. And changing the article length in the sidebar, to max, never seems to show any of the wiki article.
How can I show a portion of the wiki article body/text underneath the title of the article in the RSS feed in Lion Server? Not just the article title and changed date?

About a month ago, I spend zillion hours to migrate from Eudora to Mail.
Eudora has been wonderful to me since Day 1 back in the early 90's. But, it has been discontinued as a commercial product. I had used the Japanese version of Eudora for several years, but it did not like communicating with Exchange at work.
I tried and tried various email clients before settling on Mail.
When I pictured interactions among my Mac, iPhone, and whatever email client I choose, Mail was just the simplest way. But, Mail is not Eudora. And, I dearly miss Eudora.
If there is no way to alter the contents of received email in Mail, I would have to adopt your approach on a case-by-case basis.
Thanks for your help, though.

I Can't separate text in frames from repeating

CS4 Flash Pro v:10.0.2
Win 7 Pro
I have been working on a Flash site for a while - and learning quite a bit over the past 2 years. This is my first Flash design website and I can't see where I went wrong.
At some point last year I removed subsequent frames and began duplicating the text to show symetry. Now, my customer wants to add different information in the adjacent frames, but I can't remove the adjacent duplications.
Example:
Frame 6 has text-A (Sample X in the PDF Image below)
Frame 7 has text-A (Sample Y in the PDF Image below)
Now I want Frames 6 and 7 to have different text - unlinked in all frames, and the final tween frame.
When I edit either of the 8 Frames contents, the text changes for the adjacent frames. Luckily, the first 2 tweens contain separate information, so those are not linked to these last 2 (Sampe X and Y). How do I separate the frames so I can have different information, but I do want each Sample to contain the same text? I DO NOT want Sample X and Sample Y to mimic each other. Each tween is 4 frames in length, and each frame is duplicated. However, I want Sample X separate from Sample Y.

Rob, thanks for the promt response.
My example image identifies Sample X and Y as my current work. What I am referring to is that the text inside the movie clip of Sample X and Sample Y are identical. When I edit the text/content in the Movie Clip for Samply Y, it changes the text in X automatically. I want them to be separated, so the content in each movie clip is different.
If you visit the website http://www.playonkc.com/ and select Training, you can see the content. When you click on the + bubbles on the right, if pulls up each months training.
Somehow my .fla file contains linked months. So inside each movie clip, the text for months July/August & Sept/Nov are linked. When i edit the contents of one, the other changes. How do I separate them, so they are independent of each other like Feb/Mar & May/June.
It has to be either a Key Frame, or Frame edit, but when I just change the text contents of one frame, Flash automatically changes the text contents of the other Movie Clip (Sample X and Y below.) They are linked together somehow....

Why the text field frame's line width cannot be adjusted?

I am now working on a PDF file with some text fields with combo turned on, specifying the number of chars the fields can hold. Their frames' line width is not thick. This is what I want. This is shown in the picture below:
But when I try to preview the PDF, I discover that these fields do not follow what I have specified: no matter what thickness I choose, the frames are always thick. I want them to be thin!
See below:
Why is it so? What should I do? Any ideas are welcomed.

I have sent my form to you to take a look. Thanks for your support!
By the way, I have uninstalled Acrobat 8 and installed Acrobat 9 Pro, but I am facing serious problems. Whenever I open Acrobat I will face an EULA page and if I click "Accept" or "Decline", the whole program will close immediately.
I have googled and added an EULA value (=1, in hex) in the regedit. No effect. I want to uninstall Acrobat 9, and there is NO RECORD in the Install/Uninstall section in the Control Panel. I am using Vista Home Basic.
I am now frustrated. I tried Acrobat 9 and it failed, and now I can't even uninstall it and revert to ver 8.......My God....

Outllook clients sending partial messages, truncated text body

I am stumped on this one and could use a little help.
Several clients are experiencing partially truncated emails both sent and received.
It is happening on Outlook 2003 and 2010.
The Sent Items folder also shows the truncated email.
For instance, lets say I, Mike, type out a 1000 word email to my friend Jane. Jane receives an email that might only have a few sentences and it might cut off right in the middle of a sentence. I check my Sent Items and it only shows exactly what
Jane received which is much less than I typed. Most of my text has simply disappeared.
I see others with similar issues but it is usually the entire message body that is missing, not partial text missing.
I have opened the sent item using the web interface and it is the same problem.
The Exchange server is 2010 Standard Edition running on Windows Server 2008 R2 and I recently updated all OS patches, Exchange SP3 and Update Rollup 4 for SP3 and my issue remains.
Also, I have documented at least 1 case where the sender and receiver both have Outlook 2010, although most of my users have Outlook 2003.
In addition to all the troubleshooting listed above, I have also used every known to me AV scanning tool such as Combofix, RKILL, TDSkiller, MalwareBytes, HitmanPro etc.. Nothing out of the ordinary found.
Here is a comment from someone else with the same issue. This was copied from Experts-Exchange.com
Same here. Exchange 2010 Standard 14.3 build 123.4 in a Win2008R2 SP1 with all latest updates installed.
Also this user in this thread has the same problem: Outgoing emails truncated.
After I read his thread and your thread, I think that it isn't an isolated problem...
Outgoing messages bodies are truncated. When it happens, only few words or few sentences remained. The rest of the typed text disappeared.
Affected messages are shown truncated in Outlook and also in OWA sent emails.
The problem began 2 weeks ago, but now it's spreading.
For now it seems in my company that only Outlook 2003 clients are affected.
At the beginning only 1 person reported me the problem, so I thought it was an isolated client problem. I tried to reinstall Outlook 2003, but it continued. Then I tried to install Outlook 2010 for troubleshooting purpose, and in the last week that person didn't
reported me any problem.
Then it began to spread. It happened to a different person. And then to another one. At the moment, 5 persons reported it. All these persons have Outlook 2003.
Maybe an automatic Windows update could have caused the problem in the clients?
It's hard to find out.
It seems that the problem is present in emails that take a long time to write them. Maybe the affected sent email is the first one auto-saved... For testing I disabled the auto-saving (every 3mn) drafts function in the affected Outlook 2003 clients. They reported
me no problem in the last days.
But I told them to always check sent emails and to continue to do that.
I will report as soon as I have new feedbacks.
ANY help at all would be greatly appreciated!!!!
Thanks

Turn off "Auto-save messages every XX minutes"
Outlook sends the saved portion, not the entire email.
Note: This partial message is not saved in Drafts, but in memory.
Outlook 2007:
1. On the Tools menu, click Options
2. Make sure you are on the “Preferences” tab.
3. Click the “E-mail Options…” button.
4. Click the “Advanced E-Mail Options…” button (about half way down the window).
5. Uncheck the first checkbox “AutoSave items every:”
6. Click OK 3 times to close all the windows
Outlook 2010/2013:
On the Tools menu, click Options.
On the Preferences tab, click E-mail Options, and then click
Advanced E-mail Options.
Uncheck the AutoSave items every: x minutes check box.
In the minutes list, specify how often you want the program to save your data and the program state.
If you set more minutes in there, you only postpone the issue.
Turn it off.
Note: IMHO it is better to lose work and know it, than to think you sent an email when you really did not.
Eric Anderson

How to set textfield.text on frame after goto

This seems a little ridiculous to be asking this question coz
it seems like it should be so simple but here goes anyway.
STEPS TO RECREATE:
Step 1 - create a class called simpleButt(see attached)
Step 2 - create a MovieClip with two frame labels on
different keyframes- ROLLOVER and ROLLOUT. on these different
keyframes place a dynamic textfield with instance name -
'buttonTitle'. give it different styling attributes on the ROLLOVER
frame such as text colour, bold or even a glow filter.
Step 3 - In the movie clip's linkage properties, give it the
'simpleButt' class.
Step 4 - With nothing on the stage, add the following two
lines to frame actions:
var newButt:simpleButt=new simpleButt("hello");
this.addChild(newButt);
Step 5 - compile!
this should add a simple button to the stage and set the
button's textfield's text property.
However, after going to another frame on rollover, we lose
the dynamic text - i assume because we have another instance of the
textfield on a different keyframe because it has new styling
properties on rollover. but if i try to set the text after going to
the new frame, it doesn't seem to recognise the textfield yet.
(uncomment lines in simpleButt to see what i mean)
through trial and error i've found that if i wait two
ENTERFRAMEs, the textfield object becomes available, but by this
time the textfield flickers. is there an event i'm missing or
function i could override where i could set the properties of an
object on a frame after a gotoAndStop before it is rendered?
cheers
Craig

STEP 2(where the textfield was created) is all done manually
within the authoring environment - no actionscript. This is usually
done by the design team here so to save time i'm trying to avoid
replicating every style change they've made in code.

Fitting text to frame.

Hi, from what I read, there is no real option to auto fit text to text frame like you can do for an image so looking for a work around. We load a lot of data from xml files into pre-built assets through Apple Scripts so want to try to avoid having designer go in and manually fix the exceptions that don't fit. I've been trying to use a paragraph style's justification options to do and it seems do a little of what we need but seems to only do if no spaces in text like 123456789012345678901234567890 then it will squeeze it on one line but if 1234567890 1234567890 1234567890, it will not. Not sure if this is the best way or not. Here is what I have in my paragraph style

The last thing you want to do is scale your text horizontally or vertically to fit copy to a page. I'd only ever do this for text that needs some sort of special effect look or something. I think it's pretty bad for anyone to use scaling to fit copy to a page to bring back two lines.
What you can do is look at the leading, perhaps reduce it by .25pts or something for the page.
Or select all the text and reduce the space between the letters http://www.adobe.com/education/webtech/CS2/unit_planning1/idb2_leadkrntrak.htm
But you don't want to overdo it, or the text will look all squashed up and unreadable.
I usually go for about -5pt, but no more than that.
I'm sure others would have their methods too, but scaling or squishing text using horizontal or vertical scaling just distorts the shape of the letters.
Ultimately you don't want to change anything and perhaps look at other elements on the page that you could alter to bring back the two lines.

IMessage combining child and parent text messages

When my child sends a text message it appears that the message comes from me, the adult. When I try to text my child she doesn't receive the message and I text myself.
I've tried to find ways to untether child/parent but I can't.
my iMessage settings show only my Apple ID, email, phone number
child doesn't have a computer of her own
I logged into her iCloud but didn't find settings that applied to imessage.
Please help, I am flooded with tween-aged text messages!

Thanks Radiation Mac,
I have a Mac and she only texts from her phone. I think your instructions are for a Windows system maybe?
Whichever Apple ID is currently logged into "iCloud" (located in Applications>System Preferences>iCloud) will be the Host who's iMessage account is sent from.
Anyway, you gave me a great tip.
iPhone Settings
Messages
Send & Receive"You can be reached by iMessage at:" her cell phone number was in this space.
My life is good once again.
OMG! ttyl - you saved me from tween ****.

Parent Text Body Frames

Similar Messages

Maybe you are looking for