Parental Controls are not working correctly. Websites I've listed under Allow Access are still blocked. How can I fix this?
Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?
Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly
Similar Messages
-
I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer. -
When viewing most text on most websites, it displays properly. However, there are two instances where text will either tend to, or consistently, become jumbled into a mess of seemingly random characters. Oddly enough, these seemingly random characters are not, in fact, random. The same weird character will be used to replace the same regular English text character consistently across the entire area that has been jumbled.
The two instances where this tends to occur most often, or consistently in some cases, are, first, when a paragraph or particular section of formatted text contains special characters, such as Chinese or Japanese characters, or accented letters. When this happens, usually the paragraph that contains the special characters is completely jumbled, while the rest of the text on the page will have intermittent jumbling on a word or two. Most often, the word "the" is jumbled in this case.
The second instance where this happens is when a website uses specially formatted text in some form or another. I, not being an expert at web development, am not sure what kind of formatting causes it, but I can provide consistent examples in lieu of my experience:
- Example 1:
[http://img408.imageshack.us/img408/9564/firefoxcharencodingissu.jpg]
Example 1 shows a portion of a screen-shot of the website "Joystiq.com". Every single article title on the front page of this blog is consistently jumbled, while the text of the article itself remains untouched. Please note that when this jumbled text is highlighted, it is visible un-jumbled in the right-click menu as well as in the source code of the page. Other consistent instances can be found within many search fields on various websites. For instance, the search bar located at the top right of "Kotaku.com" consistently displays jumbled characters both on its default text of "Search" and on any text that is typed into the search box itself.
- Example 2:
[http://img822.imageshack.us/img822/9564/firefoxcharencodingissu.jpg]
Example 2 shows both the jumbling of the paragraph containing the character "☆" as well as the subsequent peppering of the rest of the article's text with small jumbled words. Below this is the DOM Source of the selected text which shows how the text itself is being rendered properly within the site's source. Additionally, for convenience, I have edited on to the bottom of the image a small snippet of what the search bar on the same page looks like. Notice how the grayed-out text that normally would read "Search" is instead jumbled.
This issue has been plaguing my browser for the past year or so, and I had hoped that it would go away with subsequent Firefox updates. It has not gone away.
Thank you for reading! Please help!This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica<br><font face="Helvetica" size="25">abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ</font><br>
Helvetica Neue<br><font face="Helvetica Neue" size="25">abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ</font>
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page.<br />
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps -
My intunes stopped leting me connect my ipod or nconnect to the itunes store. So I uninstalled itunes and all apple software an tried reinstalling several times. After each instal I get the following error message.
"iTunes was not installed correctly. Please reinstall iTunes."
error 7 (windows error 126)iTunes for Windows: "Error 7" message when opening iTunes
For error 126: http://support.microsoft.com/kb/959077 -
Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.
Thanks for your quick reply. I tried a number of different values. Usually when I do a negative offset they're very small values, like -.25 or -.5.
An Update- I took the art work into Ai CS 6 and It still did not work, which is really strange. And I've used it hundreds of times with success in the past. Also I tried it with live type and outlines, ungrouped, un-compounded still could not get it to negative offset.
Thanks for the help. -
My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?
Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html -
Since updating to iOS7, my iPhone 4s is not connecting to Wifi. I'm not even able to try and turn it on through my settings. How can I fix this?
I'm not sure if this applys but when people updated to iOS 6 they encountered a issue that was the same as yours their wifi was grated out but the could see the toggle
Can you see this or could you define the look of you wifi toggle. -
im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless I talk right next to the mic but it sounds low . how can i fix this
- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPad does not 'ring' when a FaceTime call is coming in..the volume is up...
How can I fix this?It might be a good idea to reset network settings & reboot your modem:
Open Settings->General->Reset->Reset Network settings. You will have to enter your wifi passwords again.
Also go to Settings->Safari->Clear History & a Website data. -
I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.
You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
* https://www.squarefree.com/bookmarklets/forms.html#remember_password
You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3). -
Parental control is not working correctly
hi,
when I initially got my iMac, it seems the parental control I set up for my son's account was working fine with respect of the time allow to use the computer but not it does not work.
no matter what I tried (limit computer to use, weekend time limits, or bedtime), it does not work
is there any upgrade or fix for this?
thanks
adaltamI have the same problem. If you've found the solution, please share.
-
I updated to 5.0, added webmail adblocker and adblocker, and it would not work at all. I uninstalled, and reinstalled without the addons and it still did not work. Troubleshooting said to remove from firewall settings and re-add, which I did, but Norton Security Suite will only do "allow" and not "Auto". I can now access a page to a website, but can't log in (ie: yahoo mail, facebook, etc.)
I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine, -
I get no audio output from internet videos like tutorials for the new ff beta and such but it works fine when I run Windows Medial Player latest version . Is there an easy way to correct this or check for a correct fix ?
Try to install the new WMP plugin
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins -
They were working up until today and I didn't update anything and my trackpad is still working otherwise.
I've tried looking in the Preferences menu, which had nothing that could help me.
PS In 10.6, there is a Kotoeri preferences box at the bottom of the first tab called "Show Predicted Candidates". Is this checked for you? (I think in 10.4 this is still in Japanese and might be different). In the third tab, there is also a setting related to the number of conversions. And in the last two tabs there are dictionaries that can be either open or closed. I gather you have tried all of these without success? -
I thought this was a reputable company. I am having serious doubts.
Hi,
I am sending you a private message to get some more details. Please check.
Regards,
Anoop
Maybe you are looking for
-
Image resolution of inserted image
I'm creating a PDF e-book for a friend: I scan an image (line art) as a 200dpi greyscale jpg in photoshop. Looks sharp on screen and when printed. I scale down the image from 100% to the size I'll need it in Pages (3" wide). Move over into Pages and
-
Need help for importing oracle 10G dump into 9i database
hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower versi
-
How to define interface of IDOC?
IDoc outbound: In step 1, a new file is generated with the transferred IDocs by the IDoc Interface. In the second step, the program ¡°rfcexec¡± (synchronous RFC) with the path to an executable program is called (here: ¡°out.script¡±) and also the pa
-
I have already tried changing the caret scrolling option, that's not it.
-
MacBook Pro 15" mid 2012 repeatedly crashes due to graphics hardware failure.
I'm dead sure it is related to either graphics switching hardware OR the nVidia 330M graphics chip ACCIDENTALLY PRESSED CMD+S AND SUBMITTED THIS TOO EARLY! EDDITING NOW ! PLEASE BE PATIENT