Parental Controls on WRT1900AC

Hooked this up and love the speed boost at home. Question is: every review said there was an option to set time frames and time limits on devices under Parental Controls. This was one of my main reasons for getting it. Unfortunately it looks like there is just an on/off switch. Am I missing something? If not will this be coming in an update?? If not can you please add it to your list?!
Thanks!

To set time frames and time limits on devices under Parental Controls, you need to access your Linksys Smart Wifi Account then click and enable Parental Control. After that, select the device that you want to restrict access from the Restrict Internet access on list and click "Specific Times". Here's how to do that: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=25627

Similar Messages

Wrt1900AC and parental control

Does anybody have parental control on Linksys Wrt1900AC working correctly?
If so, please let me know how you did it?
I spent 2+ hours with tech support and ended up replacing the router at their advise just to find out that the new one does EXACTLY the same thing - does not block specific sites, like youtube..
Thank you
.grig

I hate do deviate from the original tread, but don't know how to separate them now
the device is showing up and disappearing from time to time. I know all IP addresses on my network - that's how i noticed unknown device. The fact that it show connected via port bothers me. I have all four ports in use by known devices and the unknown just show up making it five (wired connections) in the network map. The tech support told me that hubs, switches and network drives will not show on the map. I would say it's a glitch - but it's very consistent. It happened on two different routers and it always show the same IP.
regarding blocking web sites on different computers - yes, I have tried. That's how I started - trying to block specific web sites on my son's computer and set up some time schedule. nothing works unfortunately. I don't know what else to try.

Parent controls don't seem to do anything on WRT1900AC?

I'm familiar with the parent control interface having used Linksys routers for years. But my new WRT1900AC seems to ignore every parent setting I seem to apply. Any tips?
Thanks in advance for any replies. Frustrating.
Bob

Blocking Sites or access schedule?
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Parental Controls via Smart WiFi and Range

I have recently purchased a WRT1900AC. Went through setup and all seamed to work OK. However when using the Smart WiFi it does not provide the option to select "Specific" under Parental Controls. In fact the whole App looks completely different from what is in the user’s manual. In addition I find the range of this device extremely poor. I bought this WiFi router to replace a cheap free one costing one tenth of this one. The most annoying thing is the cheap freebee one has a much greater range irrespective of how I set the antennas. Is this normal.

Please post a picture of what your seeing on the Parental Controls section of the router... What Hardware version is your router?
What Firmware version is currently loaded?
What region are you located? Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have? Wireless Configurations
Ensure the default (linksys) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios for dual band routers. Can be anything and not something that's already in use by any neighbouring WiFi routers.
What wireless modes are you using?
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&respid=0&snid=2&dispid=0&cpage=search
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=acca9b9008f04a66af818c2ab366001e_Positioning_the_external_antennas_on_the_Linksys_WRT1900AC.xml&pid=80&converted=0

Parental Controls Broken After Updating an Application

I'm using Parental Controls (remotely) under 10.5.4 to manage what applications can be opened in a small lab. This works well until I need to update an application on the lab computers. I'll use Firefox as an example, but this happens with all applications.
- I have a version of Firefox on all lab computers (3.0) and Firefox is allowed under parental controls. Everything works.
- I update Firefox to 3.0.1. (In this case, I simply overwrote the older version of firefox, but I get this problem when updating applications with installers.)
- If I remotely look at the Parental Controls settings for the lab computer, I can see that Firefox is still allowed (checked)
- Now, on the lab computer, I log into the managed account and try to open Firefox, I get a warning about the application not being on the allowed list.
- I log out of the lab computer, and again, access the parental controls setting remotely. Now Firefox is Not Allowed (unchecked).
- I check the box to allow Firefox
- Now when I log into the managed account, the new version of Firefox opens.
Some fixex / workarounds I have tried:
- After updating Firefox, I remotely accessed the parental controls settings and first disallowed (unchecked) Firefox, close parental controls, reopened it, and then allowed (checked) Firefox. When logged into the managed account, opening Firefox produced the not allowed error. When I return to the Parental Controls settings, Firefox is now Not Allowed (unchecked). Checking the box to allow Firefox fix the error.
- I've tried restarting after updating Firefox and it did not work.
My guess:
I assume that Leopard keeps a list of applications and versions installed on the computer. Parental Controls allows a specific combination and any update will break the parental controls. To allow this updated application to be opened, its old entry in the list must be updated to reflect the new version. The only way I have figured out how to do this, is to try and open the updated application and fail. Then I can finally allow the updated version.
Does anyone know of an automated or scritable way to do this. I have tried working with lsregister, but have not had any success. I need a way to force Leopard to reload / refresh its list of installed applications, with having a user logged into the console.
For a different solution, does if you can send a UNIX command to machine sitting on it login screen, that will cause the machine to login as a local console user. I could then send "open /path/to/updated app" and a logout to force the application list to be refreshed.
Many Thanks in advance for any help.

Hi! Did you ever receive any feedback on this issue?
I am interested since I have noticed the exact same frustration with Parental Controls since updating to 10.5.
While a very good idea, I think the parental controls, especially with respect to permissions about applications is utterly useless at the moment. It is completely stupid that I have to reset the permissions for applications each and every time I update an application. I have three children who use the computer and I don't want them using every bit of software on the eMac. They are naturally curious and will click on programs that can do damage without realizing is.
I have also turned off any parental controls regarding web browsing but my children still hit many sites that are blocked by Parental Controls. I do have a linux gateway that does the filtering quicker and better.
If anyone at Apple is listening ... please spend some time to fix this for the next update.
Thank you.

With Parental Controls on, Wacom Tablet pressure sensativity will not work.

I run several high-end Mac Art and Photo-based labs and have run into an issue with Leopard's Parental Controls and Wacom Tablets - when I choose to limit the programs that my users (students) can use, Wacom Tablets will lose functionality under those logins - and it seems only to be pressure-sensitive functions. I've tried several combinations of allowing all programs except utilities, with utilities, etc - no dice - I actually have to turn off "limit programs" and that is the only point that it'll actually let me use all the Wacom's functionality under those managed users - is there a way to fix this?

..."I've allowed all Utilities, Applications, etc and no matter what, as soon as I turn on the "only allowed selected programs" option, it won't work."...
I'm not sure, but it is possible that allowing / disallowing based on the pre-defined categories may not work because the software that Wacom uses on my system is in an atypical location, and has an atypical structure - it actually has one application contained inside another. It may be necessary to approve the apps explicitly.
Perhaps try either:
i) Opening "/Library" > "Application Support" > "Tablet" and explicitly dragging any apps present there into the "Parental Controls" pref pane in the panel where the programmes are listed. On my system, the app is called "PenTabletDriver.app"...
or
ii) Logging in to the managed account (with application restrictions in place), and trying to launch the "PenTabletDriver.app" programme. If this generates the "application is not allowed" message, it should be possible to "always allow" with "admin" authentication to white-list it at that stage...

Parental control - desired features

I posted the message below to apple TV feedback page and I though I'd share it with you too, and get a penny for your thoughts; perhaps even brainstorm a bit more on the parental control issue, because WE (parents with young children) need a better and easier parental control...
quote:
"With great power comes great responsibility"... bringing so much digital content to the living room space: movies, music, youtube videos, etc is a quantum leap in our digital entertainment, but this space we share with our young children, thus they need to be effectively protected. Doing this elegantly as well is an art. We want to be able to filter out explicit content (or access to certain rated material, or certain services) easily, securely and hassle free. As of now (version 2.0.2) I can think of TWO reasons why I absolutely don't want the parental control ON (despite the fact that this leaves my young children exposed):
- First, the password has to be enter EVERY time I access something restricted. You would say that this is quite normal, however I'd say it's quite a hassle. If I am the adult ready to access restricted content, I have the option to either turn off the parental control temporarily.. with the hassle of having to set the pin again after I am done... or, I have to enter the pin every time. If i access the restricted material now.. it makes sense that I will also be the one accessing the next restricted material in 5 minutes from now. It's a reasonable time-locality principle. Apple TV should be "smart" enough to know that I just entered a pin to access something a minute ago.. thus not needing to ask for the pin again. This smartness doesn't have to be necessarily implicit.. it could be explicit: apple tv can ask me for how long should it remember the entered pin.
The solution that I have in mind is a Comcast-like parental control that inhibits the parental control for a period of time. Say, i am planning to use the apple tv for an hour.. then I should be able to inhibit the parental control for that given time. This way, I won't be asked to enter the pin over and over again for everything that is restricted. The implementation that I have in mind is: whenever I want to access something restricted.. i will enter the pin.. then instead of just selecting DONE.. I can have the options to unlock for 1 hour.. 2 hours, 4 hours.. and once. These could be easily accessible via the up/down/left/right buttons on the remote (or browse-able)
- The second BIG BIG reason why i don't want the parental control ON.. is that the pin is VISIBLE! If we are all planing to watch something (buy a movie, which is a restricted service, let's say) I will have to enter the pin in visible for my young children to see. Of course this pin will have to be changed later on to something else to make sure the parental control stays what it's meant to be.. a parental control. What good it is a parental control with a public pin?
Solution: instead of visible password.. you can allow the option to click the five buttons left/right/up/down/center in a specific order. How many permutation of 5 buttons can we have? 5! = 12*3*45 = 120, but wait... we can press a button multiple times.. so the total number of codes we can enter is.. whatever you want. e.g. if the codes should have 4 "digits", the number of combinations is 5^4 = 625. Anyway, you get the idea. You should absolutely find a way to replace the visible pin with an invisible one.. using the key combinations is one such solution.
Looking more into the future... a biometric sensor on the remote that will unlock the restricted material instantly by just pressing the finger (fingerprint) on the remote would be awesome. Perhaps this won't make it to the next apple tv remote iteration but it is something that apple is aiming for... ultimate simplicity.
Also an accelerometer based remote would also make the browsing the apple tv content a LOT faster and smoother than clicking buttons (wii-like remote perhaps?). Clicking and holding buttons (quite hard to press for my taste) to go down to the bottom of a 200 song list is quite painful.
Also.. one more thing.. it would be nice to have a HOME button similar to the iPhone home.. One click and i'm back to the main menu. Perhaps a double click on the menu button? I hate having to click 5 times to get out of a music location to get to the main menu. Quicker access please!??
all the best and hope to see these new features soon, so we can ALL enjoy our newly purchased Apple TV.
Thanks.
marius giurgi

I posted the message below to apple TV feedback page and I though I'd share it with you too, and get a penny for your thoughts; perhaps even brainstorm a bit more on the parental control issue, because WE (parents with young children) need a better and easier parental control...
quote:
"With great power comes great responsibility"... bringing so much digital content to the living room space: movies, music, youtube videos, etc is a quantum leap in our digital entertainment, but this space we share with our young children, thus they need to be effectively protected. Doing this elegantly as well is an art. We want to be able to filter out explicit content (or access to certain rated material, or certain services) easily, securely and hassle free. As of now (version 2.0.2) I can think of TWO reasons why I absolutely don't want the parental control ON (despite the fact that this leaves my young children exposed):
- First, the password has to be enter EVERY time I access something restricted. You would say that this is quite normal, however I'd say it's quite a hassle. If I am the adult ready to access restricted content, I have the option to either turn off the parental control temporarily.. with the hassle of having to set the pin again after I am done... or, I have to enter the pin every time. If i access the restricted material now.. it makes sense that I will also be the one accessing the next restricted material in 5 minutes from now. It's a reasonable time-locality principle. Apple TV should be "smart" enough to know that I just entered a pin to access something a minute ago.. thus not needing to ask for the pin again. This smartness doesn't have to be necessarily implicit.. it could be explicit: apple tv can ask me for how long should it remember the entered pin.
The solution that I have in mind is a Comcast-like parental control that inhibits the parental control for a period of time. Say, i am planning to use the apple tv for an hour.. then I should be able to inhibit the parental control for that given time. This way, I won't be asked to enter the pin over and over again for everything that is restricted. The implementation that I have in mind is: whenever I want to access something restricted.. i will enter the pin.. then instead of just selecting DONE.. I can have the options to unlock for 1 hour.. 2 hours, 4 hours.. and once. These could be easily accessible via the up/down/left/right buttons on the remote (or browse-able)
- The second BIG BIG reason why i don't want the parental control ON.. is that the pin is VISIBLE! If we are all planing to watch something (buy a movie, which is a restricted service, let's say) I will have to enter the pin in visible for my young children to see. Of course this pin will have to be changed later on to something else to make sure the parental control stays what it's meant to be.. a parental control. What good it is a parental control with a public pin?
Solution: instead of visible password.. you can allow the option to click the five buttons left/right/up/down/center in a specific order. How many permutation of 5 buttons can we have? 5! = 12*3*45 = 120, but wait... we can press a button multiple times.. so the total number of codes we can enter is.. whatever you want. e.g. if the codes should have 4 "digits", the number of combinations is 5^4 = 625. Anyway, you get the idea. You should absolutely find a way to replace the visible pin with an invisible one.. using the key combinations is one such solution.
Looking more into the future... a biometric sensor on the remote that will unlock the restricted material instantly by just pressing the finger (fingerprint) on the remote would be awesome. Perhaps this won't make it to the next apple tv remote iteration but it is something that apple is aiming for... ultimate simplicity.
Also an accelerometer based remote would also make the browsing the apple tv content a LOT faster and smoother than clicking buttons (wii-like remote perhaps?). Clicking and holding buttons (quite hard to press for my taste) to go down to the bottom of a 200 song list is quite painful.
Also.. one more thing.. it would be nice to have a HOME button similar to the iPhone home.. One click and i'm back to the main menu. Perhaps a double click on the menu button? I hate having to click 5 times to get out of a music location to get to the main menu. Quicker access please!??
all the best and hope to see these new features soon, so we can ALL enjoy our newly purchased Apple TV.
Thanks.
marius giurgi

Having trouble setting up parental controls

Hello, when I set parental controls on the guest account, I still have trouble going to "allowed" sites. An example is, I allow access to google and amazon but when I try to access gmail it won't let me. It says something about a bad connection. The same with amazon; access to the main page is fine but when I try to sign into my account it won't let me.
Am I missing something?
thx

Apparently Parental Controls doesn't allow access to https (secure) sites, which would apply to those sites.

I made my main account a parental control account and when I accessed the account created as admin, at the Parental Control options I deleted my main account and now I can't get back in it. I need help with this problem.

I made my administrator account a parental control account, at the time of creating it, the system asked for my administrator password, to restart the computer, and the new account was created. When I accessed that account at the parental control menu I could see my main account on the list and i deleted the account from that list, and now i'm trying to get back to it but I'm not able to because every time i restart the computer brings me back to the account I created. I searched for help on the web and it says to go to users and select the account I want to restore but I can't do it. Please help.

User account – restore missing admin

How do I install iTunes with a Windows 7 account that uses parental controls?

I have setup a small computer for my daughter to use, running Windows 7 Home Premium. I've enabled Parental Controls through the control panel. So far, I've been unable to install iTunes for her. If I try running the installer as admin, when I try to run iTunes as her, I eventually get a message telling me that itunes64.msi was rejected by the digital signature policy. If I run the installer as her, I get a message saying the system administrator doesn't allow the app to run; I have added the installer to the list of allowed applications. Anyone know how to install iTunes in this case?

Hi mlheidt,
If you are having trouble installing iTunes on your Windows 8 computer you may want to use the following article to help you get it up and running -
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks for using Apple Support Communities.
Best,
Brett L

ITunes can't access shared library when Vista parental controls are on

I started a thread back on March 1 2008, but it got archived before it could be answered, see:
http://discussions.apple.com/thread.jspa?threadID=1420673&tstart=0
I'm using 64 bit Vista with iTunes version of 8.0.2.20, but I don't believe this issue has anything to do with the 64 bit versus 32 bit iTunes versions.
The exact message is:
"The shared library "libraryname" is not responding. (-39)
Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689."
But if I turn off Parental Controls, the shared library is accessible, it all works fine. This has nothing to do with the iTunes store (and potential web site blocking), I just want to allow shared library access while leaving parental controls on.
Any ideas?

This question has been around for almost two years now with no answer...very frustrating and disappointing that no one from Apple can step in and assist. I have set up the port number on my firewalls, both Windows and McAfee, as per the iTunes message and it still does not work...so I am now at a loss.
Turn off parental conrols and it all works perfectly...turn it on and library is visible but not accessible...PLEASE can someone help with this!!!
Thanks.

Safari has stopped working properly since upgrading to Mountain Lion. Have parental controls in place and it will not add websites. Also short cuts at top of tabs now all messed up!

Since upgrading to mountain lion the other day (from lion) safari has not been working properly. I have parental controls in place but seem unable to add new web pages to allowed list - wasn't expecting to have to anyway - these are webpages that were working perfectly well on safari prior to upgrade. Also the shortcuts above the tabs on safari are all now messed up.
Any advice on how to fix - I am not a computer expert so keep it simple please!
In the meantime I am having to use Firefox.
Thanks
Andrew

Since upgrading to mountain lion the other day (from lion) safari has not been working properly. I have parental controls in place but seem unable to add new web pages to allowed list - wasn't expecting to have to anyway - these are webpages that were working perfectly well on safari prior to upgrade. Also the shortcuts above the tabs on safari are all now messed up.
Any advice on how to fix - I am not a computer expert so keep it simple please!
In the meantime I am having to use Firefox.
Thanks
Andrew

Really confused here. I have somehow created both a managed account and an administrator account. The admin acct is now highlighted in system preferences. We are now blocked from using our computer because parental controls keeps popping up.

In attempting to add a music lesson program for my daughters band lessons we have messed up our computer. I now have both a managed account and an administrator account (both in my name). It is using the managed account now and not letting use the Internet because parental controls keep popping up. I would like to delete the managed account and get back to the admin account but I have no idea what my login is for the admin account. We have never had to use it before this problem started and what we thought it was when we set it up does not work. Any ideas?

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

HT1420 How do I set up parental control on book downloads? My daughter and I use the same Apple ID info.

How do I set up parental controls on my apple account, I want to censor the books that she's dowloading. We use the same account Thanks!

Turning off in-app purchases and the App Store itself would be the best bet for you. You can always unlock these features as needed and lock them again.
Apart from restricting purchases, there are a number of other restrictions you can setup. You can even setup a safe browser with remote parental controls from the App Store, like the one from Mobicip. You may find this tutorial to be helpful: How to setup Parental Controls on the iPad.
Hope this helps.
Disclaimer: This response is posted by a Mobicip representative who may stand to gain indirectly from it.

Why can't I use some form of parental control like IE to make it safe for my Kids?

I am just about to remove Firefox from my pc because I cant figure out how to protect my kids from the crap that is on the web!! I don't want them accidentally getting to an adult site.

Also, for some (somewhat limited) parental controls in Windows XP, see: http://www.ehow.com/how_5928183_set-parental-controls-windows-xp.html
Generally, the products mentioned in cor-el's post are more comprehensive than those provided from within Windows XP.
 
The plugins submitted along with your question, indicate that your have out of date plugins with known security issues. For security reasons. you should update them. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Shockwave Flash 10.0 r32
*Java Plug-in 1.6.0_04 for Netscape Navigator (DLL Helper)
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from one of the links below; '''the links take you directly to the download and you avoid the "getplus" download manager and "extras" (i.e., toolbars, virus scan links, etc.) on the main Adobe page.'''
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download links and other information''':
#** https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#** '''or''' you can download, save, then run the manual installers for IE, then for Firefox (and all other browsers) from here: http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
#* After the installation, start Firefox and check your version again.

Parental Controls on WRT1900AC

Similar Messages

Maybe you are looking for