Parental Gate on DPS ?
We created an app for kids using DPS but Apple rejected it for two reasons. The biggest one is the following:
24.3
We noticed you have designated your app as primarily intended for kids under the age of 13 but it includes links out of the app or engages in commerce without first obtaining parental permission. This is not in compliance with the App Store Review Guidelines.
Specifically, your app includes In-App Purchases that are not behind a parental gate. To be in compliance with the App Store Review Guidelines, purchases must be behind a parental gate, and the parental gate may not be disabled.
It looks like DPS can't implemet a parental gate to stop kids to buy issues without asking the parents... Is that correct?
I'm attaching the images so you can help me with that..
You are correct, there is not a good way to this in DPS. We spoke with their staff about it, and they stonewalled at introducing a universal solution.
Their stance is that as an enterprise customer you can use a custom storefront to perform the gating where necessary. (And if you're not an enterprise customer, you're presumably SOL.)
That leaves you without a way to gate Kids when they click on a link within a folio without having to have some sort of webview on every page as well.
Similar Messages
-
Ios 7 kids apps parental gate/permission
Hello!
I'm developing an app for kids for ios and android.
After uploading to appStore, my app was reviewed and i recieved the following message:
Apps primarily intended for use by kids under 13 must get parental permission
or use a parental gate before allowing the user to link out of the app or engage in commerce
How can i add this parental gate to my app?
I saw some examples online (very few) for other developing languages, of a pop-up with a password, but nothing came up for air.
thanks!We have used a couple of techniques. One is to put up a set of numbers and ask the user to type a sequence of four numbers, which we show as words (the keys are just the numbers). That has been approved in a few apps.
The other technique we used hasn’t been submitted to the app store yet, I don’t think, shows a “parents” button that you have to drag into a corner as indicated by some text that briefly appears when you touch the button.
So, a parental gate can be anything you like, it just has to present a question that is hard to guess what the answer is, you need to be able to read and understand some instructions, and the hope is that very young kids won’t guess what to do. -
Hey,
I configured Sun Directory Server 6.3.1 on Solaris Sparc. I'm not able to bind the ldapclient.
**DPS Error log says:**
17/Sep/2009:07:36:08 +0000] - BACKEND - WARN - No data source available for ADD,BIND,COMPARE,DELETE,MODIFY, in data source pool cn=my pool,cn=datasource pools,cn=config .You may want to check whether the configuration of this pool contains at least one data source enabled and with non-zero weights.
[17/Sep/2009:07:36:08 +0000] - BACKEND - WARN - Can't retrieve LDAP schema (LDAP error code: 32) No data view were found to process the search request.
[17/Sep/2009:07:36:08 +0000] - STARTUP - INFO - Sun-Java(tm)-System-Directory-Proxy-Server/6.3 B2008.0311.0334 started on host server-ldap in directory /opt/ldap/master/att-dps1
[17/Sep/2009:07:36:08 +0000] - STARTUP - INFO - Listening for secure client connections on 0.0.0.0:5392
[17/Sep/2009:07:36:08 +0000] - STARTUP - INFO - Listening for client connections on 0.0.0.0:5391
[17/Sep/2009:07:36:37 +0000] - BACKEND - WARN - LDAP server server-ldap:3998/ is up and running.
[17/Sep/2009:07:36:37 +0000] - BACKEND - WARN - Attempt to bind as dc=my-domain,dc=com to backend server server-ldap:5389/ failed. Silent BIND failed : err=48, error message "",
[17/Sep/2009:07:36:37 +0000] - BACKEND - ERROR - Failed to create a connection to mdtnj001ldap:5389/
[17/Sep/2009:07:36:37 +0000] - BACKEND - WARN - LDAP server mdtnj001ldap:5389/ is up and running.
[17/Sep/2009:11:39:53 +0000] - BACKEND - WARN - No servers available to process BIND in data source pool cn=defaultdatasourcepool,cn=datasource pools,cn=config
DPS Acces logs says:*_
[17/Sep/2009:08:56:45 +0000] - SERVER_OP - INFO - conn=67 op=1 BIND RESPONSE err=0 msg="" s_conn=dscc_ldap_mdtnj001ldap:3998:32
[17/Sep/2009:08:56:45 +0000] - PROFILE - INFO - conn=67 assigned to connection handler cn=directory services administrators,cn=connection handlers,cn=config
[17/Sep/2009:08:56:45 +0000] - OPERATION - INFO - conn=67 op=1 BIND RESPONSE err=0 msg="" etime=0
[17/Sep/2009:08:56:45 +0000] - OPERATION - INFO - conn=67 op=2 UNBIND
[17/Sep/2009:08:56:45 +0000] - DISCONNECT - INFO - conn=67 reason="unbind"
[17/Sep/2009:08:56:45 +0000] - CONNECT - INFO - conn=68 client=135.25.219.143:28428 server=mdtnj001ldap:5391 protocol=LDAP
[17/Sep/2009:08:56:45 +0000] - PROFILE - INFO - conn=68 assigned to connection handler cn=default connection handler, cn=connection handlers, cn=config
[17/Sep/2009:08:56:45 +0000] - OPERATION - INFO - conn=68 op=0 EXTENDED oid="1.3.6.1.4.1.1466.20037"
[17/Sep/2009:08:56:45 +0000] - OPERATION - INFO - conn=68 op=0 EXTENDED RESPONSE err=0 msg="" etime=0
[17/Sep/2009:08:56:45 +0000] - OPERATION - INFO - conn=68 op=1 BIND dn="cn=admin,cn=administrators,cn=dscc" method="SIMPLE" version=3
[17/Sep/2009:08:56:45 +0000] - SERVER_OP - INFO - conn=68 op=1 BIND dn="cn=admin,cn=Administrators,cn=dscc" method="SIMPLE"" version=3 s_msgid=4 s_conn=dscc_ldap_mdtnj001ldap:3998:33
*DS Error logs says:*
[15/Sep/2009:09:35:59 +0000] - Sun-Java(tm)-System-Directory/6.3 B2008.0311.0058 (64-bit) starting up
[15/Sep/2009:09:36:00 +0000] - Listening on all interfaces port 5389 for LDAP requests
[15/Sep/2009:09:36:00 +0000] - Listening on all interfaces port 5390 for LDAPS requests
[15/Sep/2009:09:36:00 +0000] - slapd started.
[15/Sep/2009:09:36:00 +0000] - INFO: 161 entries in the directory database.
[15/Sep/2009:09:36:00 +0000] - INFO: add:0, modify:0, modrdn:0, search:1, delete:0, compare:0, bind:0 since startup.
[16/Sep/2009:09:36:00 +0000] - INFO: 161 entries in the directory database.
[16/Sep/2009:09:36:00 +0000] - INFO: add:0, modify:2, modrdn:0, search:7348, delete:0, compare:0, bind:4 since startup.
**DS Access logs says:**
[17/Sep/2009:09:06:52 +0000] conn=630 op=44 msgId=45 - SRCH base="" scope=0 filter="(objectClass=1.1)" attrs=ALL
[17/Sep/2009:09:06:52 +0000] conn=630 op=44 msgId=45 - RESULT err=0 tag=101 nentries=0 etime=0
[17/Sep/2009:09:07:22 +0000] conn=637 op=180 msgId=1 - SRCH base="" scope=0 filter="(|(objectClass=*)(objectClass=ldapSubEntry))" attrs="1.1"
[17/Sep/2009:09:07:22 +0000] conn=637 op=180 msgId=1 - RESULT err=0 tag=101 nentries=1 etime=0
**On Ldap Client which is also Sun Sparc Box:**
bash-3.00# ldapclient list
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=my-doamin,dc=com
NS_LDAP_BINDPASSWD= {NS1}25c94587c053424f
NS_LDAP_SERVERS= Y.Y.Y.Y:5389
NS_LDAP_SEARCH_BASEDN= dc=my-domain,dc=com
NS_LDAP_AUTH= simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_CACHETTL= 0
NS_LDAP_CREDENTIAL_LEVEL= proxy
bash-3.00# ldaplist -v
+++ database=NULL
+++ filter=objectclass=*
+++ template for merging SSD filter=%s
ldaplist: Object not found (Session error no available conn.
I'm able to run successfully ldapsearch -p 5389 -h Y.Y.Y.Y -D "cn=Directory Manager" -b 'ou=People,dc=my-domain,dc=com' objectclass=* from client box [ When I'm using port 5389 where DS service is running on]
BUT
Getting Error when searching using port 5391 [Where DPS is running on ]
bash-3.00# ldapsearch -p 5391 -h Y.Y.Y.Y -D "cn=Directory Manager" -b 'ou=People,dc=my-doamin,dc=com' objectclass=*
Enter bind password:
ldap_simple_bind: Operations error
ldap_simple_bind: additional info: Unable to retrieve a backend BIND connection
bash-3.00#
bash-3.00# tail -f /var/ldap/cachemgr.log
Tue Sep 15 09:06:38.0240 Starting ldap_cachemgr, logfile /var/ldap/cachemgr.log
Tue Sep 15 09:06:38.0460 sig_ok_to_exit(): parent exiting...
Tue Sep 15 09:31:25.3718 Starting ldap_cachemgr, logfile /var/ldap/cachemgr.log
Tue Sep 15 09:31:25.3977 sig_ok_to_exit(): parent exiting...
bash-3.00# tail -f /var/adm/messages
Sep 17 03:44:41 mdtnj001wbs last message repeated 11 times
Sep 17 03:44:41 mdtnj001wbs last message repeated 11 times
Sep 17 03:48:31 mdtnj001wbs ldaplist[6828]: [ID 293258 user.error] libsldap: Status: 32 Mesg: openConnection: simple bind failed - No such object
Sep 17 03:48:31 mdtnj001wbs ldaplist[6828]: [ID 293258 user.error] libsldap: Status: 32 Mesg: openConnection: simple bind failed - No such object
Could you please help me out. Whats wrong configuration I made .. OR Did I forget to add....
Thanks
SanjayAdding Few more Info for the same:
I create My View/My Pool
bash-3.00# /opt/ldap/master/dps6/bin/dpconf get-ldap-data-view-prop -h server-ldap -p 5391 -v My\ View
alternate-search-base-dn : ""
alternate-search-base-dn : dc=com
attr-name-mappings : none
base-dn : dc=my-doamin,dc=com
contains-shared-entries : false
custom-distribution-algorithm : none
description : -
distribution-algorithm : none
dn-join-rule : none
dn-mapping-attrs : none
dn-mapping-source-base-dn : none
excluded-subtrees : -
filter-join-rule : none
is-enabled : true
is-read-only : false
is-routable : true
ldap-data-source-pool : My Pool
lexicographic-attrs : all
lexicographic-lower-bound : none
lexicographic-upper-bound : none
non-viewable-attr : none
non-writable-attr : none
numeric-attrs : all
numeric-default-data-view : false
numeric-lower-bound : none
numeric-upper-bound : none
pattern-matching-base-object-search-filter : all
pattern-matching-dn-regular-expression : all
pattern-matching-one-level-search-filter : all
pattern-matching-subtree-search-filter : all
process-bind : -
replication-role : master
viewable-attr : all except non-viewable-attr
writable-attr : all except non-writable-attr
The "get-ldap-data-view-prop" operation succeeded on "server-ldap:5391".
bash-3.00# /opt/ldap/master/dps6/bin/dpconf list-attached-ldap-data-sources -h server-ldap -p 5391 -v My\ Pool
SRC_NAME add-weight bind-weight compare-weight delete-weight modify-dn-weight modify-weight search-weight
My DS disabled disabled disabled disabled disabled disabled 100
The "list-attached-ldap-data-sources" operation succeeded on "server-ldap:5391".
bash-3.00# /opt/ldap/master/dps6/bin/dpconf list-ldap-data-sources -v -h server-ldap -p 5391
SRC_NAME is-enabled ldap-address ldap-port ldaps-port description
My DS true server-ldap 5389 ldaps
dscc_ldap_server-ldap:3998 true server-ldap 3998 ldaps dscc administration server
The "list-ldap-data-sources" operation succeeded on "mdtnj001ldap:5391".
If you need more info .. please let me know....
Thanks
Sanjay -
Very urgent- find parent-child relationship for wbs element
Hi,
There is a certain parent child heirachy in WBS elements.My requiremnet is to delete WBS element depending on certain field , say depending on some ""status"".If the status is active in some or any of the child then I am not suppose to delete its respective parent too. This parent-child relation can have say 5 levels.
For this I require a logic /program which shall maintain the parent reference for that particular child whih I want/ dont want to delete.
I am maintaining bottom- to -top approach.
That is I shall be checking for the status of the lowest level of WBS and then going to the highest.
Please Help!
Kshitijahi you can use following code....
REPORT zpmgmt_rpt_projinfo NO STANDARD PAGE HEADING LINE-SIZE 160.
*& Includes
INCLUDE <icon>.
INCLUDE zdata_declare_n. " include for data declaration
INCLUDE zsubr_n. " include for both subroutines
DATA: gv_index LIKE sy-tabix,
lv_index LIKE sy-tabix,
date_index TYPE sy-tabix.
*& Start of Selection ( Get Data )
START-OF-SELECTION.
For initial display cnt is set to X
IF cnt EQ 'X'.
PERFORM getdata.
CLEAR it_final.
PERFORM hierarchy.
cnt = ''.
ENDIF.
*& Form GETDATA
Fetches the data and logic for T1 and T2
--> p1 text
<-- p2 text
FORM getdata.
Getting project header data
SELECT * FROM proj
INTO CORRESPONDING FIELDS OF TABLE it_proj
WHERE pspid IN so_posid
AND werks IN so_plant
AND stort IN so_loc
AND erdat IN so_date.
IF sy-subrc <> 0.
MESSAGE 'Enter the valid entry' TYPE 'I'.
STOP.
ENDIF.
LOOP AT it_proj.
PROJECT = it_proj-pspid.
Get project & WBS element details
BAPI used gives the output in some specific format
which is used for roll-up logic.
CALL FUNCTION 'BAPI_PROJECT_GETINFO'
EXPORTING
project_definition = project
with_activities = 'X'
IMPORTING
e_project_definition = e_project_definition
TABLES
e_wbs_hierarchie_table = e_wbs_hierarchie_table.
Appending all the projects in the e_wbs.
LOOP AT e_wbs_hierarchie_table.
MOVE-CORRESPONDING e_wbs_hierarchie_table TO e_wbs.
APPEND e_wbs.
CLEAR e_wbs.
ENDLOOP.
CLEAR PROJECT.
ENDLOOP.
SET COUNTRY 'US'.
i_repid = sy-repid.
Getting data into internal tables
Getting project WBS element
SELECT * FROM prps
INTO CORRESPONDING FIELDS OF TABLE it_prps
FOR ALL ENTRIES IN it_proj
WHERE psphi = it_proj-pspnr.
Getting project activities
SELECT * FROM afvc
INTO CORRESPONDING FIELDS OF TABLE it_afvc
FOR ALL ENTRIES IN it_prps
WHERE projn = it_prps-pspnr.
SORT it_afvc BY vornr.
Getting activities start & end dates from AFVV
SELECT * FROM afvv
INTO CORRESPONDING FIELDS OF TABLE it_afvv
FOR ALL ENTRIES IN it_afvc
WHERE aufpl = it_afvc-aufpl
AND aplzl = it_afvc-aplzl.
Getting plant name
SELECT * FROM t001w
INTO CORRESPONDING FIELDS OF TABLE it_t001w
FOR ALL ENTRIES IN it_proj
WHERE werks = it_proj-werks.
Logic for passing data to final internal table
Passing Project master data
READ TABLE it_proj INDEX 1.
IF sy-subrc EQ 0.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
input = it_proj-pspid
IMPORTING
output = it_proj-pspid.
it_final-posid = it_proj-pspid.
it_final-post1 = it_proj-post1.
APPEND it_final.
CLEAR it_final.
ENDIF.
Passing WBS element to the final internal table IT_FINAL
LOOP AT it_prps.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
input = it_prps-posid
IMPORTING
output = it_prps-posid.
CLEAR color.
Get WBS element status ans color(T2)from OBJNR
CALL FUNCTION 'ZGET_STATUS_N'
EXPORTING
objnr = it_prps-objnr
IMPORTING
color = color
TABLES
t_status = it_tj30t.
IF color = 'RED'.
it_final-t2 = '@0A@'.
ELSEIF color = 'YELLOW'.
it_final-t2 = '@09@'.
ELSEIF color = 'GREEN'.
it_final-t2 = '@08@'.
ENDIF.
SORT it_tj30t DESCENDING.
Getting User statuses of WBS element at component level.
READ TABLE it_tj30t INDEX 1.
IF sy-subrc EQ 0.
CONCATENATE it_tj30t-txt04 '' INTO it_final-txt04 SEPARATED BY space.
ENDIF.
READ TABLE it_tj30t INDEX 2.
IF sy-subrc EQ 0.
CONCATENATE it_tj30t-txt04 it_final-txt04 INTO it_final-txt04 SEPARATED BY space.
ENDIF.
MOVE-CORRESPONDING it_prps TO it_final.
READ TABLE it_proj WITH KEY pspid = it_prps-posid.
IF sy-subrc EQ 0.
it_final-werks = it_proj-werks.
ENDIF.
APPEND it_final.
CLEAR it_final-txt04.
Passing activity to the final internal table IT_FINAL
LOOP AT it_afvc WHERE projn EQ it_prps-pspnr.
CLEAR color.
Getting user status and color(T2) for Activity from OBJNR
CALL FUNCTION 'ZGET_STATUS_N'
EXPORTING
objnr = it_afvc-objnr
IMPORTING
color = color
TABLES
t_status = it_tj30t.
IF color = 'RED'.
it_final-t2 = '@0A@'.
ELSEIF color = 'YELLOW'.
it_final-t2 = '@09@'.
ELSEIF color = 'GREEN'.
it_final-t2 = '@08@'.
ENDIF.
CLEAR: it_final-fsavd,
it_final-fssad.
MOVE-CORRESPONDING it_afvc TO it_final.
Getting User statuses of WBS element at activity level.
SORT it_tj30t DESCENDING.
READ TABLE it_tj30t INDEX 1.
IF sy-subrc EQ 0.
CONCATENATE it_tj30t-txt04 '' INTO it_final-txt04 SEPARATED BY space.
ENDIF.
READ TABLE it_tj30t INDEX 2.
IF sy-subrc EQ 0.
CONCATENATE it_tj30t-txt04 it_final-txt04 INTO it_final-txt04 SEPARATED BY space.
ENDIF.
APPEND it_final.
lv_index = sy-tabix.
CLEAR it_final-txt04.
CLEAR it_final-ltxa1.
CLEAR it_tj30t.
REFRESH it_tj30t.
Start Date and End Date fetched from AFVV.
LOOP AT it_afvv WHERE aufpl EQ it_afvc-aufpl
AND aplzl EQ it_afvc-aplzl.
MOVE-CORRESPONDING it_afvv TO it_final.
MODIFY it_final INDEX lv_index TRANSPORTING fsavd fssad.
ENDLOOP.
CLEAR it_afvc.
CLEAR lv_index.
ENDLOOP.
ENDLOOP.
Logic for T1.
T1 is based on T2 and start date and end date of activities.
LOOP AT it_final WHERE stufe = 3
AND ltxa1 IS NOT INITIAL.
gv_index = sy-tabix.
PERFORM date_difference.
CASE it_final-t2.
WHEN '@0A@'. " If Red
IF sy-datum GT it_final-fssad.
it_final-t1 = '@0A@'.
ELSEIF sy-datum LE it_final-fssad AND
sy-datum GE it_final-fsavd.
IF gv_diff > 1.
PERFORM date_monitor.
ENDIF.
it_final-t1 = '@09@'.
ELSEIF
sy-datum LT it_final-fsavd.
it_final-t1 = '@08@'.
ENDIF.
WHEN '@09@'. " If Yellow
IF sy-datum GT it_final-fssad.
it_final-t1 = '@0A@'.
ELSEIF sy-datum LE it_final-fssad AND
sy-datum GE it_final-fsavd.
IF gv_diff > 1.
PERFORM date_monitor.
ENDIF.
it_final-t1 = '@09@'.
ELSEIF
sy-datum LT it_final-fsavd.
it_final-t1 = '@08@'.
ENDIF.
WHEN '@08@'. " If Green
it_final-t1 = '@08@'.
ENDCASE.
MODIFY it_final INDEX gv_index TRANSPORTING t1.
CLEAR gv_index.
ENDLOOP.
ENDFORM. " GETDATA
*& Form hierarchy
Displays the data in ALV hierarchical manner.
In coding 3 tables are used for roll-up functionality.
FORM hierarchy .
DATA: it_final1 LIKE it_final OCCURS 0 WITH HEADER LINE.
DATA: it_final2 LIKE it_final OCCURS 0 WITH HEADER LINE.
DATA: it_final3 LIKE it_final OCCURS 0 WITH HEADER LINE.
DATA: count TYPE i VALUE 1.
DATA: posid LIKE prps-posid.
DATA: change,
date_mask TYPE c LENGTH 10,
lv_index2 LIKE sy-tabix.
DATA: index TYPE sy-tabix.
DATA: up LIKE prps-posid.
Deleting duplicate entries from the it_final.*****************
DELETE ADJACENT DUPLICATES FROM it_final.
LOOP AT it_final WHERE stufe EQ 2.
IF posid NE it_final-posid.
posid = it_final-posid.
ELSE.
DELETE it_final INDEX sy-tabix.
ENDIF.
ENDLOOP.
CLEAR posid.
LOOP AT it_final WHERE stufe EQ 3
AND ltxa1 EQ space.
IF posid NE it_final-posid.
posid = it_final-posid.
ELSE.
DELETE it_final INDEX sy-tabix.
ENDIF.
ENDLOOP.
Updating a new intrnal table for roll up functionality. ********
it_final1[] = it_final[].
CLEAR: lv_index2.
LOOP AT it_final1 WHERE stufe = 3
AND ltxa1 IS NOT INITIAL.
READ TABLE it_final WITH KEY stufe = 3
posid = it_final1-posid
post1 = it_final1-post1.
clear change.
IF sy-subrc = 0.
lv_index = sy-tabix.
IF lv_index2 <> lv_index.
CLEAR: change.
lv_index2 = lv_index.
ENDIF.
IF it_final1-t1 = '@0A@'.
it_final-t1 = '@0A@' .
MODIFY it_final INDEX lv_index TRANSPORTING t1.
DELETE it_final1 WHERE posid = it_final-posid.
CONTINUE.
ENDIF.
IF it_final1-t1 = '@09@'.
it_final-t1 = '@09@'.
change = 'Y'.
MODIFY it_final INDEX lv_index TRANSPORTING t1.
CONTINUE.
ENDIF.
IF it_final1-t1 = '@08@'.
it_final-t1 = '@08@' .
IF change IS INITIAL.
MODIFY it_final INDEX lv_index TRANSPORTING t1.
ENDIF.
CONTINUE.
ENDIF.
ENDIF.
ENDLOOP.
it_final2[] = it_final[].
CLEAR: lv_index2.
LOOP AT it_final2 WHERE stufe = 3
AND ltxa1 IS INITIAL.
READ TABLE e_wbs WITH KEY wbs_element = it_final2-posid.
IF sy-subrc = 0.
READ TABLE it_final WITH KEY stufe = 2
posid = e_wbs-up.
IF sy-subrc = 0.
CHECK it_final-t1 <> '@0A@'.
lv_index = sy-tabix.
IF lv_index2 <> lv_index.
CLEAR: change.
lv_index2 = lv_index.
ENDIF.
IF it_final2-t1 = '@0A@'.
it_final-t1 = '@0A@' .
MODIFY it_final INDEX lv_index TRANSPORTING t1.
CONTINUE.
ENDIF.
IF it_final2-t1 = '@09@'.
it_final-t1 = '@09@'.
MODIFY it_final INDEX lv_index TRANSPORTING t1.
change = 'Y'.
CONTINUE.
ENDIF.
IF it_final2-t1 = '@08@'.
it_final-t1 = '@08@' .
IF change IS INITIAL.
MODIFY it_final INDEX lv_index TRANSPORTING t1.
ENDIF.
CONTINUE.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
it_final3[] = it_final[].
CLEAR: lv_index2.
CLEAR change.
LOOP AT it_final3 WHERE stufe = 2.
READ TABLE e_wbs WITH KEY wbs_element = it_final3-posid.
CHECK sy-subrc = 0.
READ TABLE it_final WITH KEY stufe = 1
posid = e_wbs-up.
IF sy-subrc = 0.
CHECK it_final-t1 <> '@0A@'.
lv_index = sy-tabix.
IF lv_index2 <> lv_index.
CLEAR: change.
lv_index2 = lv_index.
ENDIF.
IF it_final3-t1 = '@0A@'.
it_final-t1 = '@0A@' .
MODIFY it_final INDEX lv_index TRANSPORTING t1.
DELETE it_final3. " WHERE stufe = 2.
CONTINUE.
ENDIF.
IF it_final3-t1 = '@09@'.
it_final-t1 = '@09@'.
MODIFY it_final INDEX lv_index TRANSPORTING t1.
change = 'Y'.
CONTINUE.
ENDIF.
IF it_final3-t1 = '@08@'.
it_final-t1 = '@08@' .
IF change IS INITIAL.
MODIFY it_final INDEX lv_index TRANSPORTING t1.
ENDIF.
CONTINUE.
ENDIF.
ENDIF.
ENDLOOP.
Building hierarchy table ***************
LOOP AT it_final.
IF it_final-stufe = '0'.
node_tab-type = 'T'.
node_tab-name = 'Project'.
node_tab-tlevel = '01'.
node_tab-nlength = '8'.
node_tab-color = '4'.
node_tab-text = it_final-post1.
node_tab-tlength ='20'.
node_tab-tcolor = 5.
APPEND node_tab.
it_final_hsk-node = node_tab.
APPEND it_final_hsk. CLEAR it_final_hsk.
CLEAR node_tab.
ELSEIF it_final-stufe = '1'.
node_tab-type = 'P'.
node_tab-name = 'Project'.
node_tab-tlevel = '02'.
node_tab-nlength = '10'.
node_tab-color = '1'.
node_tab-kind2 = 'I'.
node_tab-text3+0(4) = it_final-t1.
node_tab-tlength3 = '5'.
node_tab-tcolor3 = 1.
node_tab-kind3 = ' '.
node_tab-text4 = it_final-posid.
node_tab-tlength4 ='20'.
node_tab-tcolor4 = 3.
Code added for plant name
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
input = it_final-posid
IMPORTING
output = it_final-posid.
READ TABLE it_proj WITH KEY pspid = it_final-posid.
CHECK sy-subrc = 0.
READ TABLE it_t001w WITH KEY werks = it_proj-werks.
CHECK sy-subrc = 0.
Code End.
node_tab-kind4 = ' '.
node_tab-text5 = it_t001w-name1. " Plant Name
node_tab-tlength5 ='25'.
node_tab-tcolor5 = 4.
node_tab-kind5 = ' '.
node_tab-text6 = it_proj-stort.
node_tab-tlength6 ='15'.
node_tab-tcolor6 = 4.
node_tab-kind6 = ' '.
node_tab-text7 = it_final-post1.
node_tab-tlength7 ='25'.
node_tab-tcolor7 = 4.
APPEND node_tab.
it_final_hsk-node = node_tab.
APPEND it_final_hsk. CLEAR it_final.
CLEAR node_tab.
ELSEIF it_final-stufe = '2'.
node_tab-type = 'P'.
node_tab-name = 'Gate Id'.
node_tab-tlevel = '03'.
node_tab-nlength = '10'.
node_tab-color = '1'.
node_tab-kind2 = 'I'.
node_tab-text3+0(4) = it_final-t1.
node_tab-tlength3 = '5'.
node_tab-tcolor3 = 1.
node_tab-kind3 = ' '.
node_tab-text4 = it_final-posid.
node_tab-tlength4 ='20'.
node_tab-tcolor4 = 3.
node_tab-kind4 = ' '.
node_tab-text5 = it_final-post1.
node_tab-tlength5 ='25'.
node_tab-tcolor5 = 4.
APPEND node_tab.
it_final_hsk-node = node_tab.
APPEND it_final_hsk.
CLEAR it_final.
CLEAR node_tab.
ELSEIF it_final-stufe = '3' AND it_final-ltxa1 EQ space.
node_tab-type = 'P'.
node_tab-name = 'Component'.
node_tab-tlevel = '04'.
node_tab-nlength = '11'.
node_tab-color = '1'.
node_tab-kind2 = 'I'.
node_tab-text3+0(4) = it_final-t1.
node_tab-tlength3 = '5'.
node_tab-tcolor3 = 1.
node_tab-kind3 = ' '.
node_tab-text4 = it_final-posid.
node_tab-tlength4 ='25'.
node_tab-tcolor4 = 3.
node_tab-kind4 = ' '.
node_tab-text5 = it_final-post1.
node_tab-tlength5 ='25'.
node_tab-tcolor5 = 4.
Code added for start date and end date for component level.
SELECT SINGLE pstrm petrf INTO (v_pstrm, v_petrf)
FROM prte WHERE posnr = it_final-pspnr.
it_final-fsavd = v_pstrm.
it_final-fssad = v_petrf.
MODIFY it_final INDEX sy-tabix.
WRITE it_final-fsavd TO date_mask MM/DD/YYYY.
node_tab-tpos1 = '0'.
node_tab-kind5 = ' '.
node_tab-text6 = date_mask.
node_tab-tlength6 ='10'.
node_tab-tcolor6 = 3.
CLEAR date_mask.
WRITE it_final-fssad TO date_mask MM/DD/YYYY.
node_tab-tpos1 = '0'.
node_tab-kind6 = ' '.
node_tab-text7 = date_mask.
node_tab-tlength7 ='10'.
node_tab-tcolor7 = 3.
CLEAR date_mask.
APPEND node_tab.
it_final_hsk-node = node_tab.
APPEND it_final_hsk.
CLEAR it_final_hsk.
CLEAR node_tab.
ELSEIF it_final-ltxa1 IS NOT INITIAL.
node_tab-type = 'P'.
node_tab-name = 'Element'.
node_tab-tlevel = '05'.
node_tab-nlength = '11'.
node_tab-color = '1'.
node_tab-kind = 'I'.
node_tab-text1+0(4) = it_final-t1.
node_tab-tlength1 = '5'.
node_tab-tcolor1 = 1.
node_tab-kind2 = 'I'.
node_tab-text3+0(4) = it_final-t2.
node_tab-tlength3 = '5'.
node_tab-tcolor3 = 1.
node_tab-kind3 = ' '.
node_tab-text4 = it_final-ltxa1.
node_tab-tlength4 ='45'.
node_tab-tcolor4 = 3.
node_tab-kind4 = ' '.
node_tab-text5 = it_final-txt04.
node_tab-tlength5 ='10'.
node_tab-tcolor5 = 3.
WRITE it_final-fsavd TO date_mask .
node_tab-kind5 = ' '.
node_tab-text6 = date_mask.
node_tab-tlength6 ='10'.
node_tab-tcolor6 = 3.
CLEAR date_mask.
WRITE it_final-fssad TO date_mask.
node_tab-tpos1 = '0'.
node_tab-kind6 = ' '.
node_tab-text7 = date_mask.
node_tab-tlength7 ='10'.
node_tab-tcolor7 = 3.
CLEAR date_mask.
APPEND node_tab.
it_final_hsk-node = node_tab.
APPEND it_final_hsk.
CLEAR it_final_hsk.
CLEAR node_tab.
ENDIF.
ENDLOOP.
CALL FUNCTION 'RS_TREE_CONSTRUCT'
TABLES
nodetab = it_final_hsk.
CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
EXPORTING
callback_program = i_repid
callback_user_command = 'USER_COMMAND'
callback_gui_status = 'ZLD_TREE_N'
screen_start_column = 0
use_control = 'L'.
ENDFORM. " hierarchy
*& Form MYGUI
text
-->EX_TAB text
FORM zld_tree_n.
SET PF-STATUS 'ZLD_TREE_N'.
ENDFORM. "zld_tree.
**& Form user_command
Code for REFRESH button
FORM user_command TABLES node STRUCTURE seucomm
USING ucomm CHANGING exit
list_refresh.
CASE ucomm.
WHEN 'REFR' .
CLEAR it_final.
REFRESH it_final_hsk.
REFRESH it_final.
PERFORM getdata.
CLEAR it_final.
PERFORM hierarchy.
WHEN 'BACK1'.
LEAVE TO TRANSACTION 'ZCN41_N'.
ENDCASE.
ENDFORM. "user_command
include.....
*& Include ZDATA_DECLARE
*& Tables used for the report
TABLES: proj, prps, aufk, afvc, jest, tj30t, afvv, prte.
*& Type Pools used
TYPE-POOLS: slis, icon, fibs, stree.
*& Class & Data defination
CLASS DEFINATION
CLASS cl_gui_resources DEFINITION LOAD.
DATA DECLARATION
DATA: g_lights_name TYPE lvc_cifnm VALUE 'LIGHT',
pspid LIKE proj-pspid,
l_pos TYPE i VALUE 1,
gs_layout TYPE slis_layout_alv,
color TYPE zcn41_color_n-color.
DATA : cnt VALUE 'X'.
DATA : i_repid TYPE sy-repid.
DATA : t_node TYPE snodetext.
DATA : node_tab LIKE t_node OCCURS 0 WITH HEADER LINE.
DATA : gv_diff TYPE p, stort LIKE proj-stort.
CONSTANTS: st_formname_top_of_page TYPE slis_formname
VALUE 'TOP_OF_PAGE-ALV'.
*& Internal Table Declarations
DATA it_proj TYPE STANDARD TABLE OF proj WITH HEADER LINE.
DATA it_prps TYPE STANDARD TABLE OF prps WITH HEADER LINE.
DATA it_afvc TYPE STANDARD TABLE OF afvc WITH HEADER LINE.
DATA it_tj30t TYPE STANDARD TABLE OF tj30t WITH HEADER LINE.
DATA it_afvv TYPE STANDARD TABLE OF afvv WITH HEADER LINE.
DATA it_jcds TYPE STANDARD TABLE OF jcds WITH HEADER LINE.
DATA it_t001w TYPE STANDARD TABLE OF t001w WITH HEADER LINE.
DATA: BEGIN OF it_final OCCURS 0,
stufe LIKE prps-stufe,
pspnr LIKE prps-pspnr,
t1 TYPE icon-id,
t2 TYPE icon-id,
node LIKE node_tab,
posid LIKE prps-posid,
post1 LIKE prps-post1,
ltxa1 LIKE afvc-ltxa1,
txt04(20),
objnr LIKE afvc-objnr,
vornr LIKE afvc-vornr,
aufpl LIKE afvc-aufpl,
aplzl LIKE afvc-aplzl,
fsavd LIKE afvv-fsavd, "Ear. Start date
fssad LIKE afvv-fssad, "Ear. finish date
werks LIKE t001w-name1, " added after update
stort LIKE proj-stort, " added after update
END OF it_final.
DATA: BEGIN OF it_hsk OCCURS 0,
t2 TYPE icon-id,
t1 TYPE icon-id,
posid LIKE prps-posid,
post1 LIKE prps-post1,
objnr LIKE afvc-objnr,
stufe LIKE prps-stufe,
END OF it_hsk.
DATA: BEGIN OF it_new OCCURS 0,
objnr LIKE afvc-objnr,
fsavd LIKE afvv-fsavd,
fssad LIKE afvv-fssad,
udate LIKE jcds-udate,
t2(10),
END OF it_new.
CLEAR : node_tab, node_tab[].
DATA : entval TYPE prps-posid.
DATA : ct_fieldcat TYPE slis_t_fieldcat_alv.
DATA : BEGIN OF it_final_hsk OCCURS 0,
node LIKE node_tab,
END OF it_final_hsk.
DATA : project LIKE bapipr-project_definition,
e_project_definition LIKE bapi_project_definition_ex.
DATA : e_wbs_hierarchie_table TYPE STANDARD TABLE OF bapi_wbs_hierarchie
WITH HEADER LINE.
DATA : e_wbs LIKE e_wbs_hierarchie_table OCCURS 0 WITH HEADER LINE.
DATA: v_pstrm LIKE prte-pstrm, v_petrf LIKE prte-petrf,
v_posnr LIKE prps-pspnr.
*& Selection Screen of the report
SELECTION-SCREEN BEGIN OF BLOCK pms WITH FRAME TITLE text-001.
SELECT-OPTIONS so_posid FOR proj-pspid OBLIGATORY.
SELECT-OPTIONS so_plant FOR proj-werks.
SELECT-OPTIONS so_loc FOR proj-stort.
SELECT-OPTIONS so_date FOR sy-datum.
SELECTION-SCREEN END OF BLOCK pms.
*AT SELECTION-SCREEN .
READ TABLE it_proj WITH KEY pspid = so_posid.
IF sy-subrc <> 0.
MESSAGE 'Project Name dose not exist' TYPE 'E.
ENDIF.
include..
*& Include ZSUBR
*& Form date_difference
text
--> p1 text
<-- p2 text
FORM date_difference .
CALL FUNCTION 'ZDATETIME_DIFFERENCE_N'
EXPORTING
date1 = it_final-fsavd
time1 = '000000'
date2 = it_final-fssad
time2 = '000000'
IMPORTING
datediff = gv_diff
EXCEPTIONS
INVALID_DATETIME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " date_difference
*& Form date_monitor
text
--> p1 text
<-- p2 text
T1 for more than 1 days activities
Subroutines result out the T1 on basis of 80% of activity ( Green )
or if 20 % reamined. ( Yellow )
FORM date_monitor .
DATA: date TYPE string,
temp_date TYPE string,
lv_date LIKE afvv-fsavd,
lv_date_final LIKE afvv-fsavd,
lv_days LIKE bseg-dtws1 VALUE 0.
CONSTANTS: con TYPE f VALUE '0.8'.
*lv_date = it_new-fsavd.
IF gv_diff EQ 2.
lv_days = 1.
CALL FUNCTION 'ZCALC_DATE_N'
EXPORTING
date = it_final-fsavd
days = lv_days
months = '00'
sign = '+'
years = '00'
IMPORTING
calc_date = lv_date_final.
IF sy-datum LE lv_date_final.
it_final-t1 = '@08@'.
ELSEIF sy-datum GT lv_date_final AND
sy-datum EQ it_final-fssad.
it_final-t1 = '@09@'.
ENDIF.
ELSEIF gv_diff > 2.
lv_days = con * gv_diff.
CALL FUNCTION 'ZCALC_DATE_N'
EXPORTING
date = lv_date
days = lv_days
months = '00'
sign = '+'
years = '00'
IMPORTING
calc_date = lv_date_final.
IF sy-datum LE lv_date_final.
it_final-t1 = '@08@'.
ELSEIF sy-datum GT lv_date_final AND
sy-datum EQ it_final-fssad.
it_final-t1 = '@09@'.
ENDIF.
ENDIF.
ENDFORM. " date_monitor
this code will give you exact out put as you required from bootom to top functinality....with status.... -
Golden Gate functionality during new deployments
Hi can anybody tell me what can be done during deployment activity is performed for Active-Active(bi-directional) Golden Gate configuration?
In our case during new deployments we fail-over complete traffic from once Data centre to another active data centre.
After traffic fail-over we perform deployment work on Database. Which might insert/add columns etc.....
Adding columns and inserting data on once database makes Golden Gate to replicate them to target database which is not desired for a running database.
Anybody suggest what can be done in such scenario?
Also if we try to ignore those tables, we have seen a situation where Golden Gate will fail saying parent keys not found.
Any suggestion on handling such situation will help me a lot.
Thanks in advance.Hello,
Maybe a late reply, but have you thought of creating an extract process specif to the deployment (active data center)?
You could use the extracted trails and pump them over to the other data center and run the trails/changes as a batch job.
I recently had a similar scenario, and create a specific extract(active center) and batch replicat(passive center). The parameter nodbcheckpoint tell Oracle GG that you are running a batch job.
Here is an example:
GGSCI> ADD REPLICAT LOADDRP, EXTTRAIL ./dirdat/tx nodbcheckpoint
GGSCI> EDIT PARAMS LOADDRP
REPLICAT LOADDRP
SETENV (NLS_LANG = "AMERICAN_AMERICA.WE8MSWIN1252")
EXTTRAIL ./dirdat/tx
HANDLECOLLISIONS
--END RUNTIME
USERID GGATE@MYDB01, PASSWORD *******
ASSUMETARGETDEFS
DISCARDFILE ./dirrpt/loadtemppassive.dsc, purge
STATOPTIONS RESETREPORTSTATS
DDL INCLUDE ALL
DDLERROR DEFAULT IGNORE RETRYOP MAXRETRIES 5
REPORT AT 00:01
REPORTROLLOVER AT 00:01
REPORTCOUNT EVERY 60 SECONDS, RATE
DDLOPTIONS REPORT
MAP I_S_L_2.*, TARGET I_S_L_2.*;
ETC......Hope this gets you on the right track.
Sincerely
Jan S. -
Sequence Error During Golden Gate Replication! Need Hints
Dear All,
I am replicating 2 databases one way, from production to standby using golden gate.
Both databases are 11gR2 and on Linux.
Replication runs smooth for couple of days and then ends up with this error:
ERROR OGG-01296 Error mapping from ETISLBILLING.PAR_TBLPARNODEIDENTI to ETISLBILLING.PAR_TBLPARNODEIDENTI.
Parent Ket Not Found ETISLBILLING.FK_PARTNERNODE_IDENT
Trigger : ETISLBILLING.TRG_PAR_TBLPARTNERNODE Sequence : SEQ_PAR_TblPartnerIdenti
ORA-20000: Sequence value cannot be changed.
Main error is that value of sequence that is executed during the after insert trigger, does not change and trigger raise error hence the replication process is stopped.
I am just worried that the same triggers and sequences are executed successfully on production database and standby database has is exactly the same as production.
Is there some special treatment for sequences?
Kindly share your experience and give tips to handle this situation
Regards, ImranHi,
Hope this helps
Jan S.
FROM MOS: OGG Replicat Encounters OGG-01396 OGG-00869 ORA-01400 on Primary Key Column [ID 1308824.1]
Cause
==================
from the replicat report, first this error occurs:
WARNING OGG-01396 A complete after image is not available
in <schema.table> at rba 123456 in file ./dirdat/yyy, while inserting
a row into <schema.table> due to missing target row for a key update operation.
NOCOMPRESSUPDATES or FETCHOPTIONS FETCHPKUPDATECOLS may be specified in the
EXTRACT parameter file to include a complete image for key update operations.
The offending record is a primary key update, ... probably the key
<to be found at the mentioned rba 123456 in file ./dirdat/yyy> is not available on target
if the PK is not available at target side, then this error is expected, because HANDLECOLLISIONS turns the PK update into an insert as result of no target record to update.
The problem is that the source PK update record doesn't contain all the after image columns. That is also expected because the update record is intended to only update the affected columns.
As a workaround use FETCHOPTIONS FETCHPKUPDATECOLS on the capture/extract side to get all the after images of the record so that when a HANDLECOLLISIONS logic kicks in, it will be
able to successfully convert the original PK update into insert with all the after image present.
Solution
==================
First check the affected trail file yyy at RBA 123456 with logdump to verify, if the PK update does not have the complete key information as described.
If that is the case and the target table does not have the corresponding PK entry, this issue is hit. Otherwise it is something different.
As a workaround use
==================
FETCHOPTIONS FETCHPKUPDATECOLS on the capture/extract side to get all the after images of
the record so that when a HANDLECOLLISIONS logic kicks in, it will be
able to successfully convert the original PK update into insert with all the after image present. -
Sequence Error During Golden Gate Replication!
Dear All,
I am replicating 2 databases one way, from production to standby using golden gate.
Both databases are 11gR2 and on Linux.
Replication runs smooth for couple of days and then ends up with this error:
ERROR OGG-01296 Error mapping from ETISLBILLING.PAR_TBLPARNODEIDENTI to ETISLBILLING.PAR_TBLPARNODEIDENTI.
Parent Ket Not Found ETISLBILLING.FK_PARTNERNODE_IDENT
Trigger : ETISLBILLING.TRG_PAR_TBLPARTNERNODE Sequence : SEQ_PAR_TblPartnerIdenti
ORA-20000: Sequence value cannot be changed.
Main error is that value of sequence that is executed during the after insert trigger, does not change and trigger raise error hence the replication process is stopped.
I am just worried that the same triggers and sequences are executed successfully on production database and standby database has is exactly the same as production.
Is there some special treatment for sequences?
Kindly help on this.
Regards, ImranPl do not post duplicates - Sequence Error During Golden Gate Replication! Need Hints
-
E4200 Parental controls: What does Cisco define as a "School Night"
I loved my WRT610N, but unfortunately a firmware "upgrade" killed its ability to limit device access to certain hours, so I had to buy a new router.
My brand new E4200 stumbled out of the gate when the Mac app on the setup CD declared it cannot be read by my operating system, OS X 10.7.1 (Lion). I had to laugh, but I prefer to do things through the web interface anyway.
Whether or not I hang on to this router or return it will mostly depend on if I can get it to block access to the Internet for certain devices at certain times of the day.
The parental control interface surprisingly shoddy -- in fact it looks as if it isn't quite done -- but if it will do the job, it will be nice to be able to turn off internet access on a device by device basis once again.
Here's my question though:
Does anyone know how Cisco's E4200 router defines "Weekends" and "School nights?"
A simplistic (and incorrect) definition of a weekend for a router would be: Saturday and Sunday.
That would be incorrect because Friday, a "School Day" is a night where you would want later access, and Sunday, a "Non-school day" is when you would want access to shut off earlier because they need to get up for school on Monday morning.
Of course Sunday night I'll learn what time devices are barred, but I don't want to have to wait until the following Friday to learn whether or not they got Fridays right. There is a limited window where I can return the router and I don't want to push against it.So are you saying that the time schedule defines weekends as Saturday & Sunday instead of Friday and Saturday?
The trouble with the Internet Access Policy is that each of groups only allow for 10 devices. Each of my kids has a desktop computer and an iPod touch, and the older kids also have laptops and iPads. Oh, and we have 7 kids. Add to that the family gaming systems that access the Internet, and you can see the problem with a 10 device limit.
It takes 4 groups just to enter all the kids' gadgets, and unlike the "Parental Controls" list, which displays both Mac addresses and computer names of all devices on the wireless network for me to choose from, the "Internet Access Policy" only gives 10 boxes for entering Mac Addresses, something I have to go out and get then carefully enter. And annoyingly, the boxes aren't even long enough to display a full MAC address once you have entered it, so you have to click in it and scroll with cursor keys to find typos.
In short, it's not that the Internet Access Policy is "more complicated," it's that it is tedious and limited.
This is why I am hoping the Parental Controls feature will be adequate.
Unfortunately, I can't find documentation that tells me what the router defines as a "Weekend." The help is certainly not helpful, in fact, it is kind of humourus ("To never block Internet access, select Never."). Brilliant.
On Sunday night, I'll be able to discover if the router considers Sunday night as a "School Night." If it does, then I have to wait for Friday to find out if that school day is considered by the router to be a "Weekend."
But I was hoping someone here knew already -- either from experience or from documentation somewhere.
By the way, I'm also a bit paranoid about using the "Internet Access Policy." That's what I was using on my former router, then I did a firmware upgrade and every MAC address entered in the IAP could not access the Internet anymore -- even during the times they should have been allowed. -
Open a Android DPS app from a Safari link
Hello:
Is it possible to open an Android DPS app from a Safari webpage using a hyperlink (href) ? In iOS I've found a solution but I'm not sure how to implement it on Android
Saludos,If it can be done with native code (iOS and android) then you could also write a native extension to launch an app. However, because mobile apps are installed in individual sandboxes apps probably have no way of telling the parent OS to list current apps or run a paticular app. This is just my opionion from what I have understood so far. I think you can create some sort of native extension and use the following methods below.
Have a look here:
http://developer.android.com/reference/android/content/Intent.html
As for iOS you would need to use App urls which would be application specific.
http://iphonedevelopertips.com/cocoa/launching-your-own-application-via-a-custom-url-schem e.html -
Hey everyone,
I have a question concerning the following item:
I'm currently working on a file and there's need for an accordeon menu.
Of course the accordeon menu is (built with) HTML. I'm no hero at HTML so there's another party that will develop the menu.
But I have to integrate the HTML menu into the indesign file like Rufus explains here:
http://tv.adobe.com/watch/muse-feature-tour/muse-creating-content-for-dps/
Each item of the menu will contain sveral buttons that eventuall should link to a page within the final DPS file.
But here comes the trick question:
Like I said earlier we want to integrate the menu into the DPS file. So if you click on the menu it should direct you to another page in the final DPS file...
Is it possible to use the native "navto://" code in the HTML file? Just like regular buttons inside of indesign do?
We're pretty stuck here... and I can't contact some HTML wizard on here, beacuse they mostly don't understand how indesign works...
Thanks in advance!
kevinThis is the code:
<!DOCTYPE html >
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<title>Untitled Document</title>
<script src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.7.1.js"></script>
<style type="text/css">
/* first level */
div#accordion-nav {
width: 378px;
border: 1px solid #9C9C9C;
div#accordion-nav div div.header {
display: block;
margin: 0;
font-weight: bold;
background-color: #006a91;
height: 53px;
div#accordion-nav div div.header:hover {
cursor: pointer;
/* second level */
div#accordion-nav div ul {
list-style-type: none;
margin: 0;
height: 220px;
overflow-y: scroll;
overflow-x: hidden;
padding-left: 0;
div#accordion-nav div ul li {
padding: 0;
border-bottom: 1px solid #dfdfdf;
div#accordion-nav div ul li a {
text-decoration: none;
div#accordion-nav div ul li a img {
vertical-align: middle;
padding:0;
width: 378px;
height: 95px;
/* headers of lists */
div#volvo {
background: url("img/menu-headers/xxx.jpg") no-repeat;
div#terex {
background: url("img/menu-headers/xxx.jpg") no-repeat;
div#mafi {
background: url("img/menu-headers/xxx.jpg") no-repeat;
div#sennebogen {
background: url("img/menu-headers/xxx.jpg") no-repeat;
div#sandvik {
background: url("img/menu-headers/xxx.jpg") no-repeat;
div#diensten {
background: url("img/menu-headers/xxx.jpg") no-repeat;
/* Let's get this party started */
::-webkit-scrollbar {
width: 4px;
padding-right: 4px;
/* Handle */
::-webkit-scrollbar-thumb {
-webkit-border-radius: 3px;
border-radius: 3px;
background: #9C9C9C;
-webkit-box-shadow: inset 0 0 6px rgba(0,0,0,0.5);
::-webkit-scrollbar-thumb:window-inactive {
background: #9C9C9C;
</style>
<script type="text/javascript">
$(function () {
$("div#accordion-nav div div.header").click(function () {
$(this).parent().siblings().children("ul").slideUp(300);
$(this).siblings("ul").slideToggle(300);
</script>
</head>
<body>
<div id="accordion-nav">
<div>
<div class="header" id="xxx"></div>
<ul style="display: none;">
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
</ul>
</div>
<div>
<div class="header" id="xxx"></div>
<ul style="display: none;">
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
<li>
<a href="#">
<img src="img/xxx.jpg">
</a>
</li>
</ul>
</div>
<div>
and so on... -
DPS Enterprise License for Apple's B2B Store
Hey everyone,
we developed an app and successfully tested it on our iPads via DPS. We aim to distribute the app via the B2B store from Apple and the tutorial PDF from Adobe tells me that we need an "Enterprise license" for DPS.
Our company uses Adobe Creative Cloud and I am wondering now whether this already means that we have an "Enterprise license" for DPS, as well?
Cheers,
AlexNo. It does not.
-
How can a parent restrict a child's access to a PARENT'S PRE-EXSISTING iTunes account via iCloud's Family Sharing Program? To explain further... I have a young son who is on my iCloud family sharing program... I am excited to be able to share SOME of my music in my iTunes library, but there are some songs and music videos that are not age appropriate for him and currently there is no way to restrict him from viewing and downloading anything off of my iTunes library. Yes, I suppose I can delete the songs he shouldn't have access to, but I don't think I should have to do that... I paid for them and still like them and listen to them while I work out or am without my kids. Is there a way for me to personally select which songs/videos I would like to "hide" from my children in an effort to shield them from inappropriate content?
Hello ggg39,
Welcome to the Apple Support Communities!
I understand that you have some content in your iTunes library that you would like to restrict access for the child set up on Family Sharing with you. To do this, you can set restrictions on the child’s device as described in the attached article.
Family Sharing - Apple Support
Now kids under 13 can have their own Apple IDs. As a parent or legal guardian, the family organizer can create an Apple ID for a child and add the child to the family group automatically. Ask to Buy is turned on by default, and the organizer can also limit the content kids have access to on their devices through Restrictions on an iOS device or parental controls in OS X and iTunes.
For more information on restrictions and how to set them up, please reference the next attached article.
About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
Have a great day,
Joe -
We have multiple computers, laptops, iphones and ipad in our home. We have kept one account for iTunes in order to monitor what my family downloads for parental monitoring. How can I get approval or allow for more devices to be 'authorized' to purchase from iTunes? I don't want to have to have more than one account that I have to monitor - technology is overwhelming enough to control with all the hackers and distasteful things on the web.
Authorization applies ONLY to computers.
ipads/ipods/iphones/apple tvs are NOT authorized at all. -
Is there a way of making the Edge Commons parallax effect work smoothly with DPS on the iPad?
I want to create a feature for an iPad magazine utilising the parallax effect shown here...
Parallax Scrolling Made Easy (Adobe Edge Animate Online Week, Episode 9) - YouTube
I am using Digital Publishing Suite to publish to an iPad. I ran a test and the effect partially works, but not smoothly.
As you scroll down the animation does not play. Once you finish scrolling the animation then jumps to whichever point has been reached on the timeline, rather than animating as you scroll down the page.
Is there a way to get the same animation effect through DPS that you see in the browser? Or is it not compatible?
Thanks!As lllaass said, you can't.
If you want Apple to add backgrounds to the iPad version, leave them feedback: http://apple.com/feedback/ipad.html. -
My parents were too lazy and didnt know how to create their own itunes account. so I was wondering if either 1)there was a way to stop their music from geting on my laptop and phone,or 2) a way to transfer my perchases to a new itunes account. If anyone has any ideas besides burning everything to discs I'd love to hear it.
Hey there 79usma79!
I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
Thanks for using the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
I have not used my MacBook Pro for a few months and when I started it up did all the microsoft and system updates. Now it will not turn on and it goes to a grey page that state "You need to restart you computer. Hold down the Power button untilmitmt
-
Context menu problem in ADF 11g
Hi All, A context menu problem puzzle me. Following is the source, ======================================= <af:tree id="tree" value="#{treeTest.collectionModel}" var="node" contentDelivery="immediate" disclosedRowKeys="#{treeTest.treeDisclosedRowKeys
-
How do I create a shortcut to automatically load a specific page?
is it possible?
-
ORA-00205: error in identifying control file, check alert log for more inf
Hi All, I created my Database on a directory /mydir .The database is created and sucessufyully working then I mounted this directoy to a shared disk on the same /mydir.My database datafile where restored under /mydir .Now When I try to restart my dat
-
I am trying to download illustratorcc on the cloud but my wheel is just spinning
I am trying to download illustratorcc on the cloud but the wheel is just spinning.