Parenting - Is it possible to control internet access at certain times.

Is it possible to make an iphone not have access to the internet. I realize I can turn wifi and cellular data off but my child could obviously turn it back on. I want to only allow wifi and cellular data usage on weekends. Any suggestions?

Since you should be able to monitor his call usage and data usage, you could tell him/her, you can't make calls or go online except on weekends. If I find out that you disobey, I will take it away for 1 day the first time, 1 week the second time, and 1 month the third time. If there is a fourth time, it's gone for good.
Kids need boundaries and need to learn consequences. At least that's what I'd do.

Similar Messages

Software for controlling internet access with Airport Exreme

I'd like to find software that let's me control what pc's in the house have internet access at certain times. My iMac is my main computer, and I use Airport Extreme as my router.

You probably need to set the card up in OSX. Verizon should have a modem script that needs to be installed. (Hard Drive>Library>Modem Scripts). Then you need to set up the card from Network Preferences. Then it should work on both platforms.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Restrict wireless internet access on certain periods of time

Hello,
We need help on setting up a network with some restrictions for the attached clients.
We're quite new at setting up a network at this size.
Used devices:
1x SRP 540 router
1x SG 300-10P managed switch
4x AP 541N accesspoint
What we want to do:
1. Around 100 laptops and desktop computers need wireless internet access, but some of them on limited times during the day.
2. Not all wireless devices are allowed on using the wireless network.
3. There are also wired desktops that don't need restrictions.
4. We need the possibility to restrict most of the wireless devices to access certain websites or use certain applications on those computers to use internet access during the times that the computers are allowed to access the internet.
5. We want to restrict the clients for using torrents or other possibilities of downloading illegal content.
What we were able to do:
1. The accesspoints (AP 541N) are clustered to achieve 1 large wireless network.
2. Only mac-adresses that are listed in the accesspoints are capable of using the wireless network. Other mac-adresses are not allowed to use the accesspoints.
What we tried already:
1. adding the mac-adresses for the accesspoints to the list of "internet access policy" in the router. Internet access seemed still possible during periods the access wasn't supposed to be possible.
2. adding the mac-adresses from all clients in this internet access policy seemed useless. Only 10 Internet Access Policies seem to be possible to program. 8 mac-adresses per policy. Knowing there are (at least) two policies needed to restrict a group of 8 macs to access the internet in 24 hours (because blocking the internet from f.e. 22u in the evening to 6 in the morning is not possible because 6 is smaller than 22 - or 10PM).
Besides, after blocking internet access, we need also to write policies in blocking some websites or keywords.
Thanks already for your guidelines.
Wim

what about the thoughts of radius for authentication which is connected to active directory for your wireless users. Then have those people you must limit access too during the day in their own security group that's only allowed to login to the domain during certain times of the day.
To limit sites or what they can do on the Internet will require a separate solution for content/URL filtering. Then you can make policies and apply to your security groups in active directory block by category, keyword, and so on.
This is all great assuming you can get these clients into AD.
Just a quick thought, hope it helps.
_dschlicht
Sent from Cisco Technical Support iPad App

EA6100 AC1200 Blocking Guest internet access during specific times?

I see that you can disable guest internet access for specific times but only for specific devices. What I want to do is turn off Guest access for all devices during specific times.
I am using this in an environment where I will have different guests at different times with different devices and can't go in to block each one each time.

I think your only option at this time is to manually disable the Guest Wireless network when wanted.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Can anyone tell me how I keep everything I had in my old photoshop, now I've updated to Photoshop CC 2014. It did give me the option to transport over all my presets, but because I didn't have internet access at the time, it couldn't do it. Now I'm not

Can anyone tell me how I keep everything I had in my old photoshop, now I've updated to Photoshop CC 2014. It did give me the option to transport over all my presets, but because I didn't have internet access at the time, it couldn't do it. Now I'm not getting the option. Please help.

Migrating Presets does not require a network connection and you can still migrate your cc presets if you still have CC installed. Use Photoshop menu Edit>Presets>Migrate Presets... Migrating presets only migrates presets. It does not migrate Plugins, settings, extensions and scripts. CC 2014 is also not completely backwards compatible with CC. Support for Flash Panels and Oil Painter filter have been removed. So extensions like mini bridge no longer work in CC 2014

Possible to control/block access to the internet while using itunes,etc?

Parental control. I would like to require a password for access to Safari, etc, to control computer privileges - while keeping itunes, Pages, iphoto,etc open. I want to listen to my playlist without opening internet access to the kids. It must be possible!

Hi jarileys, and a warm welcome to the forums!
Did you set up Managed Accounts in System Preferences>Accounts for them?

Control Internet access using machines names

Hello to all, I have some machines (> 100) that are DHCP client and are on different subnets. I need that users that work on these machines don't access Internet. Is a there a way on TMG 2010 to create any
kind of control to accomplish this need?
Regards, EEOC.

Hi,
You can only control the traffic with IP addresses not computer names. A other way to limit internet access is to use users and groups in TMG firewall policy rules. The clients must be Webproxy or TMG clients
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Can I control Internet Access Centrally from the H...

Hi,
Is it posible to block access to certain categories of internet web sites directly from the hub using OPENDNS or any other method?
I can set access times using the bthomehub, but I would like to be able to check/limit the material they are able to access as well.
Can I apply this control centrally from the hub and not have to set up the control on individual machines in my home, as I would if I use the BT Netprotect.
My kids access the internet with ipads and phones and so a central solution from the hub would be ideal.
Thanks
Solved!
Go to Solution.

Hi geresy,
Welcome to the Forum and thanks for posting. This might help. Let me know if it does.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

No internet access on certain IP Address

Hiya , I have to revisit this problem.
Strange IP issue !!!
I have a windows 2003 server with a static IP.
My network has a DHCP server and that Particular IP is in the exclusion range.
When I open a browser on the server I get the error "internet explorer cannot display the webpage"
However if I change the static IP address to a defferent static Ip address everything works fine.
Here's the funny bit.
If I set a different PC/server to this troublesome static IP I also get the issue.
So the problem is with the Static IP address itself?
On the DHCP server there is no indication that this is a BAD IP ADDRESS etc..
Checkeded the firewall and this is not blocking either.
Any ideas why this particular IP fails to get me internet access ?
When uing this BAD IP I can access our internal intranet.. Which makes me think it's some form of DNS issue?
Any PC that I change to this Bad IP cannot access the web.
I have also checked to see if Antivirus has somehow blocked this but it hasn't.
I can't really see anywhere on the network that can control this behaviour ?
Ray..

Hiya and thx for reply..
All static settings are correct.I set them using GUI
When set static, If I change to any other static IP every thing works. Until I use 10.1.3.150
Details below.
IP with no internet access (IP Issue)
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 00-14-5E-BD-C2-0C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 10.1.3.150
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.2.254
   DNS Servers . . . . . . . . . . . : 10.1.3.145
                                       10.1.3.146
IP with internet access working (Normal IP)
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 00-14-5E-BD-C2-0C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 10.1.3.167
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.2.254
   DNS Servers . . . . . . . . . . . : 10.1.3.145
                                       10.1.3.146
DNS Server
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
   Physical Address. . . . . . . . . : 00-14-5E-BD-CB-20
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 10.1.3.145
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.2.254
   DNS Servers . . . . . . . . . . . : 10.1.3.145
   Primary WINS Server . . . . . . . : 10.1.3.145

Identify/expire Pages that have not been accessed for certain time

Hi,
I would like to create a publishing portal. Many users are able to create pages. I have the requirement that if a page does not get accessed for a certain time-period - it should be flagged for deletion and the creator should be notified by email.
Expiration policies depend on creation/modification date. Does this work for the last-accessed time (whereever I get this information from) aswell?
Sven

Use below powershell
$outputPath = Read-Host “Outputpath (e.g. C:\output\UnusedSites.txt)”
$lastDate=Read-Host “Last Accessed Date (in format mm/dd/yyyy)”
$gc = Start-SPAssignment
$site=$gc | get-spsite -Identity https://sitecollectionUrl
foreach($web in $site.AllWebs)
if ($web.LastItemModifiedDate -lt $lastDate)
Write-Host -f Red “Site is old…” + $Web.Title
Add-Content -Path $outputPath -Value “$($web.Title),$($web.ServerRelativeUrl),
$($web.LastItemModifiedDate),$($web.Author)”
else
Write-Host -f Green “Site: [" + $web.Title + "] Last Modified Date: ” + $web.LastItemModifiedDate
Stop-SPAssignment $gc
Or
plan to use this tool
http://www.harepoint.com/Products/HarePointAnalyticsForSharepoint/FindOutdatedContentInSharePoint.aspx

PS3/VITA Internet connection failed certain times ...

During certain times of the day (morning/afternoon) my ps3 and vita won't go online. I was able to get on fine at around 8pm last night but today neither of them will get an internet connection, they both get an IP fine and everything else connects fine (iPhone galaxy s4 Google nexus) I phoned customer support but they couldn't help me and pointed me towards tech experts but in all honesty I don't see why I should have to sign up with another premium service just to get my internet working how it should have worked from day 1.
I'm no expert in network administration but I know enough to know that it isn't my ps3 or vita with the problem, so I figure it must be some setting on the home hub 4 but ive tryed changing the settings multiple times and it makes no difference, but since I got it to work 3 days ago I've kept the settings the same, I just don't get why it will work then I goto sleep wake up the next day and its failing again?
Soif anyone could help me I'd be forever in your debt, I feel like I should have just stayed with talk talk as I never had a problem with them.

Is there some reason why you've not upgraded to 10.5.5?
That might be part of your problem at least.

Parental Controls - Internet Access Stopped!

My wife has a white MacBook running Leopard 10.5.8. It has worked fine for two years. Nothing was changed. She could not change anythign due to being logged into a managed account.
It could always access the internet over our home (or any available) WiFi perfectly. All of a sudden, yesterday afternoon, her managed account with "Parental Controls" enabled cannot access any internet. Safari mentions that it cannot access the server. When checking the network setting all seems fine, it can access the WiFi router.
The administrator account can access the internet over WiFi just fine.
I created another account called Test. In standard mode it can access the internet over WiFi just fine, but when i turn on "Parental Controls" Safari, or any other internet related program cannot access the internet. This includes the software update in the Finder.
What's going on? i have found similar issues on the Apple Support Communities going back unanswered to 2007!

Beach Dude,
I have the same problem, and have had on virtually every operating system since Parental Controls was introduced.
I have multiple kids with individual accounts. THe perplexing thing is that if I enable parental controls on my daughter's account, it works fine. I can set time limits, etc... and it works! But if I so much as turn on parental controls in my youngest son's account, every web browser is unable to connect to the internet at all from his account.
BUGGY software. And apple knows it is buggy, but it isn't core system stuff so they ignore the problem. I even tried setting up a new account for him and moving his old files over and resetting permissions. Still the same problem.
I've searched high and low for a solution and found none. I have found a limited number of users with the same complaint...and absolute silence from apple....
There is nothing on these boards that has worked, and I've tried several different solutions. Most responses are the useless kind, "change the setting in parental controls" kind of sophomoric advice from people who just assume what the problem is instead of reading our description of it.
Anyway, I haven't found a good alternate software solution for limiting the time and hours for children's accounts; but I did find an excellent tool for managing internet content access. It is called opendns and it is free and it works! Do a google search for "opennds" if your primary concern is managing access to web content. If you come up with a good solution for fixing parental controls so that it doesn't just cut off web access, please let me know here - or if you find an alternate software solution that allows an administrator to set time limits for standard accounts, I would like to know that too.
Regards

How to disable internet at a certain time for certain computers?? (kinda like a parental control)

We have a WRT54G and we all connect to the router wirelessly. The router has to be downstairs because our modem also has to be downstairs. We have digital phone so our phone has to be connected to the modem, which is why i cannot connect physically with an ethernet cable.
I have a little brother and a little sister and i have to control their internet because i see them awake in their rooms surfing the net. I see that i can disable "wireless internet connection" or create a policy disabling the internet at certain days and times at 192.168.blah.blah. But i just want to create a policy for my sister and brother's connection and not mine. I'm afraid if i create a policy, it may also disable my connection to.
Help please.
Thanks.

You will need the IP addresses and MAC address for the computers you want to block. You will find this information under DHCP table.
In Access Restrictions set a policy name and set status to enable. Input your computers info in Edit lists of PCs. Now set your days and times.
The system works between 12 am to 11:59 pm You can allow Internet from say 6 am to 11 pm but you cannot deny from 11 pm to 6 am.
If you have any problems download userguide for your router.
Greetings from Northern Ontario, Canada

How can I control internet access of clients

Hi all,
I don't know how I can limit or stop internet activities on client computers. We have windows XP and Mac computer in our network. We use domain. If you have any suggestion about this, please let me know. Thanks
Regards,
Quoc Phi
Ho Chi Minh - Vietnam
[email protected]

I've been wondering about this myself. I'm new to OSX server so I'm not all that familiar with the range of software and setups that are out there. This weekend however, I plan to take my Server and install another ethernet card in it. I'll proceed to hook one ethernet card into my DSL router and the built in card to the rest of the network.
I already have DNS set up in my server admin, but I'll additionally need to set up NAT and DHCP, i think this can be done through the 'Gateway Setup Assistant', but I think I know how to do it in server admin should that fail.
Once that's set up, users will access the internet directly through the gateway provided by the OSX Server. I'm not sure what kind of built in monitoring mechanisms are provided, but judging from the lack of detail I've found in my own research I'd say they're insufficient at best.
I'm looking to installing Viacoms "Intercept" software (http://www.vicomsoft.com/download/download.main.html) on the mac, it has a range of monitoring tools I think I'll need, also they offer a 2 week demo version for download. So it's worth a try
Hope this helps you save some time...

Parenting - Is it possible to control internet access at certain times.

Similar Messages

Maybe you are looking for