Parents iphone and my iphone activated with same email, now parents gets my text messages from freinds?
Hi my parents iphone(4s) and my iphone(5c) were activated with the same email now when I get a text message(imessage) from a friend they also receive the message my friend sent, so how would I turn this off on their phone; because I dont want them to read what my friend is sending me?
Hi cloudhalo,
Based on your description that both phones are receiving each other's messages, you may need to make sure that the phone numbers aren't both linked to the same Apple ID, and/or adjust which addresses the phones are set to send and receive messages from. You may find the information outlined in the following article helpful:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
Regards,
- Brenden
Similar Messages
-
Please help.
Follow the instructions here, http://support.apple.com/kb/TS5185 up to and including the last one if necessary which is to contact Apple Care.
-
Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this? I am using a PC and have version 4.3.4 on my iphone 4.
In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat -
when I get a text message from my brother or sister who have IPhones there is no text but there is a "download" button. If I tap the download button it beeps but there is no download. My galaxy note 4 uses verizon messages app. how do I get these text messages?
Picture messages without a texting plan are 25 cents each. Better than the $1.99 or $2.99 from the online store....
Attaching to an email would not work as mobile email does "do" attachments.
Sending to your online album will use text messages, I believe. Better to use a micro SD card, save to the card, and transfer them to your computer that way. -
I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE. NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT. "The project could not be prepared for publishing because an error occurred. (File already open with write permission)"! What is going on?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
I just upgraded to iPhone 5-- after checking voicemail I get a text message from 'unknown' with empty text bubble. How do I fix this?
I was one of the folks saing its on your email side but this explanation is a lot better and now I agree its obviously not your email thats the issue...
try this
1. Login to your Verizon account.
2. Click on “Account” at the top and then “Change Features” from the bottom right.
3. Select the device you would like to remove the service from.
4. Then scroll down until you find “Contact Management” and click “Remove -
how do i get message+ on my pc... my phone has crashed and i cant get my text messages from it.... please help
mandingo8005,
Look no further help is here! Let's get those text messages going on your computer. You need to download the desktop client http://www.verizonwireless.com/wcms/consumer/products/verizon-messages.html to your computer to use Message +. Were you already using Message + on your phone?
What phone do you have? You mentioned the phone crashed. What issues are you having with the phone?
JohnB_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
I recently downloaded ios7.1 to my ipad and my wife's cell phone # appeared on my ipad. It would not let us change it. Now I am getting her text messages and she is getting the apps I load on her iphone4S. We both have iphone 4S, but she has version 7.1 and I still have 6.0 because I didn't like the changes in v.7.0. We share an Apple ID and password which was not a problem before. My daughter says this is our problem, as she had her husband had this issue. She doesn't know how he fixed it. Has anyone else had this issue and can you tell us how to separate our Apple ID/passwords if this is, indeed, the problem?
If you share an Apple ID, both of your phone numbers should be linked to that ID. You should be able to use your phone number as well. My wife, my daughter and I all share an Apple ID for purchases, and we each text from our iOS devices using our own iPhone numbers.
When iOS 6 came out, you were able to link the phone number with your Apple ID to use for Messages and FaceTime. You will need to sign out of messages on all devices and then start the process all over again.
Take a look at this.
iOS and OS X: Link your phone number and Apple ID for use - Support -
is there anyway to get my text messages back onto my iphone 5 after plugging it into my windows computer?
Your title asks "How do I get my iPhone information back on my (iPhone)?
You also said "I have yet to back it up." Therefore, all your information that had been on your iPhone is now gone.
Your iPhone has (and will continue to) been refreshed from iTunes. -
HT201401 My iphone 4 is not ringing, or notifying me when i get a text message or email
My iphone4 is not ringing, or notifying me when I get a text message or email. It does however vibrate, the alarm works, and I am able to play music. The button to swith vibrate on and off, seems to not be working. Also, the sound buttons. The up button does not work, but the down button does. I have restarted, restored, and changed the ring. Nothing seems to be working. Has anyone had this problem? If so, how did you go about getting it fixed?
Did you accidentally move the slider button above the volume control to the "off" position (orange dot visible)? My husband used to do that all the time.
-
My iMessage is stuck on the wrong phone number and I keep getting coded text messages from SMS Info.
I recently switched the sim card in my iPhone when I moved from one country to another. When I put my local sim card in iMessage would not activate (just staying on 'waiting for activation' forever). This has not been a problem before. When I went to send/receive I saw the phone number there is still on the old one from the country I left. This is not the case in phone settings when I look for 'my phone number' or in facetime, which recognise the new number.
Plus I keep getting text messages from 'SMS Info'. They are just code, except that in there my new phone number is included among the code. The only other discernible characters are the letters 'REG-RESP?'. Perhaps this is something to do with an error in registering my new number.
I have tried-
1. Turning it off and on again.
2. Turning iMessage off and on again. This results in the usual 'it may cost you to reactivate with an SMS' popup on my phone screen, then a popup saying there has been a mistake, then one of these coded SMS messages.
3. Doing the above in combination with logging in and out of my apple id (as suggested on another forum post here)
4. Removing the new sim card and replacing the old one. Then turning off iMessage, replacing the new sim card and turning iMessage back on (of course powering the phone down and up)
None of these remedies have worked. The iMessage problem is affecting all sorts of my messages. Windows keep popping up saying that I may have to pay for an SMS to activate iMessage, except that it doesn't activate. The SMS messages from 'SMS Info' keep coming and I can't seem to get any of it to stop an just work normally.
I have looked in these forums already and can't see the same problem elsewhere. If someone could figure this out I would be most grateful.Hi,
When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
I would contact Apple Support and check with them. (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
I did find this iOS: Troubleshooting Messages - Apple Support
It starts off about sorting SMS that is not working.
This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
7:55 pm Tuesday; January 6, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
is there anyway i can retrieve recent text messages from the last 2 days and have them printed off after they have been deleted from my phone? this is seriously important i need this for an attourney!
click here:
Re: Can I request to get the content of old text messages -
Since my iPhone 4 updated I can no longer sync it or charge it with iTunes I get an error message ------>iTunes could not connect to this iPhone. An unknown error occurred (0xE000084)
From this support document http://support.apple.com/kb/TS3694 see this:
Unknown Error containing "0xE" when restoring
To resolve this issue, follow these steps. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. Learn about issues syncing iOS devices with P55 and related Intel Chipsets. -
Iclouds is supposed to work from my PC but doesn't. Loaded the program several times. I have all the corrected software. I keep getting the error message: ApplePhotoStreams.exe has stopped working. Anybody out there that uses icloud with a PC???
I've got the same problem and can't find a solution for this problem...
-
A friend and I text almost all the time. He used to receive all of my messages and one day, he text me, I responded and he didn't receive it. He still doesn't receive my texts but can receive other texts from everyone else. He sees me texts when he is on his computer through google voice but doesn't see my messages on his phone. How can we fix this issue?
Did he previously have an iPhone and now uses another type of phone?
If yes, he needs to read this:
iOS: Deactivating iMessage
http://support.apple.com/kb/TS5185?viewlocale=en_US&locale=en_US
Maybe you are looking for
-
Creating an Excel file from table with 40,000 records
I need help with creating an Excel file for client that has a table of 40,000 records. I have code that generates the Excel and has worked well in the past but with this much data it is timing out. I've already informed the client that Excel has limi
-
Problem with iTunes player window
Hello guys, my iTunes player window has suddenly become small. I cannot enlarge it when playing movies. Pls help
-
I have index.jsp at the root level. I this redirects to xrate.jsp at the following path: WEB-INF/views/jsp. At the same level is include.jsp and includeTop.jsp. My images are at WEB-INF/images. CSS files are at WEB-INF/styles. Here's thier jsp declar
-
I've used Photoshop Elements 2 for a few years and have recently upgraded to Photoshop Elements 4. I am sure I remember being able to view thumbnails of .psd files in Windows Explorer when I was using PSE2. However, now with PSE4, when I select thumb
-
BPEL 11g 1.1.6 -.7 XML document looses attribute names on enqueue
We are in the process of migrating BPEL processes from 10.1.2.3 to 11.1.1.6 We're using an AQ adapter to write inbound XML messages into an Oracle queue. Our developer has ran into an odd situation - When the message is written into the queue, the XM