ParforEach Mode in Block Step in BPM

Hi All,
We designed a BPM with a block step in Parforeach mode.
For this block step, a multiline container is the Input.It has all the messages to be processed in parallel. But during runtime this block step is not processed in parallel mode.The messages are processed one after the other in sequential mode.Only different instances of the block step are generated but they are processed sequentially.
Any suggestions!!!
Regards,
Srinivas.

Hello,
You could read here:
http://help.sap.com/saphelp_nw04s/helpdata/en/ce/bb2c421f3fda2ce10000000a1550b0/frameset.htm
that:
A ParForEach is not a means of improving performance. A ParForEach will not result in a split into threads.
Could this be the reason?
Regards
Patrick

Similar Messages

Error in Block step in BPM.

Hi all,
I am getting the error in block step, my design follows like this i defined one transformation before block step, the transformation step will splits the input bunch of records into equal no of record packets and sent to block step.. while defining block step i used foreach mode, in block step we kept one sync send step which will send message and gets response ....
but my block step is getting error once message enters into the block...
Thanks in advance for your valuable suggestions and solutions...
Srinivas

Hello...
>>the transformation step will splits the input bunch of records into equal no of record packets and sent to block step
The transformation splits the message into bunch.. Put the output in a multiline container and use this in the block step...
>>but my block step is getting error once message enters into the block...
What error are you getting??
>>Thanks in advance for your valuable suggestions and solutions...
Great to know that you are happy with the responses from the community member in this forum.. So I wish to point one more thing here.. Some of the recent threads closed by you were having closing comment as solved.. it will be better if you point out the problem and the solution which you have adopted to solve the same, so that other community member having the same problem will get a speedy solution... This is just a suggetsion from my end...
Thanks
Suraj

What is the use of block step in BPM? Please help!

Hi Experts,
I would like to know what is the use of block step in BPM? In what cases we can use it?
Can somebody explain BLOCK by relating to any programming language ( java) control step?
Please help!
Thanks
Gopal

Hi,
Block step is similar to what we use curly braces in most of the languages which defines the scope. For example if we are using loop step in bpm to loop through some variable then we can use block step to restrict the scope of loop step up to some point.
Thanks and Regards,
Sudheer.

ABAP proxy in Block step in BPM

Hi Experts,
Can ABAP server proxy be used in the block step of BPM?
Proxy cannot be generated using Abstract interfaces right?
Thanks
Suma S

Hi Suma,
Check the below links :-
As far as my knowledge, you cannot use ABAP proxies in the block step.However, you can cross check it.
Yes, you are right . You cannot create proxies from abstract interfaces.
Check the below links. These will help u in better understanding :-
http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
bpm send abap proxy problem
Re: what is a block step where it is used
What is the use of block step in BPM? Please help!
Regards,
Rohit

Block step in BPM

Hi Experts,
I am facing a problem in BPM,
1) Receive the Message
2) Split the Message
3) Block starts
    a) Synchronous send to RFC
    b)Response from this is send to Send step
In this scenario, the Message is going upto "BLOCK" step, and from there it is not geting executed correctly. To my surprise in SXMB_MONI, the message going to BPM succesfully and no other message found from BPM to any system(either synchronous send / send).
Can you please help me in identifying the problem.
Regards,
Anudeep

Hi,
Problem is solved.
Multi mapping is not giving target element. It is solved when we chnaged the input payload format, from,
<ns1:Sender_SI xmlns:ns1="namespace">
<rows>
     <field1>
     <field2>
</rows>
</ns1:Sender_SI>
to
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Sender_SI xmlns:ns1="namespace">
<rows>
     <field1>
     <field2>
</rows>
</ns0:Sender_SI>
By this change the Mapping worked and scenario is running succesfully.

BPM Scenario Block Step

Hi All,
In my scenario iam getting a message through RFC.Now i have to split the messsage into multiple messages and then send each message individually to a webservice and get the response.
I want to send them in Parallel mode by using Block step - Parforeach mode.
Following are the steps in my BPM.
1.Receive step - Open Syn/Async Bridge
2. Transformation step to split the message into multiple messages.
3.Opened a block in parforeach mode
4.Send step in synchronous mode
6.Collect the response in container.
7.Ouside the block close the ync/Async bridge.
When i exceute the scenario, i only see one message in SXMB_MONI which is from R3 system and even that message does not indicate what the problem is.The message recahed the BP engine.
Unable to figure out what the problem is.
Regards,
Srinivas.

But to use the response of all the sync messages, u must use the correlation
See this
http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
Regards,
Prateek

Purpose of having a block in the BPM

whats the purpose of having a block in the BPM, and what does its attributes
BLOCK-Start and BLOCK-end with values "new transaction"/"no new transaction" means

Hi
pls check
What is the use of block step in BPM? Please help!
Regards,
Ram

ParForEach mode in BPM

HI all
I want to send different messages to multiple receiversu2019 parllelly.
This I want to achieve by ParForEach mode in BPM.
I want to send message to related receiver system, like
Devmsg to Dev system
Qualitymsg to quality system
Prodmsg to Production system
Sometimes I have multiple clients for each system
How to design my BPM? Please suggest
I am using standard receiver determination in my design but it is not sending, how to design my block and send step.

Hi Chitra,
When you use asnychronous messaging and require responses, you'll need to configure correlation.
Of course, this is only possible in case there is some field that can be used to correlate sent and received messages...
I haven't tried this from within a ParForEach block, though...
Best regards,
Dennis

Issue in File to RFC to File Scenario with BPM using Block Step

Hi Everybody,
                       I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
                    After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth Kumar

Hi Rajesh,
                       After going through the blog, i saw the trace messages. It says
" The   exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar

BPM Block step

Hi everyone,
In my scenario IDOC XI JDBC scenario I am using the BPM.
My IDOC message type is Vendor master and needs to send to 4 Legacy systems.
My BPM steps are:
1)Receive step
2)Transformation step.
3)Fork step(4 branches).
Inside the fork
a)4 receiver determination steps.
b)4 Send steps.
My question is I need to monitor each and every step in BPM.
So how many BLOCK steps can I have for my scenario?
And in the BLOCK step properties can anyone explain me what is Multiline element,Current Line element and End Condition?
I have gone through the SAP BASIS BPM patterns in XI but it is very confusing for me.
If any one can help me out that would be great and I appreciate your help.
Thank you,
Mili

Hi Mili,
imagine you have to a message that has a unknown number of order items. But your receiver wants to have messages separated by order items.
Sample:
You send a order IDOC from R/3 to your XI. The XI does not know how many order items are in the IDOC. So you do a transformation step. In this case a so called multi-mappping. the multi mapping splits your IDOC into several Messages.
Imagine also that you BPM is generated coding! Now imagine a table (like in EXCEL) where these single messages (your order items) are. The multiline element is your excel.
Now you want to send the EXCEL rows (=order items) step by step.
So your send step has to take the actual message that should be processed.
This is the SINGLE LINE.
Take care: MULTILINE Container element and SINGLE Line Container element have to refer to the same message interface!
But in your case you do not need a multi mapping as the number of receivers is known (=4).
Also you do not need a end condition.
You need only one send step!!!
In Integration directory configure a receiver determination where your 4 receivers are!
Also 4 interface determinations and 4 communication channels.
One question:
What do you mean by:
>>>My question is I need to monitor each and every step in BPM.
Thats all!
Regards mario

BPM error at BLock step name

hello experts,
i am working on BPM scenario,
in that i have few block steps..... one of block step, the step name is displaying the error.
saying that the step name is already exists.
but i have changed, then also it displaying the same error.
can any body help me in this regard??

Delete the block and recreate it. It will automatically assign it a unique name.
Regards,
Prateek

Sync Send step in Block step...in BPM

Hi All is it possible to maintain a syncrounous send step in Block step, please let me know how....we can maintain for request message and response message.
Thanks
Srinivas

Hi ,
Its simple
Receiver- transformation -Block -
Sync step -
Container-----Block -
Final send
Exception -
Regards,
Jude

Sync Send step in BPM.

hi all,
My BPM flow starts with a single message that I split using a message map into a list of messages into a block which is foreach mode to be sent synchronously one by one splitted messages to an Oracle stored procedure via the JDBC adapter. After the mapping step, the flow goes into a ParForEach block that executes the sync Send step to the JDBC adapter, and then has a Container Action that collects the responses.
My problem is that BPM seems to not like executing a synchronous send from inside a block. The first execution of the send step will produce an error in the BPM flow.
thanks in advance.
srinivas.
Edited by: sri_rambo on Nov 27, 2009 8:06 AM

My problem is that BPM seems to not like executing a synchronous send from inside a block.
BPM does support SYNCSend step inside a Block....but not for ForEach/ ParForEach mode of execution.
I think you are following this procedure from quite a long time.....sync send inside a foreach block.
Regards,
Abhishek.

Block Step

Hi
through SAp help i'm trying to execute Block step in my scenrio..but its vey difficult for me at present..
with in the block i'm proecessing data from multiple receivers to transform one sender..
I need to catch all exceptions with in the block ..
so if you have any example kind of thing excuting this kind of scenrio..please let me know..
Thnaks In Advance..
Regards..rambarki

hi,
check out these threads:
==>question on BLOCK in BPM
==>BPM: Block Processing: ParForEach
==>BPM 'block' uses ...
==>Exception inside a block [BPM]
Hope This will be useful...:)
Regards,
Sundararamaprasad

Exception is not showing in transformation step in BPM after activating

Hi ,
I want to cancel the process if any mapping error occur in transformation step for that I designed by below steps.
1.Block step ( mentioned exeption)
2. transformation step ( Inside block mentioned block step exception)
3. exception branc inside block
4. contorl step (Cancel process inside exception branch)
after activating the BPM , in transformation step exception is not showing .
How to resolve this issue how
Please help me
Regards

2. transformation step ( Inside block mentioned block step exception)
Did you define the Exception Handler properly and also used the same in the Exception Branch? If you do a check in IR for your BPM (F7) do you get any error/ warning messages?
Regards,
Abhishek.

ParforEach Mode in Block Step in BPM

Similar Messages

Maybe you are looking for