Park option for T Code FBS1....

Hi Experts,
Is it possible to enable the Parking option for transactions run through FBS1 (accrual/deferral doc).
If Yes, Kindly inform the steps involved.
Useful answers will be adequately rewarded.
Thanks,
SK

Hi all. You can perform the following:
1.     Add two columns in the upload file template
                             Reversal reason + reversal date
2.     Reversal reason is populated as follows
                               Reveresal reason -> documentheader-reason_rev in BAPI_ACC_DOCUMENT_POST
3.     Reversal date is updated using a separate function module
                                 This must be updated in table TSTOR by using function TSTOR_INSERT.
The FBSI is then successfull and can also be reversed with F.81.
CHAN TAN HUA

Similar Messages

Park Documents for T.codes F-28, F-44, and F-54

Hello guru....!
Here at one of My client requirement is parking documents while using T.codes F-28, F-44, and F-54. Is it possible to park documents while doing any transactions using through above mention t.codes? also can we restrict through giving any user authorization to park documents.
can anyone please help me to come out of this requirement.
Regards
M.Sudhan

Hi,
Thanks for your replay,
But I have suggested to user use T.codes instead of F-02 use F-65, for FB50 use FV50, for FB60 use FV60, with removing the posting option in this codes through giving authorization.
Regards
M.Sudhan

Lumia shows invalid sim, no option for unlock code

okay. so i have searched a little for a solution and here is basically my problem.
i have bought a phone and when i put in my sim card it says no service. it shows the 5 bar with a "no entry" sign over it.
then occasionally it changes to a sim card with a no entry sign over it,
i dont think the sim is locked to a particular operator as it has no option to unlock it,
my only idea is that it has been locked by police..
thanks for any help

liamht wrote:
okay. so i have searched a little for a solution and here is basically my problem.
i have bought a phone and when i put in my sim card it says no service. it shows the 5 bar with a "no entry" sign over it.
then occasionally it changes to a sim card with a no entry sign over it,
i dont think the sim is locked to a particular operator as it has no option to unlock it,
my only idea is that it has been locked by police..
thanks for any help
u mean you don't think the fone is locked to a particular operator? ...anyway if the fone is locked, i dont think it would give you any 'unlock' option.. unless you bring it to a cellfone shop so they can unlock the fone (open line) to any network operator.
btw., you might also want to check another known good sim card. or it may be a loose contact in the fone's sim connectors. thats a new fone, isn't it? maybe u can claim warranty for that. didn't u 'test' it before buying?

Bapi for trans code FBS1 - is there any? - FI - Reversal Journal Entries

Hi Sap Forums,
I have to post Reversal Journal Entries, I am currently using BAPI_ACC_GL_POSTING_POST for regular entries.
Anyone else had to do this?
thanks

Found this... does this work for anyone?
I am also trying the same thing can you let me know what parameters you are passing to BAPI BAPI_ACC_GL_POSTING_REV_POST.
1. I am calling first the BAPI BAPI_ACC_GL_POSTING_POST to create FI Document.
2. I am passing the document number created from above step to the bapi BAPI_ACC_GL_POSTING_REV_POST .
3. Till second step it is fine giving no errors but when i do commit i get an update error, document number alreay exist.
Edited by: keith warnock on Jun 11, 2009 4:58 PM
Edited by: keith warnock on Jun 11, 2009 4:59 PM

Bapi for T-Code:fbs1

I want to creat documents by bapi:BAPI_ACC_DOCUMENT_POST.Sometime interface want to tell reversal date,but this FM has no this parameter(only reversal reason).
Thanks!

Hi all. You can perform the following:
1.     Add two columns in the upload file template
                             Reversal reason + reversal date
2.     Reversal reason is populated as follows
                               Reveresal reason -> documentheader-reason_rev in BAPI_ACC_DOCUMENT_POST
3.     Reversal date is updated using a separate function module
                                 This must be updated in table TSTOR by using function TSTOR_INSERT.
The FBSI is then successfull and can also be reversed with F.81.
CHAN TAN HUA

How to set field "vendor" as optional for movement type 221

Hello experts, I want to set the field "Vendor"(LIFNR) as optional for movement type 221 when create reservation using T-code MB21. As far as I know, field selection of reservations is determined by the settings in the field selection(from201) of the movement type. But even when I have set the field "Vendor" as "optional" both in field selection (from 201) and field selection (Enjoy) for mvt 221 using T-code OMJJ, it is still not shown on the screen of creating reservation. Is it the SAP inside logic that restrict this field for movement type 221 or should I change any other settings elsewhere?
Any help will be highly appreciated.
Best regards!

Let me understand ,
u want to reserve stock with MB21 with optional for vendor code or name .
then against the reservation u was t to issue to cost centre or production with 201 rt .
If so hopefully this scenario excludes the normal production order process ( cozz their GI is w.r.t prd order only since reservation is created at backend and also shown in prod order).
ur req is normally for consumables or spares etc and u want o track the vendor also in the Reservation .
possible check is Movement type - screen in omjj
GL account variant settings
MB1a setting
last option - create a screen variant with SHDO tode and activate it .
all will be at client level so please

MASS UPDATE FOR MATERIAL CODE DELETION

Dear all ,
Please provide the option for material code deletion in mass update .
Srithar K

Use T-code: MM17
Table-Fields:
MARA-LVORM (Client level)
MARC-LVORM (Plant level)
If its your first time, do a test run in sandbox.
Added
The above will flag the deletion flag. Then you will have to do a archival. To know the steps, just do a search in this forum or MM forum, you will get a step by step procedure.

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

WORK FLOW OBJECT FOR T CODE FI:- FB50 WHILE PARKING A DOCUMENT

HI
PLS SUGGEST ME WORK FLOW OBJECT NAME FOR TRANSACTION CODE FB50 WHILE PARKING THE DOCUMENT.
THANKS AND REGARDS
VINAY BHASKAR
Moderator message: please do more research before asking, do not post in all upper case ("shouting").
Edited by: Thomas Zloch on Jun 17, 2011 12:59 PM

hi
Go to FS00
enter GL account no & Comp Code.
Click Change button
You might have to seek help of an FI consultant to do so.
Also in KA01 create this G/L account as a cost element against your controlling area assigned to your Chart of Accounts, you can do so by clicking on Extra's tab in transaction KA01
Regards

How to activate the option posting period for T.code F.2E

HI All,
When we execute T.code F.2E the selection parameters available are
1. company code
2. partner company code
3. open at key date
4. display currency.
As the program documentation says we can reconcilie by selecting option for posting period in F.2E
Below is the SAP documentation on the program.
You use the Posting period selection option to specify the time period in which the posting dates of the documents need to fall in order to be included by the program. Open items, cleared items, and payment documents are all selected. See the section Parameter Open for key date and Selection Option Posting period for further information. If you want to start the program with this date selection, the option must be selected accordingly.
But the field for posting period is not available in selection parmeter, we are on 4.7 EE version.
Please let me know how to activate the option for posting period in selection parameters for T.code F.2E
Thanks in advace.
Regards,
Raj.

Hi,
I have tried to execute the program FBICRC003_DATA_REC. But program doesn't exist.
We are on 4.7 version. I have executed program RFICRC00, but stil can't find the option posting period.
Please confrim.
Thanks
Regards,
Raj.
Edited by: Raj Racha on Dec 27, 2010 10:58 AM

TS4006 my iphone has gone into the lost mode and i have tried to reactivate it with itunes but its not working. itunes says i should insert the simcard pin code but there is no option for me to do that on the phone or itunes. please help........

please help my iphone 4s has gone into the lost mode and i cant re-activate it i dont know what to do. Itunes needs me to put the Simcard pin but i dont have any option for that.

Hello Buzzy78,
Try to put your iPhone in Recovery mode and then Restore it to Factory settings and see if you are able to get into your iPhone.
Recovery Mode : http://support.apple.com/kb/HT1808

Set maximum size in Text Form Field Options for a field in bi publisher RTF

Hi All,
How to set maximum size in Text Form Field Options for a field in bi publisher RTF.
I have a RTF whch is having a field in that i need to add some validation condition but after adding certain condition in Add help text tab ,it is not accepting after certain length, how i can increase the length to unlimited,please help me on this
Thnaks

Form fields have some restrictions if your are using version lower than 11g.
They can accommodate only 393 chars. You can add the text in both status bar and help key, which can in total consume 393 chars.
If your code logic is more than that, it can be split into multiple form fields as Avinash suggested or you can use sub template logic and handle coding over there. Again in sub template code can be within/outside form fields.
So there is no option for user to increase the size of form field.

Any suggestions for my code.

Hi,
I wrote this little piece of code to reduce some of the work I need to do when doing database access. I intend to use if with mySQL and mostly web based applications. It'll probably use it quite a bit, and since it's my first try at writing something like this I figured I'd post the code to see if anyone can find any problems. I've already tested it and it works, so I'm mostly interested in any feedback about performance issues.
I'd really like to know if there's any way I can get the number of rows in a result set before I start going through it. That way I could return the data in an Object[][] array (I'd assume it'd be a little faster to add values to than the ArrayList).
Here's the code...
* SQLGruntBean.java
* Created on November 22, 2002, 12:37 PM
package com.vacode.beans.sql;
import java.sql.*;
import java.util.*;
/** This bean is a generic class that can be used to access any type of SQL
* database. To use it with an application that accesses an SQL database
* do the following:
* 1. Create a new instance of SQLGruntBean.
* 2. Set the SQL connection source by calling setConnection(Connection).
* 3. Set the SQL query you wish to perform by calling setSqlQuery(String).
* Note: You may replace all values with question mark place holders
* as long as you also perform step 4.
* 4. (OPTIONAL) Set the values that are represented by question mark place
* holders by calling setSqlValues. This method requires an Object array as
* input.
* 5. (OPTIONAL) Set the maximum number of results to be retrieved by calling
* setMaxRows. If left unset it will default to 100. This method should not
* be used as a replacement for the LIMIT parameter in an SQL query. It is
* merely a backup in case an excessive number of results are returned
* erroneously.
* 6. Once all the necessary variables are set you may call either
* executeQuery or executeUpdate to perform the intended task.
* EXAMPLE
* 
* <code>
* SQLGruntBean sgb = new SQLGruntBean();
* Object[] values = new Object[1];
* ArrayList data = null;
* 
* sgb.setConnection(dataSource.getConnection);
* sgb.setSqlQuery("SELECT * FROM USERS WHERE firstName = ?");
* values[0] = "John";
* sgb.setSqlValues(values);
* data = sgb.executeQuery();
* </code>
* 
* The necessary try / catch blocks and error handling have been left out of
* this example, but will need to be implemented for production code.
* @author Vacode Web Systems
* @version 1.0
public class SQLGruntBean
 // Define global variables
 private Connection dbConnection = null;
 private String sqlQuery = null;
 private int maxRows = 100; // Default to 100 in case it is not set
 private Object[] sqlValues = null;
 // End global variables
 /** A write only method for defining the connection to an SQL
 * database
 public void setConnection(Connection sqlConnectionObject)
 this.dbConnection = sqlConnectionObject;
 /** A write only method for defining the SQL query that is to be
 * executed.*/
 public void setSqlQuery(String sqlQuery)
 this.sqlQuery = sqlQuery;
 /** Defines the maximum number of rows that are to be retrieved from the
 * result set. This is more of a back up than anything as the sql query
 * should contain a limit parameter if the query is going to return an
 * excessive number of results. */
 public void setMaxRows(int maximumRows)
 this.maxRows = maximumRows;
 /** A write only method for defining the dynamic values that are
 * to replace the question mark placeholders in the sql query.*/
 public void setSqlValues(Object[] values)
 this.sqlValues = values;
 /** Used to execute an sql query. The executed query is defined by calling
 * setSqlQuery prior to this method. The database connection to be used
 * is defined by calling setConnection prior to this method. */
 public ArrayList executeQuery() throws SQLException
 // Define the local variables that will be used within this method
 ArrayList data = null;
 // End local variables
 if(this.sqlValues!=null && this.sqlValues.length>0)
 /* A prepared statement needs to be executed because the
 * sqlQuery is going to contain ? placeholders rather than
 * actual values. It is necessary to replace these place
 * holders with their corresponding values.*/
 data = executePreparedQuery();
 else
 // A regular sql query needs to be executed.
 data = executeRegularQuery();
 return(data);
 /** Used to execute an sql update. The executed update is defined by calling
 * setSqlQuery prior to this method. The database connection to be used
 * is defined by calling setConnection prior to this method. */
 public int executeUpdate() throws SQLException
 // Define the local variables that will be used in this method
 int rowsAffected = -1;
 // Done local variables
 if(this.sqlValues!=null && this.sqlValues.length>0)
 /* A prepared update needs to be executed because the
 * sqlQuery is going to contain ? placeholders rather than
 * actual values. It is necessary to replace these place
 * holders with their corresponding values.*/
 rowsAffected = executePreparedUpdate();
 else
 // We just need to execute a regular sql query
 rowsAffected = executeRegularUpdate();
 return(rowsAffected);
 /** If a prepared statement is needed this method will be called by the
 * executeQuery method.*/
 private ArrayList executePreparedQuery() throws SQLException
 // Define the local variables that will be used within this method
 ResultSet rs = null;
 PreparedStatement pstmt = null;
 ArrayList data = null;
 // End local variables
 try
 pstmt = this.dbConnection.prepareStatement(this.sqlQuery);
 setSqlValues(pstmt, this.sqlValues);
 rs = pstmt.executeQuery();
 /* Closing the PreparedStatement is going to cause the
 * ResultSet to be inaccessible. Therefore it is necessary to
 * move the data that has just been aquired into an alternate
 * data storage object.*/
 data = processResult(rs);
 // Clean up all of the db resources we have opened
 rs.close();
 rs = null;
 pstmt.close();
 pstmt = null;
 this.dbConnection.close();
 this.dbConnection = null;
 /* No exceptions are caught. They should be dealt with by the
 * calling class. */
 finally
 /* If an exception was thrown during the execution of the
 * sql query there will still be open db resources. They need
 * to be closed. */
 if(rs!=null)
 try
 { rs.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 rs = null;
 if(pstmt!=null)
 try
 { pstmt.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 pstmt = null;
 if(this.dbConnection!=null)
 try
 { this.dbConnection.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 this.dbConnection = null;
 /* Regardless of what happens we need to return an array of Objects.
 * If the returning value is null it should be handled by the
 * calling class. */
 return(data);
 /** If a regular sql statement is required this method will be called
 * by the executeQuery method. */
 private ArrayList executeRegularQuery() throws SQLException
 // Define the local variables that will be used within this method
 ResultSet rs = null;
 Statement stmt = null;
 ArrayList data = null;
 // End local variables
 try
 stmt = this.dbConnection.createStatement();
 rs = stmt.executeQuery(this.sqlQuery);
 /* Closing the Statement is going to cause the ResultSet to be
 * inaccessible. Therefore it is necessary to move the data
 * that has just been aquired into an alternate data storage
 * object.*/
 data = processResult(rs);
 // Clean up all of the db resources we have opened
 rs.close();
 rs = null;
 stmt.close();
 stmt = null;
 this.dbConnection.close();
 this.dbConnection = null;
 /* No exceptions are caught. They should be dealt with by the
 * calling class. */
 finally
 /* If an exception was thrown during the execution of the
 * sql query there will still be open db resources. They need
 * to be closed. */
 if(rs!=null)
 try
 { rs.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 rs = null;
 if(stmt!=null)
 try
 { stmt.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 stmt = null;
 if(this.dbConnection!=null)
 try
 { this.dbConnection.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 this.dbConnection = null;
 return(data);
 /** If a prepared update is needed this method will be called by the
 * executeUpdate method.*/
 private int executePreparedUpdate() throws SQLException
 // Define the local variables that will be used within this method
 PreparedStatement pstmt = null;
 int rowsAffected = -1;
 // End local variables
 try
 pstmt = this.dbConnection.prepareStatement(this.sqlQuery);
 setSqlValues(pstmt, this.sqlValues);
 rowsAffected = pstmt.executeUpdate();
 pstmt.close();
 pstmt = null;
 this.dbConnection.close();
 this.dbConnection = null;
 /* No exceptions are caught. They should be dealt with by the
 * calling class. */
 finally
 /* If an exception was thrown during the execution of the
 * sql update there will still be open db resources. They need
 * to be closed. */
 if(pstmt!=null)
 try
 { pstmt.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 pstmt = null;
 if(this.dbConnection!=null)
 try
 { this.dbConnection.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 this.dbConnection = null;
 /* Regardless of what happens we need to return an array of Objects.
 * If the returning value is -1 it should be handled by the
 * calling class. */
 return(rowsAffected);
 /** If a regular sql statement is required this method will be called
 * by the executeQuery method. */
 private int executeRegularUpdate() throws SQLException
 // Define the local variables that will be used within this method
 ResultSet rs = null;
 Statement stmt = null;
 int rowsAffected = -1;
 // End local variables
 try
 stmt = this.dbConnection.createStatement();
 rowsAffected = stmt.executeUpdate(this.sqlQuery);
 // Clean up all of the db resources we have opened
 stmt.close();
 stmt = null;
 this.dbConnection.close();
 this.dbConnection = null;
 /* No exceptions are caught. They should be dealt with by the
 * calling class. */
 finally
 /* If an exception was thrown during the execution of the
 * sql update there will still be open db resources. They need
 * to be closed. */
 if(stmt!=null)
 try
 { stmt.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 stmt = null;
 if(this.dbConnection!=null)
 try
 { this.dbConnection.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 this.dbConnection = null;
 return(rowsAffected);
 /** used to iterate through the sql values and add them to the
 * prepared statement object. */
 private void setSqlValues(PreparedStatement ps, Object[] values) throws SQLException
 for(int i=0;i<this.sqlValues.length;i++)
 Object o = this.sqlValues;
 /* SQL starts counting at 1 not 0, so this loop needs to be
 * incremented by 1 for the setObject method to interpret it
 * correctly. */
 ps.setObject(i+1, values[i]);
/** Used to copy a result set into a persistent object so that it can
* be used even once the connection to the database has been closed. */
private ArrayList processResult(ResultSet rs) throws SQLException
 ArrayList data = new ArrayList();
 ResultSetMetaData rsmd = rs.getMetaData();
 int colCount = rsmd.getColumnCount();
 while(rs.next())
 Object[] currentRow = new Object[colCount];
 for(int i=0;i<colCount;i++)
 currentRow[i] = rs.getObject(i+1); //SQL starts at 1 not 0
 data.add(currentRow);
 return(data);
Thanks for the input,
Ryan

I think I have an idea of what you mean. I just want to make sure before I write everything though. I could implement your idea by doing the following right?
I haven't tried any of this, so if there's minor (syntax) errors just ignore them. I'll fix them later.
1. Create the following Interface.
package com.vacode.beans.sql;
public interface GruntBeanProccessingModule
 public Object get(Object[] properties);
}2. Force the subclasses to implement the above interface
public class EmployeeProcessor implements GruntBeanProcessingModule
 public Object get(Object[] properties)
 //make sure the input array is the right length (+ other validation, etc.)
 //create a new EmployeeBean
 //set all the EmployeeBean properties based on the input Object[]
 //return the EmployeeBean
}3. Make the following additions to my SQLGruntBean class
private requestedClassType = null;
public void setRequestedClassType(Object o) // o must be an instance of the requested class
 this.requestedClassType = o;
//if requestedClassType isn't null then create the ArrayList like this
while(rs.next())
 Object[] currentRow = new Object[colCount];
 for(int i=0;i<colCount;i++)
 currentRow[i] = rs.getObject(i+1); //SQL starts at 1 not 0
 Class requestedClass = Class.forName(requestedClassType.getClass().getName());
 GruntBeanProcessingModule gbpm = requestedClass.newInstance();
 Object convertedData = gbpm.get(currentRow);
 data.add(convertedData);
 }Of course I'll have to handle any possible exceptions (requestedClassType isn't an instance of GruntBeanProcessingModule, etc.). I also notice the forum replaced some of my [] with <> (I've seen it before though, so you probably already know about it).
Did I get it right or am I out to lunch :-)
Thank you very much for the feedback,
Ryan

How to clear the open items and parked items for customer

Hi Experts,
I need to clear the open items and parked items for customer.
So any one could let me know the transaction code and procedure for clearing the items for customer.
Best regards,
Kesava balaji.

Hello,
Parked items will have NO RELEVANCE, unless you post it.
You CANNOT clear parked items.
You can clear the posted items using F.13 or F-32
Regards,
Ravi

ORA-01589: must use RESETLOGS or NORESETLOGS option for database open

Hello,
Yesterday i did a clean install of XE on my Windows 7 64bit laptop. The installation went well. Today when i tried to connect to the database i got ORA-01033 initialization or shutdown in progress.
So i started sqlplus as sysdba and executed
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1388352 bytes
Variable Size 620757184 bytes
Database Buffers 444596224 bytes
Redo Buffers 4591616 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
The alert log is showing the following output
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =19
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
Using parameter settings in server-side pfile C:\ORACLE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DATABASE\INITXE.ORA
System parameters with non-default values:
sessions = 176
spfile = "C:\ORACLE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DBS\SPFILEXE.ORA"
memory_target = 1G
control_files = "C:\ORACLE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "C:\oracle\app\oracle\fast_recovery_area"
db_recovery_file_dest_size= 10G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "C:\ORACLE\APP\ORACLE\ADMIN\XE\ADUMP"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "C:\ORACLE\APP\ORACLE"
Wed Sep 07 09:26:50 2011
PMON started with pid=2, OS id=4936
Wed Sep 07 09:26:50 2011
PSP0 started with pid=3, OS id=4756
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !
Wed Sep 07 09:26:51 2011
VKTM started with pid=4, OS id=5772 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Wed Sep 07 09:26:51 2011
GEN0 started with pid=5, OS id=5424
Wed Sep 07 09:26:51 2011
DIAG started with pid=6, OS id=5928
Wed Sep 07 09:26:51 2011
DBRM started with pid=7, OS id=4000
Wed Sep 07 09:26:51 2011
DIA0 started with pid=8, OS id=3876
Wed Sep 07 09:26:51 2011
MMAN started with pid=9, OS id=6004
Wed Sep 07 09:26:51 2011
DBW0 started with pid=10, OS id=5252
Wed Sep 07 09:26:51 2011
LGWR started with pid=11, OS id=848
Wed Sep 07 09:26:51 2011
CKPT started with pid=12, OS id=2420
Wed Sep 07 09:26:51 2011
SMON started with pid=13, OS id=2424
Wed Sep 07 09:26:51 2011
RECO started with pid=14, OS id=2396
Wed Sep 07 09:26:51 2011
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Wed Sep 07 09:26:51 2011
MMON started with pid=15, OS id=2388
starting up 4 shared server(s) ...
ORACLE_BASE from environment = C:\oracle\app\oracle
Wed Sep 07 09:26:51 2011
ALTER DATABASE MOUNT
Wed Sep 07 09:26:51 2011
MMNL started with pid=16, OS id=1288
Successful mount of redo thread 1, with mount id 2642331547
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Wed Sep 07 09:26:56 2011
ALTER DATABASE OPEN
Errors in file C:\ORACLE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_2212.trc:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
ORA-1589 signalled during: ALTER DATABASE OPEN...
Wed Sep 07 09:41:54 2011
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Can anybody tell me what to do to solve this problem?
Kind Regards,
D.

DennisV wrote:
Starting ORACLE instance (normal)What do you have in the alert.log above that line?
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !This is one of the symptoms reported earlier when running on unsupported platform (x64) and maybe there's some connection with your issue.
See {thread:id=2278170}.
Errors in file C:\ORACLE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_2212.trc:What errors does trace file reveal?

Park option for T Code FBS1....

Similar Messages

Maybe you are looking for