Park Post option in F-48 & F-53

Hi
My client has requirement in Payments (F-53) & Downpayments (F-48) that entry must be entered by someone else & it must be posted by someone else after verification.
There is park & post option in FB60, FB70, etc. But there is not such parking & posting option in Payments (F-53) & Downpayments (F-48).
Now, Cleint has one requirement regarding payment & down payments. They want parking & posting option in F-53 & F-48.
SAP doesnot provide for parking & posting option for F-48 & F-53.
This control is generally required by many people. So tell me how to fulfill cleint requirement.

Hi Deepak
In my company this is done through Workflow. Once a user post a document via F-48 or F-53 in will sits in the appropriete approver's sap inbox. Then approver will check the document and post it.
For example;
If the amount is less then 50000 it will routed to MR. A 
If the amount is form  50000 to 100000  it will routed to MR. B and so on.
Or, you also can ask your abaper to create a new user exit (customized screen) for you? 
Thanks
Krish

Similar Messages

  • Park post option required in FBS1

    Hi
    My client is using FBS1 for accrual & defferals. In FBS1, i want that entry should be entered & parked by one user and the same must be approved by his senior.
    After i entered all the details in both the line items, i went to document tab. There i was able to see park / hold option. But it was greyed out. Only simulate and post option were open to select.
    Let me know how to bring this park & post option in FBS1.

    Hi,
    It is a system design that for 'Park' or 'Hold' are not available(greyed out ) for accrual documents (FBS1). The reason of this is because an accrual document requires a reversal date and a held document cannot handle a reversal posting.
    For further information on this function, kindly go through note 492006 where it indicates that : -
    'Special transactions such as FBB1, FBS1, FB41 cannot and must not be parked since subsequent processing using FBV0 is not possible.'
    so if you are using this change may be you will face some issue while posting through FBV0.
    Regards
    Ravinagh Boni

  • PARK & POST BILLING DOCUMENT FOR CUSTOMER.

    Hello Gurus,
    I am asked to set a Park & Post option for Billing Document for Customer i.e. outgoing invoice to customer.
    how can i do this??
    Kindly guide.
    Regards
    Swati Bhatt

    Hello
    Park & Post Billing Document
    This functionality is available in MM/FI.
    You can use Billing Block functionality in Billing Doc type (Tcode VOFA) by activating Posting Block indicator.
    To release them to accounting, either you can individually or you can use VFX3 for collective release of billing doc to accounting.
    Thanks & Regards
    JP

  • FBV0 POST option is disabled for Vendor Invoice

    Hi,
    We have workflow intiated for Journals to post and not for customer or vendor invoice. But when i Park Vendor Invoice via FV60 and try to post it via FBV0, the POST option is disabled. No Problem with Authorizations. Please suggest a solution.

    Hi Venkatesh,
    Once you activate workflow for parked documents, You won't be having the option to post manually. It has to be released by authorised person. I think it can be resolved by avoiding workflow task to a particular transaction(FV60 or FV70). Please contact your workflow consultant for this.
    Regards,
    Prasad

  • Workflow Parked Post Document

    Hi
    We have confired standard FI workflow for Parked post document. When we parked the document email is sent to the approver at his SAP inbox. When he releases the parked document still it does not post and he has to call again the document and click on complete option to post it. Please advice if this is standard behavior or if we skip something in configuration
    Thanks and Best Regards
    Farhan Qaiser

    Hi Frahan,
    we have done the workflow for :
    1.  POs where it goes as an email to the next level for approval.
    In the email it has been the info will be there about the PO and at the same time another email will be dropped in SAP INBOX, where the approving person gets the T.code to release the PO.
    2. In Parked Documents also an email will be fired for info and also at the same time another email will be dropped in SAP INBOX to complete the SAP Transaction in the system.
    Hence, the system is behaving according to the standard itself.
    Thanks,
    Maqsood

  • SOD - Park & Post FI Invoices

    Hi All,
    As a part of Segregation of Duties(SOD) we are segretating the park & posting of invoices. We are able to succesfully remove post in FV50 through BTX 1140. However, system is forcing to give FV50 for the user who is having posting through FBV0. Any ideas on how to restrict this?
    Basically the user who is having parking should n't have posting option(which is done already) and the user who is having posting should not have auth. for FV60.
    Thanx in advance.
    Regds,
    Krishna

    Hi Krishna,
    Did you get any solution to your problem. I have exactly same issue per SOX requirement and need to display document(FBV3) instead of edit parked document(FV50) when choose a document from FBV0.
    Regards,
    Seema

  • Limiting Header Fields for Parking / Posting

    Is there a way through configuration to prevent a user from providing values in specified header fields?  Please note I am not referring to the ability to change header fields after they have been posted which is part of OB32 change rules configuration.  I need a way to limit the fields for posting BEFORE the system parks / posts it in FI.

    Go to transaction SHD0 and maintain the relevant fields which you dont require as invisible in the screen layout for posting for the relevant transaction. Also check FB00 for editing option to suppress certain fields while entering document.
    Thanks and regards
    Kedar

  • Std Work flow for Invoice Parking & posting

    I am working om std SAP workflow for invoice document parking :
    I have done the following activities :
    1. Activate Work flow Template for Document Completion
    Here i activated the event "Complete the Parked Log. IV Document"--> Incoming Invoice Document Parked. It is showing a green traffic light .
    In agent assignment
    Complete the Parked Log. IV Document>Complete the Parked Log. IV Document>Complete the Parked Invoice--> i have assigned the user MMCONFIG
    2. In Define Release Criteria i have the following settings :
    1000 H Credit 0.01 INR US MMCONFIG
    1000 S Debit 0.01 INR US MMCONFIG
    3. In Activate Workflow Template for Release for Posting
    Here i activated the event Incoming Invoice Complete: ReleaseRel & i m getting a green traffic light .
    In assign agents i did the following
    Release the Completed Log. IV Document>Release the Completed Log. IV Document>Release the Completed Log. IV Document i assigned the user MMCONFIG
    In Invoice Parking: Approve Release i assigned the user MMCONFIG .
    For Invoice Parking: Release Invoice
    Invoice Parking: Posting an Invoice " I AM NOT ABLE TO ASSIGN ANY USER AS THESE ARE BACKGROUND TASKS ".
    Now when do a MIR7 - Park invoice & save the invoice as complete i am getting a mail in the mail box of MMCONFIG saying :
    "Invoice Release 5105xxxxxxx 2009, Completed by MMCONFIG "
    I go & release the same invoice .
    Then i executed MIRO & tried posting the released invoice . The sysem doesnt allow me 2 post the invoice .
    It automatically goes to MIR4 transaction & forces me to save as complete
    if i try to post it the system says "Parked document is release-relevant and cannot be posted"
    Pls tell me how can I post the invoice & IF MY SETTINGS FOR THE WORKFLOW IS OK ???
    Regards
    Anis

    Firstly,  check with the Binding of the event and workflow, if they are fine
    then check if the workflow gets triggered when you are posting... to check this,
    First go to transaction SWU8 - turn on the workflow trace and then
    Proceed with posting the invoice
    go to transaction SWU8 again and then turn off the workflow trace
    go to SWU9 - to check which all workflows got triggered....
    If there is any workitem in your workflow, then go to SWI1 and select the workitem of that workflow and press shift+F8 to check the status of it and also check to which all agents it had sent...
    If possible just give a hardcoded value in the workitem for testing purpose and check if that goes properly, later on implement the rule.....
    If the workflow does not triggere - go to transaction SWETYPV and deactivate and activate the event linkage with that workflow....
    Regards,

  • MIR7 Parking & posting error

    Dear Sapguru,
    We had recently implemented MM-FI module. Invoice is parked/post through transaction code MIR7/MIR6. We have applied the user exit for maker checker validation while parking and posting the document. So the person who will park the document will not able to post the same. The user exist was working fine in production up till now.
    Yesterday,on PROD system maker was able to park & post the document. while doing the same he has followed the below process :
    Parked the invoice through t code - MIR7
    Changed parked document through - FBV4 (Only posting date changed)
    While changing parked document, he was able to post the same.
    We are also able to produce the same case only once in the quality system
    Kindly suggest if any standard validation is availabe for the same.
    Thanks & regards
    Varsha Patil

    Hi,
    check if the user in question had permission for  AUTHORITY-CHECK OBJECT 'M_RECH_WRK'.
    Have a look at this thread:
    MIR7 posting issue
    Best regards.
    Edited by: Pablo Casamayor on Dec 21, 2011 3:08 PM

  • Park&Post Workflow ?

    Hi Gurus,
    I got the requirement on Park & Post Document Workflow. After the creation of the Application FV50. when i press SAVE AS COMPLETED or POST . then the Workflow will trigger. how can we do it ?

    Hi,
    As I dont have SAP access at the moment I can only give you a high level design.Try to find the relevant customer exit,badi or enhancement spot and trigger the custom template via swe_event_create or sap_wapi_create_event FM`s.
    Thanks and Regards,
    Srini...

  • "Tap to tweet" and "tap to post" options have gone in my notification centre

    I have the iPhone 5 and I noticed when I first had it that I did have the "tap to tweet" and "tap to post" options in my notification centre but they've somehow gone and I'm not sure why this is. Somehow the "share widget" option isn't in my notification section of settings either because apparently that's how you turn it back on! Somebody please help???

    Check Settings App > Notifications. Then scroll down to Locate the ShareWidget. The Twitter and FaceBook aps also have to be turned on (in general, but not in Notifications).
    After checking eh settings, if you still do not have those options, Ttry a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • A04 POST option missing in dropdown in  ARE1 and ARE3 transaction

    Hi! All,
              While using transaction J1IA101 and J1IA301 , I am not able to see the A04 POST option in the drop down. It seems to be missing. Please help.
    Regards,
    Ashutosh Kumar Sinha

    Hi
    In order to have the option of A04 POST in J1ia101 or in J1ia301 you have to add the t codes in below path
    IMG-Logistics - GeneralTax on goods movement India-Business Transactions-Incoming Excise Invoices-Define Processing Modes Per Transaction
    On the change view screen of Define Processing Modes Per Transaction
    You have to add
    J1IA101 and select the Processing Mode as A04 and check the box ACTIVE
    the same has to be repeated for J1IA301
    regards
    Prashanth

  • MIR7 - USER RESTRICTION IN PARK & POST

    Dear Guru,
    I have scenario where I would like to place user restriction for parking & post of document in MIR7, further there is any kind of validation check I can place or authorisation check from bases will do or any other way pls advice in detail.
    Thanks in advace.
    Vishal

    Hi vishal sharma,
    For this Authorisation is enough .validation is not required .check it out with your basis team.
    Regards
    Surya

  • Poster option grayed out

    ever since we upgraded to osx 10.9.2 this week, i can not print my patterns using the poster option. it is simply grayed out and wont let you choose it. i have never had this issue till the update, and at first i thought it might be driver compatibility, but i updated all of that and talked to hp and they said everything was ok on their end. now im exploring adobe since that is what i have always used to open them. please help!

    Chris,
    As you have seen and Jbowden points out, one must first click on the Chapter Point - it turns red. THEN, the Poster Frame can be set to one's choice of locations, usually where they have placed the CRT.
    As some Video will get both the Chapter Point AND the Poster Frame set upon Import_as_Timeline, there are instances where both are created, and one just has to drag the Poster Frame Marker to the desired location.
    I often forget to do that initial click, myself, and am reminded, by a greyed-out "Set Poster Frame." It happens to all of us.
    Good luck,
    Hunt

  • On my Macbook pro not working Facebook click to post option

    i dont kno what happend now i saw my facebook click to post option not working when i click no responds
    pleas help me ... any kno how to fix this issue ..

    MacBook Pro (13-inch Mid 2012), OS X Mountain Lion (10.8.4)
    my Os

Maybe you are looking for

  • IPhone Reminders App Won't Sync

    My iPad, iMac and iCloud web page all sync with Reminders, but not my iPhone 4. anything I enter (Reminders, Lists) on the phone only stays there and won't sync, even though I have it turned on in iCloud settings.

  • (How can we) Export FXG from Flash Professional using JSFL

    How can we export a selection from Flash Professional as .FXG using JSFL? It appears that this is not possible... just yet! I have added this as a feature request within the Adobe Labs site for Flash Professional. Someone at Adobe suggested that I al

  • My MacBook Pro suddenly started freezing. Getting error code -5010D. Any ideas?

    Yesterday I noticed my MacBook Pro started freezing up for a few seconds when doing easy tasks, like typing a FB message or browsing. It doesn't seem to be related to anything I'm actually doing, which makes me think it's a hardware problem. I can re

  • Why is the sync option from iMac to iPad mini not working

    I have a IMac and an iPad mini (new) I have iPassword on my Mac and have set up the option on both Mac and iPad to sync iPassword between the 2 . Part of this set up is setting up 'secret' word and when on the ipad all i have to do is entering the "s

  • Direct database data access without data level authorization check

    Hello, My customer raised issue about direct database data access. Due to the customeru2019s strong security policy, it shouldnu2019t be allowed. To prevent this kind of illegal data access, customer ask me to list up all the possibilities to display