Parked Documents by Reason code Volume and Value

Hi Guys,
Requirement relating to Purchasing/Procurement
i have requirement to show the Parked documents (Issues) by Reason code volume nd value in report, can any one help me what is the field names for Parked & Reason code documents, Value Volume nad tables relating to that?
Thanks in advance.
manoj

until I remove the filter (and thereby increase the data volume).Well, that's one way of looking at it. Another way of looking at it is that you are now including in your MERGE some record with a column whose value exceeds the permitted length of the matching column on your target table.
So you need to compare the columns sizes of your source and target tables to identify candidates, then find the culprits using
SELECT * FROM source_table
WHERE length(col44) > 90
OR length(col47) > 1
/Cheers, APC

Similar Messages

Park document approach for all PO and Non u2013 PO based vendor Invvoices

Hello Experts,
I want to use park document approach for all PO and Non u2013 PO based vendor Invoices.SAP
Allows park document facility for FB60 ( Non-Po Based vendor Invoice)but doesnt allow the
Same functionality for MIRO ( Logistics Invoice Verfication).Can anyone suggest a wayout for Park
Document functionality for MIRO
Thanks and Regards
Urmila

Hi,
Transaction MIR7 can be used to park PO-based invoice. The same can be posted through MIRO.
Regards,

Park Documents for T.codes F-28, F-44, and F-54

Hello guru....!
Here at one of My client requirement is parking documents while using T.codes F-28, F-44, and F-54. Is it possible to park documents while doing any transactions using through above mention t.codes? also can we restrict through giving any user authorization to park documents.
can anyone please help me to come out of this requirement.
Regards
M.Sudhan

Hi,
Thanks for your replay,
But I have suggested to user use T.codes instead of F-02 use F-65, for FB50 use FV50, for FB60 use FV60, with removing the posting option in this codes through giving authorization.
Regards
M.Sudhan

Workflow report by parked document number / Company code / Year

Hi,
I need to develop an new ALV report to find out the status of the parked document.
The selection criteria will be as below:
1. parked document number
2. Company code
3. Fiscal year
The out put of the report should have the below details.
1. Document Parked by
2. Status (Error/in process/processed)
3. Approver name1
4. Approver Name2 and all the approver names.
5. Error Message (If any).
I am not able to figure out the link between the parked document number and the workflow.
Please help me on this.
Thanks,
Shiva.

Thanks much Jai,
I got all the work item id for this table (SWW_WI2OBJ) but how can i differentiate them. For example which work item id is to find out managers and which one to find out the status and so on....
and how can i find out list of all the approvers for a particular parked document number.
Thanks,
Shiva

F-58 - Void reason code : 2 and Page overflow

Hi,
May i know what does it means by Page overflow in F-58.
Thanks.
Joo

Hi,
Type of Void Reason Code for the Print Program
The user chooses void reason codes to select checks that can no longer be used for payment.
Some void reason codes are reserved exclusively for the system: They are only used by the automatic print program. These void reason codes cannot be employed by the user.
Example
Trial printout, page overflow, and form summary section are used exclusively by the check print program. It is also possible to create so-called "zero net checks" (Functionality for USA and Canada).
Here you can do cofig for void reasons in "FCHV"
Hope understood and you can reward if you are cleared.
Thanks,
Vasu..

How to create UCCE CTI Toolkit Custom Reason Codes

Hi,
I am wondering about how to create UCCE Custom Reason Codes for CTI Toolkit.
Do we have to assign text to the values which comes from the registry in CTI OS Server?
Quote from: CTI OS System Manager Guide for Cisco Unified ICM/Contact Center Enterprise & Hosted Release 9.0(1)
To define the text that appears for each Logout reason code in the Select Reason dialog box, set the value data associated with the reason code to the text you want to appear for that reason code.
Regards,
ACK

Hi,
CTIOS custom reason code should be created in the registry along with their value. For Logout and NotReady you need to create new DWORD value where Name will be the reason code description and value data will be reason code. For wrap -up you need to create a new string value where data value will be the wrap-up description.
Below are the loction where you need to change the registry file.
HKEY_LOCAL_MACHINE/Ctios/CTIOS_instance name/Server/Agent/ReasonCodes/Logout
HKEY_LOCAL_MACHINE/Ctios/CTIOS_instance name/Server/Agent/ReasonCodes/NotReady
HKEY_LOCAL_MACHINE/Ctios/CTIOS_instance name/Server/Agent/WrapupStrings/Incoming
Regards,
Ashfaque

Storing the Variance Block Reason Code in the Parked Invoice Document

Folks,
When I perform parking an incoming invoice (MIR7 or MIRO), system checks for price variance and issues the message. When I save the document, block reasons are not stored at Parked document level. Only when I post the document, the reason code 'R' is stored in the document.
Is there a way to get the Block reason in the parked document?
Thanks in advance. Murali

I am still researching this issue. Let me know if there are any options or ideas.
Thanks.

Parking document and relase document.

Hi,
we are using Ecc5.0 version,
we need this process.
1. If user A has to park the all documents ( he should not get posting authorisation for these documents)and user B should post those documents.
2. If user B has to park the all documents ( he should not get posting authorisation for these documents)and user A should post those documents.
how to park vendor and customer payment related entries ( and also advance payments)
please give me any inputs on this issue.

Hi
You can activate the workflow so that an email will be triggered to the other authorised person to post the parked document. SAP delivers with a standard workflow WS00400004 which should be activated.
if you have knowledge i shall send you a documentation to your email id or please seek the help of your ABAB consultant.
in the standard workflow WS00400004 you have different tasks as below
Workflow triggers based on the business object (BUS number) and triggering event.
Triggering events are namily Created, Changed, Rejected, Completed
Based on the triggering event you define in the task the workflow is triggering an email. It is very easy to configure.
Whenever a parked document is created, the workflow system triggers an email to the other person who can view the parked document in his business workplace and post or complete the document.
Please give me your email ID so that i shall send you the procedures for activating the workflow.

FBS1 - Park Document

Hi Guys,
We wanted to Park accrual document. We are posting accruals through T.Code FBS1, but system is not allowing to PARK the document. It is grayed out in manu path.
Did anyone had this issue? Please help.
Thanks,
Pawan

We got answer from SAP. We can not PARK or hold document through FBS1. Reason is because accrual documents have reason code and reversal posting date and technically, document can not be PARK or hold with these values.
Pawan

Reason Code automatically defaulted in dispute created from FBL5N

Hi Guys,
Your help would be greatly appreciated here.
We have a situation where ONLY for document type RV (Billing transfer), the reason code is defaulted to "AA" awaiting audit. This happens when I select a particular customer invoice from FBL5N and create a dispute from there. While creation of dispute, it does not ask me for any reason code entry and is not even there as an input field, but when I save this dispute and view it in the corresponding FI document, the reason code gets populated as AA in additional information tab of financial document.
We want to change this reason code from AA to DI but we dont seem to find where to change this.
I have revisited every possible configuration for dispute management and even checked "Define Default Values" in dispute management and we have not mentioned AA as default value anywhere. But we are not able to find it. Note: This is happening only for document type RV and for other doc types no reason code gets updated.
Is there any configuration which I might have missed?
Regards,
Sweta

Hi Mark,
I was hoping you would respond to this considering your experience in this. I have checked for substitutions already but there is no such substitution which exists. Our technical team is trying to find out if it is hardcoded but they have not had any clue so far. Some routine would hardly be a case because the accounting document is already existing and after this the dispute is being created. i.e. the dispute is not getting created on the SD side nor it is getting created at the time of transfer of docs from SD to FI. It is purely during FI-Dispute link up after SD part is over. However, I will still tell my technical team to look into it.
Regards,
Sweta

Is there a way to hide some reason codes in dispute management without deleting?

Within SAP Dispute management (UDM_DISPUTE) we would like to remove some of the available reason codes in the drop down on the search screen and available to assign drop down, but not physically delete them. Is there a way to do this?
I know if I physically delete them out of the Reason code list (SPRO -> FSCM -> dispute management -> Dispute Case Processing -> Case types -> Create Values for Attribute "Reason") then if an old dispute case that used that reason code is displayed, the four digit number code will be displayed rather than the description. So we would prefer to not physically delete the code / description from the reason codes but somehow make them non-display, or inactive.
Any thoughts on this?

Hello Stephen,
you may consider the functionality "personal list", putting all valid reason codes in and leaving out those you do not want to show. Maybe your Authorisation / Security Team can also help you performing this exercise for all affected users at once.
Regards,
Christoph

Reason Code for Reversal

Dear Experts,
When I am doing reversal of any document using FB08, I am giving reason code as Cheque Bounce or some other reason code. But when I am viewing the same document, the reason code is not available.
I have checked the same in BKPF but the same is not available there also. Please advise why the reason code is not posted in table.
Thanks,
Deb

I have tried with all fields you have mentioned, but unable to find the entry for the reason. I think there could be some problem in "Reasons for Reversal" settings in SPRO. There have 2 combination of selections, 1 for negative entries and another is for Alternative Posting dates. I have also tried with all the combinations, but still it is not working. Please advise if there is some other combination or assignments for these codes to somewhere to get the desired results.
Thanks,
Deb

Validation on Post Parked Document via SAP Workflow (SAP Business Workplce)

Hi,
I have create validation rules, and I have excluded t-code type FBV0, FBV1 and FBV2 by following SAP Notes 158739 in that validation prerequisites, so when user post parked document using t-code FBV0 the validation is not carried out and it's work perfectly.
But when user try to post parked document using SAP workflow, the validation was carried out hence, user can't post the parked document. Does anyone now how to resolve this? Appreciate your advise to solve this issue. Thanks.
Regards,
Bobby

In FBV0 use document list and the try and post it
Cheers
Prakash

What table that keep "Park document" data ?

Hello
i need to create customized ABAP report about Park document data.
such as data Doc. number,Vendor number,Vendor name,Amount,Tax code , GL , Cost center ,Internal order .
i found that park document keep in table VBSEGS.
and i try to find detail data in table BSEG but not found.
please tell me table that keep park document information.

Hi,
VBKPF     for Document Header for Document Parking (And BKPF with document status as "V")
VBSEGA                         for Document Parking - Asset Database
VBSEGD                         for Customer Document Parking
VBSEGK                         for Vendor Document Parking
VBSEGS                         for Document Parking - G/L Account Databas
VBSET     for Taxes Document Parking
VBSEC for One-Time Data Document Segment
Regards,
Gaurav

Re-assign user or agent in Parked document workflow

Dear Sir,
We have a situation where we are required to change the user for posting/releasing the parked document.
The situation is currently we have only one user assigned to releasing the parked document. Now that person has gone on leave for one month. There are certain already parked documents and are lying in his inbox for release. We want to re-assign these document to another user.
How to achieve this.
Thanks in advance.
RK

Dear RK,
> Goto TCode OBWA and create Workflow variant for Parking Documents
> then Goto TCode OBWJ and assign your company code to the workflow variant.
Following link would be very helpful to you for creating workflow.
http://wiki.sdn.sap.com/wiki/display/Snippets/ConfiguringparkingdocumentsworkflowinSAPsystem.
I hope this will solve your query
Regards
Saurabh

Parked Documents by Reason code Volume and Value

Similar Messages

Maybe you are looking for