Parrallels or boot camp ?

I don't do anything fancy but need/want to use Win Vista (home pro) on new Mac Mini (Leopard, 2 GB RAM) 95 % OS X 5 % XP - have to reboot with boot camp but it's included with X - parallels $ 79.95 but more convenient - any opinions ?
x86 Linux box - G3 iMac Mac OS X (10.3.9) iPod nano - Mini in the future

Parallels + WinXP on a 2 Gig Mac Mini is a great combo for productivity apps. No good for action games.
MS requires a rather expensive version of Vista if you want to run it in a virtualized environment (ie Parallels). Vista also want lots of RAM, so it will not have as good performance on Parallels as WinXP would.
If you need Vista, BootCamp (which may be built into Leopard) will be the way to go. You won't need the expensive version of Vista, since BootCamp isn't virtualization.

Similar Messages

Would you recommend parrallels or boot camp

Would you recommend Parrells or boot camp for using Windows on and MacBook Pro.

Depends upon your needs.
Virtual machine software w/Windows. Runs Windows in a window on OS X.
Pros:
A: More convenient, easier to revert to earlier "snapshots" of the entire OS state, as many as you need.
B: Switch back and forth between Windows and OS X quickly.
C: Great for low demand programs most people use.
D: More stable and less hassle, vm software takes all the work out.
E: Malware/pr0n attack, just flush the whole OS and revert to a earlier version.
F: Doesn't require space hogging drive partitioning
G: Run other versions of Windows, even Linux, all at the same time as long as you have the memory.
Cons:
A: A performance hit especially if your hardware is weak or you have a demanding program(s).
B: 3D games run about 1/5th the performance of native boot.
Bootcamped Windows
Pros:
A: full hardware access and performance
Cons:
A: A hassle to set up, even though Apple assists a lot, Windows doesn't help.
B: Drivers for the hardware come from Apple.
C: Having to reboot to use it.
D: Malware attack, your dumping Windows and reinstalling.
E: Must dedicate a set space for Windows to use on the drive (aka partition)
F: Must hold option key to boot into either OS. Only one can be set as the default boot OS.
G: Can only run Windows 7 64 bit, although tweaks perhaps can run others.
Both:
Some VM software will take the previous Bootcamp install and make a virtual machine out of it to run in OS X.
So for day to day use of Windows for low key programs you use the vm, and for 3D games and other heavy performance you direct boot.
If you keep the Bootcamp Windows off the Internet and accessing shared files, emails etc from other Windows, don't install crap in there and keep it virgin as possible, it will be fine and malware free.
Leave all the risk behavior on the vm Windows, that way you can flush it quickly.
Microsoft validation works fine in either as it's all the same hardware.
Virtual machine software choices: VmFusion, Parallels, free VirtualBox.

If I want to run OSX Server and also want to run Windows 8 on Boot Camp, will server still run when I boot into windows?

I want to set up OSX Server on my iMAC running Mavericks and also install Windows 8 on Boot Camp. If I do this and boot into Windows, will that prevent server from running while I'm in Windows?

No. Bootcamp, as you've described, requires rebooting into your chosen operating system. If you want to run both OS X and Windows at the same time from your hardware, look at virtualization tools like Parrallels or VMWare.
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

Install Windows on Mac Pro Retina without Boot Camp

Hi,
I have downloaded a Win 8 ISO, used Boot Camp to "burn" the ISO image to flash. Then I used Boot Camp and downloaded related drivers etc. to the flash. Then when I chosed to install Windows using Boot Camp, I received "Insert disk to be recognized" etc - meaning it does not see Win 8 that it just "burned" to the flash. Being a tech guy, I decided to go other way - found Disk Utility and shrinked the Mac partition freeing some space for Windows partition manually. Then I decided to actually install Windows - I restarted, hold Control and finally successfully got to the Win8 installation shell. So far it worked. But then I stopped - right before clicking Format on the new partition I created. I realized that when I did that before on PCs the new Windows updates the MBR that it becomes the only bootable OS. Naturally I don't want that, I want both OS X and Win 8. So I cancelled the install and here I am
So my question is - if I bypass Boot Camp and install Win8 manually to the partition I created via Disk Utility, would I still be able to dual boot?
Thanks in advance!

You should be able to hold down the option key on a restart and select what you want to boot from.
If you want to go the virtual route, you can have both running at the same time.
Parrallels
VirtualBox
VM Fusion

Whole disk encryption with boot camp?

I'm a network administrator and have been dedicated Windows until now. We are just about to receive our first Mac Air 13" in the office and trying to work out we can keep our security policy in tact whilst giving the flexibility of using Windows.
Pretty sure we want to do boot camp so the user can decide which OS they want to go into and not have any performance issues.
Do you know of any products that will encrypt the entire hard disk this without giving booting issues?
Alternatively, if these products break booting they would have to log in to the Mac OS and then run a virtual machine (think it's called parrallels). Is there a noticable performance hit on this?
Thanks in advance - this is very new territoty for a long term windows fan boy
Adam

The encryption is dependant on the OS version. To my knowledge there is no way to Encrypt the Whole Drive with any one piece of software and then install both OS X and Windows on that drive. For the encryption to work it has to work with the OS installed. So you have OS X and then use Boot Camp to install Windows. Then use FileVault in OS X and whatever encryption system you want for the Windows partition/install.
I could be complete mistaken.

Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MC

Michael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

Apple Mini-DVI to VGA Adapter Problems in Boot Camp / Windows

I currently run Windows XP SP2 on my MacBook and recently purchased the Mini-DVI to VGA adapter so I could hook up the MacBook to an external projector, monitor, or TV to display what's on my Windows screen on the external device. However, when I connect it to any external device, it just goes nuts and sporadically continues to make the hardware connect and hardware disconnect sounds and doesn't allow for external output of the screen. Any suggestions...? Thanks!
Marc

I think I solved this problem.
It was in issue for me. My second monitor would only display the Windows XP screen when it was loading, then it would black out. I couldn't even move my mouse arrow to the other side. Then I fixed it, here's how (running Windows XP SP3):
1. Start > Control Panel > Appearance and Themes
2. Display
3. Go to tab "settings"
4. Double click the blue image with the "2" inside it. This is the second monitor, adjacent to your first, or primary, monitor. The blue box may be a desaturated, greyish blue, meaning that the monitor is disabled. Click it and it a box will pop up asking if you want to enable the monitor. Click OK, and then like magic, your monitor is resurected in it's Windows Glory! From there, adjust the resolution, and it should work perfectly.
This isn't a Boot Camp compatability issue, it's just a problem with the lack of familiarity that users of OS X have with using XP.
Have a nice day!
Message was edited by: BlakeTron
Message was edited by: BlakeTron

DVI To Video Adapter on XP using Boot Camp

I bought a DVI To Video Adapter for my MacBook pro. Though is works fine on the Mac OsX, when I tried to use it on Windows XP (using Boot Camp) all I got was a black-flickering image on my TV. Anyone… anything…? Thanx
MacBook Pro Mac OS X (10.4.6)
MacBook Pro Mac OS X (10.4.6)

I'm having the same problem.
It's gotta be some driver problem on the XP side.
I don't know if it's something created by boot camp when it creates drivers for the Mac.
The help i've found for the ATI Mobility Radeon X1600 doesn't describe the options and dialogs I'm working with very accurately.
Called Apple-- they can't support the issue. Turned me back to searching on my own. Boot Camp message boards/ ATI... bummer.
Someone needs to "Hero" us out.

I am trying to install windows 8 at my macbook air boot camp

I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
Please advise..

I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

Can my MacBook Pro use boot camp with Windows 7 with BitLocker encryption?

I'm at wit's end with this, and I'm hoping I can get some advice here. I've read so many forum, posts and reviews that I'm not entirely sure what I can trust.
I have an early 2011 MacBook Pro (MacBookPro8,3). I need to run Windows encrypted for work purposes. It needs to be real windows with full-disk encryption (FDE). The business tools run in boot camp, but not in Parallels, because Parallels doesn't support DirectX 11. I would also benefit greatly from an SSD.
I do not want to do anything hacky like removing the Mac reocovery partition, because I've read that just loading Disk Utility in OS X might mess up your patrition boot tables as it tries to "fix" things. I don't want to have to manually reocover to fix stuff or chance losing data.
I have read (and tried) installing BitLocker on Windows 7 Ultimate under boot camp, but ran into the partition limit on my internal HDD. A maximum of 4 partitions are allowed, and between OS X, its recovery, boot camp, and the Windows partition, all 4 are used.
I have considered one of the following, which may work:
Install OWC's Data Doubler Kit with an additional 240GB SSD (http://eshop.macsales.com/item/OWC/DDMBS6E240/). I would replace the internal SuperDrive with the HDD, and install the new SSD on the faster SATA 6G port. Windows would be installed on the SSD and OS X would stay on the HDD.
Replace the internal HDD with a new SSD (keeping the SuperDrive). I would lose OS X altogether and just have Windows installed.
Forget the entire thing and just buy a PC for work.
My thoughts are that with option both options #1 and #2, I don't even know if these setups will allow BitLocker. In both cases, Windows will be the only partition on the drive, so I'm assuming that when BitLocker is installed, there will be room for the new partition it creates. With option #1, I'm pretty sure I'd still be using Boot Camp, but how would that would for option #2? Is boot camp used even though there is no Mac partition? Would I still need to keey the Mac Recovery partition for this to work? I'd probably need to use Boot Camp drivers under Windows, I think.
I'd certainly be interested in using a self-encrypting drive (SED), especially a SSD, but I'm concerned that most of them appear to require TPM or BIOS functions that Mac's EFI does not provide. Such a drive would allow me to drop BitLocker, but I would need to be use the self-encryption actually works on this setup. From what I've read, most of the SED drives will work just fine under EFI, but you won't be able to set or access the encryption password, which pretty much makes these drives unencrypted.
I've read that BitLocker can be configured to use a flash drive as a decryption key, but I haven't been able to test that yet. I'm tried creating bootable flash drives under Windows and OS X, and none of them seem to appear when I access the boot menu (hold option during boot chime). I don't even know if this system supports bootable USB flash drives, or whether they can be used as a BitLocker key under boot camp.
For the record, I have attempted to use an external thunderbolt drive as my Windows partition, but Windows doesn't want to be installed on removable media, and even if it worked, I believe you can only boot OS X from thunderbolt. I do have a second OS X install booting from the thunderbolt drive, so I know that works. Also, FileVault 2 is installed on my OS X partition, and I read something about FV2 using the Recovery partition somehow so you can't remove the recovery partition to make room for BitLocker.
So ... does anyone have any suggestions preferably based on personal experience as to whether options #1 or #2 should work for my needs?
At this point, I'm really thinking I should just bite the bullet and purchase a PC that I will forever look down upon.

Are you using a MacBook Pro? Is everything installed on the same drive?
I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

HT1461 can i use boot camp if i no longer have my windows xp installation disc?

i have my old PC with XP Pro installed but it's been years since i purchased the computer and no longer have the installation disc. Can i still run boot camp without the disc?

Brad Spalding wrote:
i have my old PC with XP Pro installed but it's been years since i purchased the computer and no longer have the installation disc. Can i still run boot camp without the disc?
You mean, Can I still run boot camp without Windows? because that is what you will have, one empty boot camp partition. Buy a copy of Windows 7.

Boot Camp No Longer Boots- Please Help

Hello - all of a sudden Boot Camp does not show up when holding down the alt/option button when booting up. When I boot into MAC OS, Boot Camp does show up and is accessible. Is there any way to fix this without having to reinstall Windows? Parallels also does not recognize the boot camp partition.
Thank you.

Maybe?
Where in OSX does Boot Camp show up, in the Startup options in System Preferences?

Windows 7 Boot Camp no longer recognize my wireless mouse and Keyboard?

I have a mid 2011 27in iMac on 10.9.1 and I run Windows 7 via boot camp, sometimes Parallels as well. Today I tried to boot up in to Windows via Boot Camp, but I can not control the cursor or input anything via kayboard. This has happened before and I only got it working again after reinstalling Windows, which I am REALLY trying to avoid
The thing is, when I boot in to Windows, it is definitely responding to the keyboard when I hold F8 to go in to safe mode, but once the desktop loads up, I lose any function of mouse or keyboard. Even when I try to manually add a device using a USB mouse, it is not detecting any wireless device.
Both my Magic Trackpad and Wireless Keyboard work fine in OS X, Windows 7 when in Parallels and works during the start up of boot camp, but not when Windows 7's desktop boots up.
Any help would be greatly appreciated!

Welcome to the Apple Support Communities
You have to download the drivers. To download them, press X key while your Mac is starting to start into Mac OS X, open Boot Camp Assistant and follow the steps to download them. You will have to burn them onto a DVD or USB drive, so you will be able to install the drivers on Windows. Then, it should work fine.
If you can't download them in Boot Camp Assistant, download the drivers from this website > http://www.cafe-encounter.net/p682/download-bootcamp-drivers The links are from Apple and that's safe to download and install

MacBook Pro 15" (Late 2013) will not install Windows 8.1 Pro under Boot Camp?

Have spent many hours trying to sort this out. I was told this morning in the end by a 'Senior Advisor' @ Apple that Boot Camp does not support Windows 8.1 Pro so effectively it seems like my only option for a new machine purchased earlier in the week is to return for a refund.
This despite the Apple Spec saying "
Windows 8: Windows 8 or 8.1, Windows 8 or 8.1 Pro (Boot Camp 5 only)"
The subject has been aired in thread https://discussions.apple.com/thread/5474320?start=585&tstart=0 but it has been suggested I post a fresh thread.
I have purchased a new 8.1 Pro license, so this is not an upgrade. I have followed the Boot Camp instructions, including getting the update for this model spcifically, but the nearest I got to a successful install returns soemthing of the like 'Unable to update boot settings' or the like and installation cancels. My machine is a mess I guess now, but in a final effort - does anyone have the step by step 'idiots guide' to working through the setup successfully? I don't want to get involved in massses of messing around with files as this should clearly not be necessary for achieving an advertised solution on a new machine bought within the last week should it?
Appreciate any help - I have up to seven more days left in my option to return for a full refund..... and maybe buy a Dell instead?
PS : We have many Apple products, Air, ipads and iphones so would dearly like to sort this out if possible.
Thanks for any help...

8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
purchase a retail 8/8.1 license
use only a USB2 flash drive
get a clean 8 or 8.1 ISO
newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
if you want to try without clean installing OSX, here goes
open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
restart machine and do a PRAM reset
open du and repair permissions TWICE
open bca and choose all 3 options (create, download, install)
from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
clean ISOs
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

Win 8.1, iMac Retina 3TB Fusion, Yosemite, Boot Camp fail!

I've got a new iMac Retina with the 3TB Fusion drive on which I wanted to install Win 8.1 using Boot Camp. I have VMWare Fusion installed and running, but figured Boot Camp might be better for my needs.
I read the Boot Camp Assistant instructions and it looked like it would be pretty easy to install Win 8.1. WRONG!
I hooked up a USB HD for the driver download, hooked up the USB Apple DVD drive with the Win 8.1 installer, and started up Boot Camp Assistant.
Assistant downloaded the drivers, created the BOOTCAMP partition, then I got into the Win 8.1 installer. Reached a screeching halt when the installer got to the point of selecting where Win 8.1 would be installed. Got the error message about BOOTCAMP partition not being an NTFS drive.
Only one button "Format" to click to make the format NTFS. Confirmed I wanted to format, saw a brief spinning wheel, then supposedly formatting was done. Now Drive 1 Partition 4 lost the "BOOTCAMP" name and displayed no name. The "Next" button wouldn't do anything. I was stuck!
So no go on installing Win 8.1! Booting back into Yosemite and opening Disk Utility I see the Boot Camp partition, now named "untitled," identified as an NTSF volume!
I see a number of posts here where by using Terminal it is possible to work around problems with Fusion drives and Boot Camp.
My solution was to start Boot Camp Assistant and select the third option on the first screen to remove the Boot Camp partition. Well at least that worked!!! So I'm back to ground zero!
For now I think I'll just surrender and wait for Apple to figure out how somebody, who doesn't want to dig deep into the bowels of Fusion drives via Terminal, can install Win 8.1 on a 3TB Fusion drive (or any Fusion Drive?).

Thanks Loner T for your response. I don't have any third party NFTS software. At this point I don't think it is worth the effort to attempt to do anything complicated.
I did take some screen grabs and photos as I went through the install for the fourth or fifth time.
1) Disk Utility before start:
2) Create the Windows partition:
3) Initial Windows partitions:
4) Windows message on why can't install
5) Hit the "Format" button, and get this confirmation:
6) Results in partition name getting wiped, and still no active "Next" button:
7) Still can't install Windows, hit "Show Details" and get this error message.
8) Another attempt to "Format" results in the same problem. Still can't install. Boot back into Yosemite. Here's what Disk Utility now shows -- an "untitled" NTFS volume:
Here's the finder window showing the "untitled" volume:
The NTFS partition is there, but the Win 8.1 installer can't use it. Yes, it makes no sense, but that's what is going on!
Here's info from Terminal on CS I see used here if it helps any:
iMac-Retina:~ victor$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         2.8 TB     disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
   4:       Microsoft Basic Data                         198.9 GB   disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS iMac Retina HD         *2.9 TB     disk2
                                 Logical Volume on disk0s2, disk1s2
                                 5A16E295-8476-4500-A588-7DE44FE207B4
                                 Unencrypted Fusion Drive
iMac-Retina:~ victor$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 26BFCEFD-67DB-4AAE-BA18-4CC5EC205697
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         2921855311872 B (2.9 TB)
    Free Space:   114688 B (114.7 KB)
    |
    +-< Physical Volume 88BDD48F-B9A0-42F9-A05A-26B828B211C9
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     120988852224 B (121.0 GB)
    |
    +-< Physical Volume BEDB41F3-F2BC-4F31-B08F-A4B3E476A153
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     2800866459648 B (2.8 TB)
    |
    +-> Logical Volume Family 536F7EC4-2FC3-4878-989E-233DF25AE1E7
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 5A16E295-8476-4500-A588-7DE44FE207B4
            Disk:                  disk2
            Status:                Online
            Size (Total):          2915999940608 B (2.9 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               iMac Retina HD
            Volume Name:           iMac Retina HD
            Content Hint:          Apple_HFS
iMac-Retina:~ victor$
Unless you see a simple solution, it's not worth the hassle at this point for me.
Thanks for your interest.

Parrallels or boot camp ?

Similar Messages

Maybe you are looking for