Parshing error from cl_crm_svy_dom
Hi Experts!!,
I am using class CL_CRM_SVY_DOM, i am getting parsing error from method "create_survey_dom".
my code as below for your reference.
Its littlebit urgent....
type-pools: SURVY.
data: lcl_dom type ref to CL_CRM_SVY_DOM.
class lCL_CRM_SVY_DOM definition
inheriting from CL_CRM_SVY_DOM_DEFINE
final
create public .
*"* public components of class CL_CRM_SVY_DOM
*"* do not include other source files here!!!
public section.
methods CONSTRUCTOR
importing
I_APPLICATION_ID type CRM_SVY_DB_APPL_ID
i_survey_id type string.
data: survey_xml type xstring.
endclass.
class lCL_CRM_SVY_DOM IMPLEMENTATION.
method: CONSTRUCTOR.
data: application type string,
survey type string.
move i_application_id to application.
move i_survey_id to survey.
call method super->constructor
exporting
i_application = application
i_service = survey.
*cleate xml for using dom tree
call method me->create_survey_dom
exporting
i_xml_xstring = survey_xml
exceptions
error_in_parsing = 1
others = 2.
break-point.
if sy-subrc <> 0.
message id sy-msgid type 'I' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
" raising error_in_parsing.
endif.
endmethod.
endclass.
data: oref type ref to lCL_CRM_SVY_DOM.
data: im_tree_tab type SURVY_T_DOM_TREE.
DATA: gr_document TYPE REF TO IF_IXML_DOCUMENT.
data: xml_table type wff_t_xml.
start-of-selection.
CREATE OBJECT oref
exporting
i_application_id = 'CRM_SURVEY_ACTIVITY' "application
i_survey_id = 'TEST FOR ACTIVITIES'.
hi
Use following code before
call method me->create_survey_dom
exporting
call method me->create_initial_survey_xml.
call method me->get_survey_xml
importing
e_xml_xstring = survey_xml.
Dont forget to reward if it is really needful to you.
Anee
Similar Messages
-
I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
BillI took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
> -
As soon as I login with iChat, I get an error from MobileMe!
Hey, I've had this issue for a while, and my work around for it was just not using iChat. However, I want to use iChat now so I need a proper resolution. Now I have mobile me with my [email protected] address, and I have my iChat account with [email protected] (created before my MM subscription).
When I log into iChat for the first time, within minutes I get an error from MobileMe saying "You've entered an incorrect password for MobileMe, please try again"... I didn't do anything though.
If I go to MobileMe in System Preferences, it says: "Your password has changed. Enter your new password.
If you have not changed (or reset) your password contact MobileMe support."
If I enter my password in and get that fixed, the next time I start up iChat it says: "Your login ID or password is incorrect"... soo I'm confused.
The password for my @me and @mac addresses are different, is it possible they are sharing the same keychain? I do have the check box ticked to remember the password.
Any idea's?Hi,
I would not repair at this time.
In the list of password you should find the one for iChat Or possibly several for iChat if you have different Account/Screen Names list by their Account names.
Double click on the one that is causing you issue.
In the new window that pops up put a tick in the Password Box. You will probably have to confirm with your Admin Password to Allow Once.
Does this show the right password ?
If not change the Password.
If it does then click the Access Tab and see if iChat is Allowed (Or Allow All is being used)
Either change to Allow All or add iChat to the List.
7:45 PM Saturday; April 3, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
How to get actual error from Crystal Report
We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in AdvanceSame as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek -
got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
RajHi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS. -
Smartform Printing : Error in spool C call: Error from TemSe
Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device ZEB10
Format ZTT Format
Doc. Category SMART
Recipient
Department
Deleted On 19.01.2011
Authorization
Output Attributes
No. of Copies 1
Priority 5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested 0
Processed 0 With Problem 0
With Error (Not Printed) 0
Storage Mode Print
TemSe Attributes
Object name SPOOL0000013836
Data type ????????????
Character set 0 -
> Character set of dev type = 1162
Number of parts 0
Record format
Size in bytes 0
Storage location
On seeing SP01
Spool no. Type Date Time Status Pages Title
13836 Smartforms(OTF) 11.01.2011 07:32 + 0 SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
ManasHi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K -
How to remove error from propagation and verify replication is ok?
Have a one-way schema level streams setup and the target DB is 3-node RAC (named PDAMLPR1). I run a large insert at source DB (35million rows). After committing on source, I made a failure test on the target DB by shutting down the entire database. The streams seems stopped as the heartbeat table sequence (it inserts a row each min) on target is still reflecting last night. We get the error in the dba_propagation:
ORA-02068: following severe error from PDAMLPR1
ORA-01033: ORACLE initialization or shutdown in progress
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7639
ORA-06512: at "SYS.DBMS_AQADM", line 631
ORA-06512: at line 1
08-FEB-10
while capture, propagation, and apply are all in enabled status. I restarted capture and propagation at source DB. But still see the error message above. My questions are:
1. How to delete the error from dba_propagation?
2. How to verify the streams is still running fine?
In normal test, during such large insert, the heartbeat table added a row in an hour. Very slow.
thanks for advice.Well, if I can give you my point of view: I think that 35 millions LCR is totally unreasonnable. Did you really post a huge insert of 35 millions then committed that single utterly huge transaction? Don't be surprised it's going to work very very hard for a while!
With a default setup, Oracle recommends to commit every 1000 LCR (row change).
There are ways to tune Streams for large transaction but I have not done so personnaly. Look on Metalink, you will find information about that (mostly documents id 335516.1, 365648.1 and 730036.1).
One more thing: you mentionned about a failure test. Your target database is RAC. Did you read about queue ownership? queue_to_queue propagation? You might have an issue related to that.
How did you setup your environment? Did you give enough streams_pool_size? You can watch V$STREAMS_POOL_ADVICE to check what Oracle think is good for your workload.
If you want to skip the transaction, you can remove the table rule or use the IGNORETRANSACTION apply parameter.
Hope it helps
Regards, -
Error while running ejbc. Fatal error from EJB Compiler ---- Error while pr
Hi!
I was deploying a test application for a session bean with sun 1 studio 5 and I started getting this message while deploying.
I had tested the bean previously and I had no problems.
I found this in the sun app server 7 release notes, but I don't understand what I'm supposed to do...
"Deployment of CMP beans fails.
The following error is thrown because there are no <query-params> entries in the container-managed persistence (CMP) bean in sun-ejb-jar.xml file:
Error while running ejbc. Fatal error from EJB Compiler ---- Error while processing CMP beans.
Solution
Even if it isn't necessary for the CMP beans, add the query-params tag for finders in the sun-ejb-jar.xml file with the empty parameters."
Here is my sun-ejb-jar.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 EJB 2.0//EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-ejb-jar_2_0-0.dtd">
<sun-ejb-jar>
<enterprise-beans>
<name>GestorDoBanco_EJBModule</name>
<ejb>
<ejb-name>Cliente</ejb-name>
<jndi-name>ejb/Cliente</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Cliente.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>ClienteAssociadoAConta</ejb-name>
<jndi-name>ejb/ClienteAssociadoAConta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/ClienteAssociadoAConta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Conta</ejb-name>
<jndi-name>ejb/Conta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Conta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>GestorDoBanco</ejb-name>
<jndi-name>ejb/GestorDoBanco</jndi-name>
<pass-by-reference>false</pass-by-reference>
</ejb>
<ejb>
<ejb-name>MensagemM003</ejb-name>
<jndi-name>ejb/MensagemM003</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM003Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM003Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012</ejb-name>
<jndi-name>ejb/MensagemM012</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM012Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM103</ejb-name>
<jndi-name>ejb/MensagemM103</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM103.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM112</ejb-name>
<jndi-name>ejb/MensagemM112</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM112.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Registo</ejb-name>
<jndi-name>ejb/Registo</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Registo.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoConfirmada</ejb-name>
<jndi-name>ejb/TransaccaoConfirmada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoConfirmada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoFinalizada</ejb-name>
<jndi-name>ejb/TransaccaoFinalizada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoFinalizada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoIniciada</ejb-name>
<jndi-name>ejb/TransaccaoIniciada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoIniciada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<pm-descriptors>
<pm-descriptor>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
<pm-class-generator>com.iplanet.ias.persistence.internal.ejb.ejbc.JDOCodeGenerator</pm-class-generator>
<pm-mapping-factory>com.iplanet.ias.cmp.NullFactory</pm-mapping-factory>
</pm-descriptor>
<pm-inuse>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
</pm-inuse>
</pm-descriptors>
<cmp-resource>
<jndi-name>mysqlpmanager</jndi-name>
<default-resource-principal>
<name>bes</name>
<password>besbes</password>
</default-resource-principal>
</cmp-resource>
</enterprise-beans>
</sun-ejb-jar>
Thanks in advance for any help.
Nunohttp://docs.sun.com/source/817-2175-10/decmp.html
Please go to the above docs and look thru the examples given in it.
Example 2
This query returns all products in a specified price range. It defines two query parameters which are the lower and upper bound for the price: double low, double high. The filter compares the query parameters with the price field:
"low < price && price < high"
The finder element of the sun-ejb-jar.xml file would look like this:
<finder>
<method-name>findInRange</method-name>
<query-params>double low, double high</query-params>
<query-filter>low < price && price <
high</query-filter
</finder>
I hope this hepls. In your case u just have to make it null. -
Need Help in expdp for resolving ORA-39127: unexpected error from call
Hi All,
My Environment is -------> Oracle 11g Database Release 1 On Windows 2003 Server SP2
Requirement is ------------> Data Pump Jobs to be completed without any error message.
I am tryring to take export data pump of a schema
Command Used --> expdp schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Export Log Show this details its completed with 2 error messages
Export: Release 11.1.0.6.0 - Production on Saturday, 23 April, 2011 13:31:10
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP option
FLASHBACK automatically enabled to preserve database integrity.
Starting "SYSTEM"."SYS_EXPORT_SCHEMA_01": system/******** schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 192 KB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',0,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',1,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980
. . exported "SCOTT"."DEPT" 5.945 KB 4 rows
. . exported "SCOTT"."EMP" 8.585 KB 14 rows
. . exported "SCOTT"."SALGRADE" 5.875 KB 5 rows
. . exported "SCOTT"."ACCTYPE_GL_MAS" 0 KB 0 rows
. . exported "SCOTT"."BONUS" 0 KB 0 rows
Master table "SYSTEM"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_SCHEMA_01 is:
D:\APP\ADMINISTRATOR\ADMIN\SIPDB\DPDUMP\SCORR.DMP
Job "SYSTEM"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 13:40:08
Please help me to resolve this issue.
Thank you,
ShanHi Shan,
I am getting very similar to yours
"ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found."
error message while creating OLAP Analytic Workspace with AWM.
I am creating workspace for the first time, actually following some tutorial to get some knowledge about OLAP)
I see you managed to solve you problem.
I wonder how I can get this MOS DOC 852794.1 - is it possible to get it without going to Metalink?
Thanks in advance for any help.
Regards,
SC -
Error 500--Internal Server Error From RFC 2068 Hypertext Transfer Protocol
We are encountering the following error while navigating the dashboards/ reports through OBIEE: "Error 500--Internal Server Error From RFC 2068 Hyperion Transfer Protocol"
While navigating from one dashboard page to another this error is encountered or we get kicked out of the session and need to log back in.
Any one experienced the same before?Thanks Srini.
They issue we are facing is not post-installation specific. The environment functions fine but when we navigate dashboard pages, then this error pops up. It is intermittent and applicable to certain dashboards and reports. Not sure if you have ever encountered the dashboard/ report design causing this?
Ganesh -
Transport error from dev to quality
HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
Start of subsequent processing ... 20100409231713
End of subsequent processing... 20100409231716
Thanks,
krantiStart of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
Start of subsequent processing ... 20091112090953
End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed -
"****Error from PSA****" error message when loading InfoCube
Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
MikiHi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye. -
Error in Action when CRM Order is updated as Error from R/3 update
Hi,
Currently we are in CRM 6.0 SP04 and R/3 4.7 SP14
Process:
1) B2B user places order through ISA
2) Order gets replicated R/3 from CRM through middleware (Scenario A setting)
3) If there are any changes in order on either side, changes gets replicated.
Requirement:
We have a requirement from business to trigger workflow in CRM if order is in error. Following are the possible scenarios
1) Error while saving order in CRM
2) No errors in CRM. However, Order will get error in R/3 because of inconsistent configuration or master data between CRM and R/3. The BDOC will be green while replicating to R/3 and acknowledgement to CRM.
3) BDOC status is in error
Solution approach:
We created an action to trigger event when order status set to "Contains error". The condition for Action trigger are Order have error free flag NE X(BUS 2000115 ) OR Status = I1030 OR status = I1056.
Issues:
1) Scenario : Order is successfully create in CRM without any error. Order gets replicated to R/3 u2013 BDOC is green. However, the order gets error status in R/3 because of inconsistent configuration or master data. The acknowledgement BDOC updates the error status in CRM. However, Action does not get trigger when the order is updated as Error from R/3.
Pls advise possible solution and also suggest any other way to achieve the required functionality to generate workflow for CRM order updated as Error from R/3.
Regards,
Anil RitheHi Anil,
Try this, implement ORDER_SAVE BAdI. This BAdI is triggered every time an order is saved, you could put in your logic to see if the order has errors, if yes trigger your workflow.
I haven't tested but this should work for your case when the crm order is set to error status after the replication to R/3(the BDOC scenario).
This may not be the most efficient method of doing, but this would definitely work.
Make sure you use proper checks at the beginning of your order_save BAdI implementation as this badi would get executed on save of every 1-order object.
~Kiran -
Error from the session log between Informatica and SAP BI
HI friends,
I am working extraction from bi by Informatica 8.6.1.
now, I start the process Chain from bi, and I got a error from Informatica's session log.Pls help me to figure out what's going on during me execution.
Severity Timestamp Node Thread Message Code Message
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6228 Writing session output to log file [D:\Informatica\PowerCenter8.6.1\server\infa_shared\SessLogs\s_taorh.log].
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6014 Initializing session [s_taorh] at [Fri Dec 17 11:01:31 2010].
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6683 Repository Name: [RepService_dcinfa01]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6684 Server Name: [IntService_dcinfa01]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6686 Folder: [xzTraining]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6685 Workflow: [wf_taorh] Run Instance Name: [] Run Id: [43]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6101 Mapping name: m_taorh.
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS.US]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6703 Session [s_taorh] is run by 32-bit Integration Service [node01_dcinfa01], version [8.6.1], build [1218].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24058 Running Partition Group [1].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24000 Parallel Pipeline Engine initializing.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24001 Parallel Pipeline Engine running.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24003 Initializing session run.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING CMN_1569 Server Mode: [UNICODE]
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING CMN_1570 Server Code page: [MS Windows Simplified Chinese, superset of GB 2312-80, EUC encoding]
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6151 The session sort order is [Binary].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6156 Using low precision processing.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6180 Deadlock retry logic will not be implemented.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING SDKS_38029 Loaded plug-in 300320: [PowerExchange for SAP BW - OHS reader plugin 8.6.1 build 183].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING SDKS_38024 Plug-in 300320 initialization complete.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING PCCL_97003 [WARNING] Real-time session is not enabled for source [AMGDSQ_IS_TAORH]. Real-time Flush Latency value must be 1 or higher for a session to run in real time.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING SDKS_38016 Reader SDK plug-in intialization complete.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6307 DTM error log disabled.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TE_7022 TShmWriter: Initialized
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6007 DTM initialized successfully for session [s_taorh]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR PETL_24033 All DTM Connection Info: [<NONE>].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24004 PETL_24004 Starting pre-session tasks. : (Fri Dec 17 11:01:31 2010)
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24027 PETL_24027 Pre-session task completed successfully. : (Fri Dec 17 11:01:31 2010)
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR PETL_24006 Starting data movement.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6660 Total Buffer Pool size is 1219648 bytes and Block size is 65536 bytes.
INFO 2010-12-17 11:01:31 node01_dcinfa01 READER_1_1_1 OHS_99013 [INFO] Partition 0: Connecting to SAP system with DESTINATION = sapbw, USER = taorh, CLIENT = 800, LANGUAGE = en
INFO 2010-12-17 11:01:32 node01_dcinfa01 READER_1_1_1 OHS_99016 [INFO] Partition 0: BW extraction for Request ID [163] has started.
Edited by: bi_tao on Dec 18, 2010 11:46 AMINFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8167 Start loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8168 End loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8141
Commit on end-of-data Fri Dec 17 11:01:32 2010
===================================================
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8143
Commit at end of Load Order Group Fri Dec 17 11:01:32 2010
===================================================
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8035 Load complete time: Fri Dec 17 11:01:32 2010
LOAD SUMMARY
============
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8043 ****END LOAD SESSION****
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8006 Writer run completed.
INFO 2010-12-17 11:01:33 node01_dcinfa01 MANAGER PETL_24031
RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [VENDOR] has completed. The total run time was insufficient for any meaningful statistics.
INFO 2010-12-17 11:01:33 node01_dcinfa01 MANAGER PETL_24005 PETL_24005 Starting post-session tasks. : (Fri Dec 17 11:01:33 2010)
INFO 2010-12-17 11:01:33 node01_dcinfa01 MANAGER PETL_24029 PETL_24029 Post-session task completed successfully. : (Fri Dec 17 11:01:33 2010)
INFO 2010-12-17 11:01:33 node01_dcinfa01 MAPPING SDKS_38025 Plug-in 300320 deinitialized and unloaded with status [-1].
INFO 2010-12-17 11:01:33 node01_dcinfa01 MAPPING SDKS_38018 Reader SDK plug-ins deinitialized with status [-1].
INFO 2010-12-17 11:01:33 node01_dcinfa01 MAPPING TM_6018 The session completed with [0] row transformation errors.
INFO 2010-12-17 11:01:33 node01_dcinfa01 MANAGER PETL_24002 Parallel Pipeline Engine finished.
INFO 2010-12-17 11:01:33 node01_dcinfa01 DIRECTOR PETL_24013 Session run completed with failure.
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6022
SESSION LOAD SUMMARY
================================================
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6252 Source Load Summary.
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR CMN_1537 Table: [AMGDSQ_IS_TAORH] (Instance Name: [AMGDSQ_IS_TAORH]) with group id[1] with view name [Group1]
Rows Output [0], Rows Affected [0], Rows Applied [0], Rows Rejected[0]
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6253 Target Load Summary.
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR CMN_1740 Table: [VENDOR] (Instance Name: [VENDOR])
Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6023
===================================================
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6020 Session [s_taorh] completed at [Fri Dec 17 11:01:33 2010]. -
Good Morning All,
One of our RMAN backups is failing with the following error message. Any suggestions would be greatly appreciated.
==================================================================================================
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Edited by: ORA_UMAIR on Dec 31, 2008 7:51 AMThis Oracle Database is 9.2.0.6.0. Here is the complete log file. The RMAN script that I am using ran successfully many times before.
====================================================================================================
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: CUSTPR (DBID=525071053)
RMAN>
RMAN> #########################################################################
2> # LEVEL 0 BACKUP #
3> #########################################################################
4>
5> # Configure backups to be written to disk.
6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
old RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Set the retention policy to a recovery window of 7 days. This ensures that
2> # RMAN retains all backups needed to recover the database to any point in time
3> # in the last 7 days. You can use the DELETE OBSOLETE command to delete
4> # backups that are no longer required by the retention policy. To exclude a
5> # backup from consideration by the policy, you can use KEEP option with the
6> # BACKUP command.
7> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to use two disk channels for backup, restore, recovery, and
2> # maintenance operations.
3> CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write disk backups to the /backup directory.
2> # The format specifier %t is replaced with a 4-byte timestamp, %s with the
3> # backup set number, and %p with the backup piece number.
4> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to back up the control file after each backup.
2> CONFIGURE CONTROLFILE AUTOBACKUP ON;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write controlfile autobackups to the /backup directory.
2> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Enable the backup optimization feature introduced in 9i to make sure that
2> # RMAN won't backup an archivelog or datafile if there already exists a backup
3> # of that file. The FORCE option can be used to override optimization on a
4> # specific BACKUP command.
5> CONFIGURE BACKUP OPTIMIZATION ON;
old RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Use the SHOW ALL command to see the current configuration settings.
2> SHOW ALL ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%d_bkp_cf%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' FORMAT '%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/orahome2/custprdb/9.2.0/dbs/snapcf_custpr.f'; # default
RMAN>
RMAN> # The following commands are run each day to start the backup cycle.
2> # The steps are:
3> # - Take an incremental level 0 backup of the database. A level 0 backup is
4> # a complete backup of the entire file which can be used as the basis
5> # for a subsequent incremental backup.
6> # - Backup all archivelogs that have not already been backed up.
7> # - Delete on-disk archivelogs older than seven days.
8>
9> BACKUP INCREMENTAL LEVEL 0 FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p'
10> DATABASE maxsetsize 33G
11> PLUS ARCHIVELOG FORMAT '/backups/admin/custpr/%d_bkp_al%t_Set%s_Piece%p'
12> delete all input;
Starting backup at 12/30/2008 22:01:40
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=8008 recid=7910 stamp=674638862
input archive log thread=1 sequence=8009 recid=7911 stamp=674671207
input archive log thread=1 sequence=8010 recid=7912 stamp=674697380
input archive log thread=1 sequence=8011 recid=7913 stamp=674780433
input archive log thread=1 sequence=8012 recid=7914 stamp=674784211
input archive log thread=1 sequence=8013 recid=7915 stamp=674863288
input archive log thread=1 sequence=8014 recid=7916 stamp=674863300
channel ORA_DISK_1: starting piece 1 at 12/30/2008 22:01:41
channel ORA_DISK_1: finished piece 1 at 12/30/2008 22:03:47
piece handle=/backups/admin/custpr/CUSTPR_bkp_al674863300_Set3083_Piece1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:02:07
channel ORA_DISK_1: deleting archive log(s)
archive log filename=/custpr/arch/arch_custpr_8008.log recid=7910 stamp=674638862
archive log filename=/custpr/arch/arch_custpr_8009.log recid=7911 stamp=674671207
archive log filename=/custpr/arch/arch_custpr_8010.log recid=7912 stamp=674697380
archive log filename=/custpr/arch/arch_custpr_8011.log recid=7913 stamp=674780433
archive log filename=/custpr/arch/arch_custpr_8012.log recid=7914 stamp=674784211
archive log filename=/custpr/arch/arch_custpr_8013.log recid=7915 stamp=674863288
archive log filename=/custpr/arch/arch_custpr_8014.log recid=7916 stamp=674863300
Finished backup at 12/30/2008 22:03:47
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Recovery Manager complete.
Maybe you are looking for
-
Plese a have this message warning
i have this message "A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service" my pc is a toshiba satellite C660D - 1D3
-
I would like to fill an address area with the same information that has already been entered as "sold to" when the "Yes" button is selected for "is the ship to the same as the sold to"?
-
Sneak Preview Java SP07 Installation problem at step 32
I am trying to install the current version of Java version Sneak Preview SP07. At step 32 of 32 the system hangs. I am using windows xp and new hard drive. I have 1.4.2.09 java version. can anyone advise why this is happening? Your help will be appre
-
Sync merges ALL my contact groups onto iPhone
I have my Outlook set up with 4 sets of contacts. The main one that I use at my desktop everyday is just called Contacts, but I have 3 other groups with different names. What they share is that I rarely need to use them. They are either specific to a
-
Audio editing across tracks after OMF/AAF import problems
Hi there, I'm having difficulty getting my head around the way STP handles multiple-mono audio files. I'm lucky enough in my job to have a choice of audio editing tools for what I'm working on. For speech I use SADiE, for more complex projects invo