Part 1 generated while creating migo but display mode Excise tab not appear

Hi
I created migo Part 1 generated. and excise tab also appeared.
but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
Please explain What could be the reason
Regards
sitaram

Hi
Please any body give me valuable suggesition.
Thanks and regards
sitaram

Similar Messages

Excise Tab not appearing in MIGO Screen

Excise Tab not appearing in MIGO Screen
Reg
Sunil

Hi,
For GR, which movement type you are using...?
If it is 103, you will get the excise invoice tab only in 105 GR.
If it is 101 only, check the following configuration.
SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
Please revert for further analysis.
Regards,
Siva

Excise Tab not appearing in MIGO Screen but getting posted with EI Entry

Hi ,
I am excuting CIN ......While doing MIGO, Excise tab is not apearing nowhere in the MIGO screen but entries are being created successfuly in MIRO and posted as well, Entries ....
                                                       GR/IR Clearing A/c Dr
                                                       RG 23 BED A/c      Dr
                                                       RG 23 Ecess A/c Dr
                                                       RG 23 SHEcess A/c Dr
                                                       Vendor A/c Cr
Can any one help me and provide solution for this.
Thanks
Sukant

HI,
Check your excise group settings, in it check migo settings.
You need to mark tick in all boxes
EI capture
Post EI in MIGO
Duty differenc at GR
EI create/RG23D selection
Update RG1at MIGO
Also check in J1ID trax for the Po material chapter id is maintained.
Regards
KK

Excise tab not appearing in GR display

Hi,
After creating the Goods reciept, when we display the GR document the excise tab is not appearing. While creating only the excise tab appears and can enter all the excise details. But if want check the values entered in the display mode of the GR, we tab does not appear.
Please let me know if any customising setting needs to be done so that this tab will appear in display mode also. We are on ECC 6
Thanks,
SR

Hi,
As per my understanding ......
While Doing MIGO, Excise Tab appear at header level in Excise Tab and also at Item Level.
But when u post part1 only, then Excise Entries also found there.
But after posting Part1 in MIGO and Part2 in J1IEX,
while going to back MIGO Document, Exicse Does not appear there becoz u post only part1 not part2.
u can observe there entries like this
During GR
                                    Material Stock            Dr.
                                    GR/IR clearing                        Cr.
During Excise Invoice Credit
                                    Cenvat Account          Dr.
                                    Cenvat Clearing                     Cr.
Hope Clear U !
Regards,
Pardeep Malik

Excise tab not appearing in MIGO

Dear All,
We have some issue in MIGO.
We have imported a material against a PO and the MIRO is done for customs duty.
But at the time of doing MIGO customs duty is not capturing.
The PO is issue to cost center PO and there is no item no for the PO item.
Kindly give some suggestion for the same.
Regards,
Mullairaja

>
MullaiRaja wrote:
> Dear All,
>
> We have some issue in MIGO.
>
> We have imported a material against a PO and the MIRO is done for customs duty.
>
> But at the time of doing MIGO customs duty is not capturing.
>
> The PO is issue to cost center PO and there is no item no for the PO item.
>
> Kindly give some suggestion for the same.
>
> Regards,
> Mullairaja
While doing MIGO,enter purchase order no.,press enter,Enter correct commerical inv. no & year then
enter gr qty,tick item ok,press enter,excise tab appears. See customs duties were flowing.
Hope it solves problem.

Missing Parts List While creating Prd. Order

Hi Friends,
My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
I Tried To Get This From the Following Method
Checked For Define checking control In OPJK.
Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
a) Removed tick mark in No Availability check.
b) Type of component check Given as - ATP check.
c) Material release - 1. User decides on release if parts are missing.
d) PP Checking rule (Which Is same As with plant parameter OPPQ)
e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
Then Assigned the availability checking group at Mrp View of Header material.
In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
*Please Suggestu2026u2026u2026u2026*
hari

Hi,
Please check same checking rule use in Material master and with order type and plant?
Check the cheking group in material master MRP3 view for all material.
Go to Transection OPJJ - Maintain scope of check,
Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
(1). CO24- Missing Parts Information System
Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
(2). COOIS : Production Order Information System
Under this transaction you need to Select in List option as Components and then go on Selection Tab.
For collective availability check use
COHV - Excute the roport w ith collective avaliabilty check.
COMAC.
Hope this help.
Regards,
R.Brahmankar

Erro while creating MIGO - Update terminate

Hello All,
While creating MIGO with ref to PO i am getting the following error
Update was terminated
System ID....   SAN
Client.......   120
User.....   PURCHASE1
Transaction..   MIGO
Update key...   5756D3E59A5B420DAA800130EFC8ECAC
generated....   22.09.2009, 11:42:18
completed....   22.09.2009, 11:42:20
Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC\
Can any one help me,
thanks & Regards,
Abhinay Waikar.

HI i checked with number range in material document its ok.
Can any one explain me how intervals works for phys inventory document
SPRO-MMinvent--Number range for mtl & physical inv document.
When i try to post migo doc here the number coming by the interval of 10
How can any one explain me.
Abhinay
Edited by: Abhinay Waikar on Sep 23, 2009 2:28 PM
Edited by: Abhinay Waikar on Sep 23, 2009 2:37 PM

Display Both Excise Tab And Customized Tab in MIGO header screen

I want to display both Excise tab and My customized tab in header screen in MIGO..But I have seen at a time one tab is displaying.Can anybody tell me
how I want to diplay both tab at a time??

Hi DEBDATTA PANDA,
In MIGO - Excise tab is showing as a part of customization. In PO if tax values are available that values will show in migo(drop down will show capture/refer /capture+post few more ) under excise tab.
pre req. is mat + Vendor +plant need to be excisable .
Now on your Customized tab is purely a Z development.only you can tell .
Also , if you are not seeing excise tab in migo , it means either config or master data missing for material code , Vendor, Plant
regards
manu

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Config.sh-Admin server directory is created..but manged soa server is not

Hi,
I have installed weblogic and then soa 11g,nowe creating domain using config.sh on shared storage.
@ nodes and binaries are shared for both the nodes(all installation binaries are shared on a common location which is in turn mounted on both nodes).
After running config.sh ,
it says installation sucessful howevr Admin server directory is created..but manged soa server is not getting created.
Plz any body suggest some resolution..vvvv urgent..
Cheers,
Arshi

Hi Arshi,
Start the Admin server and then managed servers and directory should get created.
Regards,
Anuj

Excise Invoice tab not appearing in MIGO

Hi all,
While doing MIGO, we only capture Excise Invoice and Part I is updated. We avail Cenvat thru J1IEX and update Part II separately. We could process both these transactions but after posting, when we display the GR, we can not see the Excise Invoice Tab and Excise item though entries have been posted.
Can anybody suggest how can we bring this tab in GR display
Bhaven Selarka

Hi,
1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
2)If you are following TAXINN,Then u should maintain Tax code to Company code.
If u are Using TAXINJ,U should maintain Excise Defaults.
3)In Excise Group,U should Activate MIGO transactions.
4)Check ur TAX code,Tax code is Deductable or non dedctable.
Raghu

STO - Excise tab not getting displayed in material document after posting.

Dear all,
We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
It is plant to plant stock transfer with excise, the process that we are following as given below:
1) STO PO - ME21N
2) Outbound delivery - VL10B - Post PGI in VL02N
3) Outgoing excise invoice - J1IIN - With the key DLFC.
4) GR - MIGO with excise invoice capture.
During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
Request to please do let us know if we have missed out on any configuration or master data.
Regards,
mahesh.

Hi,
Do the all customization setting for CIN for reference check the following link for India. and Material management
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
You have to maintain Excise master data for material,vendor and PLant in J1ID .
reward if helpful,

Excise tab not open in MIGO

Dear Experts,
We have create new plant with reference to our existing plant, all testing done except MIGO.
At the time MIGO excise tab not open in case of excisesable material, we have already update ch id, Cenvat determination & Vendor excise details in J1ID
Please help
Regards
BK GAIKWAD

Hi,
Check "Duty different at GR" check box selected or not in MIGO Setting segment in Maintaining Excise Group setting in following path( if not just select the check box)
SPRO ->>Logistics general ->> tax on Goods Movements-->>India -->> Basic setting -->>Maintain Excise Groups
Also check in above path the Excise Reg. is there in Excise Groups Segment.
For your new plant check Excise Reg. number is assigned in following path in Maintaining Plant Settings
SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Plant Settings
Regards,
Biju K

HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

Hi,
I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
Is there a way to make the iPhone try to open the login page?
Ben.

I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
But, sometimes it works the first time or suddenly for no reason.
Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

I upgraded to iTunes 11.0. My iPod Nano 4th Version will sync, but music and playlists will not appear to manage and add more songs. Is there a fix?

I upgraded to iTunes 11.0. My iPod Nano 4th Version will sync, but music and playlists will not appear to manage and add more songs. Is there a fix?

If I go from 'Devices' to Summary and then Music, I only get one option-Sync Music,There is a box on this page but the options within it are grayed out. If I tick the Sync Music option I get this message-
'Are you sure you want to remove existing music,films,ect, from this ipod and sync with this itunes library?
'Music synced to (my ipods name) from other itunes libraries will be removed and items will be synced from this itunes library' I have only ever used itunes on this PC and the 'Manually manage music and videos' is ticked but
that must be a default setting as I haven't ticked it.

Part 1 generated while creating migo but display mode Excise tab not appear

Similar Messages

Maybe you are looking for