Part 1: Instrument Not Found

Hi
At start up I get this message. In three songs actually.
I don´t seem to miss any instruments in the songs.
What is it?
JanD

Did you ever install a demo instrument?
It might be in your audio environment somewhere
Look at the audio config page and see if there is an old plug in somewhere, probably greyed out.
Dual2.0 ghz G5 & 2ghz iMac G5   Mac OS X (10.4.5)  

Similar Messages

  • Instrument not found

    Hi
    I have a project which I have just moved from an external hard drive into my laptop. I saved it as a new project but copied all the audio and samples folders from the original folder.
    Now when I load the project it says 'instrument not found' for all the EXSp24 instruments, even though they are all copied in my EXS library, and in the sample instrument folder of the song.
    It only loads the song properly if I leave the old external hard drive plugged in, which I don't want to do. How can I tell Logic to look elsewhere for these instruments?
    Thankyou!
    Hx

    I have a similar problem, after I repaired the directory of a disk that contained all my user EXS sample libraries now Logic Pro 7 doesn't see the sampler instruments. Even though the sample instruments are in the right folder and the EXS samples were in the same place. When I refresh the menu in an EXS instance loaded it still can't find them.
    Help!

  • Third party EXS-instruments not found in LP9 after downloading.

    Hi.
    I have downloaded some EXS-instruments that i found online for free. I stored them along with the original EXS-instruments that came with LP9. When i try to load them in LP I get a pop-up saying the instrument was not found. I have refreshed the library, restarted the mac without result. Why is this?
    Thx, Elias

    Read the Logic Studio Instruments manual available in the Help menu.
    Specificially, the section on loading instruments.  It spells out the storage locations.  There's a main LIbrary on the Mac HD, and a user Library.
    The factory instruments are in the main Library (similar to the path above but starting with the Mac HD vs user).
    User instruments go into the user Library.

  • Library instruments not found in Logic Express 9

    Hi, some of the instruments listed in the library in Logic Express 9 can not be found.
    See e.g.:
    This happens also to other instruments from the library although these were all installed with the Logic Express software.
    Can you help please?
    Thanks a lot,
    Niels.

    this will helpmate http://logicprostudio.blogspot.com

  • G4 dual Logic Updated to 7.2.3 Exs Instruments not found!

    I have a G4 dual , with OS 10.4.8 and I just updated to Logic 7.2.3 and now when I do the Expanded scan or try to get my computer to recognize my Exs24 instruments nothing happen, its searched i tried selecting folders, its searches but its says 0 found instruments....!
    I have all my Exs stuff on an external drive and I made alias's of the exs and the sampler instrument folders and placed them in the main library, in the app support, in the logic folder is where i put the alias's. Then i went into logic, project manager and did and expanded scan...nothing. Whats up!!? I really need to figure this out asap.
    thanks in advance,
    Jonathan
    G4 Dual   Mac OS X (10.4.8)   Logic 7.2.3

    hi xs4is, thanks for the reply
    No, that's not the problem, I mean it installs perfectly from the DVD -- no errors, no indication of any problems whatsoever, however when I double click the app to start logic up, instead of starting up I get the error message: The Application Logic Pro has unexpectedly quit. What would you like to do: Close, Reopen, blah blah, not even a splash screen shows up. nothing. I am using Onyx on a regular basis and have been running all cleanup and optimization scripts in it. didn't help at all. And I really don't want to create a second user on my machine -- it's only my machine, nobody else uses it, and I have only had problems with multipe users in the past (especially with authorizations and stuff), but I also don't think it has anything to do with accounts
    Message was edited by: phile

  • Content Search Web Part Error / Control_list.js not found

    Hello,
    I am trying to use the Content Search Web Part but I receive an error:
    Display Error: The display template had an error. You can correct it by fixin the template or by changing the display template used in either the Web Part properties or Result Types;
    Template '~sitecollection/_catalog/masterpage/Display Templates/Content Web Parts/Control_List.js not found or has syntax errors. (Load Template;)
    I am working on a fresh installation (out of the box) Sharepoint 2013 SP1 on which I have applied the latest CU.
    I have checked the folder and I only have one file 'Group_Content.js'. I searched over the web and I found out that I am missing a lot of file in that folder.
    Anybody can help me solve this without re-installation of SP?
    Thank you!

    Yep you are missing a lot of display templates if you only have the one.
    Is this the root site collection or a new site-collection under /sites? If it's the root site collection, then I would suggest creating a new web application and site collection and seeing if the problem exists in that. If it does, then you may need to repair/rebuild
    your SharePoint installation.
    If it's a sub-site-collection and the root site doesn't have that problem, try creating a new site-collection and testing in that. Also ensure that you have publishing features enabled in the site collection.
    Paul.
    Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

  • EXS 'Not found ' errors

    Cheers Logic-aires,
    Can anyone confirm if there is a fix for the EXS24 issue concerning samples/instruments 'Not found' messages that now plague this soft sampler in LP9?
    Boe

    iv done something a few times or so which i worked when the EXS mysteriously suddenly couldnt find the samples which were there every other time before..... maybe i was just lucky and im still on L8 & Leopard though give it a try.
    All my user EXS libraries are on an external and when they couldnt be found i deleted the alias and dragged the original back to Mac HD/Users/Library/Logic/Application Support/Sampler Instruments.
    then i open up logic and the EXS. Refresh menu and it found them. then i dragged them back to my external, delete the copy in the default location,option command and drag an alias back to default Mac HD/Users etc...
    Refresh ( maybe i cleared the instrument) and they have all still been found ever since.
    If they were in the default i think i dragged them out onto desk top and then moved them back.
    this was about 4 months ago but that was more or less it unless it was witch craft

  • Cannot create mysites from powershell: Original XSLT List View Web Part not found

    I have a bizarre problem in my SharePoint 2013 farm. This does not occur in my test farm, only in the farm we were going to go live with.
    I'm on windows Server 2012, SQLServer 2012 SP1, SharePoint 2013 April CU. 1 appserver/centraladmin server, 2 web servers.
    When I log into our mysitehost and click newsfeed, it will create a mysite (even though first it displays "we are sorry there was a problem creating your site")
    But from powershell, whether I use $UserProfile.CreatePersonalSite() or New-SPSite, I get the following error:
    Original XSLT List View Web Part not found
    So far I've only found one other person with this:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2503e42c-e114-4e89-8e00-89fe70f0b154/cannot-create-sharepoint-mysite-programmatically
    This is a brand new farm, created with the same scripts I created my test farm with, and same version of SharePoint. Only the service accounts are different. (Farm account has admin on the servers right now since I was setting up profile service).
    Some other errors from the same correlation ID that look related:
    It can't seem to find the listemplate 101
    And something looks wrong with the MySiteDocumentLibrary feature
    I have tried the following:
    1. run psconfig.exe on each server
    2. install-spfeature -AllExistingFeatures
    3. looped through the directory under Features and for each called Install-SPFeature $dirname -Force
    4. uninstalled and reinstalled MySiteDocumentLibrary feature
    5. blew away the whole farm (removed all servers from farm, deleted all databases) and recreated it.
    6. tried creating the UPA from the CentralAdmin gui.
    The only real difference I can think of between the working farm and non working farm is, I installed the working farm using RTM, then as they came out added the March PU and April CU. For this farm I installed RTM and March and April, and then ran my build
    farm script.
    I am at a loss. What do I need to do, re-install the binaries? That's all I can think of. What I love is that our test / POC system worked fine, and now 2 weeks before go-live I'm seeing errors on the production servers I've never seen before. Using the
    same scripts no less.
    Feature Activation: Feature 'Fields' (ID: 'ca7bd552-10b1-4563-85b9-5ed1d39c962a') was activated
    Feature Activation: Feature 'CTypes' (ID: '695b6570-a48b-4a8e-8ea5-26ea7fc1d162') was activated
    No document templates uploaded for list "$Resources:core,global_onet_solutiongallery_list;" -- none found for list template "100"
    Failed to find <ListTemplate> tag corresponding to ID "101", tried both onet.xml for site definition ID "0" language "1033" and global site definition. Operation failed.
    No document templates uploaded for list "$Resources:core,stylelibraryList;" -- none found for list template "121".
    System.Runtime.InteropServices.COMException: A user may not remove his or her own account from a site collection.<nativehr>0x81020051</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPUserCollection.UpdateMembers
    Feature Activation: Feature 'MySitePersonalSite' (ID: 'f661430e-c155-438e-a7c6-c68648f1b119') was activated
    Feature Activation: Activating Feature 'MySiteDocumentLibrary'
    Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'MySiteDocumentLibrary'
    SharePoint Foundation Upgrade MySiteDocumentLibraryFeatureReceiveraj08n INFO Creating new My Documents library
    Unknown SPRequest error occurred. More information: 0x80070002
    SPRequest.GetMetadataForUrl: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://contoso/personal/cbuchholz/DOCUMENTS ,METADATAFLAGS=59
    System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPWeb.GetObjectForUrl at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.GetSPObjectFromUrl ...
    <nativehr>0x80070002</nativehr><nativestack></nativestack>There is no Web named "/personal/cbuchholz/DOCUMENTS"
    Possible mismatch between the reported error with code = 0x81070504 and message: "There is no Web named "/personal/cbuchholz/DOCUMENTS"." and the returned error with code 0x80070002.
    Attemping to add webpart id 0F6072F2-E804-4CFD-837E-BB37332B9D1C to web http://contoso/personal/cbuchholz
    Adding XsltListViewWebPart calling SPRequest::CreateListViewPart. Web part id 0F6072F2-E804-4CFD-837E-BB37332B9D1C, web http://contoso/personal/cbuchholz
    Feature receiver assembly 'Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c', class 'Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryFeatureReceiver', method 'FeatureActivated' for feature 'e9c0ff81-d821-4771-8b4c-246aa7e5e9eb' threw an exception: System.InvalidOperationException: Original XSLT List View Web Part not found at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.ReplaceListViewWebPart
    Feature Activation: Threw an exception, attempting to roll back. Feature 'MySiteDocumentLibrary'
    Exception in EnsureFeaturesActivatedAtSite: System.InvalidOperationException: Original XSLT List View Web Part not found
    Failed to activate site-collection-scoped features for template 'SPSPERS#2' in site collection 'http://contoso/personal/cbuchholz'
    Failed to apply template "SPSPERS#2" to web at URL "http://contoso/personal/cbuchholz
    I've had other problems in this farm: the bug where when you add Administrators to a Search Service via the Manage Service Applications page, it removes the SPSearchDBAdmin role from the search service process account. That one did not happen in the other farm.
    At least other people have that one and I could just use the farm admin instead (still troublng of course).

    Ok,
    Here is the problem:
    When creating a mysite from powershell or script, apparently you can ONLY do this from a wfe (or a server running Microsoft SharePoint Foundation Web Application in services on server).
    You CANNOT create mysites from script on your appserver if it is not also a Web Application Server. I confirmed the same is true in my test farm. I guess I was always running most of these scripts on the webserver.
    I searched all over and cannot find this documented anywhere.
    Who do I contact to have Microsoft document this?
    It's Thursday morning, I've been working non stop since Saturday morning so you don't have to :)

  • Config sync:error: Folder is no longer part of the system data source or the folder not found

    This is the message I am getting when i try to configure synchronization through intellisync in all functions.  Any ideas?
    Folder is no longer part of the system data source or the folder not found
    JT

    jtwilcox wrote:
    Mail account is MAPI
    XP
    Outlook 2007
    thanks for your help so far!
    JT
    Hi...
    Based upon the folder error, my guess is the Desktop Manager is having difficulty determining your default mail client. I am not sure why but it is easy enough to redo a profile in Outlook just to test this. (Control Panel / Mail)
    Of course, I would backup my PST file prior to doing this and then create a new profile and import the PST file into the new profile. Once the profile is running and tested ok, I would again go to the Control Panel / Mail and set the default profile to point to the newly created profile. Then run the Desktop Manager and see what happens....
    H.
    +++++++++++++++++++++++++++++++++++++++++++++++++
    If successful in helping you, please give me kudos in my post.
    Please mark the post that solved it for you!
    Thank you!
    Best Regards
    hmeister

  • Getting a file not found error with jam pack instruments

    Since Logic Express no longer works with the current Mac OS X versions, I'm trying to get used to using GarageBand again while I save up to buy the full Logic Package.  I had purchased all of the jam packs years ago and recently also purchased Main Stage.  Now, when I go to use, for example, an instrument from the Orchestral jam pack, I get a message saying "EXS24 instrument “Cellos.exs”: Audio file “VC-L_legato_f_C2.wav” not found!" with the option to continue or search again.  Clicking "search again" always ends up with the same message.  This is driving me nuts!  Pretty ****** off right now that I can't use what I paid money for.  Isn't this stuff supposed to "just work"?  Or did that die with Steve Jobs?

    same Problem: Working with OS X 10.6.8 on a MacBookPro Santa Rosa and Logic Pro: Its not possible to use the cello.exs 'cos missing audio file “VC-L_legato_f_C2.wav”, same problem with Basses.exs (missing KB-L_legato_f_A#1.wav) and the  Piano. All this broken Instruments are from the Jam pack Orchestra Library.

  • Public part not found

    Hi all,
    I have created webdynpro dc B which uses webdynpro dc A
    When i build dc B it say public part not found. but i have varified that a jar of the public part is genrated in the DC A.
    I have noticed that when i compile DC A it gives following warning message in the build log
    [dcmake] All used DCs are available locally
              [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/cmi"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/ddicruntime"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/metamodel/content"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wd/webdynpro"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/logging"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wdp/metamodel/content"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.util.misc"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.exception"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.mw.jco"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/mail"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/IAIKSecurity"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/activation"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/webservices"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/webservices_lib"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/sapxmltoolkit"
              [dcmake] DC model check OK
    Start build plugin:
              [dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
              [dcmake] starting build plugin from : C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\
    Build plugin WebdynproPlugin
    Building development component 'dc/wd_xcs', vendor 'chevron', type 'Web Dynpro'
             software component 'CVX_COSTCENTER', vendor 'chevron'.
             location 'PDI_TRCCST_D'.
             source code location 'http://cpafisp5.chvpk.chevrontexaco.net:51100/dtr/ws/TRCCST/chevron_CVX_COSTCENTER/dev/inactive/'.
    Starting build (wrapped)
    Creating Ant build file..
    Using velocity macro file: C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\macros\build.vm
    Creating Ant build file C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\logs\build.xml
    Ant build file created in 1 second
    Starting Ant with build file C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\logs\build.xml, target build
    Using temporary directory C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A
    Ant build started at 2006-01-10 22:30:02 GMT+05:30 (IST)
    prepare:
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\deploy
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\gwd\packages
    gen:
         [ddgen]
         [ddgen] [Info]    Property deployment is true: Deployment information is provided!
         [ddgen] [Info]    Property sourcepath: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\src/packages
         [ddgen] [Info]    Property targetpath: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A/gdd
         [ddgen] [Info]    Property archivename: chevrondcwd_xcs
         [ddgen] [Info]    Property vendor: chevron
         [ddgen] [Info]    Property dcname: dc/wd_xcs
         [ddgen] [Info]    Property language: Available languages are automatically determined!
         [ddgen] [Info]    Property addpaths ...
         [ddgen] [Info]       SapMetamodelDictionaryContent.zip - C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/bi/mm/_comp/gen/default/public/def/lib/model
         [ddgen] [Info]       SapMetamodelWebdynproContent.zip - C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/bi/mm/_comp/gen/default/public/def/lib/model
         [ddgen] [Info]       SapMetamodelWebdynproContent.zip - C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       SapMetamodelDictionaryContent.zip - C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]    Destination directory C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\gdd does not exist
         [ddgen] [Info]    Destination directory C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\gdd is created
         [ddgen] [Info]    Initialize generation templates from configuration jar:file:/C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/bi/dict/_comp/gen/default/public/def/lib/java/SapDictionaryGenerationCore.jar!/DictionaryGenerationConfigurationCompiled.xml
         [ddgen] [Info]    Generating dbtables/sdmDeployDd.xml
         [ddgen] [Info]    Generation finished (0 seconds)
         [ddgen]
         [wdgen]
         [wdgen] [Info]    Property deployment is true: Deployment information is provided!
         [wdgen] [Info]    Property sourcepath: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\src/packages
         [wdgen] [Info]    Property targetpath: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A/gwd
         [wdgen] [Info]    Property archivename: chevrondcwd_xcs
         [wdgen] [Info]    Property vendor: chevron
         [wdgen] [Info]    Property dcname: dc/wd_xcs
         [wdgen] [Info]    Property language: Available languages are automatically determined!
         [wdgen] [Info]    Property addpaths ...
         [wdgen] [Info]       SapMetamodelDictionaryContent.zip - C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/bi/mm/_comp/gen/default/public/def/lib/model
         [wdgen] [Info]       SapMetamodelWebdynproContent.zip - C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/bi/mm/_comp/gen/default/public/def/lib/model
         [wdgen] [Info]       SapMetamodelWebdynproContent.zip - C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       SapMetamodelDictionaryContent.zip - C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]    Initialize generation templates from configuration jar:file:/C:/Documents and Settings/divy/.dtc/1/DCs/sap.com/tc/bi/wd/_comp/gen/default/public/def/lib/java/SapWebDynproGenerationCore.jar!/WebDynproGenerationConfigurationCompiled.xml
         [wdgen] [Info]    com.chevron.wd_xcs.comp.EmptyView2 --> TransparentContainer RootUIElementContainer [Children]: Container does not contain children
         [wdgen] [Info]    com.chevron.wd_xcs.comp.EmptyView1 --> TransparentContainer RootUIElementContainer [Children]: Container does not contain children
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateListView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/ListView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalListView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateEmptyView2.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/EmptyView2.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalEmptyView2.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPublicXi_ccsComp.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateXi_ccsComp.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/Xi_ccsComp.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalXi_ccsComp.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateMainView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/MainView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalMainView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateEmptyView1.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/EmptyView1.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalEmptyView1.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateDetailView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/DetailView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalDetailView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPublicXiCCSModelCust.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateXiCCSModelCust.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/XiCCSModelCust.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalXiCCSModelCust.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivate_MainViewSet_Xi_ccsComp_Xi_ccsComp.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/_MainViewSet_Xi_ccsComp_Xi_ccsComp.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/Internal_MainViewSet_Xi_ccsComp_Xi_ccsComp.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPublicXi_ccsCompInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IExternalXi_ccsCompInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateXi_ccsCompInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/Xi_ccsCompInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalXi_ccsCompInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/Xi_ccsCompInterfaceCfg.wdcontroller
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPublicXi_ccsCompInterfaceView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateXi_ccsCompInterfaceView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/Xi_ccsCompInterfaceView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalXi_ccsCompInterfaceView.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPublicXi_ccsCompInterface.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IExternalXi_ccsCompInterface.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IPrivateXi_ccsCompInterface.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/Xi_ccsCompInterface.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/InternalXi_ccsCompInterface.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/Xi_ccsCompInterface.wdcontroller
           [Ant] [Info] removed internal mapping between //WebDynpro/Controller:com.chevron.wd_xcs.comp.Xi_ccsCompInterface/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:Response/ChildNode:Result/ChildNode:ccList and //WebDynpro/Controller:com.chevron.wd_xcs.comp.XiCCSModelCust/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:Response/ChildNode:Result/ChildNode:ccList
           [Ant] [Info] removed internal mapping between //WebDynpro/Controller:com.chevron.wd_xcs.comp.Xi_ccsCompInterface/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:Response/ChildNode:Result/ChildNode:ccDetail and //WebDynpro/Controller:com.chevron.wd_xcs.comp.XiCCSModelCust/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:Response/ChildNode:Result/ChildNode:ccDetail
           [Ant] [Info] removed internal mapping between //WebDynpro/Controller:com.chevron.wd_xcs.comp.Xi_ccsCompInterface/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:Response/ChildNode:Result and //WebDynpro/Controller:com.chevron.wd_xcs.comp.XiCCSModelCust/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:Response/ChildNode:Result
           [Ant] [Info] removed internal mapping between //WebDynpro/Controller:com.chevron.wd_xcs.comp.Xi_ccsCompInterface/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:Response and //WebDynpro/Controller:com.chevron.wd_xcs.comp.XiCCSModelCust/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:Response
           [Ant] [Info] removed internal mapping between //WebDynpro/Controller:com.chevron.wd_xcs.comp.Xi_ccsCompInterface/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:CVXSAMST_SearchInput/ChildNode:input and //WebDynpro/Controller:com.chevron.wd_xcs.comp.XiCCSModelCust/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:CVXSAMST_SearchInput/ChildNode:input
           [Ant] [Info] removed internal mapping between //WebDynpro/Controller:com.chevron.wd_xcs.comp.Xi_ccsCompInterface/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:CVXSAMST_SearchInput and //WebDynpro/Controller:com.chevron.wd_xcs.comp.XiCCSModelCust/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch/ChildNode:CVXSAMST_SearchInput
           [Ant] [Info] removed internal mapping between //WebDynpro/Controller:com.chevron.wd_xcs.comp.Xi_ccsCompInterface/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch and //WebDynpro/Controller:com.chevron.wd_xcs.comp.XiCCSModelCust/Context/ChildNode:Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch
           [Ant] [Info] removing usage of controller //WebDynpro/Controller:com.chevron.wd_xcs.comp.XiCCSModelCust
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/IMessageXi_ccsComp.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/models/XcsModel.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/models/ComplexType_CVXSADTY_CCList.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/models/ComplexType_CVXSADTY_CCSearchInput.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/models/ComplexType_CVXSADTY_SearchOutput.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/models/ComplexType_CVXSADTY_SearchInput.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/models/ComplexType_CVXSADTY_CCDetail.java
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/models/Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch.java
           [Ant] getParameterStringForWSInvoke:modelclassname=Request_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch
           [Ant] getParameterStringForWSInvoke:modeltype=Request
           [Ant] getParameterStringForWSInvoke:modeltype=CVXSAMST_SearchInput
           [Ant] getParameterStringForWSInvoke:result=this.CVXSAMST_SearchInput.getOriginalBean()
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/models/Response_CVXSAMSI_CCSearch_CVXSAMSI_CCSearch.java
         [wdgen] [Info]    Generating configuration/Components/com.chevron.wd_xcs.comp.Xi_ccsComp/Xi_ccsComp.xml
         [wdgen] [Info]    Generating packages/com/chevron/wd_xcs/comp/wdp/ResourceXi_ccsComp.properties
         [wdgen] [Info]    Generating configuration/Applications/com.chevron.wd_xcs.applications.Xi_CCSApp/Xi_CCSApp.xml
         [wdgen] [Info]    Generating portalapp.xml
         [wdgen] [Info]    Generating wd.xml
         [wdgen] [Info]    Generating application.xml
         [wdgen] [Info]    Generating application-j2ee-engine.xml
         [wdgen] [Info]    Generating PublicPartFileList.properties
    <b>     [wdgen] WARNING: [Warning] Generation of PublicPartFileList.xml failed: null</b>
         [wdgen] [Info]    Generation finished (2 seconds)
         [wdgen]
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\classes
         [javac] Compiling 58 source files to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\classes
    Note: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\src\packages\com\chevron\wd_xcs\models\proxies\CVXSAMSI_CCSearchBindingStub.java uses or overrides a deprecated API.
    Note: Recompile with -deprecation for details.
         [timer] Java compiler finished in 2.781s
    [wdminimize] Start minimizer for project classpath:
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\classes
    [wdminimize] external classpath:
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_admin.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_basesrvc.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_clientserver.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_modelimpl.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_model_dynamicrfc.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_pdfobject.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_progmodel.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_designtime_coupling.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_designtime_coupling_api.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_repository.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_repository_pmr.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_services.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\activation\_comp\gen\default\public\default\lib\java\activation.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\com.sap.aii.proxy.framework\_comp\gen\default\public\default\lib\java\aii_proxy_rt.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\IAIKSecurity\_comp\gen\default\public\default\lib\java\iaik_jce_export.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\IAIKSecurity\_comp\gen\default\public\default\lib\java\iaik_jsse.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\IAIKSecurity\_comp\gen\default\public\default\lib\java\iaik_smime.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\IAIKSecurity\_comp\gen\default\public\default\lib\java\iaik_ssl.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\IAIKSecurity\_comp\gen\default\public\default\lib\java\w3c_http.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\com.sap.mw.jco\_comp\gen\default\public\default\lib\java\jrfc.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\com.sap.exception\_comp\gen\default\public\default\lib\java\exception.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\logging\_comp\gen\default\public\default\lib\java\logging.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\logging\_comp\gen\default\public\default\lib\java\logging.perf.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\ddic\ddicruntime\_comp\gen\default\public\default\lib\java\SapDictionaryTypeServices.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\ddic\ddicruntime\_comp\gen\default\public\default\lib\java\SapDictionaryTypesRuntime.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices\_comp\gen\default\public\default\lib\java\jaxm-api.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices\_comp\gen\default\public\default\lib\java\jaxrpc-api.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices\_comp\gen\default\public\default\lib\java\saaj-api.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices\_comp\gen\default\public\default\lib\java\sapxmltoolkit.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices\_comp\gen\default\public\default\lib\java\webservices_api.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\tc\cmi\_comp\gen\default\public\default\lib\java\_cmi_api.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices_lib\_comp\gen\default\public\default\lib\java\boot.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices_lib\_comp\gen\default\public\default\lib\java\iq-lib.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices_lib\_comp\gen\default\public\default\lib\java\tc_sec_wssec_lib.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices_lib\_comp\gen\default\public\default\lib\java\util.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\webservices_lib\_comp\gen\default\public\default\lib\java\webservices_lib.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\com.sap.aii.util.misc\_comp\gen\default\public\default\lib\java\aii_util_misc.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\mail\_comp\gen\default\public\default\lib\java\mail.jar
    [wdminimize]   C:\Documents and Settings\divy\.dtc\1\DCs\sap.com\sapxmltoolkit\_comp\gen\default\public\default\lib\java\sapxmltoolkit.jar
    <b>       [Ant] java.lang.reflect.InvocationTargetException
           [Ant]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
           [Ant]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
           [Ant]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
           [Ant]      at java.lang.reflect.Method.invoke(Method.java:324)
           [Ant]      at com.tssap.util.xml.DOMAccessInQMy.parse(DOMAccessInQMy.java:122)
           [Ant]      at com.sap.tools.webdynpro.smart.pp.PublicParts.parseConfigurationFile(PublicParts.java:55)
           [Ant]      at com.sap.tools.webdynpro.smart.pp.PublicParts.parsePublicParts(PublicParts.java:70)
           [Ant]      at com.sap.tools.webdynpro.smart.pp.PublicPartAnalyzer.analyze(PublicPartAnalyzer.java:171)
           [Ant]      at com.sap.tools.webdynpro.smart.pp.PublicPartAnalyzer.analyzePublicPartFileList(PublicPartAnalyzer.java:28)
           [Ant]      at com.sap.tools.webdynpro.smart.WDClassFileMinimizer.initialize(WDClassFileMinimizer.java:83)
           [Ant]      at com.sap.tools.webdynpro.smart.ClassFileMinimizerTask.execute(ClassFileMinimizerTask.java:155)
           [Ant]      at org.apache.tools.ant.Task.perform(Task.java:341)
           [Ant]      at org.apache.tools.ant.Target.execute(Target.java:309)
           [Ant]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
           [Ant]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
           [Ant]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:124)
           [Ant]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:67)
           [Ant]      at com.sap.tc.buildplugin.PluginVersion1WrapperAction.execute(PluginVersion1WrapperAction.java:32)
           [Ant]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginVersion1(PluginHandlerImpl.java:676)
           [Ant]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:627)
           [Ant]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:214)
           [Ant]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1386)
           [Ant]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5111)
           [Ant]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
           [Ant]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
           [Ant]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
           [Ant]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
           [Ant] Caused by: java.io.FileNotFoundException: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\gwd\PublicPartFileList.xml (The system cannot find the file specified)
           [Ant]      at java.io.FileInputStream.open(Native Method)
           [Ant]      at java.io.FileInputStream.<init>(FileInputStream.java:106)
           [Ant]      at java.io.FileInputStream.<init>(FileInputStream.java:66)
           [Ant]      at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:69)
           [Ant]      at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:156)
           [Ant]      at java.net.URL.openStream(URL.java:913)
           [Ant]      at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156)
           [Ant]      at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:211)
           [Ant]      at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
           [Ant]      at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
           [Ant]      at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:92)
           [Ant]      at com.sap.engine.lib.xml.parser.DOMParserExt.parse(DOMParserExt.java:24)
           [Ant]      at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:69)
           [Ant]      at com.sap.engine.lib.xml.parser.DOMParserExt.parse(DOMParserExt.java:19)
           [Ant]      ... 27 more</b><b>[wdminimize] ERROR: failed to parse public part file list
    [wdminimize] ERROR: Non Fatal Error: failed to analyze</b> public part definitions, minimizer skipped
    [wdminimize] WARNING: Minimization skipped due to non fatal errors (see above). Classes have not been touched.
         [timer] Class minimizer finished in 0.063s
    prepareStructure:
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package\PORTAL-INF\webdynpro
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package\PORTAL-INF\classes
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package\PORTAL-INF\srclib
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\gdd\datatypes
          [echo] Copy mimes from C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\src/mimes to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A/wda_package
          [copy] Copying 4 files to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package
          [copy] Copied 2 empty directories to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package
          [echo] Copy configurations sources from C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\src/configuration to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A/wda_package/PORTAL-INF/webdynpro
          [copy] Copied 3 empty directories to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package\PORTAL-INF\webdynpro
          [echo] Copy config files from C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A/gwd/configuration to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A/wda_package/PORTAL-INF/webdynpro
          [copy] Copying 2 files to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package\PORTAL-INF\webdynpro
          [echo] Copy src files from C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\src/packages to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A/wda_package/PORTAL-INF/classes
          [copy] Copying 17 files to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package\PORTAL-INF\classes
          [copy] Copied 2 empty directories to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package\PORTAL-INF\classes
          [echo] Copy deploy files
          [copy] Copying 1 file to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\wda_package\PORTAL-INF
          [echo] creating source code archive
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\src\java
           [zip] Building zip: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\src\java\src.zip
         [timer] Structure preparation finished in 0.578s
    package:
          [echo] Package files from C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A/wda_package
           [zip] Building zip: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\app.jar
           [zip] Building zip: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\chevrondcwd_xcs.wda
          [copy] Copying 1 file to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\ear_package\META-INF
          [copy] Copying 1 file to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\ear_package\META-INF
          [echo] Create deploy file chevrondcwd_xcs
        [jarsap] Info: JarSAP version 20041217.1600
        [jarsap] Info: JarSAPProcessing version 20041217.1600 / JarSL version 20041217.1600
        [jarsap] Property jarsap.info.dir is not set.
        [jarsap] Building: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\deploy\chevrondcwd_xcs.ear with compression
         [timer] JarSAP finished in 0.094s
    createPPs:
          [echo] * Web Dynpro Model Entities for PublicPart: pp_test_sda *
          [copy] Copying 16 files to C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\pp\pp_test_sda
          [echo] * Create PP jar pp_test_sda.jar *
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\public\pp_test_sda\lib\java
           [jar] Building jar: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\public\pp_test_sda\lib\java\pp_test_sda.jar
          [echo] Generating Entity References for Public Part: pp_test_sda
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\srcmerge
         [mkdir] Created dir: C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\public\pp_test_sda\src\java
           [zip] WARNING: skipping zip archive C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\public\pp_test_sda\src\java\src.zip because no files were included.
        [delete] Deleted 2 directories from C:\Documents and Settings\divy\.dtc\1\DCs\chevron\dc\wd_xcs\_comp\gen\default\public\pp_test_sda
        [delete] Deleting directory C:\Documents and Settings\divy\.dtc\1\t\1D1901AB9DE4964213B3D4BB33DE6D2A\srcmerge
         [timer] Public parts created in 0.203s
    build:
    Ant build finished OK
    Ant build finished at 2006-01-10 22:30:10 GMT+05:30 (IST), Duration: 8 seconds
    Cleaning up.
    Packages com.chevron.wd_xcs.models.proxies com.chevron.wd_xcs.models.proxies.types are not reserved for DC : dc/wd_xcs.
    Due to this Build of DC B fails.
    can any body help why that xml is not genrated in DC A

    Hi Jain,
    is the error message that the public part is not found prefixed with [dcmake]? If yes that rather points in the direction that there is a problem with the metadata information. (PP name not correctly spelled, renamed after initial creation, perhaps even some problems with upper/lower-case letters depending on your platform.)
    What SP are you using? The log looks like some rather old build plugins are used on a newer NWDI installation.
    The warning from the [wdgen] task and the subsequent failure of the [wdminimizer] can be ignored. "ERROR: Non Fatal Error" is a bit quaint, but it really is not fatal. It just means that the minimizer didn't find the data required to operate. The [wdgen] warning means that the WebDynpro generator could not write the information. So the jar files in your public part are maybe a bit bigger than necessary but that's all.
    Best regards,
    Marc

  • Method not found: 'Void National Instruments.LabVIEW.Interop.LV Runtime.throw MissingDependencyException()'.

    Method not found: 'Void National Instruments.LabVIEW.Interop.LV Runtime.throw MissingDependencyException()'.
    My colleague created a Labview DLL for me to use in .NET.
    I have tried getting this DLL to work in 3.5 framework however it only worked on framework 2.0. 
    I recently tried again and now it will not work in framework 2.0 or any available frameworks.
    He is using Labview 2011. 
    I am a little baffled as to how the application just stopped working. The National Instruments Runtime I am using is Labview 2011, version 1.1.0.0. The labview dll he gave me is using 1.1.0.0 as well. I have tried using 1.0.0.0 and I get an error saying there is a mismatch.
    In addition, for some reason I was never successful in making this work in 3.5, and now I can't make it work in 2.0 either.
    Any help is greatly appreciated. I have tried re-installing the runtime engine, tried different versions like labview 2013 but no luck... 
    Everything works except when I call the dll procedure:
    LabVIEWExports.AxBClusterArrays(out ERR, out OUTDLL, INDLL);
    My Code:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Text;
    using System.Windows.Forms;
    using NationalInstruments.LabVIEW.Interop;
    using InteropAssembly;
    namespace WindowsFormsApplication1
    public partial class Form1 : Form
    public Form1()
    InitializeComponent();
    private void Form1_Load(object sender, EventArgs e)
    InteropAssembly.LVCluster_1 OUTDLL = new InteropAssembly.LVCluster_1();
    InteropAssembly.LVCluster_2 INDLL = new InteropAssembly.LVCluster_2();
    double[] TestA = new double[1];
    double[] TestB = new double[1];
    for (int runs = 0; runs < 1; runs++)
    TestA[runs] = 1;
    TestB[runs] = 1;
    INDLL.A = TestA;
    INDLL.B = TestB;
    NationalInstruments.LabVIEW.Interop.ErrorCluster ERR = new NationalInstruments.LabVIEW.Interop.ErrorCluster();
    MessageBox.Show(NationalInstruments.LabVIEW.Interop.FrameworkVersion.Fx35.ToString());
    try
    //LabVIEWExports LVE = new LabVIEWExports()
    LabVIEWExports.AxBClusterArrays(out ERR, out OUTDLL, INDLL);
    catch (Exception f)
    MessageBox.Show(f.Message.ToString());

    Figured it out, I thought we where using Labview 2011, however it was Labview 2011 SP1. 
    Thus i had to install the runtime envioment 2011 SP1.
    Regards,
    ADL

  • I've Downloaded twice ''Additional Contents'' but the issue is still unresolved  ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)

    I've Downloaded twice ''Additional Contents'' but the issue is still unresolved  ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)
    Please Help

    "Additional Contents" I don't even know what that is? What app is it for?

  • Query string read as part of file name, throwing not found errors

    Hi all, I host a number of Web sites under a CF7 installation, Win2003.
    One site in particular is throwing not-found errors in response to certain search bot requests.
    In the IIS log, I noticed that for these requests, the query part of the URL is part of cs-uri-stem field value, but is not in the cs-uri-query field where it belongs:
    cs-uri-stem=                                               /index.cfm?template=24hour5.cfm
    cs-uri-query=<blank>
    instead of
    cs-uri-stem=                                               /index.cfm
    cs-uri-query=template=24hour5.cfm
    Evidently something somewhere is interpreting the entire URL as a filename, instead of a file name and a query string. When CF tries to locate the file it is throwing a not-found error.
    Maybe there is something weird about the question mark, but it looks normal to me.
    I can't seem to stop this error, since it is occuring at the OS, IIS, CF or jrun layer. Does anyone have any idea what is going on here, and what I can do about it?
    Thanks in advance.
    Joe

    Hey Reed, thanks for responding.
    I have a Cf utility that parses logs, so I modifed it to print out the ASCII codes for each character. They look normal, as far as I can tell. The question mark has a code of 63 which is correct, and no non-alphabetic characters precede or follow.
    One interesting thing is that the stem being called is an index.cfm file, and the query string argument happens to be a template name, and it ends in .cfm. That's why it is making it all the way to CF, which chokes on it, instead of IIS logging a 404 error.
    Often an identifiable bot is requesting these bad URLs, though I have spotted another request with agent 'Mozilla/4.0.' I suspect that is some kind of automated scan. (I also see other requests with the same agent name, though a different IP, that look like errononeously URL-encoded requests. These get filtered by URLScan.)
    I don't know for sure is whether the specific clients that make these bad calls always make them them wrong way. They appear to. Most clients that access the site do so normally.
    I wonder if there could be something in the request header, perhaps that instructs IIS to expect a different charset than what is actually used, or something like that.

  • Old problem new angle:EXS24 instrument audio file not found -but its THERE!

    So I know this has been posted on before, but I've read the forums and my problem seems slightly different.
    Was trying to open tenor sax, or alto sax.
    Created a new EXS24 track. In the Logic Studio Library it comes up with a long list of folders, bottom is '12 Legacy Instruments', inside that all there is is '05 Horns and Woodwinds' and '08 Drum Kits'. I go into Horns and Woodwinds, there are my instruments. When I click them it says not found.
    I checked in my finder window, (application support/Logic/Sampler Instruments/ 12 Legacy Instruments/05 Horns and Woodwinds). They ARE there. So that baffles me.
    Now, someone said on another forum its because they arent in the right place and SHOULD be in garage band (application support/garage band/Instrument Library/Sampler/Sampler Files/12 Legacy Instruments/05 Horns and Woodwinds), so I copied them from the previously described Logic destination to there.
    They STILL aren't working. It seems like Logic is looking in the right place but it says it cant find them?!
    Please help!
    (P.S - Annoyingly if it comes to reinstalling Logic Studio, I don't think I can do that. I bought my Mac Mini off ebay, and have forgotten the admin password, and have no OS discs to reset it. So until I can do that, I can't install anything (as you need the admin password. Any solutions that don't involve reinstalling Logic gratefully welcomed!)

    What I think you have to do is refresh the Spotlight index. Open the prefpanel Spotlight, go to the Privacy Tab, put all your disks on it (just drag 'm), close the panel, reopen it, remove the disks, close the panel, let your Mac sit for an hour or so while it is creating Spotlight indeces from scratch. Use *Activity Monitor* to check if Spotlight is done indexing. If you see MDS or MDWorker still active (=using CPU), it is not done.
    O and BTW, you should create an account for yourself of which you do have the admin password, or you will not be able to solve many possible problems.

Maybe you are looking for