Part Appraiser Functionality in SAP Objective Settings & Appraisals

Hi All,
I have specific requirement where, at the time of Annual Appraisal when Employee submits his/her final rating, Appraisal Form should be routed towards Part Appraiser, if the same has been selected in the form. If part appraiser is selected for all Appraisal Forms, then adding a new SubStatus (Part Appraisal in Process) under Status (Annual Appraisal) would have made sense. But in case where addition of part appraiser in appraisal template is dynamic, how should we achieve this kind of scenario?
Thanks a Lot!
Prashant

Hi Sameer,
Pls share with us if you know more details
We are also exploring the feasibility using Talent Management Specialist.
Regards
Badarinarayana

Similar Messages

  • Reporting - Objective Settings & Appraisals

    Hi,
    My client is using the Objective Settings & Appraisals component in SAP version ECC 5.0.
    Does anyone know how to generate a report of employees who do not have a current appraisal document on the system?
    Thanks,
    Janet

    Hi,
    Try using this report PHAP_SEARCH.
    Give the employee id in appraisee filed and execute.
    All the appraisal documents related to the employe will be available.
    You can download it to EXCEL or SMARTFORM.
    I assume u know ABAP.
    You can try using the table "HRHAP_APPEE". here you have to use the negative logic to get the employees who not have appraisal documents.
    Create a new report for this table and query with all active employees.
    For every sy-subrc fali, this means that the appraisal document does not exist.
    Hope this helps you.
    Regards,
    Subbu.

  • Status overview iview Objective Settings & appraisals

    Hi,
    is there a way to hide some status columns in the status overview iview of objective settings and appraisals. we tried by deactivating the available status in the appraisal template, but it does not seem to affect the iview.
    we would like to hide them since they are not used in our process.
    we are using ECC 5.0.
    regards,
    Bert Caryn

    Hi
    In our case, if a status is not used in Appraisal Template (in tcode OOAM - tab 'Status Flow' for the template - we removed the check against the unwanted status), that status column does not appear in Status Overview iView.
    This is FYI. I don't know why this is not the case with you, but you may un-release and release the template and check again.
    One more point - You may check view named V_TWPC_ACOL (Assign Columns to a Column Group). In this, you can set column visibility parameters such as ‘Visible’, ‘Invisible’ and ‘Do Not Display’.
    Hope this helps.
    Regards,
    Vikas Bhatia

  • 'Next Status' in status overview of Objective settings & Appraisals

    Hello,
    While configuring the status flow for a template in objective settings, we have the field called 'NEXT STATUS".
    There are only three options
    a. Save and change to display mode
    b. Save and leave Appraisal Document
    c. Nothing
    Infact, we wanted the the document to be saved and moved to the next status with "Change mode" (or at least the push buttons in the next status should be working).
    Is there any way to add this choice?
    Thank You
    Raghu Kolukuluri

    Raghu,
    The "NEXT STATUS" field specifies the status(save &leave or save &display), but you're talking about the status flow change, which is very much possible with in the same tab "Status Flow".
    There is a filed called Pushbutton, this is where you select the pushbutton for the form to change the status flow. This staus flow change you can define in the field "TARGET STATUS", if you have any substatus in that status you can define that in " TARGET SUBSTATUS".
    I hope this helps.Award points if this resolves your issue.
    Regards
    Ramakrishna Ramadurgam

  • HRHAP00_SELECTION Badi in Objective Settings & Appraisals

    Dear All
    Can we add one more element / authorised person in the appraisal template.
    As per my requirement i want to authorise one more person in the list apart from All users,Appraisee, Appraiser, Further Participant, Higher Level Manager, Part Appraiser.
    As per my view it is to be added in the above said BAdi, but I am not sure.
    How to add it?
    Thanks
    Vikas

    Ya Venki
    This is not a BAdi.
    Thanks for the reply. Actually what I am looking for is a workflow rule.
    Thanks
    Vikas

  • MSS Status overview iview Objective Settings & appraisals

    Hi All,
    Currently the status overview Iview of MSS for appraisals display all the employees(in org unit) irrespective of whether the employee/appraisee has existing documents. This is because this Iview also has the functionality of creating the appraisal documents from here.
    In our case we don't create appraisal documents from this Ivew, so we hide the "In Preparation".
    Now the question is we want to filter the employees and display only those who has appraisal documents already created. How could we achive this?
    All we need is: We wanted to give an view to higher level manager with all the employees who has apprisal documents in completed status and he need to just approve/reject. Is there any other way we can achive this with out using the Status Overview Iview. I am not able to locate any bsp which serves this purpose from HAP_DOCUMENT.
    Please adive me, how can I achive this.
    Apprciate your inputs and any kind of help.
    Thank You,
    Hari.

    Hi, Check HAP_CALIBRATION / search.htm and result.htm you can enhance his behavior modifying filtering,
    Best Regards.-

  • Adding more Push buttons in Status Flow of Objective Settings & Appraisals

    Hi,
    In my Template Design, under status flow tab, we are able to create new push buttons.
    SAP is allowing, to create only upto 3 push buttons per outbound status/sub-status combination.
    In our application, we need 5 push buttons in one of the outbound status/sub-status.
    Can any expert suggest me what should I do?
    Advanced thanks
    Regards
    Raghu K

    Raghu,
    The "NEXT STATUS" field specifies the status(save &leave or save &display), but you're talking about the status flow change, which is very much possible with in the same tab "Status Flow".
    There is a filed called Pushbutton, this is where you select the pushbutton for the form to change the status flow. This staus flow change you can define in the field "TARGET STATUS", if you have any substatus in that status you can define that in " TARGET SUBSTATUS".
    I hope this helps.Award points if this resolves your issue.
    Regards
    Ramakrishna Ramadurgam

  • Quarterly & Half yearly appraisal in objective settings and appraisals

    Hi,
    I've customized the Objective Settings and Appraisals, created a template with part appraisal & its working properly. In my company the appraisals take place every 6 months i.e twice a year. If I create an appraisal document for an employee with validity say 1 year i.e. 01.04.2009 to 31.03.2010 in infotype 0025. Now within same appraisal document using part appraisal concept how can I do appraisal of that employee 2 times. Is it possible or I'll have to create 2 records in infotype 25, first for first 6 months & second for next 6 months. what should be the standard process?

    Hello,
    The administrator functions are in transaction PHAP_ADMIN. If you have a customer report and want to assign this to the transaction you implement HRHAP00_ADMIN. This has the advantage that the document selection (screen) is a given and you only need to start the report on the selected documents.
    However, you normally would not give the administrator functionality to a 'normal' manager. This because the admin functions are performed without any checks and are very powerfull.
    Your requirement can be or done via statusflow configuration (with extention set 2.00 and higher) or only by the administrator. To be honest, I think the statusflow won't give you the flexibility you probably want in this case (do workflows get re-triggered, are value determinations restarted etc etc.)
    In our design resetting a document status is an interuption in the process which should only be possible for the administrator. The transaction phap_change_pa allows the manager to reset the document from completed to in process but thats all (This is not available in the portal).
    Regarsd and Groetjes,
    Maurice

  • Appraiser Authorization Issue (Objective Settings and Appraisals)

    Hello!
    We are currently using Objective Settings and Appraisals for our
    performance appraisals. ESS and MSS is also used during the process. We
    do not use structural authorizations either.
    Authorizations work fine for the vast majority of employees. However, we have an issue with some of our Human Resources users. For his/her ID they have authorization to certain personnel areas. However, his/her appraiser is in a personnel area they do not have authorization for. As a result, the appraisal does not show up when the user access ESS to work on their appraisal.
    For example we have an HR user who has access to information in
    personnel area 1081. However, her appraiser/manager is actually in 2054. As
    a result when she accesses her appraisal it says no entries exist.
    One solution we tried was selecting the 'No Authorization Check for Appraiser' on the
    template. With this selected, the appraisal shows up with the personnel
    number of the appraiser on the listing. When the appraisal is accessed
    and the user tries to perform an action, the following error pops up stating the
    appraisee person is not allowed and it has the appraiser number within
    the error message.
    Currently, we have the HR employee using a different ID for ESS that allows the
    user to access the appraisal. Is there anything standard that will
    allow the user to view the appraisal without using a different ID?

    Bump

  • Category Group (Objective Settings and Appraisals)

    Hi
    How can I create a new category group in the activity "Edit Templates" from the objective settings and appraisals?, The system automatically generates one category group Personnel Appraisals, so we need to create  a new one?
    This new category group is neccesary for the events appraisals (PE), and the category group that we had in the system is for personnel apraisals.
    Somebody can help me to response this question??
    Thaks,

    Hi Carlos
    Try to access transaction code PHAP_CATALOG.
    Through this transaction code, you will see all the categories of appraisal templates for personnel appraisals, SAP Learning Solution, recruitment, etc.
    Thanks,
    Gregg

  • Objective Settings and Appraisal Eval. Path Selection

    Goodday,
    I'm getting this particular error in MSS service 'Objective Settings and Appraisal'. One of my drop down selection is not returning any employees even after maintainng teh proper relationship. I have 3 selection for this service - 'All employees', 'Directly reporitng employees' and 'Business Unit Reporting'. For the first 2 selection, i was able to get the correct employee list. However, for the third selection, i did not get any outcome.
    When i checked in transaction 'PPSS', i was able to get the correct result out. My root object selection returns the position of the manager. My second object selection was based on the manager's position. This then returns the 'S' and 'P' of employees with 'z10' relationship to teh manager's position.
    However, this is not appearing in MSS OSA. Anything missing?
    Thanks

    Hi,
    Thansk for the feedback. I have gone thru both and the links are very general on intalling BP. We have been using ESS/MSS for the past couple of years and all is working fine. We have recently upgraded to ECC6. this is where i'm having the problem. Any ideas?

  • High level manager Accessing Appraisal in Objective Setting & Appraisals

    Hello,
    Can anyone please suggest me how the
    1. Next High Level Managers (all the way upto CEO), can access the appraisal of an employee from the portal.
    2. Also how the manager can access the appraisals of his previous employees, when the manager is transfered?
    In my previous project, when I was using ECC5.0, I have addresed all these requirements by creating custom copies of "manager status overview pages" of HAP_Document.
    In my current project, I am using ECC6.0 and we do not want any customizations.
    Is there any configurable way for these requirements?
    Thank you & Regards
    Raghu

    In the new PMP world, the manager can access the appraisals of his previous employees, when this manager is added as a Part Appraiser to the transferred employee's document.

  • Objective Settings and Appraisals

    Hi,
    Using TCode PHAP_Prepare_PA, we can assign the Appraisal Template to Either Org Unit, org Units with resrticted Templates.
    As per our requirement we need to assign the appraisal template to OM Object- Job Families. But this option is not available in PHAP_Prepare_PA. Also we can not maintain relationship of any Appraisal objects like VA, VB, VC thro PP01.
    Can you guys please suggest a way by which we can assign the appraisal templte to Job Families.
    Is there any patch that we need to apply?
    Best Regards,
    Chetan S. Wahane

    Hi Chetan,
    Add a column owner into an Appraisal Template, SAP Provides a Business Add-Ins(BAdI) name HRHAP00_COL_OWNER.
    This Business Add-In (BAdI) enables you to create further implementations, in addition to the standard SAP Implementations, with which you can provide further column owners.
    You can select the implementations in the appraisal catalog on the Column Access tab page.
    Regards,
    Selva

  • Objective Setting & Appraisals VS Appraisal System

    Hello,
    Trying to understand the meaning of customizing Objective Setting Appraisals instant of Appraisal System,
    Does anyone know if there is a way to transfer all the old Appraisal Models (BS Object) into the new Appraisal Template (VA Object) ?
    Another Question : Is it possible to continue using the old way (Appraisal System) with running projects and the Objective Setting & Appraisals for new needs? meaning - BAPIs like BAPI_APPRAISAL_CREATE \ CHANGE \ GETDETAILS will still work ?
    thanks !

    Hi Binu,
    I am not entirely clear about your requirement, but in OOHAP_VALUE_TYPE, for a specific proficiency value, if you have maintained a description for the value under 'Value description' then it will be displayed on the form within the 'Info' button.
    Regards,
    Priya.

  • EHP4: Objective Settings and Appraisals

    Hi,
    We are implementing EHP4 Objective settings and appraisals solution where we have a requirement that we need to set up weightings for criteria groups and also for criteria's seperately.Actualy client requires a solution where the HR should set up the weightings in the backend for criteria groups and hte manager shouldn't be able to change it afterwords.
    However manager should be able to edit the weightings for the criterias while running the web application.
    Could anyone have some idea?
    Early responce would be appreciated.
    Thanks,
    Sunny

    Hi Chetan,
    Thanks for your quick reply.If we could use the qualification catalog for the same then do we have an option to restrict the no. of certain entries for a particular category group becuase according to our requirement there can be no. of category groups.
    i.e we want the case that once set the system should recognize if the particular qualification group(containing some x no. of entires) is related only to particular category group.
    I hope you understood what I meant ?Anc also could you please elaborate this free enhancement option?
    Best Regards,
    Sunny

Maybe you are looking for