Part cost kf values are getting aggregated ......... can any one help me?
hello gurus....
iam designing a infocube in which there is a keyfigure 'partcost'.when i execute a query on this infocube, the part cost values for a particular part id are getting summed up. but the part cost ,whether for single or 100's of parts ,should be the same.
i dont want these part cost values in the query to be aggregated. what i should do now. declare this part cost as non cumulative kf or is there any solution for this ?
i have gone thru the sap help site, but unable to find a solution for this?
how to declare it as a non cumulative kf ?
can any one suggest me a with some detailed steps what should be done for this? very urgent . my project deadline is with in 2 days. i will be really thankful to u..
Hi Lokesh,
Pls check your post in BI General. part cost kf values are getting aggregated ......... can any one help me?
Regards
Hari
Message was edited by: Hari Krishnan K
Similar Messages
-
I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!
Hello joelfromn. charleston,
It seems you are unable to activate iMessage on a device with no carrier service. The following article provides information regarding activation issues:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Check your device settings
Make sure that you’re connected to a cellular data or Wi-Fi network. If you're using an iPhone, you'll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that your time zone is set up correctly.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
I have new I pad 2 and when I get connected to iMac I can't find it detected in I tunes can any one help me and i am new to I pad
If it's not showing on the left-hand sidebar of your Mac's iTunes (if you are on iTunes 11 then you can enable the sidebar via option-command-S) under Devices then see if this troubleshooting article helps : http://support.apple.com/kb/TS1591
-
Hello can any one help to get IDES CD'S
HI ALL
as i know i am not supposed to post this type of threat in this portal.
as i am away from INDIA . i don't had any way for my solution.
i need /help to get IDES on my note book.
can any one help me how to get those cd's.
infromation can sent to my id
my id : [email protected]
it is urgent
reward points for helping me out
cheers
kishorego Google!!! Seeing your track record of posts in this forum, please do some research of yourself before asking questions here. And put some time in your questions! Read the FAQ: http://developers.sun.com/resources/forumsFAQ.html.
Better questions (questions that have been researched and that are well phrased and provide sufficient knowledge of the problem and the problem area) get better answers. -
HT1338 can't get my camera to work with Skype can any one help me please
cant get my camra to work with skype can any one help me please
You posted in the OS X 10.3 forum instead of the Mac Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
What OS X version are you using?
Cheers, Tom -
what a crock of crap i tunes is followed instructions to get music off i pod on to new laptop lost 5.2 days of music can any one help please ?
The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.
-
I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.
If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
TRYING TO DOWNLAOD DIGITAL COPY OF PROMETHEUS ONTO ITUNES. KEEP GETTING AN ERROR MESSAGE OF 5000. CAN ANY ONE HELP?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
my Iphone 4S is stuck in DFU mode and its not responding connected to Itunes for a restore. I keep getting a 3194 error and 9006. Can any one Help?
What type of jailbreak was used on it?
-
as title can any one help me thank you
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
All of a sudden my login password won't be accepted can any one help but the weird part is after a few min the computer just turns its self on
This happened to me, too. I couldn't log in to ANY accounts on the machine. Restarted, failure again, restarted again.
Solution: Wait.
After restarting I let the machine sit for a minute. Then it worked!
I ran Onyx and repaired permissions. Big mistake, apparently. Now I have to type my admin password everytime I want to move or save. All my Office docs open as Read-Only. -
Hi all. My charger cable broke up by the computer. I can fix it myself but I can't find anywhere to buy cable. Can any one help?
Replacement MagSafe DC cables are not available. You'll need to work with the pieces you have or buy a new AC adapter (which would be the better choice).
-
I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?
Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc. -
can any one help i have lost safari on my powerMAC g4 and cant figure out how to get it back and safari 5 is not supported on my computer
Make sure there's enough free space on the startup disk.
Right or control click the MacintoshHD icon on your Desktop.
Click Get Info. In the Get Info window you will see Capacity and Available.
Make sure there's a minimum of 15% free disk space.
If there's sufficient disk space, the startup disk may need repairing.
Launch Disk Utility located in /Applications/Utilities
Select the startup disk on the left then select the First Aid tab.
Click Verify Disk (not Verify Disk Permissions)
You will need your install disc if the startup disk needs repairing.
Using Disk Utility to verify or repair disks
Maybe you are looking for
-
HELP - is my G4 with OS 9,.1 really in trouble?
Just bought a MacBook Pro and am copying files from my G4 onto a new external La Cie 500GB HD to transfer to MBP. The G4 froze in the middle of this. When I called the local Mac store to ask how to resolve the problem they got me out of the problem a
-
What is this mean when I see a gray screen with a symbol circle with single cross?
Why the gray screen appear on my screen? I have tried instructions and none is working. I think I loss it and I went ahead to reformat by using my CD and its not coming through and please help!
-
Accessing the field values in different fields for calculation
Hi, I am creating a report in which I have used breaks for grouping the customers by their category. I have used summary on the amount field to calculate the sum in the individual category and also for total amount. Now, I also want to add an column
-
No entry in Ledger LoV while running Import Journal from Purchasing
Hi, I am trying to run Import Journals in a GL responsibility: GL Superuser > > Journal > Import > Run. The Source is Purchasing. However when I try to select the Ledger name from the LoV, there are no values. Whats the solution to this? One of my co
-
Diaplay classification changes - S_ALR_87012289
Hello experts, I have a question on the report S_ALR_87012289. The requirement is display the changes to the classification in the vendor master. Though the change documents exist in the vendor master for the classification but when this report is e