Part I and Part II in migo

HI,
Can anyone please explain me what is part I and Part II in migo..when do we do part I and Part II. I am really confused.
Please give me some inputs
Thank you

>
scm.sd wrote:
> HI,
>
> Can anyone please explain me what is part I and Part II in migo..when do we do part I and Part II. I am really confused.
> Please give me some inputs
>
>
> Thank you
Suppose when you receive only delivery challan for goods receipt without excise invoice,then you refer only part 1
in excise tab of migo,later after receiving invoice,you can post part 2 using J1IEX(Capture -->Goods Receipt) with
reference to material document.
RG23A Part 1 - Raw material qty,RG23A Part 2 - Raw material Excise values
RG23C Part 1 - Capital goods/assets,RG23C Part 2 - Capitial goods excise values
Since asset is account assigned - 'A' in p.o,on goods receipt,2 entries will hit table one for 'Receipt',other for 'Issue'
RG23C Part 2 - 50% credit of excise values another 50% put on hold taken credit in next year

Similar Messages

  • Part I and Part II not updating in MIGO..about CIN( Country India Version)

    Hello,
    This is regarding Part 1 and Part II is not updating in MIGO.
    Case 1
    step1 : Doing ME21N.
    step 2 : Doing J1IEX ( Capture)
    step 3 : Doing MIGO ( Giving reference of posted Invoice)
    step 4 : Doing Invoice
    Step 5 : Posting J1iex.
    Step 6 : Trying to View Patrui and Part II tab in MIGO
    unable to do so.
    Case 2
    step1 : Doing ME21N.
    step 2 : Doing MIGO ( Capture and Post Excis Invoice)
    Step 3 : Doing MIRO.
    Step 4 : I am able to view Excise tab in MIGO.
    Could you able to answer why it is not updating MIGO? and how can we resolve this.
    Thanks & Regards
    Sudhansu

    Hello,
    Case1:
    1) In you first case you were capturing the excise invoice  before MIGO, so it means that you are only capturing the excise no Part1 and part2 entry.
    When you go to MIGO with ref to excise Invoice (In excise tab) then system will update both Part1 and part2 entry.
    so you can check these entries in J1I7 t.code.
    Note:Once your GR is saved then it is not possible to view excise tab in GR display(There is no question of Part1 and part2 entry).
    Case2)  Check the material is available in J1ID or not....check the material and plant. and chapter id combination.
    Then only you will get the excise invoice tab in MIGO (for Capture and Post of excise Invoice).
    Regards
    Mahesh Naik

  • Tax Reporter - Printing 941 Part 4 and Part 5  (Designee)

    How can i configure part 4 and part 5 for Form 941. I need to Print names and there information for Part4 and Part 5 on Form 941.
    Any steps for configuration will be apprecaited.

    Hi
    Did you figure out how to configure Part 4 and Part 5 in the 941 form. Any suggestions?
    Thanks

  • Where is a good place / to locate a parts breakdown and parts for a HP C5180, All-in-one photosmart​.

    Where is a good place to locate a parts breakdown schematic and parts that can be ordered for an HP C5180.
    I have a bad end on the flat black cable that runs between the main board and the display. I believe it to be part # Q8211-80155.
    I would appreciate any insight, Thanks!

    Where is a good place to locate a parts breakdown schematic and parts that can be ordered for an HP C5180.
    I have a bad end on the flat black cable that runs between the main board and the display. I believe it to be part # Q8211-80155.
    I would appreciate any insight, Thanks!

  • Printing part color and part black and white

    Hello Everyone,
    I am wondering if you happen to know how to print part of the page color and part black and white. In other words, what I am looking to do is print a page, and be able to select how much of it is with color ink, and how much of it is just with black ink. Is there a way to do this? Even if its just choosing a half page to be one or the other.
    Any info in regards to this would be great.
    Thanks

    John Danek wrote:
    ...Feel free to ask any "Print Design" questions like this here.
    ...and keep John guessing as to what software you are using.
    My post was not to specifically discourage you from posting in this forum. It was to point you to a better forum that would yield more relevant answers. If you choose to post in this general print design forum, you may need to be a little less general with your question.

  • Take part 1 and part 2 both entries after grn

    dear guru's,
                   i have done migo 101 but not taken excise part1 and so not able to take part 2 also so can u pls teel me how to take part1 and 2 after grn
    regards
    ujwal

    Hi,
    Steps to capture excise invoice after GRN
    1)Capture the Excise Invoice through J1IEX_C.
    2)Update the Part1 through J1I5(if required)
    3)Post the excise invoice through J1IEX_P
    4)Update registers through J2I5
    5)Get the print out by J2I6
    regards,
    sujit

  • Cancel of J1IEX part 1 and part 2 for the cancel GR

    Hi,
          I have on eproblem , user captured the Excise invoice with J1IEX part1  and GR done also the part2 is posted,  and now we want to reverse that, the problem is insted of Cancelling GR with MIGO cancellation user have done it by MBST  and as MBST  is not supported for CIN  due to this no entry is created for part 1 reversal,  now how to proceed further.
    regards,
      zafar

    zafar
    follow the return procedure with excise
    Once you post the excise amount In the SAP System, therefore, you have to reverse CENVAT posting correspondingly.
    1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
    2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
    Thus the excise postings are reversed.
    3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
    Laxman

  • VTC - MySQL 5 Development Part 1 and Part 2 for 1Z0-871 and 1Z0-872

    is that
    http://www.vtc.com/products/MySQL-5-Development-Part1-tutorials.htm
    http://www.vtc.com/products/MySQL-5-Development-Part2-Tutorials.htm
    a study guide (video training) for
    1Z0-871 MySQL 5 Developer Certified Professional Exam, Part I
    1Z0-872 MySQL 5 Developer Certified Professional Exam, Part II
    on http://www.vtc.com/ no link to Oracle MySQL exams. Everywhere in forum discussions you read about a study guide from 2005. I ask if I can use VTC for preperation?

    >I ask if I can use VTC for preperation?
    Certainly you *can* use it.  The material is not a brain dump or something that is illicit.  I assume the question you're really asking is whether the course is any good.  I have not viewed that particular VTC course but I have used some of their others.  I used one of their video courses for Linux+ when I was preparing for that exam. I do not believe it would have been sufficient in and of itself, but combined with a couple of books, it was certainly helpful.
    Since VTC does not develop their materials but rather have it developed independently by contractors, I don't know how much of my statement you can apply to the MySQL course.  They were almost certainly developed by two different people.  My suggestion would be to use it as a source to prepare for the exam, but not as your only source.

  • Reading a fle format thats part ascii and part binary

    Hey
    I'm trying to write a importer for the PLY filke format. That file format starts of with a header in ascii and then continues with either the data in ascii or in binary. When the data is in ascii I have no problem reading the file but when the data is in binary I'm noth quite sure how I should do it. Right now I do something like this:
    BufferedInputStream stream = new BufferedInputStream(new FileInputStream(file)); // I first create this
    BufferedReader reader = new BufferedReader(new InputStreamReader(stream));  // then this is for reader ascii
    DataInputStream dataInputStream = new DataInputStream(stream); // And this is for reading binaryThen I read the ascii header with the BuffereReader and then wheter I turns out that the data is in ascii I countine reading with the reader, otherwise I start reading with the DataInputStream. But the data from the DataInputStream is not the same as I get from the BufferedReader. I try it on these files that are in diffrent endians and either ascii ot binary
    http://www.cs.ucl.ac.uk/staff/Joao.Oliveira/ply.html in the Nbunny.zip.
    Anyone that can help me with this? Or know about a PLY file reader in java already?
    Discordia
    Message was edited by:
    Discordia

    DataInputStream is NOT the right class to use for general binary input. It is used only for the specific purpose of reading Java primitives. The input obviously needs to be in the right format for that to work, i.e. it needs to be written using a DataOutputStream.
    I would read everything using an InputStream, not a reader. Store the bytes of the header until you reach the end of the header (not sure how to determine that since I don't know the fileformat). Then convert those bytes into a String using the proper charset ("US-ASCII" in this case, if by "ascii" you really mean ASCII).
    Then just continue reading the binary data.

  • Season Pass Dr. Who Season 7 Part 1 AND 2

    I have purchased a "season pass" for Dr. Who Season 7.  I purchased BOTH part 1 and part 2, but for some reason not all the episodes are available.  I know the new ones take a few days... but what happened to the Snowmen Christmas Special.It doesn't make sense to watch the episodes of part 2 if you haven't seen the Snowmen episode.  We watch three of season 7 and kept thinking something was wrong... we missed something.  Finally figured out the Snowmen episode is missing.    It certainly should be part of season 7... either part 1 OR part 2, but it appears I have to pay additional to watch it.  Are we doing something wrong? or is there some reason this is being held out for a separate fee?
    In September I bought the season pass with the understanding it was for a SEASON.  I purchased part 2 begrudgingly, but thought I would be getting the rest of the season.  Seriously $30+ wasn't enough for a single season???  If there are going to be episodes "held out" of the season pass, there should certainly be a disclaimer letting the customer know.  I would have waited to by a DVD set if I'd known what this would cost me by the end of the season.  I am a big Apple fan, but unless I am doing something wrong to get the FULL season, this certainly seems like a scam.
    Anyone know if this is supposed to be this way?

    We are all just fellow users here and have no more idea than you do why any given item is not available. It's almost certainly an issue of rights, since the iTunes Store can sell only what they can license, but why ABC cannot or will not grant the rights is something no one here will know.
    Regards.

  • Excise Value change during Part 1 and 2

    Dear SAP Gurus,
    1.)Requirement is that material store person should not interfere in the excise transaction not even in part-1, but the doubt is  as per my knowledge part -1 can only be done before the GR or during the GR (along with GR). and client want part -1 and 2 can only be done by FI person so how to meet the requirment.
    2.) and if no alternative is there on above the Part-1 is happening during the GR , then material store person should not change any thing in Excise duties. and if the requirement is to change the excise duties , it can be changes during the Part -2 .
    Please suggest how to meet the requirment.
    Thanks & Regards
    Nitin Chhabra

    hi,
    Matain the proper box checked and unchecked in EXCISE GROUP SETTING in such a way that
    it will Disable the following otions at MIGO
    post excise invoice option
    only captre invoice option
    it will enable the following option
    only part1
    this will allow stores person to post only part one entries.There will not be any interference by stores person in excise duties.
    then after GR fi person can capture excise invoice through J1IEX by refering the material document.
    regards,
    SNB

  • Automatic Part 1 and  excise capturing while trans. stock from cong.to Own

    Hello;
    While transfering the consigment stock to Own (Movement tye :411K) , i would like to update part 1 and capture excise invoice, but excise tab dosent appear in MIGO(Transfer posting).
    Can any body help me how to automate this excise activity in consigement process
    Rgerads
    Manish

    Hi;
    I wanted to know the excise process(Part 1&2 ) in case of consigement process
    Rgerads
    Manish

  • Report to find a material by a mfr part number and old material number

    Hi,
    Is there any standard report to find a material by a mfr part number and old material number ?
    For the moment, we are using MM03 to search articles by these selection criterion.
    Thanks,
    Julien Girard

    Hi
    As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
    Use Txn SQVI, enter the Quick view field say- ZMNFR and click the  create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter  MARA  for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only.  Click the tick mark , you will go to the next screen,
    You will notice Quick viewer Intial screen
    Open the node general material data
    Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
    Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
    Please ensure that you are maintaining both the details in material master basic data1 and purchasing  view if you wish to get  out output
    Best regards
    SAM
    Edited by: samuel mendis on Apr 8, 2009 6:52 AM

  • Need field and table for spare part material and price for a given material

    Hi,
          In need to create a report with following fields:-
           Customer           Material          spare part material            spare part description             price                   currency.
    From which table and field I can get all this information.Please guide me.
    Hint.  cl30n transaction for material managemant.
             vk13 transaction for price maintenace.
    Regards.

    CL30N is a general transaction that can be used for any classification, but material master maintenance is usually MM01/MM02 or MM41/MM42
    Material description can be taken from table MAKT
    customer from table KNA1
    The question is what you are going to analyse? where do material and customer tie together? do you do the analysis on sales orders VBAK and VBAP ? or invoices  VBRK and VBRP? or customer material info record KNMT? 
    or do you capture this info in classification? then you get the values from AUSP
    Edited by: Jürgen L. on Aug 3, 2010 9:42 AM

  • Parent Excise invoice and part excise invoice

    Dear All,
    I am having following scenario:
    Customer is manufacturer of industrial cranes.
    It is not possible too send one crane in single vehical. And vehical is not pre-fix. Its decided at the time of delivery. so
    at the time of despatch Customer wants to create one Parent Excise invoice(Original) which goes with first vehical and part excise invoice and xerox copy of parent excise invoice with other vehical.  Parent excise invoice will have all the excise value details for complete despatch and in the part excise invoice will contain only basic value of parent excise invoice and no other conditions. and Both excise invoices should have local excise invoice number which is issued by excise authority. 
    Please let me know how to map this parent excise and part invoice concept.
    Regards,
    Sagar

    Hi
    The details given by you for scenario indicates that you are creating delivery for every partial despatch,and you also generate official excise invoice.
    you can try for following solution
    for Parent invoice you can go through the process as usual with J1IIN.
    For partial excise invoice you can create excise invoice through T.code J1IS with reference of either Material Document (MATD) or  creating and using proforma commercial invoiceas reference (OTHR) .
    Through User exit available in J1IS(  function group J1I7,) you can default things as per your logic such as series and excise groups .mainatianing duty values etc.
    I hope this helps you.
    Regards
    Mandar

Maybe you are looking for