Part II - Playing Ping-Pong ... now with KaLin?

Just call me flummoxed ...
I went to my "profile page for the forum" by clicking on my name. (So far so good)
I looked "at the top of the middle column," (Puzzled, I search for KaLin's promised support.)
THERE IS NOTHING REMOTELY RESEMBLING "an area titled "My Private Support Cases," nor any selection that leads to "My Private Support Cases."
THERE IS NO LINK to "the private board where you and the agent may exchange information."
And thus, it seems like the ping-pong game continues ...
I used to wonder why nobody responded to their original posts with updates. It appears that moderators prevent this from happening.
Eager for assistance, I remain yours sincerely,
marlowrog

Please check your Private Message Inbox. It should look like this -->>
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Similar Messages

Playing Ping-Pong ... aka Verizon Won't Support the "Verizon WiFi" Service Activation App

This post concerns the Verizon service called, "Verizon WiFi," which is introduced at the following web-page:
http://www.verizon.com/wifi
The service is explained in the following page:
http://www22.verizon.com/Support/Residential/internet/highspeed/networking/setup/wifi/124612.htm
The so-called "quick and easy" process to register and activate has occupied more than sixteen hours of time - so far - and regrettably, shows no signs of ever working. Two chat sessions, six (mostly marathon) CS calls, and I still can not find anyone who is inclined to fix the real problem, namely:
The "WiFi Activation" application (or wizard) will not accept as valid any user name that I type.
No matter what I enter into the User Name field (including the random strings provided by technical support in India), the application reports, "User name contains one or more invalid characters." Tried it 15 to times on multiple PCs ... always with the same results, "User name contains one or more invalid characters."
Telephone support is frustrating ... at best. Verizon DSL Dept. transfers me to VZ Wireless Dept., who eventually transfers me back to VZ DSL, who the transfers me to VZ FIOS Department, and then back to Wireless ... and so on. As y'all know, several of these transfers were to India and back. Last night (28 May) the trouble-ticket was escalated for action, and I was assured that I'd be contacted with the problem resolution..
I was not contacted.
This evening, I tried again. After lots more 'customer ping pong,' and repetition of yesterday's experiences, I was eventually told that the ticket (VAHM01NN**) had been closed. What gives? Why would an unresolved problem ticket be closed?
How about it, Verizon reps who read this?
Can one of y'all VZ reps help solve the problem with activating WiFi service so I can "Enjoy nationwide Wi-Fi access in select areas at over 5,000 hotspot locations -- at no extra charge" as trumpeted on the web-site? What office is responsible for technical support of the "WiFi Activation" application (named like the following, VZ.WIFI_2013_2013_29_10_12_44_8741ghu.app)?
Please help a brotha' out!
BTW. Every technician wants to dick around with my DSL modem ... instead of addressing the real problem. Please fix the flow-chart so that "Verizon WiFi" and "Verizon commericial WiFi hotspots" are addressed correctly!

marlowerog wrote:
This post concerns the Verizon service called, "Verizon WiFi" ... Please fix the flow-chart so that "Verizon WiFi" and "Verizon commericial WiFi hotspots" are addressed correctly!
I have this service running and it was not a simple setup. I cannot make a particular suggestion right now for your case, but I thought this link might help:
http://forums.verizon.com/t5/FiOS-Internet/TRYING-TO-REGISTER-FOR-WI-FI-FROM-Ipad/m-p/580463
Perhaps between the two of you, you'll encounter a resolution. Good luck.
Edit: After submitting my post on your issue, I discovered that you have initiated 3 separate threads on the same subject. Of course I had no way of knowing this prior to posting, and I found this confusing. Subsequently I realized that I'm unlikely to be able to help. In any case, best of luck.

Meters are playing ping-pong. Argh!

I know I'm missing something very simple. I am trying to acquire voltages in parallel from 2 Agilent 34401, serial ports 3 and 4. I'm only triggering 1/sec, but the meters acquire back and forth, ping-pong style. I don't understand this. Both are getting the same trigger. I only need to do a simple A/B math function but can't since both voltages need to be read at the same time. This is driving me nuts.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell
Solved!
Go to Solution.

Have you built a table of values that go to your meters?
Since you are reading a single point, your meters are showing that value. If at each iteration the values are:
5
1
8
3
8
5
8
6
3
8
6
9
2
6
4
On a scale of 0 to 10, you will notice the needle going back & forth.
For the same scale (0 - 10), if some of your values are over 10:
5
12 > 2
8
3
9
11 > 1
8
9
12 > 2
8
11 > 1
9
10
11 > 1
10
12 > 2
9
11 > 1
and so on... it will be an even more pronounced "ping pong"

Hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's

hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's

when you connect your phone with your computer and use itunes you can click on the phone
and click on an update button
about facebook games then think they are all flash based and iphones cant do flash so thats not possible

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
Anyone can help me?
Thank you, Claudio

Hi Russ, Thank you for your reply!
System Spec:
2x2.26 Ghz QUAD-CORE
12 GB RAM 1066 MHz DDR3
I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
Everything all right in iMovie.
I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
I do hope you may suggest something, I'm getting crazy!
Thank you in adavance
Claudio

I have the adaptor I used to use to play Netflix from my iPad to the tv but I can't do it now with my ipad2

I have the adaptor I used to use to play Netflix from my iPad to the tv but I can't play it now with y ipad2. The screen is blank?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Desktop multiplayer ping-pong game

Hello all,
I've come here to seek advice related to my university project. I am almost a complete newbie at Java - during the past years I've only done programming in C, C++, Symbian and PHP. I remember doing a project in Java on the first year, but now I don't remeber anything.
Let's get to the point. I think I won't have problems with the language itself and the structure of the application. Yet, I would be very grateful if you could guide me to the resources/libraries/classes I should use in my project.
It will be a multiplayer network ping-pong game in a frame window, with a game frame, some menubar and a chat below the game frame. My question is: what class should I use to create a window for the whole application? What class for the game screen, where it will be neccesary to paint a ball jumping here and there and two rackets? What classes would you recommend for handling the network communication between two instances of the application? Any other suggestions would also be welcome. I have less than three weeks to implement this game:)
Thanks in advance.
Maciej Gawronski

I guess you haven't taken the google class yet...
http://www.softlookup.com/tutorial/games/ch2.asp
http://javaboutique.internet.com/tutorials/Java_Game_Programming/
Edited by: Mr.E.H. on Jan 2, 2008 3:01 PM

Trying to make a Ping Pong Ball generate in random location

Hey guys and Gals,
im trying to make a pingpong ball, well 2 of them spawn in random locations so that it makes the game a little harder as of right now the ping pong balls spawn right next to each other and untill score 5-6 there right next to each other

I disagree with Caillen. If somebody is trying to learn a programming language writing a game is an excellent way of learning. In the constructor to the form (or form load function ) you can change the X,Y location of the ball(s). You also want
to make sure the two balls don't overlap. To make the programming simpler I would start the two balls at the same Y coordinate (or X).
See code below. I used a little clever programming to prevent the two ball from overlapping. The code assumes the left side of the panel x = 0. If it is not zero then add the X of the left side of the panel to the results.
int widthPanel = 10;
int diameterBall = 2;
Random rand = new Random();
int ball1X = rand.Next(diameterBall / 2, widthPanel - (diameterBall / 2));
//now get a random number that is space not taken up by ball one
int ran2 = rand(0, widthPanel - diameterBall);
int ball1Left = ballX - (diameterBall / 2);
int ball2X = 0;
if(rand2 <= ball1X)
ball2X = rand2;
else
int ball1Right = ballX + (diameterBall / 2);
ran2 -= ball1Left;
ball2X = ball1Right + ran2;
jdweng

OMF and AAF exports -limited functionality now with 'raw' DSLR audio files.

I'm an post production sound mixer...and a film maker and thus I see PP CS5 from 2 sides. I'm using CS5 with a PC.
The industry uses OMF or AAF to export from a video workstation to an audio one. However PP CS5's OMF and AAF are both flawed.
I often had trouble exporting OMF's (from CS4) which failed without any reason popping up from the software. I usually believed this to be because of the OMF's restriction to 2Gb so I exported single tracks when I believe the source files are large...even when specifing say only 50 frame handles.
AAF more often worked with large files but the exports become large of course (that's OK) and all video material had to be deleted in the sequence before doing an AAF export.
I am now using CS5 and dropping my Canon 5D2 'H264' and Panasonic GH-1 'mts' files directly on the timeline instead of converting them to avi's with Neoscene. Great ...but alas all OMF's or AAF exports now fail....they will only work if I get my audio back to being wav files again, which isn't really viable once editing has occurred.
I know that OMF is fraught...Avid never made it easy but AAF is a more up to date exchange protocol. Could I request that this is investigated and an intermediate transcode to something like wav or AIFF be undertaken by Media Encoder when an AAF export is used? I assume that the encoder doesn't yet know how to process audio .movs or mts files into the required export audio file and just kills the process.
David Taylor Postfade Sound Pinewood Studios UK

Stan,
Thanks for the suggestion...I submitted a Bug Report.
I used both OMF and AAF to export from PP CS4 to my professional Fairlght DAW, which was happy with either, as long as the export was succesful. As I said there were occasional problems with OMF even though I selected small 'audio handles' for the 'embedded' OMF exports. My source audiofiles are often pretty big. AAF worked with these big source files however.
However I always used Neoscene to transcode my DSLR files before importing the Neoscene converted .AVI's into CS4, the audio was part of the new .AVI's and was probably now a .WAV.
Now with CS5 I can drop the Canon 5D2's 'H264. mov's' or the Panasonic GH-1's '.mts' video files directly into PP-which plays them beautifully.
My trouble now starts when I try and export the edited audio to my DAW. I can only get it to work with source files that are .WAV.
I don't think other professional users, like all those new PP CS5 machines at the BBC, will be happy with the compromised OMF/AAF exports either as so many of us are using DSLR's now.
David

Ping Pong Balls!

Yes! Someone described it!
I've upgraded to an iMac G5, and am passing my 600mHz Graphite onto someone else. When the Graphite was in my ownership, every time I started up, I heard one or two ping pong balls type sound, and everything started up hunky dory.
At the time, my HD was partitioned into 3 (15/15/10) with Panther on one and OS9 on another.
Now, I'm trying to get everything set up all virginal like for the hand-over.
Originally repartioned the HD into 2 (36/4) and reinstalled OSX on the larger, OS9 on the smaller. Transferred a lot of stuff from an old Rev B 233 iMac into the smaller partition for later use. Did Software updates and started hearing really strange sounds - like a constant arcing (though it didn't quite sound electrical).
Have repartitioned again the HD - 1 piece only. Now I'm hearing a LOT of the pingpong ball sound and startup and other operations sometimes are painfully slow (even shutdown). Have zapped PRAM (helped a little, it seems), but not perfectly. Is the HD on the way out?

www.iamnotamerican.com...
Every HD that I have heard that from has died, however partitioning may have a different effect.
I have an IBM HD that once was partitioned for use in my iMac years ago. It was a 5400 drive that would spinup and "yaw" (like a donkey noise) for each partition at boot. I soon replaced it however it is still alive for use in a USB enclosure for backup purposes.
So it may be on the way out OR in the process of booting it is going through the mounting of each partition to complete the boot. I would start backing up and be prepared for the worse should it later go sour.
...Ron

What do I need to make 32bit games play on x86-64 with intel gm965?

I have been trying to get a bunch of 32bit games to play on x86-64 with no luck.
Ive tried quake4, prey, and now doom3 and all seem to have the same issues. They start to work and the screen goes black, then it just goes right back to the desktop.
I have installed the entire lib32 group, and still no luck. I even tried install lib32-intel-dri from aur but still no luck.
Do I still use lib32-nvidia-utils with an intel chipset, because thats what gets installed by default when i install the lib32 group?
Here is the output from doom3 (quake4, and prey had a very similar output where they all said idRenderSystem::Shutdown() but I already removed the packages out of frustration so I dont have the outputs from them, Im pretty sure its probably the same exact problem with all of them though)
[tj@arch ~]$ doom3
DOOM 1.3.1.1304 linux-x86 Jan 16 2007 21:58:02
found interface lo - loopback
found interface wlan0 - 192.168.1.50/255.255.255.0
------ Initializing File System ------
Loaded pk4 /opt/doom3/base/game01.pk4 with checksum 0x51c6981f
Loaded pk4 /opt/doom3/base/game02.pk4 with checksum 0xf3ec6f7
Loaded pk4 /opt/doom3/base/game03.pk4 with checksum 0x5d4230ea
Loaded pk4 /opt/doom3/base/pak000.pk4 with checksum 0x28d208f1
Loaded pk4 /opt/doom3/base/pak001.pk4 with checksum 0x40244be0
Loaded pk4 /opt/doom3/base/pak002.pk4 with checksum 0xc51ecdcd
Loaded pk4 /opt/doom3/base/pak003.pk4 with checksum 0xcd79d028
Loaded pk4 /opt/doom3/base/pak004.pk4 with checksum 0x765e4f8b
Loaded pk4 /opt/doom3/base/pak005.pk4 with checksum 0x8ffc3621
Loaded pk4 /opt/doom3/base/pak006.pk4 with checksum 0x95b65ab
Loaded pk4 /opt/doom3/base/pak007.pk4 with checksum 0x666bdb3c
Loaded pk4 /opt/doom3/base/pak008.pk4 with checksum 0x23ae5993
Current search path:
/home/tj/.doom3/base
/opt/doom3/base
/opt/doom3/base/pak008.pk4 (3 files)
/opt/doom3/base/pak007.pk4 (38 files)
/opt/doom3/base/pak006.pk4 (48 files)
/opt/doom3/base/pak005.pk4 (63 files)
/opt/doom3/base/pak004.pk4 (5137 files)
/opt/doom3/base/pak003.pk4 (4676 files)
/opt/doom3/base/pak002.pk4 (6120 files)
/opt/doom3/base/pak001.pk4 (8972 files)
/opt/doom3/base/pak000.pk4 (2698 files)
/opt/doom3/base/game03.pk4 (2 files)
/opt/doom3/base/game02.pk4 (2 files)
/opt/doom3/base/game01.pk4 (2 files)
game DLL: 0x0 in pak: 0x0
Addon pk4s:
file system initialized.
----- Initializing Decls -----
------- Initializing renderSystem --------
using ARB renderSystem
renderSystem initialized.
5206 strings read from strings/english.lang
----- Initializing Sound System ------
sound system initialized.
----- R_InitOpenGL -----
Setup X display connection
dlopen(libGL.so.1)
Initializing OpenGL display
Using XFree86-VidModeExtension Version 2.2
DGA DirectVideo Mouse (Version 2.0) initialized
Free86-VidModeExtension Activated at 640x480
Using 8/8/8 Color bits, 8 Alpha bits, 24 depth, 8 stencil display.
GL_RENDERER: Mesa DRI Intel(R) 965GM GEM 20090712 2009Q2 RC3
GL_EXTENSIONS: GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_draw_range_elements GL_EXT_framebuffer_object GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_vertex_array GL_IBM_texture_mirrored_repeat GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_env_combine4 GL_NV_texture_rectangle GL_NV_texgen_reflection GL_NV_vertex_program1_1 GL_SGIS_generate_mipmap GL_SGIS_texture_lod
------- Input Initialization -------
XKB extension: compile time 0x1:0x0, runtime 0x1:0x0: OK
XKB extension present on server ( 0x1:0x0 )
dlopen(libasound.so.2)
asoundlib version: 1.0.21a
Alsa is available
------ Alsa Sound Initialization -----
opened Alsa PCM device default for playback
device buffer size: 5644 frames ( 22576 bytes )
allocated a mix buffer of 16384 bytes
...using GL_ARB_multitexture
...using GL_ARB_texture_env_combine
...using GL_ARB_texture_cube_map
...using GL_ARB_texture_env_dot3
...using GL_ARB_texture_env_add
...using GL_ARB_texture_non_power_of_two
...using GL_ARB_texture_compression
X..GL_EXT_texture_compression_s3tc not found
...using GL_EXT_texture_filter_anisotropic
maxTextureAnisotropy: 16.000000
...using GL_EXT_texture_lod
...using GL_1.4_texture_lod_bias
X..GL_EXT_shared_texture_palette not found
...using GL_EXT_texture3D
...using GL_EXT_stencil_wrap
X..GL_NV_register_combiners not found
X..GL_EXT_stencil_two_side not found
X..GL_ATI_separate_stencil not found
X..GL_ATI_fragment_shader not found
X..GL_ATI_text_fragment_shader not found
X..GL_ARB_vertex_buffer_object not found
...using GL_ARB_vertex_program
...using GL_ARB_fragment_program
X..EXT_depth_bounds_test not found
---------- R_NV20_Init ----------
Not available.
----------- R200_Init -----------
Not available.
---------- R_ARB2_Init ----------
Available.
----- R_ReloadARBPrograms -----
glprogs/test.vfp
glprogs/test.vfp
glprogs/interaction.vfp
glprogs/interaction.vfp
glprogs/bumpyEnvironment.vfp
glprogs/bumpyEnvironment.vfp
glprogs/ambientLight.vfp
glprogs/ambientLight.vfp
glprogs/shadow.vp
glprogs/R200_interaction.vp
glprogs/nv20_bumpAndLight.vp
glprogs/nv20_diffuseColor.vp
glprogs/nv20_specularColor.vp
glprogs/nv20_diffuseAndSpecularColor.vp
glprogs/environment.vfp
glprogs/environment.vfp
glprogs/arbVP_glasswarp.txt: File not found
glprogs/arbFP_glasswarp.txt: File not found
WARNING: vertex array range in virtual memory (SLOW)
signal caught: Segmentation fault
si_code 1
Trying to exit gracefully..
Shutting down sound hardware
----------- Alsa Shutdown ------------
close pcm
dlclose
idRenderSystem::Shutdown()
double fault Segmentation fault, bailing out
*** glibc detected *** ./doom.x86: double free or corruption (!prev): 0x0c3a5560 ***
======= Backtrace: =========
/opt/lib32/lib/libc.so.6[0xf73ea5e1]
/opt/lib32/lib/libc.so.6[0xf73ebce2]
/opt/lib32/lib/libc.so.6(cfree+0x6d)[0xf73eedad]
/opt/lib32/usr/lib/libGLcore.so.1[0xf4c96c97]
/opt/lib32/lib/libc.so.6[0xf73ac36f]
/opt/lib32/lib/libc.so.6[0xf73ac3df]
./doom.x86[0x829e225]
/lib/ld-linux.so.2[0xf7759517]
/opt/lib32/lib/libdl.so.2[0xf7727c84]
/lib/ld-linux.so.2[0xf7753a96]
/opt/lib32/lib/libdl.so.2[0xf772807c]
/opt/lib32/lib/libdl.so.2(dlclose+0x2a)[0xf7727cba]
./doom.x86[0x835e008]
======= Memory map: ========
08048000-0842e000 r-xp 00000000 08:03 391681 /opt/doom3/doom.x86
0842e000-08448000 rwxp 003e6000 08:03 391681 /opt/doom3/doom.x86
08448000-0a613000 rwxp 00000000 00:00 0
0be99000-0c4e0000 rwxp 00000000 00:00 0 [heap]
f46b7000-f48b8000 rwxp 00000000 00:00 0
f48b8000-f497b000 r-xp 00000000 08:03 269600 /opt/lib32/usr/lib/libasound.so.2.0.0
f497b000-f497f000 rwxp 000c3000 08:03 269600 /opt/lib32/usr/lib/libasound.so.2.0.0
f497f000-f5999000 r-xp 00000000 08:03 270117 /opt/lib32/usr/lib/libGLcore.so.190.42
f5999000-f59df000 rwxp 01019000 08:03 270117 /opt/lib32/usr/lib/libGLcore.so.190.42
f59df000-f59ed000 rwxp 00000000 00:00 0
f59ed000-f5a84000 r-xp 00000000 08:03 270127 /opt/lib32/usr/lib/libGL.so.190.42
f5a84000-f5a9d000 rwxp 00097000 08:03 270127 /opt/lib32/usr/lib/libGL.so.190.42
f5a9d000-f5aac000 rwxp 00000000 00:00 0
f6600000-f6621000 rwxp 00000000 00:00 0
f6621000-f6700000 ---p 00000000 00:00 0
f67d7000-f67e1000 r-xp 00000000 08:03 269298 /opt/lib32/lib/libnss_files-2.10.1.so
f67e1000-f67e2000 r-xp 00009000 08:03 269298 /opt/lib32/lib/libnss_files-2.10.1.so
f67e2000-f67e3000 rwxp 0000a000 08:03 269298 /opt/lib32/lib/libnss_files-2.10.1.so
f682c000-f6833000 r-xp 00000000 08:03 269301 /opt/lib32/lib/librt-2.10.1.so
f6833000-f6834000 r-xp 00006000 08:03 269301 /opt/lib32/lib/librt-2.10.1.so
f6834000-f6835000 rwxp 00007000 08:03 269301 /opt/lib32/lib/librt-2.10.1.so
f6835000-f6839000 r-xp 00000000 08:03 269915 /opt/lib32/usr/lib/libXfixes.so.3.1.0
f6839000-f683a000 rwxp 00003000 08:03 269915 /opt/lib32/usr/lib/libXfixes.so.3.1.0
f683a000-f6842000 r-xp 00000000 08:03 269710 /opt/lib32/usr/lib/libXrender.so.1.3.0
f6842000-f6843000 rwxp 00007000 08:03 269710 /opt/lib32/usr/lib/libXrender.so.1.3.0
f6843000-f684b000 r-xp 00000000 08:03 269917 /opt/lib32/usr/lib/libXcursor.so.1.0.2
f684b000-f684c000 rwxp 00007000 08:03 269917 /opt/lib32/usr/lib/libXcursor.so.1.0.2
f684c000-f684d000 rwxp 00000000 00:00 0
f684d000-f684f000 rwxp 00000000 00:0c 1497 /dev/zero
f684f000-f6850000 r-xp 00000000 08:03 270124 /opt/lib32/usr/lib/libnvidia-tls.so.190.42
f6850000-f6851000 rwxp 00000000 08:03 270124 /opt/lib32/usr/lib/libnvidia-tls.so.190.42
f6851000-f6852000 ---p 00000000 00:00 0
f6852000-f7056000 rwxp 00000000 00:00 0
f7097000-f70cb000 rwxp 00000000 00:00 0
f710c000-f713b000 rwxp 00000000 00:00 0
f71bd000-f71fa000 rwxp 00000000 00:00 0
f72bd000-f731b000 rwxp 00000000 00:00 0
f735c000-f735d000 rwxp 00000000 00:00 0
f735d000-f7361000 r-xp 00000000 08:03 269698 /opt/lib32/usr/lib/libXdmcp.so.6.0.0f7361000-f7362000 rwxp 00003000 08:03 269698 /opt/lib32/usr/lib/libXdmcp.so.6.0.0
f7362000-f7363000 rwxp 00000000 00:00 0
f7363000-f7365000 r-xp 00000000 08:03 269696 /opt/lib32/usr/lib/libXau.so.6.0.0
f7365000-f7366000 rwxp 00001000 08:03 269696 /opt/lib32/usr/lib/libXau.so.6.0.0
f7366000-f737e000 r-xp 00000000 08:03 269664 /opt/lib32/usr/lib/libxcb.so.1.1.0
f737e000-f737f000 rwxp 00017000 08:03 269664 /opt/lib32/usr/lib/libxcb.so.1.1.0
f737f000-f74bf000 r-xp 00000000 08:03 269303 /opt/lib32/lib/libc-2.10.1.so
f74bf000-f74c1000 r-xp 00140000 08:03 269303 /opt/lib32/lib/libc-2.10.1.so
f74c1000-f74c2000 rwxp 00142000 08:03 269303 /opt/lib32/lib/libc-2.10.1.so
f74c2000-f74c5000 rwxp 00000000 00:00 0
f74c5000-f74e2000 r-xp 00000000 08:03 269791 /opt/lib32/usr/lib/libgcc_s.so.1
f74e2000-f74e3000 rwxp 0001c000 08:03 269791 /opt/lib32/usr/lib/libgcc_s.so.1
f74e3000-f7507000 r-xp 00000000 08:03 269299 /opt/lib32/lib/libm-2.10.1.so
f7507000-f7508000 r-xp 00023000 08:03 269299 /opt/lib32/lib/libm-2.10.1.so
f7508000-f7509000 rwxp 00024000 08:03 269299 /opt/lib32/lib/libm-2.10.1.so
f7509000-f750a000 rwxp 00000000 00:00 0
f750a000-f75f2000 r-xp 00000000 08:03 269783 /opt/lib32/usr/lib/libstdc++.so.6.0.13
f75f2000-f75f3000 ---p 000e8000 08:03 269783 /opt/lib32/usr/lib/libstdc++.so.6.0.13
f75f3000-f75f7000 r-xp 000e8000 08:03 269783 /opt/lib32/usr/lib/libstdc++.so.6.0.13
f75f7000-f75f8000 rwxp 000ec000 08:03 269783 /opt/lib32/usr/lib/libstdc++.so.6.0.13
f75f8000-f75ff000 rwxp 00000000 00:00 0
f75ff000-f760c000 r-xp 00000000 08:03 269921 /opt/lib32/usr/lib/libXext.so.6.4.0
f760c000-f760d000 rwxp 0000d000 08:03 269921 /opt/lib32/usr/lib/libXext.so.6.4.0
f760d000-f7723000 r-xp 00000000 08:03 269704 /opt/lib32/usr/lib/libX11.so.6.3.0
f7723000-f7727000 rwxp 00115000 08:03 269704 /opt/lib32/usr/lib/libX11.so.6.3.0
f7727000-f7729000 r-xp 00000000 08:03 269311 /opt/lib32/lib/libdl-2.10.1.so
f7729000-f772a000 r-xp 00001000 08:03 269311 /opt/lib32/lib/libdl-2.10.1.so
f772a000-f772b000 rwxp 00002000 08:03 269311 /opt/lib32/lib/libdl-2.10.1.so
f772b000-f773f000 r-xp 00000000 08:03 269308 /opt/lib32/lib/libpthread-2.10.1.so
f773f000-f7740000 ---p 00014000 08:03 269308 /opt/lib32/lib/libpthread-2.10.1.so
f7740000-f7741000 r-xp 00014000 08:03 269308 /opt/lib32/lib/libpthread-2.10.1.so
f7741000-f7742000 rwxp 00015000 08:03 269308 /opt/lib32/lib/libpthread-2.10.1.so
f7742000-f7745000 rwxp 00000000 00:00 0 /usr/bin/doom3: line 5: 10177 Aborted linux32 ./doom.x86 $*
[tj@arch ~]$
Last edited by tjwoosta (2009-11-12 21:19:35)

Dump lib32, get a 32-bit chroot, and run with schroot -p "your game"
Within your chroot you'd need to have the intel drivers installed in a version exactly matching your main system's. It takes a bit more HD space (less than 1 GB), but you get a much easier system since you're using the packages maintained in the repos by devs/TUs instead of lib32 packages maintained (primarily) by volunteers for their own specific system.

Trouble with loading videos - Manually manage music and videos not supported now with iOS5 and a 1st gen iPad?

Since updating my iPad 1st gen to iOS5.0.1 videos don't get loaded properly into the Videos app.
On the Summary page in iTunes of my docked iPad, I have always checked the box for "Manually manage music and videos".
I have my reasons for doing it this way, but that's for another thread perhaps.
The problem is that when I load a video to my iPad this way - by simply just dragging it from the desktop and onto the iPad, under Devices in iTunes - it copies/updates, and shows up on the iPad like it always has before iOS5. But now, with iOS5, when I undock, it can't be found anywhere within the Videos app on the iPad. The only way I can find it is to do a Search, which seems to find it, but when I click it, a different video plays - the first video in the Movies list in the Video app. Dock the iPad again, yes the video is there, according to iTunes, but no way to play it once iPad is undocked.
My suspicion is that with iOS5 you are no longer able to use the "Manually manage music and videos (Mmm&v)" that you will be forced to run everything through iTunes - and probably iCloud. I've unchecked the Mmm&v box, and get prompted with "Are you sure? - All existing content on the iPad will be replaced with content from your iTunes library". READ - "Rebuild your entire video and music collection, and this time run it all through iTunes. Welcome to iOS5. Have a nice day or two wasting your time rebuilding your entire video and music collection. Don't fight it. Use iTunes for everything! Until we finally make iTunes a decent piece of digital media management software, then you'll have to do it all again."
Okay, rant over - Anyone out there with running iOS5 on a 1st gen iPad with the Mmm&v option checked and able to load a video manually (not through iTunes)? Any other thoughts?
Thanks

Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
Bythe way, here is how i fixed it :
1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
2-It showed a threating message that it will erase my music and videos ,......
3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
However, I can not get a AV chat working to a real user....
In response to your suggestions:-
I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
Internet sharing is off.
I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
Thanks again

Where to now with my 'old' Apple TV?

As far as I understand the situation now with Apple TV, my 'old' ATV with onboard storage has been dropped by Apple. Does this now mean that if my current one fails I am faced with the options of either searching for a used one or abandoning my current setup altogether whereby my music files are stored on my ATV and played through my lounge stereo system?
I don't want to stream from my PC, so in dropping the ATV with storage where does Apple expect me to go?

Chenks wrote:
maybe it's your library size, but it doesn't take 30 seconds for my library to load (284 movies, 84 separate tv seasons, 520 music albums).
True, but the bottom line is that my experience with the black Apple tv doesn't match that of the White one, airplay doesn't make up for the simplicity of just works, works well and works quickly.
i find using the "unwatched" sub-menu now makes it easier to find stuff, as 95% of the time you'll be watching something that is new anyway.
I like to rewatch a lot of my home made movies, I also rewatch a lot of science documentaries and my son may watch something in his bedroom and we may want to watch it later in our bedroom for example. The unwatched menu doesn't help at all in those cases. I think the fact that you now use the unwatched menu as a workaround and that it only works 95% of the time for you indicates that you too have found it less convenient.
Don't get me wrong, the black Apple tv is a great device, had it have been the first in the line I may not have any complaints, but when it follows the White version, it sort of feels like in some areas we've gone from the internal combustion engine back to the horse.

Play a QuickTime file with eight separate audio channels

I'm trying to play a QuickTime file with eight separate audio channels but they only play in stereo...... the same QT file will play all 8 channels separately in Qlab, which has separate level controls for each channel, and which "sees" my Digidesign 002 audio interface. But QT does not recognize the interface, nor does Audio MIDI Setup utility, apparently..... it will play all 8 channels mixed to stereo through channels 1 and 2

The following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

Part II - Playing Ping-Pong ... now with KaLin?

Similar Messages

Maybe you are looking for