Part Number for parallel cable connecting SCXI-2400 to SCXI-1200

If no longer available from NI, would anyone have the (upper) rear connector pinout for the SCXI-2400 so I can make my own cable using half of a DB-25 parallel printer cable and the appropriate AMP connector?

Hi,
I'm not sure which of the two connectors is the upper one, but there are two connections. One of them uses an RS-232 cable connection and the other is just a 4 wire RS-485 terminal block connector. The latter of the two has a pinout shown here in this article. Here is another useful article that addresses setting up your chassis. I hope this helps.
Chris W
Message Edited by Chris W. on 02-12-2009 04:52 PM

Similar Messages

  • HBA / Part Number for 3100 array connect to Sun 420 R

    Hi
    I need to connect the 420R server to 3100 array. What type of HBA is needed and part number if anybody has.
    Thanks
    Srini

    Hello Srini,
    just review the Full Components Lists of the E420R and StorEdge 3120 for supported SCSI controllers.
    http://sunsolve.sun.com/handbook_pub/Systems/E420R/E420R.html
    http://sunsolve.sun.com/handbook_pub/Systems/3120_R/3120_R.html
    Michael

  • Nq615av - part number for screen replacement cable

    Hi can anyone help?
    What is the part number for screen cable fpr pavillion dv6t-2000   NQ615AV  - part number for screen replacement cable . Cant find it on support page
    http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=NQ615AV
    Thanks in advance

    Hi,
    Correct number (574554-001) is listed under PC Board section in the link which you posted.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • How to get longer cable connecting SCXI-1000 to DAQ-6036E?

    Hello,
    Our chassis SCXI-1000 is about 5 to 7 meter away from the DAQ6036E host computer. But the maximum length of the cable seems to be 2 meter from NI. So are there any solution for my quesition? Can we make one or does NI have the middle-link to connect 2 or more cable together?
    thanks
    feilong

    An SCXI chassis can be cabled up to 10m away from the host PC using a shielded 68 pin cable:
    http://digital.ni.com/public.nsf/websearch/B30DF2FE6B6C2E2786256A62005BADE2?OpenDocument
    NI does sell a 10m cable - see this webpage:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/11799
    The part number for the cable appears to be 184749-10.
    Regards,
    Logan

  • What is the correct part number for dvi to vga adapter for macbook pro model A1260

    Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
    My adapter has reached the end of useful life.
    Thanks!

    You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
    The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
    The DVI connector  connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
    http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
    You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

  • Bluetooth module part number for pavilion dv7 4080us ?

    I have a pavilion dv7 4080us.  Its a great machine but am surprised not to find bluetooth.  I see other machines have it and assume it is a part.  I have installed bluetooth modules in other laptops pretty easily - but I cannot find a part number for this machine to order etc. 

    Hi:
    Below is the service manual for your notebook.
    http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02476547/c02476547.pdf
    You will need to order both the bluetooth module and the bluetooth cable. Part numbers for these are on page 21 of Chapter 3.
    The installation procedure is in Chapter 4, page 82. Part numbers again listed on page 82.  Looks like you have to take a lot of stuff off including the display.
    Paul

  • Looking for spare part number for Touch Smart 9300

    The problem is the RJ45 connection does not show up in devices, have swapped out assemblies and others work fine in that kiosk.  Have installed in other kiosks and problem follows the device assembly. 
    The device assembly is a little module that has USB connections and a RJ45 network connection on it.  We just need the little assembly, we've tried ordering the system board but it does not come with it.  Does anyone know of the HP spare parts number for this piece?
    Thanks in advance!

    Please see if you can identify the part using these two HP resources;
    HP PartSurfer for TouchSmart 9300 Elite
    HP Illustrated Parts & Service Map for TouchSmart 9300 Elite
    I think the part you need is either;
    I/O board with DataPort, with IR 670183-001
    or
    I/O board with DataPort, w/no IR 670184-001
    These boards plug in near the "button" CMOS CR2032 battery.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Satellite Pro P100: What is the Toshiba part number for a 2GB memory module

    Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
    What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
    http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
    Crucial Memory gives me this module - is that correct?
    http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
    Found this via Kingstons site - is this also correct?
    http://www.dabs.com/productview.aspx?QuickLinx=4P3V
    Would really appreciate some official clarification here.
    Many Thanks

    It must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
    Anyway I recommend you to buy high quality product like Kingston modules.

  • What is the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw)?

    I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
    This question was solved.
    View Solution.

    Good question.
    That I don't have a definite 100% answer to.
    It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
    You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
    Paul

  • What is the correct part number for the LCD inverter board for an A1138 15" powerBook G4 ( 1.67GHz superdrive/ Hi-res)?

    What is the correct part number for the LCD inverter board for an A1138 15" PowerBook G4 ( 1.67GHz superdrive/ Hi-res model)?

    Hello,
    Part number 614-0305-A
    Hope this helps.

  • Part number for hp officejet 8600 feed roller

    I have a  HP OfficeJet pro 8600 . What is the part number for the cassette feed roller ? Mine has ripped apart.

    Hi Babs,
    Unfortunately, there is not a separate brightness setting for the number pad.  If it is too bright for you, you might try turning down the brightness some in the setting you found earlier.
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

  • Part Number for Bluetooth 2.0 module

    Does anyone have the part number for a Bluetooth 2.0 module for the Mac Pro?
    I want to make sure I don't end up with the older version 1.1.
    The part number I've been told to use is Model A1115, but one service site says that's a version 1.1 module, while the seller and another site say it is the 2.0 module.
    I can't find anything at apple.com which lists the part numbers, though I might know where to look.

    Updated information (why can't we edit our posts any more?):
    The part number I'm looking at is, well, several numbers on the module:
    7C748005XUZ4A
    ANATEL:0786-05-1993
    003NY05015 0000
    Model A1115
    FCC ID: BCGA1115
    IC: 579C-A1115
    Again, I'm trying to figure out what version of Bluetooth this module is.

  • What's the Part Number for an IdeaPad S12 recovery disk?

    Hello,
    I have an IdeaPad S12 (NVidia Ion). The recovery partition is gone. What's the part number for the recovery disk?
    I mainly work with ThinkPad systems and Lenovo has an excellent part number system that covers just about every part you could imagine on a ThinkPad laptop. I assume Lenovo is also using this or something similar for it's consumer-line laptops. Sadly, Lenovo doesn't treat it's consumer laptop line with the same dignity as the ThinkPad line, and no customer support agent would tell me the part number, so I'm resorting to the forum for finding it.
    Please help.

    Hi and welcome,
    the ideapad as consumer-line has no part list ....as the thinkpads have...
    regards KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • What is Toshiba part number for Satellite Pro L20

    Morning
    Does anyone happen to know the Toshiba Part Number for the Satellite Pro L20? I seem to have mislaid mine.
    Thanks
    Si

    Hi
    I dont know which number you mean exactly but there are many different Satellite Pro L20 models which different numbers.
    All necessary details and serial numbers you will find on the label which was placed at the bottom of the unit. Please check this.
    If you need these details for part ordering or recovery cd you should contact the Toshiba service partner. There you can order all supported parts.

  • How do I determine the correct part number for a replacement topecase with keyboard?

    What is the correct replacement part number for a Macbook 13" Core 2 Duo (Identifier 4,1) s/n
           W88*****0P0 ?
    <Edited by Host>

    Hi PePe
    I made the change and it worked as I wanted it. Thanks a lot.
    You say there's no need to Maintain the Responsibilities Rule. Can I ask what this section does and why it can be one or the other?
    Regards
    Declan

Maybe you are looking for

  • Reg Different PO currencies

    Hi We have currency maintained as USD for a vendor but buyers place PO in Mexicon dollers for few materials for same vendor and in USD for few other materials How i can i achieve that in info record i can choose my desired currency but while creating

  • PCI card

    I have a PCI card in my old G4 power mac. When I tried to fit it in my newer mac, which is a powermac g5 - the card doesn't appear to fit. It's a PCI card, but the little notch is in the slot to put it in. Is there any cure? This is a Delta 66 - enab

  • Inspection Lot Error QA 186

    Hi, When i do good receipt for Purchase Order i have got this meesage for only one purchase order item. Other items are posted with out any issue for the same material and Inspection lot also created.  No inspection lot could be created for item 0001

  • SPMenu Field for sharepoint document library

    I have written code where it will show the Sharepoint document library in sp grid view.It is showing the grid but i want the default spmenu field for the type icon. please see the attached image. Below is the code of mine private void CreateBoundFiel

  • Looking for a case that will keep 30GB warm in winter

    I use my 30GB (or at least try to use) when outside snowblowing the driveway. But due to cold weather the battery drains and stops working. Any cases or solutions to avoid this? Thanks